MIB Viewer

ELECTROLINE-DVM-CONFIG-MIB

23 objects
No module-level DESCRIPTION found.
Imported Objects
DOCS-IF-MIB-- RFC 4001 TenthdB TenthdBmV
ELECTROLINE-DVM-ROOT-MIBdvmConfiguration
INET-ADDRESS-MIB-- RFC 3411 InetAddress InetAddressType
RFC1155-SMINetworkAddress
RFC1213-MIBDisplayString
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCRowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.5802.1.3.1.3.2.1IdentitydvmCfgGlobalcurrentGroup of configuration objects related to all DVM models
1.3.6.1.4.1.5802.1.3.1.3.2.1.1IdentitydvmCfgEmscurrentThis sub-tree contains configuration information for trap management.
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1TablecfgEmsAddressTableread-writecurrentThis is the list of ip addresses of the Element Management System(s) to which the DVM will send its AlarmEvent traps. The entries in this table are stored in n…
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1RowcfgEmsAddressEntrynot-accessiblecurrentEMS entry definition
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.1ColumncfgEmsAddressIndexread-onlycurrentIndex into the EMS address table
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.2ColumncfgEmsAddressIPread-writecurrentIP address of the EMS server that will receive traps. If the EMS server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is used only to have a…
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.3ColumncfgEmsAddressTrapPortNumberread-writecurrentThis represents the Ems's port number to which the trap will be sent to. The default value is the common SNMP trap port (162).
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.4ColumncfgEmsAddressTyperead-writecurrentThe address type of the EMS server. Values: unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.5ColumncfgEmsAddressread-writecurrentIP address of the destination EMS that will receive traps. If the message server is unknown, return the zero- length address string.
1.3.6.1.4.1.5802.1.3.1.3.2.1.1.1.1.6ColumncfgEmsAddressProtocolread-writecurrentThis MIB can be used to remotely restore the factory default values, thus overwriting any other setup values that were stored in the DVM's non-volatile memory.…
1.3.6.1.4.1.5802.1.3.1.3.2.1.2ScalardvmCfgResetToFactoryread-writecurrentThis MIB can be used to remotely restore the factory default values, thus overwriting any other setup values that were stored in the DVM's non-volatile memory.…
1.3.6.1.4.1.5802.1.3.1.3.2.1.3ScalardvmCfgUsbModeread-writecurrentThis MIB controls the behavior of the USB port. In craft mode, the USB port has a default MAC address which enables a PC to be connected locally to any DVM wit…
1.3.6.1.4.1.5802.1.3.1.3.2.1.4ScalardvmChannelBondingEnableread-writecurrentEnables or disables the support of channel bonding. The value of this MIB is stored in non-volatile memory.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5IdentitydvmCfgFpgacurrentThis sub-tree contains configuration information For the FPGA chipset.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1IdentitydvmCfgFpgaSoftwarecurrentThis sub-tree contains control to perform a software update on the FPGA chipset.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.1ScalardvmCfgFpgaSwServerAddressTyperead-writecurrentThe type of address of the TFTP server used for software upgrades. Values: unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.2ScalardvmCfgFpgaSwServerread-writecurrentThe address of the TFTP server used for software upgrades. If the TFTP server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is used only to …
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.3ScalardvmCfgFpgaSwServerAddressread-writecurrentThe address of the TFTP server used for software upgrades. If the TFTP server is unknown, return the zero- length address string.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.4ScalardvmCfgFpgaSwFilenameread-writecurrentThe filename of the software image to be downloaded via TFTP for the FPGA. If unknown, the value of this object is the zero-length string.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.5ScalardvmCfgFpgaSwDloadNowread-writecurrentIf set to true, a TFTP download will begin which will load the FPGA image from the TFTP server specified in dvmCfgFpgaSwServerAddress using the file specified …
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.6ScalardvmCfgFpgaSwDloadStatusread-onlycurrentIndicates the status of the last (or current) FPGA firmware image download attempt.
1.3.6.1.4.1.5802.1.3.1.3.2.1.5.1.7ScalardvmCfgFpgaSwCurrentVersread-onlycurrentThe software version currently operating in the FPGA device.
1.3.6.1.4.1.5802.1.3.1.3.2.1.6ScalardvmCfgSystemTrapEnginFilterread-writecurrentOID use for comparaison with each OID parameter filter from NMS address list - TLV38