EQL-DCB-MIB
235 objects
Data Center Bridging MIB module. Copyright (c) 2010-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. Copyright (C) IEEE (2009). This version of this MIB module is published as clause 17.7 of IEEE Std 802.1Qaz; see the standard itself for full legal notices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.19 | IdentityeqlDcbMib | Data Center Bridging MIB module. Copyright (c) 2010-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used ex… | ||
| 1.3.6.1.4.1.12740.19.1 | NodeeqlDcbMIBObjects | |||
| 1.3.6.1.4.1.12740.19.1.1 | TableeqlDcbStaticIfTable | not-accessible | current | EqualLogic-Persistent A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters. |
| 1.3.6.1.4.1.12740.19.1.1.1 | RoweqlDcbStaticIfEntry | not-accessible | current | An entry in the DCB table, containing information about DCB on a single interface. |
| 1.3.6.1.4.1.12740.19.1.1.1.1 | ColumneqlDcbxConfigTCSupportedTxEnable | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.2 | ColumneqlDcbxConfigETSConfigurationTxEnable | read-write | current | The eqlDcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organi… |
| 1.3.6.1.4.1.12740.19.1.1.1.3 | ColumneqlDcbxConfigETSRecommendationTxEnable | read-write | current | The eqlDcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organ… |
| 1.3.6.1.4.1.12740.19.1.1.1.4 | ColumneqlDcbxConfigPFCTxEnable | read-write | current | The eqlDcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally de… |
| 1.3.6.1.4.1.12740.19.1.1.1.5 | ColumneqlDcbxConfigAppPriorityTxEnable | read-write | current | The eqlDcbxConfigAppPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizatio… |
| 1.3.6.1.4.1.12740.19.1.1.1.6 | ColumneqlDcbxConfigQcnTxEnable | read-write | current | The eqlDcbxConfigQcnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally de… |
| 1.3.6.1.4.1.12740.19.1.1.1.7 | ColumneqlDcbxAdminTCSupported | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.8 | ColumneqlDcbxAdminETSConMaxTCG | read-write | current | Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported. |
| 1.3.6.1.4.1.12740.19.1.1.1.9 | ColumneqlDcbxAdminETSConWilling | read-write | current | Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. |
| 1.3.6.1.4.1.12740.19.1.1.1.10 | ColumneqlDcbxAdminETSConTrafficClassGroupBandwidthTable | read-write | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.1.1.11 | ColumneqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable | read-write | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.1.1.12 | ColumneqlDcbxAdminPFCWilling | read-write | current | Indicates if the local system is willing to accept the PFC configuration of the remote system. |
| 1.3.6.1.4.1.12740.19.1.1.1.13 | ColumneqlDcbxAdminPFCMBC | read-write | current | Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled. |
| 1.3.6.1.4.1.12740.19.1.1.1.14 | ColumneqlDcbxAdminPFCCap | read-write | current | Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. |
| 1.3.6.1.4.1.12740.19.1.1.1.15 | ColumneqlDcbxAdminAppPriorityWilling | read-write | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.12740.19.1.1.1.16 | ColumneqlDcbxConfigAutoDetectVLANEnable | read-write | current | Enable automatic detection of VLAN ID. |
| 1.3.6.1.4.1.12740.19.1.1.1.17 | ColumneqlDcbxConfigVLANId | read-write | current | VLAN ID to use for DCB. |
| 1.3.6.1.4.1.12740.19.1.1.1.18 | ColumneqlDcbxAdminETSConTrafficClassGroupPri0 | read-write | current | Indicates the traffic class group to which priority 0 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.19 | ColumneqlDcbxAdminETSConTrafficClassGroupPri1 | read-write | current | Indicates the traffic class group to which priority 1 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.20 | ColumneqlDcbxAdminETSConTrafficClassGroupPri2 | read-write | current | Indicates the traffic class group to which priority 2 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.21 | ColumneqlDcbxAdminETSConTrafficClassGroupPri3 | read-write | current | Indicates the traffic class group to which priority 3 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.22 | ColumneqlDcbxAdminETSConTrafficClassGroupPri4 | read-write | current | Indicates the traffic class group to which priority 4 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.23 | ColumneqlDcbxAdminETSConTrafficClassGroupPri5 | read-write | current | Indicates the traffic class group to which priority 5 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.24 | ColumneqlDcbxAdminETSConTrafficClassGroupPri6 | read-write | current | Indicates the traffic class group to which priority 6 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.25 | ColumneqlDcbxAdminETSConTrafficClassGroupPri7 | read-write | current | Indicates the traffic class group to which priority 7 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.26 | ColumneqlDcbxAdminPFCEnableEnabledPri0 | read-write | current | Indicates if PFC is enabled on priority 0 |
| 1.3.6.1.4.1.12740.19.1.1.1.27 | ColumneqlDcbxAdminPFCEnableEnabledPri1 | read-write | current | Indicates if PFC is enabled on priority 1 |
| 1.3.6.1.4.1.12740.19.1.1.1.28 | ColumneqlDcbxAdminPFCEnableEnabledPri2 | read-write | current | Indicates if PFC is enabled on priority 2 |
| 1.3.6.1.4.1.12740.19.1.1.1.29 | ColumneqlDcbxAdminPFCEnableEnabledPri3 | read-write | current | Indicates if PFC is enabled on priority 3 |
| 1.3.6.1.4.1.12740.19.1.1.1.30 | ColumneqlDcbxAdminPFCEnableEnabledPri4 | read-write | current | Indicates if PFC is enabled on priority 4 |
| 1.3.6.1.4.1.12740.19.1.1.1.31 | ColumneqlDcbxAdminPFCEnableEnabledPri5 | read-write | current | Indicates if PFC is enabled on priority 5 |
| 1.3.6.1.4.1.12740.19.1.1.1.32 | ColumneqlDcbxAdminPFCEnableEnabledPri6 | read-write | current | Indicates if PFC is enabled on priority 6 |
| 1.3.6.1.4.1.12740.19.1.1.1.33 | ColumneqlDcbxAdminPFCEnableEnabledPri7 | read-write | current | Indicates if PFC is enabled on priority 7 |
| 1.3.6.1.4.1.12740.19.1.1.1.34 | ColumneqlDcbxAdminAppPriorityiSCSITxEnable | read-write | current | Indicates whether or not the iSCSI application priority entry is transmitted as part ot the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.35 | ColumneqlDcbxAdminAppPriorityiSCSIProtocol | read-write | current | The protocol indicator used for iSCSI in the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.36 | ColumneqlDcbxAdminAppPriorityiSCSIPriority | read-write | current | The priority value used for iSCSI in the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.37 | ColumneqlDcbxAdminAppPriorityFCoETxEnable | read-write | current | Indicates whether or not the FCoE application priority entry is transmitted as part ot the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.38 | ColumneqlDcbxAdminAppPriorityFCoEProtocol | read-write | current | The protocol indicator used for FCoE in the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.39 | ColumneqlDcbxAdminAppPriorityFCoEPriority | read-write | current | The priority value used for FCoE in the Application Priority TLV. |
| 1.3.6.1.4.1.12740.19.1.1.1.40 | ColumneqlDcbxConfigDCBEnable | read-write | current | Indicates whether or not DCB is enabled for this interface |
| 1.3.6.1.4.1.12740.19.1.1.1.41 | ColumneqlDcbxConfigDCBX101Enable | read-write | current | Indicates whether or not the transmit of DCBX 1.01 TLVs is enabled. |
| 1.3.6.1.4.1.12740.19.1.1.1.42 | ColumneqlDcbxConfigDCBXIEEEDraftEnable | read-write | current | Indicates whether or not the transmit of DCBX IEEE 802.1Qaz draft TLVs is enabled. |
| 1.3.6.1.4.1.12740.19.1.1.1.43 | ColumneqlDcbxConfigQcnSubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.44 | ColumneqlDcbxConfigETSConSubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.45 | ColumneqlDcbxConfigETSRecoSubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.46 | ColumneqlDcbxConfigPFCSubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.47 | ColumneqlDcbxConfigAppPrioritySubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.48 | ColumneqlDcbxConfigTCSupportedSubtype | read-write | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.1.1.49 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri0 | read-write | current | Indicates the traffic class group to which priority 0 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.50 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri1 | read-write | current | Indicates the traffic class group to which priority 1 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.51 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri2 | read-write | current | Indicates the traffic class group to which priority 2 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.52 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri3 | read-write | current | Indicates the traffic class group to which priority 3 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.53 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri4 | read-write | current | Indicates the traffic class group to which priority 4 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.54 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri5 | read-write | current | Indicates the traffic class group to which priority 5 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.55 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri6 | read-write | current | Indicates the traffic class group to which priority 6 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.56 | ColumneqlDcbxAdminETSRecoTrafficClassGroupPri7 | read-write | current | Indicates the traffic class group to which priority 7 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.1.1.57 | ColumneqlDcbCnGlobalMasterEnable | read-write | current | The state of the congestion notification feature on this bridge component or system. If true, Congestion notification is enabled, and if false, congestion noti… |
| 1.3.6.1.4.1.12740.19.1.1.1.58 | ColumneqlDcbCnRpPortPriMaxRps | read-write | current | An integer controlling the maximum number of Reaction Points allowed for this CNPV on this Port. An end station SHALL not create more than this many Reaction P… |
| 1.3.6.1.4.1.12740.19.1.1.1.59 | ColumneqlDcbCnRpgEnablePri0 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.60 | ColumneqlDcbCnRpgEnablePri1 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.61 | ColumneqlDcbCnRpgEnablePri2 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.62 | ColumneqlDcbCnRpgEnablePri3 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.63 | ColumneqlDcbCnRpgEnablePri4 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.64 | ColumneqlDcbCnRpgEnablePri5 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.65 | ColumneqlDcbCnRpgEnablePri6 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.66 | ColumneqlDcbCnRpgEnablePri7 | read-write | current | Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled va… |
| 1.3.6.1.4.1.12740.19.1.1.1.67 | ColumneqlDcbCnRpgTimeReset | read-write | current | This object controls the value for all of the state machine variables, rpgTimeReset, used to reset the timers RpWhile. |
| 1.3.6.1.4.1.12740.19.1.1.1.68 | ColumneqlDcbCnRpgByteReset | read-write | current | This object controls the value for all of the state machine variables, rpgByteReset, used to reset the counters rpByteCount. |
| 1.3.6.1.4.1.12740.19.1.1.1.69 | ColumneqlDcbCnRpgThreshold | read-write | current | This object controls the number of times rpByteStage or rpTimeStage can count before the RP rate control state machine advances states. |
| 1.3.6.1.4.1.12740.19.1.1.1.70 | ColumneqlDcbCnRpgMaxRate | read-write | current | This object controls the maximum rate, in multiples of 1 Mbit/s, at which an RP can transmit. Default value is the speed of the port. A system SHALL support a … |
| 1.3.6.1.4.1.12740.19.1.1.1.71 | ColumneqlDcbCnRpgAiRate | read-write | current | This object controls the transmission rate increment in the RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mbit/s. This rate includes all bits consequ… |
| 1.3.6.1.4.1.12740.19.1.1.1.72 | ColumneqlDcbCnRpgHaiRate | read-write | current | This object controls the transmission rate increment in the RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mbit/s. This rate includes all bits consequ… |
| 1.3.6.1.4.1.12740.19.1.1.1.73 | ColumneqlDcbCnRpgGd | read-write | current | This object controls the number of bits that the value of the Quantized Feedback field received in a CNM PDU is shifted to the right to decrease rpTargetRate. … |
| 1.3.6.1.4.1.12740.19.1.1.1.74 | ColumneqlDcbCnRpgMinDecFac | read-write | current | This object controls the minimum factor by which the current RP transmit rate rpCurrentRate can be changed by reception of a Congestion Notification Message. I… |
| 1.3.6.1.4.1.12740.19.1.1.1.75 | ColumneqlDcbCnRpgMinRate | read-write | current | This object controls the minimum transmission rate (rpgMinRate) in multiples of 1 Mbit/s. A system SHALL support a value for this object that is no larger than… |
| 1.3.6.1.4.1.12740.19.1.1.1.76 | ColumneqlDcbDefaultiSCSIPriority | read-write | current | The default priority value used for iSCSI when no priority value is negotiated through DCBX. |
| 1.3.6.1.4.1.12740.19.1.1.1.77 | ColumneqlDcbDefaultFCoEPriority | read-write | current | The default priority value used for FCoE when no priority value is negotiated through DCBX. |
| 1.3.6.1.4.1.12740.19.1.1.1.78 | ColumneqlDcbxAdminETSConTsaTc0 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.79 | ColumneqlDcbxAdminETSConTsaTc1 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.80 | ColumneqlDcbxAdminETSConTsaTc2 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.81 | ColumneqlDcbxAdminETSConTsaTc3 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.82 | ColumneqlDcbxAdminETSConTsaTc4 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.83 | ColumneqlDcbxAdminETSConTsaTc5 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.84 | ColumneqlDcbxAdminETSConTsaTc6 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.85 | ColumneqlDcbxAdminETSConTsaTc7 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.86 | ColumneqlDcbxAdminETSRecoTsaTc0 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.87 | ColumneqlDcbxAdminETSRecoTsaTc1 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.88 | ColumneqlDcbxAdminETSRecoTsaTc2 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.89 | ColumneqlDcbxAdminETSRecoTsaTc3 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.90 | ColumneqlDcbxAdminETSRecoTsaTc4 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.91 | ColumneqlDcbxAdminETSRecoTsaTc5 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.92 | ColumneqlDcbxAdminETSRecoTsaTc6 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.1.1.93 | ColumneqlDcbxAdminETSRecoTsaTc7 | read-write | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2 | TableeqlDcbDynamicIfTable | not-accessible | current | EqualLogic-Dynamic A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters. |
| 1.3.6.1.4.1.12740.19.1.2.1 | RoweqlDcbDynamicIfEntry | not-accessible | current | An entry in the DCB table, containing information about DCB on a single interface. |
| 1.3.6.1.4.1.12740.19.1.2.1.1 | ColumneqlDcbPfcRequestsSent | read-only | current | A count of the invoked PFC M_CONTROL.request primitives. |
| 1.3.6.1.4.1.12740.19.1.2.1.2 | ColumneqlDcbPfcIndicationsReceived | read-only | current | A count of the received PFC M_CONTROL.indication primitives. |
| 1.3.6.1.4.1.12740.19.1.2.1.3 | ColumneqlDcbxLocTCSupported | read-only | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.2.1.4 | ColumneqlDcbxLocETSConMaxTCG | read-only | current | Indicates the number of Traffic Class Groups supported on the local system. A value of 0 indicates that 8 Traffic Class Groups are supported. |
| 1.3.6.1.4.1.12740.19.1.2.1.5 | ColumneqlDcbxLocETSConWilling | read-only | current | Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. |
| 1.3.6.1.4.1.12740.19.1.2.1.6 | ColumneqlDcbxLocETSConTrafficClassGroupBandwidthTable | read-only | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.2.1.7 | ColumneqlDcbxLocETSRecoTrafficClassGroupBandwidthTable | read-only | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.2.1.8 | ColumneqlDcbxLocPFCWilling | read-only | current | Indicates if the local system is willing to accept the PFC configuration of the remote system. |
| 1.3.6.1.4.1.12740.19.1.2.1.9 | ColumneqlDcbxLocPFCMBC | read-only | current | Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled. |
| 1.3.6.1.4.1.12740.19.1.2.1.10 | ColumneqlDcbxLocPFCCap | read-only | current | Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic … |
| 1.3.6.1.4.1.12740.19.1.2.1.11 | ColumneqlDcbxLocAppPriorityWilling | read-only | current | Indicates if the local system is willing to accept the Application Priority configuration of the remote system. |
| 1.3.6.1.4.1.12740.19.1.2.1.12 | ColumneqlDcbxRemTCSupported | read-only | deprecated | This field is deprecated. |
| 1.3.6.1.4.1.12740.19.1.2.1.13 | ColumneqlDcbxRemETSConMaxTCG | read-only | current | Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported. |
| 1.3.6.1.4.1.12740.19.1.2.1.14 | ColumneqlDcbxRemETSConWilling | read-only | current | Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system. |
| 1.3.6.1.4.1.12740.19.1.2.1.15 | ColumneqlDcbxRemETSConTrafficClassGroupBandwidthTable | read-only | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.2.1.16 | ColumneqlDcbxRemETSRecoTrafficClassGroupBandwidthTable | read-only | current | Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each o… |
| 1.3.6.1.4.1.12740.19.1.2.1.17 | ColumneqlDcbxRemPFCWilling | read-only | current | Indicates if the remote system is willing to accept the PFC configuration of the local system. |
| 1.3.6.1.4.1.12740.19.1.2.1.18 | ColumneqlDcbxRemPFCMBC | read-only | current | Indicates if the remote system is capable of bypassing MACSEC processing when MACSEC is disabled. |
| 1.3.6.1.4.1.12740.19.1.2.1.19 | ColumneqlDcbxRemPFCCap | read-only | current | Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic… |
| 1.3.6.1.4.1.12740.19.1.2.1.20 | ColumneqlDcbxRemAppPriorityWilling | read-only | current | Indicates if the remote system is willing to accept the Application Priority configuration of the local system. |
| 1.3.6.1.4.1.12740.19.1.2.1.21 | ColumneqlDcbxLocETSConTrafficClassGroupPri0 | read-only | current | Indicates the traffic class group to which priority 0 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.22 | ColumneqlDcbxLocETSConTrafficClassGroupPri1 | read-only | current | Indicates the traffic class group to which priority 1 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.23 | ColumneqlDcbxLocETSConTrafficClassGroupPri2 | read-only | current | Indicates the traffic class group to which priority 2 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.24 | ColumneqlDcbxLocETSConTrafficClassGroupPri3 | read-only | current | Indicates the traffic class group to which priority 3 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.25 | ColumneqlDcbxLocETSConTrafficClassGroupPri4 | read-only | current | Indicates the traffic class group to which priority 4 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.26 | ColumneqlDcbxLocETSConTrafficClassGroupPri5 | read-only | current | Indicates the traffic class group to which priority 5 is to be assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.27 | ColumneqlDcbxLocETSConTrafficClassGroupPri6 | read-only | current | Indicates the traffic class group to which priority 6 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.28 | ColumneqlDcbxLocETSConTrafficClassGroupPri7 | read-only | current | Indicates the traffic class group to which priority 7 is assigned. |
| 1.3.6.1.4.1.12740.19.1.2.1.29 | ColumneqlDcbxLocPFCEnableEnabledPri0 | read-only | current | Indicates if PFC is enabled on priority 0 |
| 1.3.6.1.4.1.12740.19.1.2.1.30 | ColumneqlDcbxLocPFCEnableEnabledPri1 | read-only | current | Indicates if PFC is enabled on priority 1 |
| 1.3.6.1.4.1.12740.19.1.2.1.31 | ColumneqlDcbxLocPFCEnableEnabledPri2 | read-only | current | Indicates if PFC is enabled on priority 2 |
| 1.3.6.1.4.1.12740.19.1.2.1.32 | ColumneqlDcbxLocPFCEnableEnabledPri3 | read-only | current | Indicates if PFC is enabled on priority 3 |
| 1.3.6.1.4.1.12740.19.1.2.1.33 | ColumneqlDcbxLocPFCEnableEnabledPri4 | read-only | current | Indicates if PFC is enabled on priority 4 |
| 1.3.6.1.4.1.12740.19.1.2.1.34 | ColumneqlDcbxLocPFCEnableEnabledPri5 | read-only | current | Indicates if PFC is enabled on priority 5 |
| 1.3.6.1.4.1.12740.19.1.2.1.35 | ColumneqlDcbxLocPFCEnableEnabledPri6 | read-only | current | Indicates if PFC is enabled on priority 6 |
| 1.3.6.1.4.1.12740.19.1.2.1.36 | ColumneqlDcbxLocPFCEnableEnabledPri7 | read-only | current | Indicates if PFC is enabled on priority 7 |
| 1.3.6.1.4.1.12740.19.1.2.1.37 | ColumneqlDcbxLocVLANId | read-only | current | VLAN ID to use for DCB. |
| 1.3.6.1.4.1.12740.19.1.2.1.38 | ColumneqlDcbxLocVLANState | read-only | current | State of VLAN tagging. |
| 1.3.6.1.4.1.12740.19.1.2.1.39 | ColumneqlDcbxLocDCBState | read-only | current | Current state of DCB. |
| 1.3.6.1.4.1.12740.19.1.2.1.40 | ColumneqlDcbxLocPFCState | read-only | current | Current state of DCB feature PFC. |
| 1.3.6.1.4.1.12740.19.1.2.1.41 | ColumneqlDcbxLocETSState | read-only | current | Current state of DCB feature ETS. |
| 1.3.6.1.4.1.12740.19.1.2.1.42 | ColumneqlDcbxLocQCNState | read-only | current | Current state of DCB feature QCN. |
| 1.3.6.1.4.1.12740.19.1.2.1.43 | ColumneqlDcbxLociSCSIPriority | read-only | current | Current iSCSI priority. |
| 1.3.6.1.4.1.12740.19.1.2.1.44 | ColumneqlDcbxLocFCoEPriority | read-only | current | Current state of DCB feature QCN. |
| 1.3.6.1.4.1.12740.19.1.2.1.45 | ColumneqlDcbxLocBytesRxPri0 | read-only | current | Count of bytes recevied on priority 0. |
| 1.3.6.1.4.1.12740.19.1.2.1.46 | ColumneqlDcbxLocBytesRxPri1 | read-only | current | Count of bytes recevied on priority 1. |
| 1.3.6.1.4.1.12740.19.1.2.1.47 | ColumneqlDcbxLocBytesRxPri2 | read-only | current | Count of bytes recevied on priority 2. |
| 1.3.6.1.4.1.12740.19.1.2.1.48 | ColumneqlDcbxLocBytesRxPri3 | read-only | current | Count of bytes recevied on priority 3. |
| 1.3.6.1.4.1.12740.19.1.2.1.49 | ColumneqlDcbxLocBytesRxPri4 | read-only | current | Count of bytes recevied on priority 4. |
| 1.3.6.1.4.1.12740.19.1.2.1.50 | ColumneqlDcbxLocBytesRxPri5 | read-only | current | Count of bytes recevied on priority 5. |
| 1.3.6.1.4.1.12740.19.1.2.1.51 | ColumneqlDcbxLocBytesRxPri6 | read-only | current | Count of bytes recevied on priority 6. |
| 1.3.6.1.4.1.12740.19.1.2.1.52 | ColumneqlDcbxLocBytesRxPri7 | read-only | current | Count of bytes recevied on priority 7. |
| 1.3.6.1.4.1.12740.19.1.2.1.53 | ColumneqlDcbxLocBytesTxPri0 | read-only | current | Count of bytes transmitted on priority 0. |
| 1.3.6.1.4.1.12740.19.1.2.1.54 | ColumneqlDcbxLocBytesTxPri1 | read-only | current | Count of bytes transmitted on priority 1. |
| 1.3.6.1.4.1.12740.19.1.2.1.55 | ColumneqlDcbxLocBytesTxPri2 | read-only | current | Count of bytes transmitted on priority 2. |
| 1.3.6.1.4.1.12740.19.1.2.1.56 | ColumneqlDcbxLocBytesTxPri3 | read-only | current | Count of bytes transmitted on priority 3. |
| 1.3.6.1.4.1.12740.19.1.2.1.57 | ColumneqlDcbxLocBytesTxPri4 | read-only | current | Count of bytes transmitted on priority 4. |
| 1.3.6.1.4.1.12740.19.1.2.1.58 | ColumneqlDcbxLocBytesTxPri5 | read-only | current | Count of bytes transmitted on priority 5. |
| 1.3.6.1.4.1.12740.19.1.2.1.59 | ColumneqlDcbxLocBytesTxPri6 | read-only | current | Count of bytes transmitted on priority 6. |
| 1.3.6.1.4.1.12740.19.1.2.1.60 | ColumneqlDcbxLocBytesTxPri7 | read-only | current | Count of bytes transmitted on priority 7. |
| 1.3.6.1.4.1.12740.19.1.2.1.61 | ColumneqlDcbCnRpPortPriCreatedRpsPri0 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.62 | ColumneqlDcbCnRpPortPriCreatedRpsPri1 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.63 | ColumneqlDcbCnRpPortPriCreatedRpsPri2 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.64 | ColumneqlDcbCnRpPortPriCreatedRpsPri3 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.65 | ColumneqlDcbCnRpPortPriCreatedRpsPri4 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.66 | ColumneqlDcbCnRpPortPriCreatedRpsPri5 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.67 | ColumneqlDcbCnRpPortPriCreatedRpsPri6 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.68 | ColumneqlDcbCnRpPortPriCreatedRpsPri7 | read-only | current | This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a… |
| 1.3.6.1.4.1.12740.19.1.2.1.69 | ColumneqlDcbCnRpPortPriCentisecondsPri0 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.70 | ColumneqlDcbCnRpPortPriCentisecondsPri1 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.71 | ColumneqlDcbCnRpPortPriCentisecondsPri2 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.72 | ColumneqlDcbCnRpPortPriCentisecondsPri3 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.73 | ColumneqlDcbCnRpPortPriCentisecondsPri4 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.74 | ColumneqlDcbCnRpPortPriCentisecondsPri5 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.75 | ColumneqlDcbCnRpPortPriCentisecondsPri6 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.76 | ColumneqlDcbCnRpPortPriCentisecondsPri7 | read-only | current | This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE… |
| 1.3.6.1.4.1.12740.19.1.2.1.77 | ColumneqlDcbxLocPfcPausePri0 | read-only | current | Number of time PFC pause frames received for priority 0. |
| 1.3.6.1.4.1.12740.19.1.2.1.78 | ColumneqlDcbxLocPfcPausePri1 | read-only | current | Number of time PFC pause frames received for priority 1. |
| 1.3.6.1.4.1.12740.19.1.2.1.79 | ColumneqlDcbxLocPfcPausePri2 | read-only | current | Number of time PFC pause frames received for priority 2. |
| 1.3.6.1.4.1.12740.19.1.2.1.80 | ColumneqlDcbxLocPfcPausePri3 | read-only | current | Number of time PFC pause frames received for priority 3. |
| 1.3.6.1.4.1.12740.19.1.2.1.81 | ColumneqlDcbxLocPfcPausePri4 | read-only | current | Number of time PFC pause frames received for priority 4. |
| 1.3.6.1.4.1.12740.19.1.2.1.82 | ColumneqlDcbxLocPfcPausePri5 | read-only | current | Number of time PFC pause frames received for priority 5. |
| 1.3.6.1.4.1.12740.19.1.2.1.83 | ColumneqlDcbxLocPfcPausePri6 | read-only | current | Number of time PFC pause frames received for priority 6. |
| 1.3.6.1.4.1.12740.19.1.2.1.84 | ColumneqlDcbxLocPfcPausePri7 | read-only | current | Number of time PFC pause frames received for priority 7. |
| 1.3.6.1.4.1.12740.19.1.2.1.85 | ColumneqlDcbxLocPfcUnpausePri0 | read-only | current | Number of time PFC unpause frames received for priority 0. |
| 1.3.6.1.4.1.12740.19.1.2.1.86 | ColumneqlDcbxLocPfcUnpausePri1 | read-only | current | Number of time PFC unpause frames received for priority 1. |
| 1.3.6.1.4.1.12740.19.1.2.1.87 | ColumneqlDcbxLocPfcUnpausePri2 | read-only | current | Number of time PFC unpause frames received for priority 2. |
| 1.3.6.1.4.1.12740.19.1.2.1.88 | ColumneqlDcbxLocPfcUnpausePri3 | read-only | current | Number of time PFC unpause frames received for priority 3. |
| 1.3.6.1.4.1.12740.19.1.2.1.89 | ColumneqlDcbxLocPfcUnpausePri4 | read-only | current | Number of time PFC unpause frames received for priority 4. |
| 1.3.6.1.4.1.12740.19.1.2.1.90 | ColumneqlDcbxLocPfcUnpausePri5 | read-only | current | Number of time PFC unpause frames received for priority 5. |
| 1.3.6.1.4.1.12740.19.1.2.1.91 | ColumneqlDcbxLocPfcUnpausePri6 | read-only | current | Number of time PFC unpause frames received for priority 6. |
| 1.3.6.1.4.1.12740.19.1.2.1.92 | ColumneqlDcbxLocPfcUnpausePri7 | read-only | current | Number of time PFC unpause frames received for priority 7. |
| 1.3.6.1.4.1.12740.19.1.2.1.93 | ColumneqlDcbxLocETSConTsaTc0 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.94 | ColumneqlDcbxLocETSConTsaTc1 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.95 | ColumneqlDcbxLocETSConTsaTc2 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.96 | ColumneqlDcbxLocETSConTsaTc3 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.97 | ColumneqlDcbxLocETSConTsaTc4 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.98 | ColumneqlDcbxLocETSConTsaTc5 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.99 | ColumneqlDcbxLocETSConTsaTc6 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.100 | ColumneqlDcbxLocETSConTsaTc7 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.101 | ColumneqlDcbxLocETSRecoTsaTc0 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.102 | ColumneqlDcbxLocETSRecoTsaTc1 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.103 | ColumneqlDcbxLocETSRecoTsaTc2 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.104 | ColumneqlDcbxLocETSRecoTsaTc3 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.105 | ColumneqlDcbxLocETSRecoTsaTc4 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.106 | ColumneqlDcbxLocETSRecoTsaTc5 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.107 | ColumneqlDcbxLocETSRecoTsaTc6 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.108 | ColumneqlDcbxLocETSRecoTsaTc7 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.109 | ColumneqlDcbxRemETSConTsaTc0 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.110 | ColumneqlDcbxRemETSConTsaTc1 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.111 | ColumneqlDcbxRemETSConTsaTc2 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.112 | ColumneqlDcbxRemETSConTsaTc3 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.113 | ColumneqlDcbxRemETSConTsaTc4 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.114 | ColumneqlDcbxRemETSConTsaTc5 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.115 | ColumneqlDcbxRemETSConTsaTc6 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.116 | ColumneqlDcbxRemETSConTsaTc7 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.117 | ColumneqlDcbxRemETSRecoTsaTc0 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.118 | ColumneqlDcbxRemETSRecoTsaTc1 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.119 | ColumneqlDcbxRemETSRecoTsaTc2 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.120 | ColumneqlDcbxRemETSRecoTsaTc3 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.121 | ColumneqlDcbxRemETSRecoTsaTc4 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.122 | ColumneqlDcbxRemETSRecoTsaTc5 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.123 | ColumneqlDcbxRemETSRecoTsaTc6 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.124 | ColumneqlDcbxRemETSRecoTsaTc7 | read-only | current | Indicates the transmission selection algorithm which is assigned to this traffic class. |
| 1.3.6.1.4.1.12740.19.1.2.1.125 | ColumneqlDcbxLocDCBMode | read-only | current | Current operating mode of DCB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EqlDcbxAppProtocol | Integer32 (0..65535) | current | Contains the application protocol indicator the type of which is specified by an object with the syntax of EqlDcbxAppSelector |
| EqlDcbxAppSelector | INTEGER { asEthertype(0), asTCPPortNumber(1), asUDPPortNumber(2), asTCPUDPPortNumber(3), asNotTCPUDPPortNumber(4) } | current | Indicates the contents of a protocol object 0: Ethertype 1: TCP Port number 2: UDP Port number 3: Port number over both TCP and UDP 4: Port number over neither TCP nor UDP |
| EqlDcbxMode | INTEGER { off(0), dcbx101Baseline(1), dcbxIeeeStandard(2) } | current | Indicates the current operating mode of DCB. |
| EqlDcbxState | INTEGER { off(0), on(1), disabled(2) } | current | Indicates the current state of a DCB feature. |
| EqlDcbxSupportedCapacity | Integer32 (0..8) | current | Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight but may have fewer supported. |
| EqlDcbxTrafficClassGroupValue | Integer32 (0..7) | current | Indicates a traffic class group. Values 0-7 correspond to traffic class groups. |
| EqlDcbxTransmissionSelectionAlgorithm | INTEGER { tsaStrictPriority(0), tsaCreditBasedShaper(1), tsaEnhancedTransmission(2), tsaVendorSpecific(255) } | current | Indicates the Transmission Selection Algorithm 0: Strict priority 1: Credit-based shaper 2: Enhanced transmission selection 3-254: Reserved 255: Vendor-specific. |
| EqlDcbxVlanState | INTEGER { off(0), static(1), dynamic(2) } | current | Indicates the current state of VLAN tagging. |
| EqlIEEE8021PriorityValue | Unsigned32 (0..7) | current | An 802.1Q user priority value. |
| EqlIEEEDraftSubtypeValue | Unsigned32 (0..255) | current | The sub-type to use within an 802.1Q draft TLV. |
| EqlVlanIdentifier | Unsigned32 (0|1..4094|4095) | current | A value used to identify a VLAN for VLAN tagged frames. |