EXTREME-EAPS-MIB
86 objects
Ethernet Automatic Protection Switching information.
Imported Objects
| EXTREME-BASE-MIB | extremeAgent |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.18 | IdentityextremeEaps | Ethernet Automatic Protection Switching information. | ||
| 1.3.6.1.4.1.1916.1.18.1 | TableextremeEapsTable | not-accessible | current | This table contains EAPS information about all EAPS domains on this device. |
| 1.3.6.1.4.1.1916.1.18.1.1 | RowextremeEapsEntry | not-accessible | current | An individual entry of this table contains EAPS information related to that EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.1 | ColumnextremeEapsName | read-only | current | The EAPS domain name. |
| 1.3.6.1.4.1.1916.1.18.1.1.2 | ColumnextremeEapsMode | read-create | current | This indicates the mode of the EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.3 | ColumnextremeEapsState | read-only | current | This indicates the current EAPS state of this EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.4 | ColumnextremeEapsFailedFlag | read-only | current | This indicates the status of the failed flag. If the failed timer expires while its expiry action is configured to sendAlert, this failed flag is set. It is th… |
| 1.3.6.1.4.1.1916.1.18.1.1.5 | ColumnextremeEapsEnabled | read-create | current | This indicated if this domain has been enabled or not. |
| 1.3.6.1.4.1.1916.1.18.1.1.6 | ColumnextremeEapsPrimaryPort | read-create | current | This indicates the EAPS domain's primary ring-port. Value of 0 indicates the primary port is still not configured |
| 1.3.6.1.4.1.1916.1.18.1.1.7 | ColumnextremeEapsSecondaryPort | read-create | current | This indicates the EAPS domain's secondary ring-port. Value of 0 indicates the secondary port is still not configured |
| 1.3.6.1.4.1.1916.1.18.1.1.8 | ColumnextremeEapsHelloTimer | read-create | current | This indicates the EAPS domain's hello timer's value in seconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.9 | ColumnextremeEapsFailedTimer | read-create | current | This indicates the EAPS domain's failed timer's value in seconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.10 | ColumnextremeEapsFailedTimerExpiryAction | read-create | current | This indicates the action taken by the domain when the fail timer expires. If the action is to sendAlert, then a SNMP trap - extremeEapsFailTimerExpFlagSet - w… |
| 1.3.6.1.4.1.1916.1.18.1.1.11 | ColumnextremeEapsUnconfigRingPort | read-write | current | This specifies which EAPS domain port is being unconfigured. Value of 1, indicates unconfigure the primary port. Value of 2, indicates unconfigure secondary po… |
| 1.3.6.1.4.1.1916.1.18.1.1.12 | ColumnextremeEapsPrimaryStatus | read-only | current | This indicates the status of the EAPS domain's primary ring-port. |
| 1.3.6.1.4.1.1916.1.18.1.1.13 | ColumnextremeEapsSecondaryStatus | read-only | current | This indicates the status of the EAPS domain's secondary ring-port. |
| 1.3.6.1.4.1.1916.1.18.1.1.14 | ColumnextremeEapsProtectedVlansCount | read-only | current | This gives the count of the number of vlans that are being protected by this EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.15 | ColumnextremeEapsRowStatus | read-create | current | The status of this entry as per standard RowStatus conventions. |
| 1.3.6.1.4.1.1916.1.18.1.1.16 | ColumnextremeEapsHelloTimerMs | read-only | current | This indicates the milliseconds portion of the EAPS domain's hello timer value in milliseconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.17 | ColumnextremeEapsPriority | read-create | current | This gives the priority of the domain. Used along with spatial re-use to prioritize handling of domains during a topology change. |
| 1.3.6.1.4.1.1916.1.18.2 | ScalarextremeEapsPrevState | accessible-for-notify | current | This indicates the previous EAPS state of this EAPS domain. Used in state change traps information. |
| 1.3.6.1.4.1.1916.1.18.3 | NodeextremeEapsGlobalInfo | |||
| 1.3.6.1.4.1.1916.1.18.3.1 | ScalarextremeEapsGlobalEnabled | read-write | current | Indicates if EAPS is enabled globally on the switch. |
| 1.3.6.1.4.1.1916.1.18.3.2 | ScalarextremeEapsGlobalFastConvergence | read-write | current | Indicates if Fast Convergence is enabled globally on the switch. |
| 1.3.6.1.4.1.1916.1.18.3.3 | ScalarextremeEapsLastConfigurationChange | read-only | current | Indicates the last time there was any change in EAPS configuration on the switch. |
| 1.3.6.1.4.1.1916.1.18.3.4 | ScalarextremeEapsLastStatusChange | read-only | current | Indicates the last time there was any change in EAPS domain, EAPS port, shared port, or segment status on the switch. Time changes for extremeEapsState, extrem… |
| 1.3.6.1.4.1.1916.1.18.3.5 | ScalarextremeEapsStatusTrapCount | read-only | current | Indicates the number of status traps sent out since the switch booted. Status traps counted include extremeEapsSharedPortStateChange extremeEapsRootBlockerStat… |
| 1.3.6.1.4.1.1916.1.18.3.6 | ScalarextremeEapsGlobalMulticastAddRingPorts | read-write | current | Ring ports are added to existing multicast groups for protected vlans on a topology change event. |
| 1.3.6.1.4.1.1916.1.18.3.7 | ScalarextremeEapsGlobalMulticastSendIGMPQuery | read-write | current | IGMP Query is sent out on all protected vlans on a topology change event. |
| 1.3.6.1.4.1.1916.1.18.3.8 | ScalarextremeEapsGlobalMulticastTempFlooding | read-write | current | Temporary Multicast flooding occurs on all protected vlans on a topology change event. |
| 1.3.6.1.4.1.1916.1.18.3.9 | ScalarextremeEapsGlobalMulticastTempFloodingDuration | read-write | current | The duration at which temporary Multicast flooding will occur. |
| 1.3.6.1.4.1.1916.1.18.4 | TableextremeEapsMbrVlanTable | not-accessible | current | This table contains the control and all protected vlans added to each EAPS domain on this device. There can be only 1 control vlan, while many protected vlans … |
| 1.3.6.1.4.1.1916.1.18.4.1 | RowextremeEapsMbrVlanEntry | not-accessible | current | An individual entry of this table correlates a EAPS domain with a VLAN added to it and its type whether it is control or protected. |
| 1.3.6.1.4.1.1916.1.18.4.1.1 | ColumnextremeEapsMbrVlanName | read-only | current | The member VLAN's name. |
| 1.3.6.1.4.1.1916.1.18.4.1.2 | ColumnextremeEapsMbrVlanType | read-only | current | The member VLAN's type whether it is control or protected. |
| 1.3.6.1.4.1.1916.1.18.4.1.3 | ColumnextremeEapsMbrVlanTag | read-only | current | The member VLAN's Vlan Id tag. |
| 1.3.6.1.4.1.1916.1.18.4.1.4 | ColumnextremeEapsMbrVlanRowStatus | read-create | current | The status of this entry as per standard RowStatus conventions. |
| 1.3.6.1.4.1.1916.1.18.5 | TableextremeEapsSharedPortTable | not-accessible | current | This table contains all EAPS shared ports configured on this device. |
| 1.3.6.1.4.1.1916.1.18.5.1 | RowextremeEapsSharedPortEntry | not-accessible | current | An individual entry of this table describes the configuration of an EAPS shared port. |
| 1.3.6.1.4.1.1916.1.18.5.1.1 | ColumnextremeEapsSharedPortIfIndex | read-only | current | The ifIndex of a port configured as an EAPS shared port. |
| 1.3.6.1.4.1.1916.1.18.5.1.2 | ColumnextremeEapsSharedPortMode | read-create | current | The configured mode of the EAPS shared port. |
| 1.3.6.1.4.1.1916.1.18.5.1.3 | ColumnextremeEapsSharedPortLinkId | read-create | current | The configured Link Id for the EAPS shared port. Each common link in the entire network will be assigned a unique link Id. Each shared-port instance on either … |
| 1.3.6.1.4.1.1916.1.18.5.1.4 | ColumnextremeEapsSharedPortSegmentTimerExpiryAction | read-create | current | This indicates the action taken by the EAPS Shared port instance when a segment timer expires. If the action is sendAlert, then when the segment timer expires,… |
| 1.3.6.1.4.1.1916.1.18.5.1.5 | ColumnextremeEapsSharedPortState | read-only | current | This indicates the state of the EAPS Shared port instance. The states can be idle(0), ready(1), blocking(2), and preforwarding(3). |
| 1.3.6.1.4.1.1916.1.18.5.1.6 | ColumnextremeEapsSharedPortNbrStatus | read-only | current | This indicates the status of reachabilty to the neighbor on the other end of the Shared-segment. If the neighbor on the other end is reachable with matching li… |
| 1.3.6.1.4.1.1916.1.18.5.1.7 | ColumnextremeEapsSharedPortDomainsCount | read-only | current | This gives the count of the number of EAPS domains that are sharing this shared-port. |
| 1.3.6.1.4.1.1916.1.18.5.1.8 | ColumnextremeEapsSharedPortProtectedVlansCount | read-only | current | This gives the count of the number of vlans that are being protected by this shared-port instance. |
| 1.3.6.1.4.1.1916.1.18.5.1.9 | ColumnextremeEapsSharedPortRootBlockerStatus | read-only | current | If this shared port instance is not in Root blocker state, the status is False. If the shared port is in Root blocker state, and its path detect message is bei… |
| 1.3.6.1.4.1.1916.1.18.5.1.10 | ColumnextremeEapsSharedPortRootBlockerId | read-only | current | This is the Link Id of the Root Blocker in the entire network. If there is no root blocker in the network, this value is 65535. |
| 1.3.6.1.4.1.1916.1.18.5.1.11 | ColumnextremeEapsSharedPortRowStatus | read-create | current | The status of this entry as per standard RowStatus conventions. |
| 1.3.6.1.4.1.1916.1.18.5.1.12 | ColumnextremeEapsSharedPortSegmentHealthInterval | read-only | current | Interval at which health check PDUs are sent out each segment port. |
| 1.3.6.1.4.1.1916.1.18.5.1.13 | ColumnextremeEapsSharedPortSegmentTimeout | read-only | current | Time in seconds where segment fail timer expires, fail flag is set, and expiry action is taken. |
| 1.3.6.1.4.1.1916.1.18.5.1.14 | ColumnextremeEapsSharedPortCommonPathFailedFlag | read-only | current | Shared port link fail timer expired, but our shared port link is up. |
| 1.3.6.1.4.1.1916.1.18.5.1.15 | ColumnextremeEapsSharedPortCommonPathHealthInterval | read-only | current | Interval at which health check PDUs are sent out shared port. |
| 1.3.6.1.4.1.1916.1.18.5.1.16 | ColumnextremeEapsSharedPortCommonPathTimeout | read-only | current | Time in seconds where shared link fail timer expires and fail flag is set |
| 1.3.6.1.4.1.1916.1.18.6 | TableextremeEapsSharedPortSegmentTable | not-accessible | current | This table contains the EAPS shared port's segments information |
| 1.3.6.1.4.1.1916.1.18.6.1 | RowextremeEapsSharedPortSegmentEntry | not-accessible | current | An individual entry of this table describes the EAPS shared port's segment information. It will describe the EAPS domain, the segment's status, and other infor… |
| 1.3.6.1.4.1.1916.1.18.6.1.1 | ColumnextremeEapsSharedPortSegmentPort | read-only | current | The segment port on a segment which is part of an EAPS shared port. |
| 1.3.6.1.4.1.1916.1.18.6.1.2 | ColumnextremeEapsSharedPortSegmentStatus | read-only | current | The status of a segment port which is part of an EAPS shared port. |
| 1.3.6.1.4.1.1916.1.18.6.1.3 | ColumnextremeEapsSharedPortSegmentFailedFlag | read-only | current | The status of the failed flag on a segment port which is part of an EAPS shared port. This flag will be set to TRUE if the segment's fail timer expiry action i… |
| 1.3.6.1.4.1.1916.1.18.6.1.4 | ColumnextremeEapsSharedPortSegmentVlanPortCount | read-only | current | The count of vlan ports being protected under this segment's EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.6.1.5 | ColumnextremeEapsSharedPortSegmentAdjId | read-only | current | The link Id of a neighboring node if the neighbor's shared port instance was in blocking state. |
| 1.3.6.1.4.1.1916.1.18.6.1.6 | ColumnextremeEapsSharedPortSegmentRBD | read-only | current | The Root Blocker Id as determined by the neighboring node's shared port instance. |
| 1.3.6.1.4.1.1916.1.18.7 | TableextremeEapsSharedPortVlanTable | not-accessible | current | This table contains all VLANs protected by the EAPS Shared Port instance. |
| 1.3.6.1.4.1.1916.1.18.7.1 | RowextremeEapsSharedPortVlanEntry | not-accessible | current | An individual entry of this table correlates a EAPS Shared port instance with a VLAN protected by it. |
| 1.3.6.1.4.1.1916.1.18.7.1.1 | ColumnextremeEapsSharedPortVlanName | read-only | current | The vlan being protected under this EAPS Shared port instance |
| 1.3.6.1.4.1.1916.1.18.7.1.2 | ColumnextremeEapsSharedPortVlanPortCount | read-only | current | The count of vlan ports being protected under this vlan |
| 1.3.6.1.4.1.1916.1.18.7.1.3 | ColumnextremeEapsSharedPortVlanActiveOpenPort | read-only | current | Segment port that is Active Open. If there is no Active open port, then this value is 0. |
| 1.3.6.1.4.1.1916.1.18.8 | TableextremeEapsSharedPortVlanPortTable | not-accessible | current | This table contains the EAPS shared port's vlan-port's information |
| 1.3.6.1.4.1.1916.1.18.8.1 | RowextremeEapsSharedPortVlanPortEntry | not-accessible | current | An individual entry of this table describes the EAPS shared port's vlan port information. It will describe the status of the vlan port under its protection. |
| 1.3.6.1.4.1.1916.1.18.8.1.1 | ColumnextremeEapsSharedPortVlanPortStatus | read-only | current | The status of a vlan port which is getting protected by an EAPS shared port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EapsDomainMode | INTEGER { invalid (0), master (1), transit (2) } | current | Indicates the configured mode of an EAPS domain. |
| EapsDomainPortStatus | INTEGER { unknown (0), up (1), down (2), blocked (3) } | current | The operational state of an EAPS domain's ring-ports. If the state is unknown (0), it indicates the domain is still not up yet. The valid states are up(1), down(2), blocked(3). |
| EapsDomainPriority | INTEGER { normal (0), high (1) } | current | Indicates the configured priority of an EAPS domain. |
| EapsDomainState | INTEGER { idle (0), complete (1), failed (2), linksup (3), linkdown (4), preforwarding (5), init (6), precomplete (7), preinit (8) } | current | The operational state of an EAPS domain. The states complete(1), failed(2), init(6), precomplete(7), and preinit(8) apply only to domains configured as master. The states linksup(3), linkdown(4) and preforwarding(5) app… |
| EapsFailTimerExpiryAction | INTEGER { sendAlert (0), openSecondaryPort (1) } | current | The action to take when the failed timer expires. If action is configured to sendAlert(0), and the fail expires, the Master will remain in Complete or Init state, and a trap - extremeEapsFailTimerExpFlagSet - will be se… |
| EapsMbrVlanType | INTEGER { unassigned (0), control (1), protected (2) } | current | Indicates the type of vlan, whether it is control or protected vlan, that is being added to the EAPS domain. |
| EapsPortType | INTEGER { primary (1), secondary (2) } | current | Indicates the ring port of the EAPS domains. The ring port can be primary or secondary. This is used to specify which port is being unconfigured. |
| EapsRingPort | INTEGER (0..2147483647) | current | This represents an EAPS ring-port. |
| EapsSharedPortMode | INTEGER { unconfigured (0), controller (1), partner (2) } | current | If the mode is unconfigured(0), it indicates the EAPS shared port's mode has yet to be configured. The valid configured modes of an EAPS Shared-port are controller(1) and partner(2) |
| EapsSharedPortNeighborStatus | INTEGER { neighborDown (0), neighborUp (1), neighborError (2) } | current | The operational status of an EAPS Shared-port's neighbor reachabilty. The states are neighborDown(0), neighborUp(1), and neighborError(2). |
| EapsSharedPortRootBlockerStatus | INTEGER { false (0), active (1), inactive (2) } | current | The operational status of an EAPS Shared-port's Root- Blocker. The states are false(0), active(1), and inactive(2). |
| EapsSharedPortSegmentStatus | INTEGER { unknown (0), segUp (1), segDown (2), segBlockingUp (3), segBlockingDown (4) } | current | The operational status of an EAPS Shared-port's segments. The states are unknown(0), segUp(1), segDown(2), segBlockingUp(3) and segBlockingDown(4). |
| EapsSharedPortSegmentTimerExpiryAction | INTEGER { sendAlert (0), segmentDown (1) } | current | The action to take when the EAPS Shared-port's segment timer expires. If action is configured to sendAlert(0), and the segment timer expires, the segment's status will remain in Up state, and a trap - extremeEapsSegment… |
| EapsSharedPortState | INTEGER { idle (0), ready (1), blocking (2), preforwarding (3) } | current | The operational state of an EAPS Shared-Port instance. The states are idle(0), ready(1), blocking(2), and preforwarding(3). |
| EapsSharedPortVlanPortStatus | INTEGER { unknown (0), activeOpen (1), blocked (2), open (3), down (4) } | current | The operational status of an EAPS Shared-port's vlan-port. The states are unknown(0), activeOpen(1), blocked(2), open(3) and down(4). |