MIB Viewer

EXTREME-POS-MIB

74 objects
Extreme POS objects: objects common to POS MIBs
Imported Objects
EXTREME-BASE-MIBextremeAgent PortList
RFC1213-MIBDisplayString
SNMPv2-SMIIpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.1916.1.20IdentityextremePOSMibExtreme POS objects: objects common to POS MIBs
1.3.6.1.4.1.1916.1.20.1NodeextremeAps
1.3.6.1.4.1.1916.1.20.1.1NodeextremeApsConfig
1.3.6.1.4.1.1916.1.20.1.1.1ScalarextremeApsConfigEnabledread-onlycurrentGlobal APS enablement
1.3.6.1.4.1.1916.1.20.1.1.2TableextremeApsGroupConfigTablenot-accessiblecurrentThis table contains configuration information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.1.2.1RowextremeApsGroupConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.2.1.1ColumnextremeApsGroupConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.2.1.2ColumnextremeApsGroupConfigRevertModeread-onlycurrentThe revertive mode configured for the APS group. This indicates whether APS will switch-back automatically after the working line error is cleared. In non-reve…
1.3.6.1.4.1.1916.1.20.1.1.2.1.3ColumnextremeApsGroupConfigRevertMinutesread-onlycurrentThe number of minutes APS will wait after the error has been cleared before switching back to the working line. During this interval, the K1 request will indic…
1.3.6.1.4.1.1916.1.20.1.1.2.1.4ColumnextremeApsGroupConfigDirectionread-onlycurrentThe directional mode configured for the APS group. This indicates whether protection switches are coordinated between both POS equipment and ADM (bidirectional…
1.3.6.1.4.1.1916.1.20.1.1.2.1.5ColumnextremeApsGroupConfigTimerIntervalread-onlycurrentThe number of seconds between APS out-of-band peer protocol hello messages. This value is relevant when the working line and protection line exist is physicall…
1.3.6.1.4.1.1916.1.20.1.1.2.1.6ColumnextremeApsGroupConfigTimerMissesread-onlycurrentThe number of APS out-of-band peer protocol messages transmitted without receiving a response before the protection switch declares the working switch inoperab…
1.3.6.1.4.1.1916.1.20.1.1.2.1.7ColumnextremeApsGroupConfigAuthenticateread-onlycurrentWhen enabled, the authentication string on both working and protection switches must match.
1.3.6.1.4.1.1916.1.20.1.1.2.1.8ColumnextremeApsGroupConfigAuthStringread-onlycurrentIf configured, this is the authentication string that must match between working and protection switches. This field is relevant if the APS group is configured…
1.3.6.1.4.1.1916.1.20.1.1.3TableextremeApsPortConfigTablenot-accessiblecurrentThis table contains configuration information for APS ports.
1.3.6.1.4.1.1916.1.20.1.1.3.1RowextremeApsPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.3.1.1ColumnextremeApsPortConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.3.1.2ColumnextremeApsPortConfigPortNumberread-onlycurrentThe value of ifIndex that identifies the port.
1.3.6.1.4.1.1916.1.20.1.1.3.1.3ColumnextremeApsPortConfigPortTyperead-onlycurrentThe port type designation.
1.3.6.1.4.1.1916.1.20.1.1.4TableextremeApsProtectPortConfigTablenot-accessiblecurrentThis table contains configuration information for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.1.4.1RowextremeApsProtectPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.1.4.1.1ColumnextremeApsProtectPortConfigGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.4.1.2ColumnextremeApsProtectPortConfigPortNumberread-onlycurrentThe value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.1.4.1.3ColumnextremeApsProtectPortConfigWorkingIpAddrread-onlycurrentThe IP address of the working switch. If the working and protection lines reside on the same chassis, this IP address will be a local address.
1.3.6.1.4.1.1916.1.20.1.2NodeextremeApsStatus
1.3.6.1.4.1.1916.1.20.1.2.1TableextremeApsGroupTablenot-accessiblecurrentThis table contains run-time information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.2.1.1RowextremeApsGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.2.1.1.1ColumnextremeApsGroupGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.1.1.2ColumnextremeApsGroupActivePortread-onlycurrentThe APS port which is currently carrying the network traffic.
1.3.6.1.4.1.1916.1.20.1.2.1.1.3ColumnextremeApsGroupEffectiveDirectionread-onlycurrentThe effective directional mode for the APS group. When this value differs from the configured directional mode, check the ADM and switch provisioning for a mis…
1.3.6.1.4.1.1916.1.20.1.2.1.1.4ColumnextremeApsGroupPeerProtoStatusread-onlycurrentThe APS out-of-band peer protocol status for a group.
1.3.6.1.4.1.1916.1.20.1.2.2TableextremeApsProtectPortTablenot-accessiblecurrentThis table contains run-time information by defined APS protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1RowextremeApsProtectPortEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.2.2.1.1ColumnextremeApsProtectPortGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.2.1.2ColumnextremeApsProtectPortPortNumberread-onlycurrentThe value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.3ColumnextremeApsProtectPortTransmitK1read-onlycurrentThe K1 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.4ColumnextremeApsProtectPortTransmitK2read-onlycurrentThe K2 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.5ColumnextremeApsProtectPortReceiveK1read-onlycurrentThe K1 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.6ColumnextremeApsProtectPortReceiveK2read-onlycurrentThe K2 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.7ColumnextremeApsProtectPortSwitchInitByWorkingread-onlycurrentThe number of switches that have been initiated by the working-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.8ColumnextremeApsProtectPortSwitchInitByProtectread-onlycurrentThe number of switches that have been initiated by the protection-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.9ColumnextremeApsProtectPortSwitchInitByADMread-onlycurrentThe number of switches that have been initiated by the ADM.
1.3.6.1.4.1.1916.1.20.1.2.2.1.10ColumnextremeApsProtectPortSwitchInitByCmdread-onlycurrentThe number of switches that have been initiated by an external CLI command.
1.3.6.1.4.1.1916.1.20.1.2.2.1.11ColumnextremeApsProtectPortSuccessfulSwitchesread-onlycurrentThe number of successful APS line switches.
1.3.6.1.4.1.1916.1.20.1.2.2.1.12ColumnextremeApsProtectPortHelloProtFailsread-onlycurrentThe number of APS out-of-band peer protocol failures recorded. This situation causes the protection-line router to initiate a line switch.
1.3.6.1.4.1.1916.1.20.1.3NodeextremeApsErrors
1.3.6.1.4.1.1916.1.20.1.3.1TableextremeApsLineErrorTablenot-accessiblecurrentThis table contains APS line error information.
1.3.6.1.4.1.1916.1.20.1.3.1.1RowextremeApsLineErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.3.1.1.1ColumnextremeApsLineErrorGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.1.1.2ColumnextremeApsLineErrorPortNumberread-onlycurrentThe ifIndex value which identifies the APS port.
1.3.6.1.4.1.1916.1.20.1.3.1.1.3ColumnextremeApsLineErrorSignalDegradeActiveread-onlycurrentIndicates whether a signal degrade condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.4ColumnextremeApsLineErrorBERSignalDegradeActiveread-onlycurrentIndicates whether a signal degrade condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.5ColumnextremeApsLineErrorSignalFailActiveread-onlycurrentIndicates whether a signal fail condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.6ColumnextremeApsLineErrorBERSignalFailActiveread-onlycurrentIndicates whether a signal fail condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.7ColumnextremeApsLineErrorSignalDegradesread-onlycurrentThe number of signal degrades that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.8ColumnextremeApsLineErrorBERSignalDegradesread-onlycurrentThe number of signal degrades due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.9ColumnextremeApsLineErrorSignalFailsread-onlycurrentThe number of signal fails that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.10ColumnextremeApsLineErrorBERSignalFailsread-onlycurrentThe number of signal fails due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.2TableextremeApsProtocolErrorTablenot-accessiblecurrentThis table contains APS protocol error information. These errors are relevant for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.3.2.1RowextremeApsProtocolErrorEntrynot-accessiblecurrent
1.3.6.1.4.1.1916.1.20.1.3.2.1.1ColumnextremeApsProtocolErrorGroupNumberread-onlycurrentThe group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.2.1.2ColumnextremeApsProtocolErrorPortNumberread-onlycurrentThe ifIndex value which identifies the APS protection port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.3ColumnextremeApsProtocolErrorModeMismatchDefectread-onlycurrentIndicates whether a Mode Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.4ColumnextremeApsProtocolErrorProtSwitchByteDefectread-onlycurrentIndicates whether a Protection Switching Byte defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.5ColumnextremeApsProtocolErrorChannelMismatchDefectread-onlycurrentIndicates whether a Channel Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.6ColumnextremeApsProtocolErrorFarEndProtectDefectread-onlycurrentIndicates whether a Far-End Protection defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.7ColumnextremeApsProtocolErrorModeMismatchFailureread-onlycurrentIndicates whether a Mode Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.8ColumnextremeApsProtocolErrorProtSwitchByteFailureread-onlycurrentIndicates whether a Protection Switching Byte failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.9ColumnextremeApsProtocolErrorChannelMismatchFailureread-onlycurrentIndicates whether a Channel Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.10ColumnextremeApsProtocolErrorFarEndProtectFailureread-onlycurrentIndicates whether a Far-End Protection failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.11ColumnextremeApsProtocolErrorModeMismatchNumFailsread-onlycurrentThe number of Mode Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.12ColumnextremeApsProtocolErrorProtSwitchByteNumFailsread-onlycurrentThe number of Protection Switching Byte failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.13ColumnextremeApsProtocolErrorChannelMismatchNumFailsread-onlycurrentThe number of Channel Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.14ColumnextremeApsProtocolErrorFarEndProtectNumFailsread-onlycurrentThe number of Far-End Protection failures that have been recorded.
MIB Viewer