EXTREME-SERVICES-MIB
39 objects
Extreme Upper layer services objects
Imported Objects
| EXTREME-BASE-MIB | extremeAgent |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.26 | IdentityextremeServices | Extreme Upper layer services objects | ||
| 1.3.6.1.4.1.1916.1.26.1 | NodeextremeSyslog | |||
| 1.3.6.1.4.1.1916.1.26.1.1 | TableextremeRemoteSyslogServerTable | not-accessible | current | This table is used to configure remote syslog servers and contains information on the same. |
| 1.3.6.1.4.1.1916.1.26.1.1.1 | RowextremeRemoteSyslogServerEntry | not-accessible | current | An entry in the extremeRemoteSyslogServerTable. |
| 1.3.6.1.4.1.1916.1.26.1.1.1.1 | ColumnextremeRemoteSyslogServerAddressType | read-only | current | The type of address specified in the object 'extremeRemoteSyslogServerAddress'. Currently, only 'ipv4' and 'dns' are supported. |
| 1.3.6.1.4.1.1916.1.26.1.1.1.2 | ColumnextremeRemoteSyslogServerAddress | read-only | current | The address of the remote syslog server. This can be a DNS name or an IPv4 address. |
| 1.3.6.1.4.1.1916.1.26.1.1.1.3 | ColumnextremeRemoteSyslogServerPort | read-only | current | The UDP port number of the remote syslog server to which syslog messages will be sent. |
| 1.3.6.1.4.1.1916.1.26.1.1.1.4 | ColumnextremeRemoteSyslogServerFacility | read-only | current | The facility which will be sent in all syslog messages to this remote syslog server. |
| 1.3.6.1.4.1.1916.1.26.1.1.1.5 | ColumnextremeRemoteSyslogServerSeverity | read-create | current | The syslog message severity. All syslog messages of the specified severity for which the Bits are set, will be sent to this syslog server. When setting this ob… |
| 1.3.6.1.4.1.1916.1.26.1.1.1.6 | ColumnextremeRemoteSyslogServerStatus | read-create | current | The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the va… |
| 1.3.6.1.4.1.1916.1.26.1.2 | ScalarextremeEnableRemoteSyslog | read-write | current | The enable/disable status of remote syslog messages. |
| 1.3.6.1.4.1.1916.1.26.3 | NodeextremeDNS | |||
| 1.3.6.1.4.1.1916.1.26.3.1 | TableextremeDNSServerTable | not-accessible | current | This table is used to configure DNS servers. There can be at most two rows in this table. |
| 1.3.6.1.4.1.1916.1.26.3.1.1 | RowextremeDNSServerEntry | not-accessible | current | An entry in the extremeDNSServerTable. |
| 1.3.6.1.4.1.1916.1.26.3.1.1.1 | ColumnextremeDNSServerAddressIndex | not-accessible | current | This is an integer index. Only 1 and 2 are supported for this |
| 1.3.6.1.4.1.1916.1.26.3.1.1.2 | ColumnextremeDNSServerAddressType | read-only | current | The address type of the DNS server. This can be a DNS name or an IPv4 address. |
| 1.3.6.1.4.1.1916.1.26.3.1.1.3 | ColumnextremeDNSServerAddress | read-only | current | The address of the DNS server. This can be a DNS name or an IPv4 address. |
| 1.3.6.1.4.1.1916.1.26.4 | NodeextremeAuthServer | |||
| 1.3.6.1.4.1.1916.1.26.4.1 | TableextremeAuthServerEnableTable | not-accessible | current | This table is used to enable/disable Auth servers |
| 1.3.6.1.4.1.1916.1.26.4.1.1 | RowextremeAuthServerEnableEntry | not-accessible | current | An entry in the extremeAuthServerEnableTable. |
| 1.3.6.1.4.1.1916.1.26.4.1.1.1 | ColumnextremeAuthServerEnableServerType | not-accessible | current | Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server |
| 1.3.6.1.4.1.1916.1.26.4.1.1.2 | ColumnextremeAuthServerEnableAccessType | not-accessible | current | Specifies whether this server is for management access or netlogin access. |
| 1.3.6.1.4.1.1916.1.26.4.1.1.3 | ColumnextremeAuthServerEnable | read-write | current | Enable/Disable the Radius/tacas Server |
| 1.3.6.1.4.1.1916.1.26.4.2 | TableextremeAuthServerTable | not-accessible | current | This table is used to configure radius/tacacs servers. |
| 1.3.6.1.4.1.1916.1.26.4.2.1 | RowextremeAuthServerEntry | not-accessible | current | An entry in the extremeAuthServerTable. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.1 | ColumnextremeAuthServerIndex | not-accessible | current | Integer index of the server. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.2 | ColumnextremeAuthServerAddressType | read-write | current | Type IP address of the radius/tacas server. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.3 | ColumnextremeAuthServerAddress | read-write | current | IP address of the radius/tacas server. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.4 | ColumnextremeAuthServerClientAddressType | read-write | current | Type of IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one… |
| 1.3.6.1.4.1.1916.1.26.4.2.1.5 | ColumnextremeAuthServerClientAddress | read-write | current | IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its … |
| 1.3.6.1.4.1.1916.1.26.4.2.1.6 | ColumnextremeAuthServerPort | read-write | current | Port number of the radius/tacas server. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.7 | ColumnextremeAuthServerSecret | read-write | current | This is the shared secret between the Authenticator and radius/tacas server. This is logically write-only. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.8 | ColumnextremeAuthServerReTransmit | read-write | current | This is the timeout in seconds after which the Authenticator will re transmit requests to the radius/tacas server. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.9 | ColumnextremeAuthServerType | read-write | current | Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server |
| 1.3.6.1.4.1.1916.1.26.4.2.1.10 | ColumnextremeAuthServerIsPrimary | read-write | current | Specifies whether this is the primary or the secondary server. Is TRUE if the server is primary. |
| 1.3.6.1.4.1.1916.1.26.4.2.1.11 | ColumnextremeAuthServerAccessType | read-write | current | Specifies whether this server is for management access or netlogin access |
| 1.3.6.1.4.1.1916.1.26.4.2.1.12 | ColumnextremeAuthServerStatus | read-create | current | The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the va… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AuthServerAccessType | INTEGER { mgmt-access(1), netlogin(2) } | current | Specifies whether the server is for authenticating mangement or netlogin accesses |
| AuthServerType | INTEGER { radius(1), radius-acct(2), tacacs(3), tacacs-acct(4) } | current | The type of authentication/accounting server. |