MIB Viewer

EXTREME-SYSTEM-MIB

181 objects
Extreme System objects: objects common to all platforms
Imported Objects
EXTREME-BASE-MIBextremeAgent PortList
RFC1213-MIBDisplayString ifDescr sysDescr sysUpTime
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.1916.1.1IdentityextremeSystemExtreme System objects: objects common to all platforms
1.3.6.1.4.1.1916.1.1.1NodeextremeSystemCommon
1.3.6.1.4.1.1916.1.1.1.3ScalarextremeSaveConfigurationread-writecurrentWhen this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value…
1.3.6.1.4.1.1916.1.1.1.4ScalarextremeSaveStatusread-onlycurrentThis object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this o…
1.3.6.1.4.1.1916.1.1.1.5ScalarextremeCurrentConfigInUseread-onlycurrentShows which NVRAM configuration store was used at last boot.
1.3.6.1.4.1.1916.1.1.1.6ScalarextremeConfigToUseOnRebootread-writecurrentControls which NVRAM configuration store will be used on next reboot.
1.3.6.1.4.1.1916.1.1.1.7ScalarextremeOverTemperatureAlarmread-onlycurrentAlarm status of overtemperature sensor in device enclosure.
1.3.6.1.4.1.1916.1.1.1.8ScalarextremeCurrentTemperatureread-onlycurrentCurrent temperature in degrees celcius measured inside device enclosure.
1.3.6.1.4.1.1916.1.1.1.9TableextremeFanStatusTablenot-accessiblecurrentTable of operational status of all internal cooling fans.
1.3.6.1.4.1.1916.1.1.1.9.1RowextremeFanStatusEntrynot-accessiblecurrentEntry in table of all internal cooling fans.
1.3.6.1.4.1.1916.1.1.1.9.1.1ColumnextremeFanNumberread-onlycurrentIdentifier of cooling fan, numbered from the front and/or left side of device.
1.3.6.1.4.1.1916.1.1.1.9.1.2ColumnextremeFanOperationalread-onlycurrentOperational status of a cooling fan.
1.3.6.1.4.1.1916.1.1.1.9.1.3ColumnextremeFanEntPhysicalIndexread-onlycurrentThe entity index for this fan entity in the entityPhysicalTable table of the entity MIB.
1.3.6.1.4.1.1916.1.1.1.9.1.4ColumnextremeFanSpeedread-onlycurrentThe speed (RPM) of a cooling fan in the fantray.
1.3.6.1.4.1.1916.1.1.1.10ScalarextremePrimaryPowerOperationalread-onlycurrentOperational status of internal power supply of a device.
1.3.6.1.4.1.1916.1.1.1.11ScalarextremeRedundantPowerStatusread-onlycurrentOperational status of an external redundant power supply to a device.
1.3.6.1.4.1.1916.1.1.1.12ScalarextremeRedundantPowerAlarmread-onlycurrentAlarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
1.3.6.1.4.1.1916.1.1.1.13ScalarextremePrimarySoftwareRevread-onlycurrentThe software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This …
1.3.6.1.4.1.1916.1.1.1.14ScalarextremeSecondarySoftwareRevread-onlycurrentThe software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. Thi…
1.3.6.1.4.1.1916.1.1.1.15ScalarextremeImageToUseOnRebootread-writecurrentControls which image will be used on next reboot.
1.3.6.1.4.1.1916.1.1.1.16ScalarextremeSystemIDread-onlycurrentThis represents the System ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.17ScalarextremeSystemBoardIDread-onlycurrentThis represents the Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.18ScalarextremeSystemLeftBoardIDread-onlycurrentThis represents the Left Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.19ScalarextremeSystemRightBoardIDread-onlycurrentThis represents the Right Board ID of the Summit Switch.
1.3.6.1.4.1.1916.1.1.1.20ScalarextremeInputPowerVoltageread-onlycurrentThe input power voltage at which the system is currently operating.
1.3.6.1.4.1.1916.1.1.1.21ScalarextremePowerStatusread-onlycurrentOperational status of the power supply to a device.
1.3.6.1.4.1.1916.1.1.1.22ScalarextremePowerAlarmread-onlycurrentAlarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
1.3.6.1.4.1.1916.1.1.1.23ScalarextremeRmonEnableread-writecurrentSetting this to true will cause the agent to start collecting RMON statistics.
1.3.6.1.4.1.1916.1.1.1.25ScalarextremeBootROMVersionread-onlycurrentThe software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid.
1.3.6.1.4.1.1916.1.1.1.26ScalarextremeDot1dTpFdbTableEnableread-writecurrentSetting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed.
1.3.6.1.4.1.1916.1.1.1.27TableextremePowerSupplyTablenot-accessiblecurrentTable of status of all power supplies in the system.
1.3.6.1.4.1.1916.1.1.1.27.1RowextremePowerSupplyEntrynot-accessiblecurrentAn entry indicating the status of a specific power supply.
1.3.6.1.4.1.1916.1.1.1.27.1.1ColumnextremePowerSupplyNumberread-onlycurrentPower supply number.
1.3.6.1.4.1.1916.1.1.1.27.1.2ColumnextremePowerSupplyStatusread-onlycurrentStatus of the power supply.
1.3.6.1.4.1.1916.1.1.1.27.1.3ColumnextremePowerSupplyInputVoltageread-onlycurrentInput voltage of the power supply
1.3.6.1.4.1.1916.1.1.1.27.1.4ColumnextremePowerSupplySerialNumberread-onlycurrentThe serial number of the power supply unit.
1.3.6.1.4.1.1916.1.1.1.27.1.5ColumnextremePowerSupplyEntPhysicalIndexread-onlycurrentThe entity index for this psu entity in the entityPhysicalTable of the entity MIB.
1.3.6.1.4.1.1916.1.1.1.27.1.6ColumnextremePowerSupplyFan1Speedread-onlycurrentThe speed (RPM) of Fan-1 in the power supply unit.
1.3.6.1.4.1.1916.1.1.1.27.1.7ColumnextremePowerSupplyFan2Speedread-onlycurrentThe speed (RPM) of Fan-2 in the power supply unit.
1.3.6.1.4.1.1916.1.1.1.27.1.8ColumnextremePowerSupplySourceread-onlycurrentThe power supply unit input source.
1.3.6.1.4.1.1916.1.1.1.27.1.9ColumnextremePowerSupplyInputPowerUsageread-onlycurrentInput power usage for the given psu slot. The value 0 in this field indicate the power usage is not supported or read failure.
1.3.6.1.4.1.1916.1.1.1.27.1.10ColumnextremePowerMonSupplyNumOutputread-onlycurrentNumber of output sensors in the power supply unit
1.3.6.1.4.1.1916.1.1.1.27.1.11ColumnextremePowerSupplyInputPowerUsageUnitMultiplierread-onlycurrentThe magnitude of watts for the usage value in extremePowerSupplyInputPowerUsage.
1.3.6.1.4.1.1916.1.1.1.28ScalarextremeCpuAggregateUtilizationread-onlydeprecatedThe aggregate CPU utilization since the time the start started executing.
1.3.6.1.4.1.1916.1.1.1.29TableextremeCpuTask2Tablenot-accessibledeprecatedTable of CPU tasks that are active.
1.3.6.1.4.1.1916.1.1.1.29.1RowextremeCpuTask2Entrynot-accessibledeprecatedAn entry in table of describes a single task.
1.3.6.1.4.1.1916.1.1.1.29.1.1ColumnextremeCpuTask2CpuIdnot-accessibledeprecatedCPU on which this task last executed or is executing. The primary CPU has a value of 1.
1.3.6.1.4.1.1916.1.1.1.29.1.2ColumnextremeCpuTask2Namenot-accessibledeprecatedName associated with the reported task id.
1.3.6.1.4.1.1916.1.1.1.29.1.3ColumnextremeCpuTask2Idread-onlydeprecatedTask identifier assigned by the operating system when this task is spawned.
1.3.6.1.4.1.1916.1.1.1.29.1.4ColumnextremeCpuTask2Pcread-onlydeprecatedThe value of the program counter for this task. It indicates the address of the next instruction that would be executed once the operating system resumes this …
1.3.6.1.4.1.1916.1.1.1.29.1.5ColumnextremeCpuTask2Statusread-onlydeprecatedThe current status of the task as reported by the operating system.
1.3.6.1.4.1.1916.1.1.1.29.1.6ColumnextremeCpuTask2Utilizationread-onlydeprecatedThe current CPU utilization by this task. This is the utilization when the task last executed.
1.3.6.1.4.1.1916.1.1.1.29.1.7ColumnextremeCpuTask2MaxUtilizationread-writedeprecatedThe maximum CPU utilization by this task since the time the start started executing. This value may be cleared.
1.3.6.1.4.1.1916.1.1.1.30ScalarextremeAuthFailSrcAddraccessible-for-notifycurrentThe IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap.
1.3.6.1.4.1.1916.1.1.1.31ScalarextremeCpuTransmitPriorityread-writedeprecatedThe CPU transmit priority.
1.3.6.1.4.1.1916.1.1.1.32ScalarextremeImageBootedread-onlycurrentThe image with which the switch was last booted, using which it is currently running.
1.3.6.1.4.1.1916.1.1.1.33ScalarextremeMsmFailoverCauseread-onlycurrentThe cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the failover was initiated by the use…
1.3.6.1.4.1.1916.1.1.1.34TableextremeImageTablenot-accessiblecurrentA table containing information about each software image.
1.3.6.1.4.1.1916.1.1.1.34.1RowextremeImageEntrynot-accessiblecurrentA table entry containing information about each software image.
1.3.6.1.4.1.1916.1.1.1.34.1.1ColumnextremeImageNumberread-onlycurrentA unique integer identifying the particular software image.
1.3.6.1.4.1.1916.1.1.1.34.1.2ColumnextremeMajorVersionread-onlycurrentThe ExtremeWare Release Major Version.
1.3.6.1.4.1.1916.1.1.1.34.1.3ColumnextremeSubMajorVersionread-onlydeprecatedThe ExtremeWare Release Sub-major Version.
1.3.6.1.4.1.1916.1.1.1.34.1.4ColumnextremeMinorVersionread-onlycurrentThe ExtremeWare Release Minor Version.
1.3.6.1.4.1.1916.1.1.1.34.1.5ColumnextremeBuildNumberread-onlycurrentThe ExtremeWare Build Number.
1.3.6.1.4.1.1916.1.1.1.34.1.6ColumnextremeTechnologyReleaseNumberread-onlycurrentThe Technology Release version. This value is zero for all but TR releases.
1.3.6.1.4.1.1916.1.1.1.34.1.7ColumnextremeSustainingReleaseNumberread-onlycurrentThe Sustaining Release number for the ExtremeWare version.
1.3.6.1.4.1.1916.1.1.1.34.1.8ColumnextremeBranchRevisionNumberread-onlycurrentThe incremental build on specified branch.
1.3.6.1.4.1.1916.1.1.1.34.1.9ColumnextremeImageTyperead-onlycurrentThe branch type from which the image was built.
1.3.6.1.4.1.1916.1.1.1.34.1.10ColumnextremeImageDescriptionread-onlycurrentA unique string that can be used to identify the specific patch, technology, or development branch release.
1.3.6.1.4.1.1916.1.1.1.34.1.11ColumnextremeImageSecurityread-onlydeprecatedIndicates whether image was built with ssh. This object is deprecated, the ssh capability can be obtained from the extremeImageSshCapability of the ImageFeatur…
1.3.6.1.4.1.1916.1.1.1.34.1.12ColumnextremePatchVersionread-onlycurrentThe ExtremeWare Release Patch Version.
1.3.6.1.4.1.1916.1.1.1.35TableextremeImageFeatureTablenot-accessiblecurrentA table containing information about the software features.
1.3.6.1.4.1.1916.1.1.1.35.1RowextremeImageFeatureEntrynot-accessiblecurrentA table entry containing information about software features.
1.3.6.1.4.1.1916.1.1.1.35.1.1ColumnextremeImageFeatureNumberread-onlycurrentA unique integer identifying the particular software image.
1.3.6.1.4.1.1916.1.1.1.35.1.2ColumnextremeImageSshCapabilityread-onlycurrentIndicates whether image has ssh capability.
1.3.6.1.4.1.1916.1.1.1.35.1.3ColumnextremeImageUAACapabilityread-onlycurrentIndicates whether image has Wireless(UAA) components.
1.3.6.1.4.1.1916.1.1.1.36ScalarextremeSystemPowerStateread-onlycurrentThe current state of power available.
1.3.6.1.4.1.1916.1.1.1.37ScalarextremeBootTimeread-onlycurrentThe boot time expressed in standard time_t value. When interpreted as an absolute time value, it represents the number of seconds elapsed since 00:00:00 on Jan…
1.3.6.1.4.1.1916.1.1.1.38TableextremePowerSupplyOutputPowerTablenot-accessiblecurrentThe output power supply table per power supply unit.
1.3.6.1.4.1.1916.1.1.1.38.1RowextremePowerSupplyOutputPowerEntrynot-accessiblecurrentAn entry in the power supply output table.
1.3.6.1.4.1.1916.1.1.1.38.1.1ColumnextremePowerSupplyIndexread-onlycurrentPower supply unit slot index
1.3.6.1.4.1.1916.1.1.1.38.1.2ColumnextremePowerSupplyOutputSensorIdxread-onlycurrentPower supply Sensor Index
1.3.6.1.4.1.1916.1.1.1.38.1.3ColumnextremePowerSupplyOutputVoltageread-onlycurrentOutput voltage per sensor for the current psu slot no. 0 in this field tells the psu doesnt support output voltage reading or output voltage read error.
1.3.6.1.4.1.1916.1.1.1.38.1.4ColumnextremePowerSupplyOutputCurrentread-onlycurrentOutput current per sensor for the current psu slot no. 0 in this field tells the psu doesnt support output current reading or output current read error.
1.3.6.1.4.1.1916.1.1.1.38.1.5ColumnextremePowerSupplyOutputUnitMultiplierread-onlycurrentThe magnitude of volts and amps for the usage value in extremePowerSupplyOutputVoltage and extremePowerSupplyOutputCurrent.
1.3.6.1.4.1.1916.1.1.1.39TableextremePowerSupplyUsageTablenot-accessiblecurrentThe power supply usage on each slot.
1.3.6.1.4.1.1916.1.1.1.39.1RowextremePowerSupplyUsageEntrynot-accessiblecurrentAn entry in the power supply usage table.
1.3.6.1.4.1.1916.1.1.1.39.1.1ColumnextremeSlotIndexread-onlycurrentSlot number in the chassis/stack based system.
1.3.6.1.4.1.1916.1.1.1.39.1.2ColumnextremePowerSupplyUsageValueread-onlycurrentPower Usage of the particular slot in the chassis or stack.The power usage is measured in milli-watts.
1.3.6.1.4.1.1916.1.1.1.39.1.3ColumnextremePowerSupplyUnitMultiplierread-onlycurrentThe magnitude of watts for the usage value in extremePowerSupplyUsageValue.
1.3.6.1.4.1.1916.1.1.1.40NodeextremeSystemPowerUsage
1.3.6.1.4.1.1916.1.1.1.40.1ScalarextremeSystemPowerUsageValueread-onlycurrentThe current power usage of the system.In stack mode this variables tells total power usage of the entire system.
1.3.6.1.4.1.1916.1.1.1.40.2ScalarextremeSystemPowerUsageUnitMultiplierread-onlycurrentThe magnitude of watts for the usage value in extremeSystemPowerUsageValue.
1.3.6.1.4.1.1916.1.1.1.41TableextremeSystemPowerMonitorTablenot-accessiblecurrentThe output power supply table per power supply unit.
1.3.6.1.4.1.1916.1.1.1.41.1RowextremeSystemPowerMonitorEntrynot-accessiblecurrentAn entry in the power supply output table.
1.3.6.1.4.1.1916.1.1.1.41.1.1ColumnextremeSystemPowerMonitorIndex1read-onlycurrentReserved can be used for future expansion. currently set to zero.
1.3.6.1.4.1.1916.1.1.1.41.1.2ColumnextremeSystemPowerMonitorPollIntervalread-writecurrentConfigure how often input power is measured. it is configured in seconds. default value is 60 seconds. if 0 is configured then the input power measurement is d…
1.3.6.1.4.1.1916.1.1.1.41.1.3ColumnextremeSystemPowerMonitorReportChangesread-writecurrentconfigure report-changes has none or log or trap or log-and-trap, by default none is configured
1.3.6.1.4.1.1916.1.1.1.41.1.4ColumnextremeSystemPowerMonitorChangeThresholdread-writecurrentconfigure input power change-threshold to initiate report-changes action. By default 2 watts is configured, this field is configured in watts.
1.3.6.1.4.1.1916.1.1.1.42TableextremeRebootTablenot-accessiblecurrentThis group of objects use to initiate a device reboot or contain details of the last reboot operation of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.42.1RowrebootTimeEntrynot-accessiblecurrentThis group of objects use to initiate a device reboot or contain details of the last reboot operation of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.42.1.1ColumnextremeRebootSlotIdread-onlycurrentSpecifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node.
1.3.6.1.4.1.1916.1.1.1.42.1.2ColumnextremeRebootNodeAddressread-writecurrentSpecifies the MAC address of the SummitStack node to be rebooted. NOTE: This object is valid only for Summit X250e and X450 series switches, and SummitStack.
1.3.6.1.4.1.1916.1.1.1.42.1.3ColumnextremeRebootModuleSlotIdread-writecurrentSpecifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can b…
1.3.6.1.4.1.1916.1.1.1.42.1.4ColumnextremeRebootSlotNumberread-writecurrentSpecifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on SummitStack.
1.3.6.1.4.1.1916.1.1.1.42.1.5ColumnextremeRebootAsStandbyread-writecurrentSpecifies that all stack nodes that are to be rebooted are to operate as if configured to not be master-capable. NOTE: This object is valid only for Summit X25…
1.3.6.1.4.1.1916.1.1.1.42.1.6ColumnextremeRebootStackTopologyread-writecurrentSpecifies that the entire SummitStack is to be rebooted whether or not nodes are active. NOTE: This object is valid only for Summit X250e and X450 series switc…
1.3.6.1.4.1.1916.1.1.1.42.1.7ColumnextremeRebootMonthread-writecurrentSpecifies the month that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.8ColumnextremeRebootDayread-writecurrentSpecifies the day that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.9ColumnextremeRebootYearread-writecurrentSpecifies the year that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.10ColumnextremeRebootHourread-writecurrentSpecifies the hour that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.11ColumnextremeRebootMinuteread-writecurrentSpecifies the number of minutes that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.12ColumnextremeRebootSecondsread-writecurrentSpecifies the number of seconds that the reboot is scheduled to start.
1.3.6.1.4.1.1916.1.1.1.42.1.13ColumnextremeRebootCancelread-writecurrentCancels a previously scheduled reboot. Note: This object, when enabled, override all objects associated with a reboot request.
1.3.6.1.4.1.1916.1.1.1.42.1.14ColumnextremeRebootImmediateread-writecurrentIndicates that a reboot should be executed on the target device immediately.
1.3.6.1.4.1.1916.1.1.1.42.1.15ColumnextremeRebootRowStatusread-createcurrentThe existence state of this reboot request. This object follows the row status behavior.
1.3.6.1.4.1.1916.1.1.1.43TableextremeDownloadImageTablenot-accessiblecurrentThis group of objects contain details of the last or the current download image operation of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.43.1RowextremeDownloadImageEntrynot-accessiblecurrentThis group of objects contain details of the last or the current download image operation of one of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.43.1.1ColumnextremeDownloadImageSlotIdread-createcurrentSpecifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node.
1.3.6.1.4.1.1916.1.1.1.43.1.2ColumnextremeDownloadImageStatusread-createcurrentSpecifies the status of the current down load operation.
1.3.6.1.4.1.1916.1.1.1.43.1.3ColumnextremeDownloadImageFilenameread-createcurrentSpecifies the file name of the downloading EXOS image.
1.3.6.1.4.1.1916.1.1.1.43.1.4ColumnextremeDownloadImagePartitionread-createcurrentSpecifies which partition the image should be saved to primary or secondary. Select primary to save the image to the primary partition and secondary to save th…
1.3.6.1.4.1.1916.1.1.1.43.1.5ColumnextremeDownloadImageHostNameread-createcurrentSpecifies the hostname of the TFTP server from which the image should be obtained.
1.3.6.1.4.1.1916.1.1.1.43.1.6ColumnextremeDownloadImageIpaddressread-createcurrentSpecifies the IP address of the TFTP server from which the image should be obtained.
1.3.6.1.4.1.1916.1.1.1.43.1.7ColumnextremeDownloadImageStartTimeread-createcurrentSpecifies the start time (date and time) of the current down load operation.
1.3.6.1.4.1.1916.1.1.1.43.1.8ColumnextremeDownloadImageMemorycardread-createcurrentSpecifies that the image should be obtained from a removable storage device, which can be a compact flash card or a USB 2.0 storage device.
1.3.6.1.4.1.1916.1.1.1.43.1.9ColumnextremeDownloadImageInstallread-createcurrentSpecifies to start the install process after the successful download of the image.
1.3.6.1.4.1.1916.1.1.1.43.1.10ColumnextremeDownloadSlotNumberread-createcurrentSpecifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on stackable switches in …
1.3.6.1.4.1.1916.1.1.1.43.1.11ColumnextremeDownloadModuleSlotIdread-createcurrentSpecifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can b…
1.3.6.1.4.1.1916.1.1.1.43.1.12ColumnextremeDownloadRowStatusread-createcurrentThe existence state of this download image request. This object follows the row status behavior.
1.3.6.1.4.1.1916.1.1.1.44TableextremeInstallImageTablenot-accessiblecurrentThis group of objects contain details of the last or the current install image operation of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.44.1RowextremeInstallImageEntrynot-accessiblecurrentThis group of objects contain details of the last or the current install image operation of one of the switch modules or nodes.
1.3.6.1.4.1.1916.1.1.1.44.1.1ColumnextremeInstallImageSlotIdread-onlycurrentSpecifies the MSM/MM module number of a switch or the slot number currently being used by the active stack node.
1.3.6.1.4.1.1916.1.1.1.44.1.2ColumnextremeInstallImageStatusread-onlycurrentSpecifies the status of the current install image operation.
1.3.6.1.4.1.1916.1.1.1.44.1.3ColumnextremeInstallImageFilenameread-writecurrentSpecifies the software image file.
1.3.6.1.4.1.1916.1.1.1.44.1.4ColumnextremeInstallImagePartitionread-writecurrentSpecifies which partition the image should be saved to: primary or secondary. Select primary to save the image to the primary partition and secondary to save t…
1.3.6.1.4.1.1916.1.1.1.44.1.5ColumnextremeInstallImageStartTimeread-onlycurrentSpecifies the start time of the current install operation.
1.3.6.1.4.1.1916.1.1.1.44.1.6ColumnextremeInstallImageRebootread-writecurrentSpecifies to reboot the switch after the image is installed.
1.3.6.1.4.1.1916.1.1.1.44.1.7ColumnextremeInstallImageModuleSlotIdread-writecurrentSpecifies A or B for an MSM/MM module. - A specifies the MSM/MM installed in slot A. - B specifies the MSM/MM installed in slot B. Note: The modules that can b…
1.3.6.1.4.1.1916.1.1.1.44.1.8ColumnextremeInstallImageSlotNumberread-writecurrentSpecifies the slot number currently being used by the active stack node that is to be rebooted. Note: This variable is available only on stackable switches in …
1.3.6.1.4.1.1916.1.1.1.44.1.9ColumnextremeInstallImageRowStatusread-createcurrentThe existence state of this install image request. This object follows the row status behavior.
1.3.6.1.4.1.1916.1.1.1.45NodeextremeLoadInstallTrap
1.3.6.1.4.1.1916.1.1.1.45.1NodeloadInstallControl
1.3.6.1.4.1.1916.1.1.1.45.1.1ScalardownloadImageTrapEnableread-writecurrentThis variable indicates whether the system produces the downloadImageTrap notification. A no(2) value will prevent notifications from being generated by this s…
1.3.6.1.4.1.1916.1.1.1.45.1.2ScalarinstallImageTrapEnableread-writecurrentThis variable indicates whether the system produces the extremeInstallImageTrap notification. A no(2) value will prevent notifications from being generated by …
1.3.6.1.4.1.1916.1.1.1.45.2NodeloadInstallTraps
1.3.6.1.4.1.1916.1.1.1.45.2.1NotificationdownloadImageTrapcurrentThis notification indicates the status of the last/current download operation.
1.3.6.1.4.1.1916.1.1.1.45.2.2NotificationinstallImageTrapcurrentThis notification indicates the status of the last/current install operation.
1.3.6.1.4.1.1916.1.1.1.48ScalarextremeSaveConfigurationFileNameread-writecurrentThis object is set, along the object extremSaveConfiguration option with value 5.This object indicates the file name to be used while saving the file. On readi…
1.3.6.1.4.1.1916.1.1.1.49ScalarextremeUseOnRebootFileNameread-writecurrentThis object is set, along the object extremeConfigToUseOnReboot option with value 3.This object indicates the file name to be used while saving the file
1.3.6.1.4.1.1916.1.1.2NodeextremeChassisGroup
1.3.6.1.4.1.1916.1.1.2.1ScalarextremeMasterMSMSlotread-onlycurrentThe extremeSlotNumber of the master MSM module.
1.3.6.1.4.1.1916.1.1.2.2TableextremeSlotTablenot-accessiblecurrentA table containing information about each slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1RowextremeSlotEntrynot-accessiblecurrentA table entry containing information about the module in each slot of the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.1ColumnextremeSlotNumberread-onlycurrentA unique integer identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.2ColumnextremeSlotNameread-onlycurrentA name identifying the particular slot in the chassis.
1.3.6.1.4.1.1916.1.1.2.2.1.3ColumnextremeSlotModuleConfiguredTyperead-writecurrentThe configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module i…
1.3.6.1.4.1.1916.1.1.2.2.1.4ColumnextremeSlotModuleInsertedTyperead-onlycurrentThe module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1).
1.3.6.1.4.1.1916.1.1.2.2.1.5ColumnextremeSlotModuleStateread-onlycurrentThe state of the module inserted in this slot.
1.3.6.1.4.1.1916.1.1.2.2.1.6ColumnextremeSlotModuleSerialNumberread-onlycurrentThe serial number of the module inserted in this slot.
1.3.6.1.4.1.1916.1.1.2.3ScalarextremeChassisPortsPerSlotread-onlycurrentThe maximum number of ports that can be accomodated in a single slot. This number would change to accomodate blades with higher port density than current ones.
1.3.6.1.4.1.1916.1.1.3NodeextremeSystemHealthCheck
1.3.6.1.4.1.1916.1.1.3.1ScalarextremeHealthCheckErrorTypeaccessible-for-notifycurrentThe error reported in the system health check trap
1.3.6.1.4.1.1916.1.1.3.2ScalarextremeHealthCheckActionread-onlycurrentThe action/alarm level configured for health check.
1.3.6.1.4.1.1916.1.1.3.3ScalarextremeHealthCheckMaxRetriesread-onlycurrentThe maximum number of times a module restart will be attempted if it fails. If extremeHealthCheckAction is not autorecovery(5), then this value is zero.
1.3.6.1.4.1.1916.1.1.4NodeextremeSystemThresholds
1.3.6.1.4.1.1916.1.1.4.1ScalarextremeCpuUtilRisingThresholdread-writedeprecatedRising threshold for CPU Aggregation utilization trap
1.3.6.1.4.1.1916.1.1.4.2ScalarextremeCpuTaskUtilPairaccessible-for-notifydeprecatedTaskName/CPU_% Util pair reported in CPU Utilization trap
1.3.6.1.4.1.1916.1.1.6NodeextremeSystemNotifications
1.3.6.1.4.1.1916.1.1.6.0NodeextremeSystemTrapsPrefix
1.3.6.1.4.1.1916.1.1.6.0.1NotificationextremeSystemPowerStatuscurrentChange in status of System Power The trap will not be generated for discovering state.
1.3.6.1.4.1.1916.1.1.6.0.2NotificationextremeGenericTrapcurrentSome event took place in the system
1.3.6.1.4.1.1916.1.1.6.0.3NotificationextremePsuPowerStatuscurrentTrap to indicate change in status of Power Supply.
1.3.6.1.4.1.1916.1.1.6.0.4NotificationextremeSystemPowerUsageNotificationcurrentWhenever the power usage is increased/decreased by the configured threshold value then the power usage trap is generated if the trap is enabled..
1.3.6.1.4.1.1916.1.1.7NodeextremeGenericTrapParams
1.3.6.1.4.1.1916.1.1.7.1Scalarseverityaccessible-for-notifycurrentThe severity of the message being sent.
1.3.6.1.4.1.1916.1.1.7.2ScalareventNameaccessible-for-notifycurrentThe event name being sent.
1.3.6.1.4.1.1916.1.1.7.3Scalarmessageaccessible-for-notifycurrentThe message being sent
Type Definitions
NameSyntaxStatusDescription
PowerValueINTEGER { v110 (1), v220 (2), v48DC (3), unknown(4) }currentThe input power value of the switch.
SlotTypeINTEGER { none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), msm(6), f48ti(7), g8xi(8), g8ti(9), g12sxi(10), g12ti(11), msm64i(18), alpine3808(19), alpine3804(20), fm32t(21), gm4x(22), gm4sx(23), gm4t(24), wdm8(25), fm24f(26), fm24sf(27), fm24te(28), f96ti(29), wdm4(30), f32fi(31), tenGig(32), tenGigLR(33), g16x3(34), g24t3(35), gm16x3(36), gm16t3(37), fm16t3(38), fm32p(39), fm8v(50), wm4t1(51), wm4t3(52), wm1t3(53), wm4e1(54), alpine3802(55), p3c(101), p12c(102), arm(103), mpls(104), sma(105), p48c(106), a3c(107), a12c(108), pxm(200), s300fixed(201), msm3(202), msm1(203), msm1xl(204), s300expansion(301), g60t(400), g60x(401), teng6x(402), msm-g8x(414), g8x(415), g48t(416), g48p(417), g24x(418), teng4x(419), teng2x(420), g20x(421), teng2h(422), msm5(425), msm5r(426), gm20t(427), gm20xt(428), gm20xtr(429), xm2x(430), xm2xr(431), msm6r(432), g48te(433), g48ta(434), g48pe(435), g48x(437), x450a-24t(439), x450e-24p(440), x450a-48t(442), x450e-48p(443), x450a-24x(444), x450a-24tdc(445), x450a-24xdc(446), msm-48(447), teng4ca(448), teng4xa(449), g48tc(450), g48te2(451), g48xc(452), g24xc(453), tenG4xc(454), tenG8xc(455), msms48c(456), g8xc(457), tenG1xc(458), g48tcPoE(459), g48te2PoE(460), x450a-48tdc(461), x250e-24t(462), x250e-24p(463), x250e-48t(464), x250e-48p(465), x250e-24x(466), x250e-24xtaa(467), x250e-24tdc(468), x250e-48tdc(469), x250e-24xdc(470), x150-24t(471), x150-24tdc(472), x150-24p(473), x150-48t(474), x150-48tdc(475), x150-48p(476), x150-24x(477), x150-24xdc(478), xm2hr(480), x350-24t(481), x350-48t(482), x650-24t(483), x650-24x(484), x650-24tG4X(485), x650-24xG4X(486), x650-24tG4X10G2S(487), x650-24xG4X10G2S(488), x650-24t10G8X10G2S(489), x650-24x10G8X10G2S(490), x650-24t64G2S(491), x650-24x64G2S(492), x650-24t64G4S(493), x650-24x64G4S(494), mmbase(496), mmadv(497), gm40xb(498), xm8xb(500), x8900msm128(503), x8900tenG24xc(504), x8900tenG8xm(505), x8900g48tm(506), x8900g48xm(507), x8900g96tc(508), x8900g48tmPoE(509), nwie450a(510), x480-24x(511), x480-48x(512), x480-48t(513), x480-24x10G2S(514), x480-48x10G2S(515), x480-48t10G2S(516), x480-24x10G4X(517), x480-48x10G4X(518), x480-48t10G4X(519), x480-24x32G2S(520), x480-48x32G2S(521), x480-48t32G2S(522), x8500msm48(523), x8500g24xa(524), x8500g48te(525), x8500g48tePoE(526), x460-24t(527), x460-24p(528), x460-24x(529), x460-48t(530), x460-48p(531), x460-48x(532), x450e-24t(533), x450e-48t(534), hm-2x24ga(535), xcm88s1(536), xcm8848t(537), xcm88p(538), xcm8824f(539), xcm8808x(540), xcm888f(541), x480-48x20G2S(542), x480-48t20G2S(543), x670-48x(546), x670v-48x(547), e4g-400(548), bdx-mm1(549), bdxa-10g48x(550), bdxa-10g24x(551), bdxa-40g24x(552), bdxa-40g12x(553), bdxa-fm960(554), bdxa-fm480(555), x480-24x20G2S(556), x650-24x40G4X(557), x650-24t40G4X(558), x480-24x40G4X(559), x480-48x40G4X(560), x480-48t40G4X(561), tenG2xc(562), fortyG6xc(563), e4g-200(564), x440-8t(565), x440-8p(566), x440-24t(567), x440-24p(568), x440-48t(569), x440-48p(570), x440-24t-10G(571), x440-24p-10G(572), x440-48t-10G(573), x440-48p-10G(574), ags100-24t(575), ags150-24p(576), x670v-48t(578), x440-L2-24t(579), x440-L2-48t(580), x440-24x(582), x440-48x(583), bdxa-10g48t(584), x430-24t(585), x430-48t(586), x440-24tdc(587), x440-48tdc(588) }currentThe type of the slot. It is used both for the configured as well as the inserted slot types.
UnitMultiplierINTEGER { yocto(-24), zepto(-21), atto(-18), femto(-15), pico(-12), nano(-9), micro(-6), milli(-3), units(0), kilo(3), mega(6), giga(9), tera(12), peta(15), exa(18), zetta(21), yotta(24) }currentThe Unit Multiplier is an integer value that represents the IEEE 61850 Annex A units multiplier associated with the integer units used to measure the power or energy. For example, when used with pmPowerUnitMultiplier, -…
MIB Viewer