EdgeSwitch-POWER-ETHERNET-MIB
23 objects
This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB.
Imported Objects
| EdgeSwitch-REF-MIB | fastPath |
| POWER-ETHERNET-MIB | pethMainPseEntry pethPsePortEntry |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.1.1.15 | IdentityfastPathpowerEthernetMIB | This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objec… | ||
| 1.3.6.1.4.1.4413.1.1.15.1 | NodeagentPethObjects | |||
| 1.3.6.1.4.1.4413.1.1.15.1.1 | TableagentPethPsePortTable | not-accessible | current | A table of per-port information and configuration objects relating to the power status of each port. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1 | RowagentPethPsePortEntry | not-accessible | current | A collection of objects providing additional power information and control parameters for the specified port. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.1 | ColumnagentPethPowerLimit | read-write | current | The configured maximum power this port can provide to an attached device measured in Milliwatts. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.2 | ColumnagentPethOutputPower | read-only | current | The power this port is supplying to an attached device measured in Milliwatts. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.3 | ColumnagentPethOutputCurrent | read-only | current | The current this port is supplying to an attached device measured in Milliamps. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.4 | ColumnagentPethOutputVolts | read-only | current | The voltage this port is supplying to an attached device measured in Volts. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.5 | ColumnagentPethTemperature | read-only | obsolete | The temperature measured at this port of the PoE Controller. It is measured in degree celcius. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.6 | ColumnagentPethPowerLimitType | read-write | current | Describes or controls the maximum power that a port can deliver. A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD atta… |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.7 | ColumnagentPethHighPowerEnable | read-write | current | true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.8 | ColumnagentPethPowerDetectionType | read-write | current | Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive de… |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.9 | ColumnagentPethFaultStatus | read-only | current | Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsA… |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.10 | ColumnagentPethPortReset | read-write | current | A value of reset(1) is used to move the pse port dot3af state to idle. A read on this object will always return the value none(0). The value none(0) can not be… |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.11 | ColumnagentPethPowerLimitMin | read-only | current | The minimum power this port can be configured to provide, measured in Milliwatts. |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.12 | ColumnagentPethPowerLimitMax | read-only | current | The maximum power this port can be configured to provide, measured in Milliwatts. |
| 1.3.6.1.4.1.4413.1.1.15.1.2 | NodeagentPethMainPseObjects | |||
| 1.3.6.1.4.1.4413.1.1.15.1.2.1 | TableagentPethMainPseTable | not-accessible | current | A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support … |
| 1.3.6.1.4.1.4413.1.1.15.1.2.1.1 | RowagentPethMainPseEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.4413.1.1.15.1.2.1.1.1 | ColumnagentPethMainPseLegacy | read-write | current | Enable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected. |
| 1.3.6.1.4.1.4413.1.1.15.1.3 | TableagentPethPseTable | not-accessible | current | A table of per-unit information and configuration objects relating to the power configurtion for the entire pse unit. |
| 1.3.6.1.4.1.4413.1.1.15.1.3.1 | RowagentPethPseEntry | not-accessible | current | A collection of objects providing additional power information and control parameters for the specified pse unit. |
| 1.3.6.1.4.1.4413.1.1.15.1.3.1.1 | ColumnagentPethPsePowerManagementMode | read-write | current | Describes or controls the power management algorithm used by the pse to deliver power to the requesting PDsthat a pds. A value of dynamic(1) means that power c… |