MIB Viewer

FOUNDRY-CAR-MIB

49 objects
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Imported Objects
FOUNDRY-SN-SWITCH-GROUP-MIBsnSwitch
IF-MIBifIndex InterfaceIndex
SNMPv2-SMICounter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCMacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.1991.1.1.3.16IdentitysnCARCopyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specificatio…
1.3.6.1.4.1.1991.1.1.3.16.1NodesnPortCARs
1.3.6.1.4.1.1991.1.1.3.16.1.1TablesnPortCARTablenot-accessiblecurrentA table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets …
1.3.6.1.4.1.1991.1.1.3.16.1.1.1RowsnPortCAREntrynot-accessiblecurrentA collection of rate-limit configuration objects on this interface.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.1ColumnsnPortCARifIndexread-onlycurrentThe ifIndex value for this rate limit entry.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.2ColumnsnPortCARDirectionread-onlycurrent
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.3ColumnsnPortCARRowIndexread-onlycurrentThe table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.4ColumnsnPortCARTyperead-onlycurrentThe type of traffic rate-limited against.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.5ColumnsnPortCARAccIdxread-onlycurrentThe index to the access list if RateLimitType is either quickAcc or standardAcc.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.6ColumnsnPortCARRateread-onlycurrentThe comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in …
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.7ColumnsnPortCARLimitread-onlycurrentThis is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes th…
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.8ColumnsnPortCARExtLimitread-onlycurrentThis is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.9ColumnsnPortCARConformActionread-onlycurrentAction to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent r…
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.10ColumnsnPortCARExceedActionread-onlycurrentAction to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate…
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.11ColumnsnPortCARStatSwitchedPktsread-onlycurrentThe counter of packets permitted by this rate limit.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.12ColumnsnPortCARStatSwitchedBytesread-onlycurrentThe counter of bytes permitted by this interface.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.13ColumnsnPortCARStatFilteredPktsread-onlycurrentThe counter of packets which exceeded this rate limit.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.14ColumnsnPortCARStatFilteredBytesread-onlycurrentThe counter of bytes which exceeded this rate limit.
1.3.6.1.4.1.1991.1.1.3.16.1.1.1.15ColumnsnPortCARStatCurBurstread-onlycurrentThe current received burst size.
1.3.6.1.4.1.1991.1.1.3.16.1.2TableagRateLimitCounterTablenot-accessiblecurrentA table of rate limit counter entries.
1.3.6.1.4.1.1991.1.1.3.16.1.2.1RowagRateLimitCounterEntrynot-accessiblecurrentA collection of rate-limit counter objects on a interface, direction and configuration row index within that interface.
1.3.6.1.4.1.1991.1.1.3.16.1.2.1.1ColumnagRateLimitCounterFwdedOctetsread-onlycurrentThe forwarded octet count for this rate limit entry.
1.3.6.1.4.1.1991.1.1.3.16.1.2.1.2ColumnagRateLimitCounterDroppedOctetsread-onlycurrentThe dropped octet count for this rate limit entry.
1.3.6.1.4.1.1991.1.1.3.16.1.2.1.3ColumnagRateLimitCounterReMarkedOctetsread-onlycurrentThe remarked octet count for this rate limit entry.
1.3.6.1.4.1.1991.1.1.3.16.1.2.1.4ColumnagRateLimitCounterTotalOctetsread-onlycurrentThe total octet count for this rate limit entry.
1.3.6.1.4.1.1991.1.1.3.16.1.3TableagRateLimitCounterIndexTablenot-accessiblecurrentA table to map each rowindexes of rate limit counter entries to their corresponding ACL ID (or) VLAN ID (or) VLAN Group ID.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1RowagRateLimitCounterIndexEntrynot-accessiblecurrentA collection of rate-limit counter objects on a interface, direction and configuration row index within that interface.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.1ColumnagRateLimitCounterIndexRowIndexread-onlycurrentThe table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.2ColumnagRateLimitCounterIndexDirectionread-onlycurrent
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.3ColumnagRateLimitCounterIndexACLIDread-onlycurrentThe corresponding ACL ID to match with the row index of the ratelimit counter table.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.4ColumnagRateLimitCounterIndexVLANIDread-onlycurrentThe corresponding VLAN ID to match with the row index of the ratelimit counter table.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.5ColumnagRateLimitCounterIndexVLANGroupIDread-onlycurrentThe corresponding VLAN Group ID to match with the row index of the ratelimit counter table.
1.3.6.1.4.1.1991.1.1.3.16.1.3.1.6ColumnagRateLimitCounterIndexMACAddressread-onlycurrentThe corresponding MAC Address for Source MAC based rate limit to match with the row index of the ratelimit counter table.
1.3.6.1.4.1.1991.1.1.3.16.1.4TableagRateLimitBUMCounterTablenot-accessiblecurrentThis table displays The number of bytes dropped due to BUM rate-limit on the port, based on configured packet type and VLANID Committed Burst Size(CBS) in bits…
1.3.6.1.4.1.1991.1.1.3.16.1.4.1RowagRateLimitBUMCounterEntrynot-accessiblecurrentAn entry containing the number of bytes dropped due to BUM rate-limit, followed by CBS ,CIR, AlertLowLevelThreshold, AlertHighLevelThreshold in terms of bits, …
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.1ColumnagRateLimitBUMCounterIfindexnot-accessiblecurrentIfindex, a count which uniquely identifies the ports in the chassis. Ranges from 1 to 2048
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.2ColumnagRateLimitBUMCounterVLANIDnot-accessiblecurrentVLANID, a ID which is used to represent the corresponding VLAN in the chassis. Ranges from 1 to 4096
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.3ColumnagRateLimitBUMCounterPacketTypenot-accessiblecurrentPacketType, used to represent the type of the packet i.e. B(1) or U(2) or BU(3) or M(4) or BM(5) or UM(6) or BUM(7) U?Unknown-Unicast, B?Broadcast and M?Multic…
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.4ColumnagRateLimitBUMCounterDroppedOctetsread-onlycurrentA count used to represent the number of bytes dropped due to BUM rate-limit in bytes.
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.5ColumnagRateLimitBUMCounterCBSread-onlycurrentA count used to represent the Committed Burst Size in bits.
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.6ColumnagRateLimitBUMCounterCIRread-onlycurrentA count used to represent the Committed Information Rate in bits.
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.7ColumnagRateLimitBUMCounterAlertLowLevelThresholdread-onlycurrentA count used to represent the configured lower threshold level in bits, to generate the Alert.
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.8ColumnagRateLimitBUMCounterAlertHighLevelThresholdread-onlycurrentA count used to represent the configured Higher threshold level in bits, to generate the Alert.
1.3.6.1.4.1.1991.1.1.3.16.1.4.1.9ColumnagRateLimitBUMCounterShutdownTimeoutread-onlycurrentA count used to represent the Timeout value in terms of minutes, which is the time interval after which the shutdown port will be enabled.
1.3.6.1.4.1.1991.1.1.3.16.1.5NodesnBUMRLNotifications
1.3.6.1.4.1.1991.1.1.3.16.1.5.1NotificationsnTrapBUMratelimitAlertLowThresholdcurrentA snTrapBUMratelimitAlertLowThreshold trap signifies that the ingress packets interms of bits have reached the configured low level threshold.
1.3.6.1.4.1.1991.1.1.3.16.1.5.2NotificationsnTrapBUMratelimitAlertHighThresholdcurrentA snTrapBUMratelimitAlertHighThreshold trap signifies that the ingress packets interms of bits, have reached the configured high level threshold.
1.3.6.1.4.1.1991.1.1.3.16.1.5.3NotificationsnTrapBUMratelimitShutdownLinkDowncurrentA snTrapBUMratelimitShutdownLinkDown trap signifies that the port is shutdown after reaching the configured CIR in bps.
1.3.6.1.4.1.1991.1.1.3.16.1.5.4NotificationsnTrapBUMratelimitShutdownLinkUpcurrentA snTrapBUMratelimitAlertHighThreshold trap signifies that the port is UP after the specified shutdown timeout in minutes.