FOUNDRY-SN-SWITCH-GROUP-MIB
743 objects
Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| FOUNDRY-SN-AGENT-MIB | DisplayString MacAddress |
| FOUNDRY-SN-ROOT-MIB | switch |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3 | IdentitysnSwitch | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.1 | NodesnSwInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.1.1 | ScalarsnSwGroupOperMode | read-write | current | noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basi… |
| 1.3.6.1.4.1.1991.1.1.3.1.2 | ScalarsnSwGroupIpL3SwMode | read-write | current | The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3… |
| 1.3.6.1.4.1.1991.1.1.3.1.3 | ScalarsnSwGroupIpMcastMode | read-write | current | The Switch Group is configured with the IP Multicast (IGMP snooping) mode either enabled (active or passive) or disabled and the default is disabled mode. disa… |
| 1.3.6.1.4.1.1991.1.1.3.1.4 | ScalarsnSwGroupDefaultCfgMode | read-write | current | The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1).… |
| 1.3.6.1.4.1.1991.1.1.3.1.5 | ScalarsnSwGroupSwitchAgeTime | read-write | current | Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 … |
| 1.3.6.1.4.1.1991.1.1.3.1.6 | ScalarsnVLanGroupVlanCurEntry | read-only | current | The current total entry number of VLANs are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.7 | ScalarsnVLanGroupSetAllVLan | read-write | current | The value of this object is the VLanIndex of a particalur entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except… |
| 1.3.6.1.4.1.1991.1.1.3.1.8 | ScalarsnSwPortSetAll | read-write | current | The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMod… |
| 1.3.6.1.4.1.1991.1.1.3.1.9 | ScalarsnFdbTableCurEntry | read-only | current | The current total entry number of FDB are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.10 | ScalarsnFdbTableStationFlush | read-write | current | The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value … |
| 1.3.6.1.4.1.1991.1.1.3.1.11 | ScalarsnPortStpSetAll | read-write | current | The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of… |
| 1.3.6.1.4.1.1991.1.1.3.1.12 | ScalarsnSwProbePortNum | read-write | current | A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8… |
| 1.3.6.1.4.1.1991.1.1.3.1.13 | ScalarsnSw8021qTagMode | read-write | current | The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE… |
| 1.3.6.1.4.1.1991.1.1.3.1.14 | ScalarsnSwGlobalStpMode | read-write | current | Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spann… |
| 1.3.6.1.4.1.1991.1.1.3.1.15 | ScalarsnSwIpMcastQuerierMode | read-write | current | The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic loca… |
| 1.3.6.1.4.1.1991.1.1.3.1.17 | ScalarsnSwViolatorPortNumber | read-only | current | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. … |
| 1.3.6.1.4.1.1991.1.1.3.1.18 | ScalarsnSwViolatorMacAddress | read-only | current | The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.19 | ScalarsnVLanGroupVlanMaxEntry | read-write | current | The maximum number of VLAN entries are allowed to configure. |
| 1.3.6.1.4.1.1991.1.1.3.1.20 | ScalarsnSwEosBufferSize | read-only | current | A specific buffer size for all the different EOS buffers. |
| 1.3.6.1.4.1.1991.1.1.3.1.21 | ScalarsnVLanByPortEntrySize | read-only | current | The size of each VLAN table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.22 | ScalarsnSwPortEntrySize | read-only | current | The size of each port table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.23 | ScalarsnFdbStationEntrySize | read-only | current | The size of each Fdb station table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.24 | ScalarsnPortStpEntrySize | read-only | current | The size of each port stp table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.25 | ScalarsnSwEnableBridgeNewRootTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate bridge new root traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.26 | ScalarsnSwEnableBridgeTopoChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.27 | ScalarsnSwEnableLockedAddrViolationTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate locked address violation traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.28 | ScalarsnSwIpxL3SwMode | read-write | current | The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer… |
| 1.3.6.1.4.1.1991.1.1.3.1.29 | ScalarsnVLanByIpSubnetMaxSubnets | read-only | current | The maximum number of subnets for each IP VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.30 | ScalarsnVLanByIpxNetMaxNetworks | read-only | current | The maximum number of networks for each IPX VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.31 | ScalarsnSwProtocolVLanMode | read-write | deprecated | disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). |
| 1.3.6.1.4.1.1991.1.1.3.1.32 | ScalarsnMacStationVLanId | read-write | deprecated | This VLAN ID controls filtering of the Forwarding Database table in the standard Bridge MIB (dot1dTpFdbTable). Since the dot1dTpFdbTable contains MAC addresses… |
| 1.3.6.1.4.1.1991.1.1.3.1.33 | ScalarsnSwClearCounters | read-write | current | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP … |
| 1.3.6.1.4.1.1991.1.1.3.1.34 | ScalarsnSw8021qTagType | read-write | current | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.1.35 | ScalarsnSwBroadcastLimit | read-write | current | Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of … |
| 1.3.6.1.4.1.1991.1.1.3.1.36 | ScalarsnSwMaxMacFilterPerSystem | read-only | current | The maximum number of MAC Filters per system in the MAC Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.37 | ScalarsnSwMaxMacFilterPerPort | read-only | current | The maximum number of MAC Filters per port in the Port MAC Access Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.38 | ScalarsnSwDefaultVLanId | read-write | current | The VLAN ID of the DEFAULT PORT-VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.39 | ScalarsnSwGlobalAutoNegotiate | read-write | current | This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1)… |
| 1.3.6.1.4.1.1991.1.1.3.1.40 | ScalarsnSwQosMechanism | read-write | current | Indicates whether the qos mechanism is strict or weighted. |
| 1.3.6.1.4.1.1991.1.1.3.1.41 | ScalarsnSwSingleStpMode | read-write | current | Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spa… |
| 1.3.6.1.4.1.1991.1.1.3.1.42 | ScalarsnSwFastStpMode | read-write | current | Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Sp… |
| 1.3.6.1.4.1.1991.1.1.3.1.43 | ScalarsnSwViolatorIfIndex | read-only | current | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.44 | ScalarsnSwSingleStpVLanId | read-only | current | The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tree was disabled. |
| 1.3.6.1.4.1.1991.1.1.3.1.45 | ScalarsnSwJumboMode | read-write | current | The jumbo mode on the Switch can be set either enabled or disabled and the default is disabled mode. The jumbo frame (10200 bytes) can be supported if this mod… |
| 1.3.6.1.4.1.1991.1.1.3.1.46 | ScalarsnSwACLPerPortPerVlanMode | read-write | obsolete | The ACL Per port per VLAN mode on the Switch can be set either enabled or disabled and the default is disabled mode. Allow the access list on selective ports o… |
| 1.3.6.1.4.1.1991.1.1.3.1.47 | ScalarsnSwIpMcastVersion | read-write | current | Multicast version at the globle level can be set 2 or 3, and the default is 2 |
| 1.3.6.1.4.1.1991.1.1.3.1.48 | ScalarsnSwMgmtVlan | read-write | current | VLAN can be a part of the management VLAN. It dedicates this VLAN for management purpose. The value 0 means that the management VLAN is not configurated, or is… |
| 1.3.6.1.4.1.1991.1.1.3.2 | NodesnVLanInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.2.1 | TablesnVLanByPortTable | not-accessible | deprecated | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1 | RowsnVLanByPortEntry | not-accessible | deprecated | An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Globa… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.1 | ColumnsnVLanByPortVLanIndex | read-only | deprecated | The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.2 | ColumnsnVLanByPortVLanId | read-write | deprecated | The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.3 | ColumnsnVLanByPortPortMask | read-write | deprecated | The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.4 | ColumnsnVLanByPortQos | read-write | deprecated | The Stand alone stackable switch VLAN Priority values are: low(0) high(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.5 | ColumnsnVLanByPortStpMode | read-write | deprecated | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.6 | ColumnsnVLanByPortStpPriority | read-write | deprecated | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.7 | ColumnsnVLanByPortStpGroupMaxAge | read-write | deprecated | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.8 | ColumnsnVLanByPortStpGroupHelloTime | read-write | deprecated | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.9 | ColumnsnVLanByPortStpGroupForwardDelay | read-write | deprecated | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.10 | ColumnsnVLanByPortRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.11 | ColumnsnVLanByPortOperState | read-only | deprecated | By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. activated(1)......the VLAN entry is… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.12 | ColumnsnVLanByPortBaseNumPorts | read-only | deprecated | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.13 | ColumnsnVLanByPortBaseType | read-only | deprecated | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.14 | ColumnsnVLanByPortStpProtocolSpecification | read-only | deprecated | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.15 | ColumnsnVLanByPortStpMaxAge | read-only | deprecated | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.16 | ColumnsnVLanByPortStpHelloTime | read-only | deprecated | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.17 | ColumnsnVLanByPortStpHoldTime | read-only | deprecated | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.18 | ColumnsnVLanByPortStpForwardDelay | read-only | deprecated | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.19 | ColumnsnVLanByPortStpTimeSinceTopologyChange | read-only | deprecated | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.20 | ColumnsnVLanByPortStpTopChanges | read-only | deprecated | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.21 | ColumnsnVLanByPortStpRootCost | read-only | deprecated | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.22 | ColumnsnVLanByPortStpRootPort | read-only | deprecated | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.23 | ColumnsnVLanByPortStpDesignatedRoot | read-only | deprecated | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.24 | ColumnsnVLanByPortBaseBridgeAddress | read-only | deprecated | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.25 | ColumnsnVLanByPortVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.26 | ColumnsnVLanByPortRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.27 | ColumnsnVLanByPortChassisPortMask | read-write | deprecated | The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.28 | ColumnsnVLanByPortPortList | read-write | deprecated | A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the … |
| 1.3.6.1.4.1.1991.1.1.3.2.2 | TablesnVLanByProtocolTable | not-accessible | current | . |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1 | RowsnVLanByProtocolEntry | not-accessible | current | An entry in the VLAN By Protocol Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.1 | ColumnsnVLanByProtocolVLanId | read-only | current | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.2 | ColumnsnVLanByProtocolIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.3 | ColumnsnVLanByProtocolDynamic | read-write | current | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.4 | ColumnsnVLanByProtocolStaticMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.5 | ColumnsnVLanByProtocolExcludeMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.6 | ColumnsnVLanByProtocolRouterIntf | read-write | current | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.7 | ColumnsnVLanByProtocolRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.8 | ColumnsnVLanByProtocolDynamicMask | read-only | deprecated | The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.9 | ColumnsnVLanByProtocolChassisStaticMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.10 | ColumnsnVLanByProtocolChassisExcludeMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.11 | ColumnsnVLanByProtocolChassisDynamicMask | read-only | deprecated | The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.12 | ColumnsnVLanByProtocolVLanName | read-write | current | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.13 | ColumnsnVLanByProtocolStaticPortList | read-write | current | A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slo… |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.14 | ColumnsnVLanByProtocolExcludePortList | read-write | current | A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the … |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.15 | ColumnsnVLanByProtocolDynamicPortList | read-only | current | A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.1991.1.1.3.2.3 | TablesnVLanByIpSubnetTable | not-accessible | current | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1 | RowsnVLanByIpSubnetEntry | not-accessible | current | An entry in the VLAN By IP Subnet Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.1 | ColumnsnVLanByIpSubnetVLanId | read-only | current | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.2 | ColumnsnVLanByIpSubnetIpAddress | read-only | current | Subnet IP address. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.3 | ColumnsnVLanByIpSubnetSubnetMask | read-only | current | Subnet mask associated with the Subnet IP address. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.4 | ColumnsnVLanByIpSubnetDynamic | read-write | current | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.5 | ColumnsnVLanByIpSubnetStaticMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.6 | ColumnsnVLanByIpSubnetExcludeMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.7 | ColumnsnVLanByIpSubnetRouterIntf | read-write | current | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.8 | ColumnsnVLanByIpSubnetRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.9 | ColumnsnVLanByIpSubnetDynamicMask | read-only | deprecated | The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.10 | ColumnsnVLanByIpSubnetChassisStaticMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.11 | ColumnsnVLanByIpSubnetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.12 | ColumnsnVLanByIpSubnetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.13 | ColumnsnVLanByIpSubnetVLanName | read-write | current | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.14 | ColumnsnVLanByIpSubnetStaticPortList | read-write | current | A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the… |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.15 | ColumnsnVLanByIpSubnetExcludePortList | read-write | current | A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.16 | ColumnsnVLanByIpSubnetDynamicPortList | read-only | current | A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-b… |
| 1.3.6.1.4.1.1991.1.1.3.2.4 | TablesnVLanByIpxNetTable | not-accessible | current | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1 | RowsnVLanByIpxNetEntry | not-accessible | current | An entry in the VLAN By Ipx Network Number Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.1 | ColumnsnVLanByIpxNetVLanId | read-only | current | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.2 | ColumnsnVLanByIpxNetNetworkNum | read-only | current | IPX Network Number. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.3 | ColumnsnVLanByIpxNetFrameType | read-only | current | The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApp… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.4 | ColumnsnVLanByIpxNetDynamic | read-write | current | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.5 | ColumnsnVLanByIpxNetStaticMask | read-write | deprecated | The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.6 | ColumnsnVLanByIpxNetExcludeMask | read-write | deprecated | The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.7 | ColumnsnVLanByIpxNetRouterIntf | read-write | current | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.8 | ColumnsnVLanByIpxNetRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.9 | ColumnsnVLanByIpxNetDynamicMask | read-only | deprecated | The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.10 | ColumnsnVLanByIpxNetChassisStaticMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.11 | ColumnsnVLanByIpxNetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.12 | ColumnsnVLanByIpxNetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.13 | ColumnsnVLanByIpxNetVLanName | read-write | current | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.14 | ColumnsnVLanByIpxNetStaticPortList | read-write | current | A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is t… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.15 | ColumnsnVLanByIpxNetExcludePortList | read-write | current | A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.16 | ColumnsnVLanByIpxNetDynamicPortList | read-only | current | A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8… |
| 1.3.6.1.4.1.1991.1.1.3.2.5 | TablesnVLanByATCableTable | not-accessible | current | A Table Of VLAN By AppleTalk Network Number. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1 | RowsnVLanByATCableEntry | not-accessible | current | An entry of the AppleTalk Cable VLAN table. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.1 | ColumnsnVLanByATCableVLanId | read-only | current | The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.2 | ColumnsnVLanByATCableIndex | read-only | current | AppleTalk Cable VLAN index number. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.3 | ColumnsnVLanByATCableRouterIntf | read-write | current | A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interf… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.4 | ColumnsnVLanByATCableRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.5 | ColumnsnVLanByATCableChassisStaticMask | read-write | deprecated | A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortL… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.6 | ColumnsnVLanByATCableVLanName | read-write | current | VLAN Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.7 | ColumnsnVLanByATCableStaticPortList | read-write | current | A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.1991.1.1.3.2.6 | TablesnVLanByPortMemberTable | not-accessible | current | Port VLAN (Layer 2 VLAN) port membership table. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1 | RowsnVLanByPortMemberEntry | not-accessible | current | An entry of the port VLAN membership table. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.1 | ColumnsnVLanByPortMemberVLanId | read-only | current | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.2 | ColumnsnVLanByPortMemberPortId | read-only | current | The ifIndex which is a member of the port VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.3 | ColumnsnVLanByPortMemberRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.4 | ColumnsnVLanByPortMemberTagMode | read-write | current | Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-defau… |
| 1.3.6.1.4.1.1991.1.1.3.2.7 | TablesnVLanByPortCfgTable | not-accessible | current | Port VLAN (Layer 2 VLAN) configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1 | RowsnVLanByPortCfgEntry | not-accessible | current | An entry of the port VLAN configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.1 | ColumnsnVLanByPortCfgVLanId | read-only | current | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.2 | ColumnsnVLanByPortCfgQos | read-write | current | The Stand alone stackable switch VLAN Priority values are: level0(0) level1(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), le… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.3 | ColumnsnVLanByPortCfgStpMode | read-write | current | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.4 | ColumnsnVLanByPortCfgStpPriority | read-write | current | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.5 | ColumnsnVLanByPortCfgStpGroupMaxAge | read-write | current | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.6 | ColumnsnVLanByPortCfgStpGroupHelloTime | read-write | current | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.7 | ColumnsnVLanByPortCfgStpGroupForwardDelay | read-write | current | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.8 | ColumnsnVLanByPortCfgBaseNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.9 | ColumnsnVLanByPortCfgBaseType | read-only | current | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.10 | ColumnsnVLanByPortCfgStpProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.11 | ColumnsnVLanByPortCfgStpMaxAge | read-only | current | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.12 | ColumnsnVLanByPortCfgStpHelloTime | read-only | current | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.13 | ColumnsnVLanByPortCfgStpHoldTime | read-only | current | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.14 | ColumnsnVLanByPortCfgStpForwardDelay | read-only | current | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.15 | ColumnsnVLanByPortCfgStpTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.16 | ColumnsnVLanByPortCfgStpTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.17 | ColumnsnVLanByPortCfgStpRootCost | read-only | current | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.18 | ColumnsnVLanByPortCfgStpRootPort | read-only | current | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.19 | ColumnsnVLanByPortCfgStpDesignatedRoot | read-only | current | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.20 | ColumnsnVLanByPortCfgBaseBridgeAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.21 | ColumnsnVLanByPortCfgVLanName | read-write | current | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.22 | ColumnsnVLanByPortCfgRouterIntf | read-write | current | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.23 | ColumnsnVLanByPortCfgRowStatus | read-write | current | Use object to delete a vlan entry. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.24 | ColumnsnVLanByPortCfgStpVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.25 | ColumnsnVLanByPortCfgInOctets | read-only | deprecated | The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.26 | ColumnsnVLanByPortCfgMcastMode | read-write | current | Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabl… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.27 | ColumnsnVLanByPortCfgMcastVersion | read-write | current | Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0 |
| 1.3.6.1.4.1.1991.1.1.3.3 | NodesnSwPortInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.3.1 | TablesnSwPortInfoTable | not-accessible | deprecated | A specific snSwPortInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1 | RowsnSwPortInfoEntry | not-accessible | deprecated | An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequ… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.1 | ColumnsnSwPortInfoPortNum | read-only | deprecated | The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.2 | ColumnsnSwPortInfoMonitorMode | read-write | deprecated | DEPRECATED by snSwPortInfoMirrorMode and snPortMonitorTable. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.3 | ColumnsnSwPortInfoTagMode | read-write | deprecated | For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.4 | ColumnsnSwPortInfoChnMode | read-write | deprecated | The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.5 | ColumnsnSwPortInfoSpeed | read-write | deprecated | The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.6 | ColumnsnSwPortInfoMediaType | read-only | deprecated | The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits pe… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.7 | ColumnsnSwPortInfoConnectorType | read-only | deprecated | The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3).........… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.8 | ColumnsnSwPortInfoAdminStatus | read-write | deprecated | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.9 | ColumnsnSwPortInfoLinkStatus | read-only | deprecated | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.10 | ColumnsnSwPortInfoPortQos | read-write | deprecated | The Stand alone stackable switch Port Qos Priority values are: low(0) high(1) The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.11 | ColumnsnSwPortInfoPhysAddress | read-only | deprecated | The port physical address. The physical address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.12 | ColumnsnSwPortStatsInFrames | read-only | deprecated | The total number of packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.13 | ColumnsnSwPortStatsOutFrames | read-only | deprecated | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.14 | ColumnsnSwPortStatsAlignErrors | read-only | deprecated | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.15 | ColumnsnSwPortStatsFCSErrors | read-only | deprecated | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.16 | ColumnsnSwPortStatsMultiColliFrames | read-only | deprecated | dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one co… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.17 | ColumnsnSwPortStatsFrameTooLongs | read-only | deprecated | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.18 | ColumnsnSwPortStatsTxColliFrames | read-only | deprecated | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.19 | ColumnsnSwPortStatsRxColliFrames | read-only | deprecated | A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified … |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.20 | ColumnsnSwPortStatsFrameTooShorts | read-only | deprecated | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.21 | ColumnsnSwPortLockAddressCount | read-write | deprecated | The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.22 | ColumnsnSwPortStpPortEnable | read-write | deprecated | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.23 | ColumnsnSwPortDhcpGateListId | read-write | deprecated | The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.24 | ColumnsnSwPortName | read-write | deprecated | Port Name string. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.25 | ColumnsnSwPortStatsInBcastFrames | read-only | deprecated | The total number of broadcast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.26 | ColumnsnSwPortStatsOutBcastFrames | read-only | deprecated | The total number of broadcast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.27 | ColumnsnSwPortStatsInMcastFrames | read-only | deprecated | The total number of multicast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.28 | ColumnsnSwPortStatsOutMcastFrames | read-only | deprecated | The total number of multicast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.29 | ColumnsnSwPortStatsInDiscard | read-only | deprecated | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.30 | ColumnsnSwPortStatsOutDiscard | read-only | deprecated | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.31 | ColumnsnSwPortStatsMacStations | read-only | deprecated | The total number of MAC Stations connected to the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.32 | ColumnsnSwPortCacheGroupId | read-write | deprecated | Cache Group ID for the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.33 | ColumnsnSwPortTransGroupId | read-write | deprecated | Transparent Group ID for the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.34 | ColumnsnSwPortInfoAutoNegotiate | read-write | deprecated | This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.35 | ColumnsnSwPortInfoFlowControl | read-write | deprecated | Enable/Disbale port flow control. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.36 | ColumnsnSwPortInfoGigType | read-only | deprecated | The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per secon… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.37 | ColumnsnSwPortStatsLinkChange | read-only | deprecated | The total number of link state change of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.38 | ColumnsnSwPortIfIndex | read-only | deprecated | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.39 | ColumnsnSwPortDescr | read-only | deprecated | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.40 | ColumnsnSwPortInOctets | read-only | deprecated | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.41 | ColumnsnSwPortOutOctets | read-only | deprecated | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.42 | ColumnsnSwPortStatsInBitsPerSec | read-only | deprecated | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.43 | ColumnsnSwPortStatsOutBitsPerSec | read-only | deprecated | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.44 | ColumnsnSwPortStatsInPktsPerSec | read-only | deprecated | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.45 | ColumnsnSwPortStatsOutPktsPerSec | read-only | deprecated | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.46 | ColumnsnSwPortStatsInUtilization | read-only | deprecated | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.47 | ColumnsnSwPortStatsOutUtilization | read-only | deprecated | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.48 | ColumnsnSwPortFastSpanPortEnable | read-write | deprecated | The enabled/disabled fast span port status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.49 | ColumnsnSwPortFastSpanUplinkEnable | read-write | deprecated | The enabled/disabled fast span uplink status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.50 | ColumnsnSwPortVlanId | read-write | deprecated | The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an inval… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.51 | ColumnsnSwPortRouteOnly | read-write | deprecated | Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable r… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.52 | ColumnsnSwPortPresent | read-only | deprecated | Indicate if the port is absent or present. This object only valid for M4 module |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.53 | ColumnsnSwPortGBICStatus | read-only | deprecated | Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set t… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.54 | ColumnsnSwPortStatsInKiloBitsPerSec | read-only | deprecated | Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.55 | ColumnsnSwPortStatsOutKiloBitsPerSec | read-only | deprecated | Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.56 | ColumnsnSwPortLoadInterval | read-write | deprecated | The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.57 | ColumnsnSwPortTagType | read-write | deprecated | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.58 | ColumnsnSwPortInLinePowerControl | read-write | deprecated | Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.59 | ColumnsnSwPortInLinePowerWattage | read-write | deprecated | Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has … |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.60 | ColumnsnSwPortInLinePowerClass | read-write | deprecated | Adjust the inline power class. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port d… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.61 | ColumnsnSwPortInLinePowerPriority | read-write | deprecated | Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.62 | ColumnsnSwPortInfoMirrorMode | read-write | deprecated | Enable/disable mirror on this port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.63 | ColumnsnSwPortStatsInJumboFrames | read-only | deprecated | The total number of jumbo packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.64 | ColumnsnSwPortStatsOutJumboFrames | read-only | deprecated | The total number of jumbo packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.66 | ColumnsnSwPortInLinePowerConsumed | read-only | deprecated | Inline power consumed by the port. Each unit is milliwatts. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.67 | ColumnsnSwPortInLinePowerPDType | read-only | deprecated | Inline Power device type 802.3af or Legacy device. |
| 1.3.6.1.4.1.1991.1.1.3.3.2 | NodesnInterfaceId | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.1 | NodesnEthernetInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.2 | NodesnPosInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.3 | NodesnAtmInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.4 | NodesnVirtualInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.5 | NodesnLoopbackInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.6 | NodesnGreTunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.7 | NodesnSubInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.8 | NodesnMplsTunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.9 | NodesnPvcInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.10 | NodesnMgmtEthernetInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.11 | NodesnTrunkInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.12 | NodesnVirtualMgmtInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.13 | Nodesn6to4TunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.3 | TablesnInterfaceLookupTable | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1 | RowsnInterfaceLookupEntry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1.1 | ColumnsnInterfaceLookupInterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1.2 | ColumnsnInterfaceLookupIfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4 | TablesnIfIndexLookupTable | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1 | RowsnIfIndexLookupEntry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1.1 | ColumnsnIfIndexLookupIfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1.2 | ColumnsnIfIndexLookupInterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.5 | TablesnSwIfInfoTable | not-accessible | current | A specific snSwIfInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1 | RowsnSwIfInfoEntry | not-accessible | current | An entry in the snSwIfInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwIfInfoTable requires the entire sequence … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.1 | ColumnsnSwIfInfoPortNum | read-only | current | The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.2 | ColumnsnSwIfInfoMonitorMode | read-write | deprecated | DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.3 | ColumnsnSwIfInfoMirrorPorts | read-write | current | The list of port/interface index (ifindex), which mirror this interface, when monitoring is enabled. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.4 | ColumnsnSwIfInfoTagMode | read-write | current | Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-defau… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.5 | ColumnsnSwIfInfoTagType | read-write | current | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.6 | ColumnsnSwIfInfoChnMode | read-write | current | The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.7 | ColumnsnSwIfInfoSpeed | read-write | current | The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.8 | ColumnsnSwIfInfoMediaType | read-only | current | The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits pe… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.9 | ColumnsnSwIfInfoConnectorType | read-only | current | The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3).........… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.10 | ColumnsnSwIfInfoAdminStatus | read-write | current | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.11 | ColumnsnSwIfInfoLinkStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.12 | ColumnsnSwIfInfoPortQos | read-write | current | The Stand alone stackable switch Port Qos Priority values are: low(0) high(1) The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.13 | ColumnsnSwIfInfoPhysAddress | read-only | current | The port physical address. The physical address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.14 | ColumnsnSwIfLockAddressCount | read-write | current | The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.15 | ColumnsnSwIfStpPortEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.16 | ColumnsnSwIfDhcpGateListId | read-write | current | The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.17 | ColumnsnSwIfName | read-write | current | Port Name string. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.18 | ColumnsnSwIfDescr | read-only | current | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.19 | ColumnsnSwIfInfoAutoNegotiate | read-write | current | This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.20 | ColumnsnSwIfInfoFlowControl | read-write | current | Enable/Disbale port flow control. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.21 | ColumnsnSwIfInfoGigType | read-only | current | The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per secon… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.22 | ColumnsnSwIfFastSpanPortEnable | read-write | current | The enabled/disabled fast span port status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.23 | ColumnsnSwIfFastSpanUplinkEnable | read-write | current | The enabled/disabled fast span uplink status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.24 | ColumnsnSwIfVlanId | read-write | deprecated | This object return 0 due to no support for this object from FI 08.0.80 release. Write operation not-supported for this object. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.25 | ColumnsnSwIfRouteOnly | read-write | current | Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable r… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.26 | ColumnsnSwIfPresent | read-only | current | Indicate if the port is absent or present. This object only valid for M4 module. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.27 | ColumnsnSwIfGBICStatus | read-only | current | Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set t… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.28 | ColumnsnSwIfLoadInterval | read-write | current | The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.29 | ColumnsnSwIfStatsInFrames | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.30 | ColumnsnSwIfStatsOutFrames | read-only | current | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.31 | ColumnsnSwIfStatsAlignErrors | read-only | current | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.32 | ColumnsnSwIfStatsFCSErrors | read-only | current | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.33 | ColumnsnSwIfStatsMultiColliFrames | read-only | current | dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one co… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.34 | ColumnsnSwIfStatsTxColliFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.35 | ColumnsnSwIfStatsRxColliFrames | read-only | current | A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.36 | ColumnsnSwIfStatsFrameTooLongs | read-only | current | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.37 | ColumnsnSwIfStatsFrameTooShorts | read-only | current | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.38 | ColumnsnSwIfStatsInBcastFrames | read-only | current | The total number of broadcast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.39 | ColumnsnSwIfStatsOutBcastFrames | read-only | current | The total number of broadcast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.40 | ColumnsnSwIfStatsInMcastFrames | read-only | current | The total number of multicast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.41 | ColumnsnSwIfStatsOutMcastFrames | read-only | current | The total number of multicast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.42 | ColumnsnSwIfStatsInDiscard | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.43 | ColumnsnSwIfStatsOutDiscard | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.44 | ColumnsnSwIfStatsMacStations | read-only | current | The total number of MAC Stations connected to the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.45 | ColumnsnSwIfStatsLinkChange | read-only | current | The total number of link state change of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.46 | ColumnsnSwIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.47 | ColumnsnSwIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.48 | ColumnsnSwIfStatsInBitsPerSec | read-only | current | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.49 | ColumnsnSwIfStatsOutBitsPerSec | read-only | current | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.50 | ColumnsnSwIfStatsInPktsPerSec | read-only | current | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.51 | ColumnsnSwIfStatsOutPktsPerSec | read-only | current | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.52 | ColumnsnSwIfStatsInUtilization | read-only | current | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.53 | ColumnsnSwIfStatsOutUtilization | read-only | current | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.54 | ColumnsnSwIfStatsInKiloBitsPerSec | read-only | current | Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.55 | ColumnsnSwIfStatsOutKiloBitsPerSec | read-only | current | Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.56 | ColumnsnSwIfStatsInJumboFrames | read-only | current | The total number of jumbo packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.57 | ColumnsnSwIfStatsOutJumboFrames | read-only | current | The total number of jumbo packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.58 | ColumnsnSwIfInfoMirrorMode | read-write | current | Enable/disable mirror on this port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.59 | ColumnsnSwIfMacLearningDisable | read-write | current | The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.62 | ColumnsnSwIfInfoNativeMacAddress | read-only | current | The port native MAC address. The native MAC address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.63 | ColumnsnSwIfQosMonitorDropCounterMode | read-write | current | Enable/disable monitoring egress drop counter on this port. ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.64 | ColumnsnSwIfLRMAdapterPresent | read-only | current | To display the state for Long Reach Module (LRM) adapter is presented on this port. Some FastIron ICX devices support LRM optics on 10G fiber ports. LRM adapte… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.65 | ColumnsnSwIfStpBPDUGuardMode | read-write | current | The status of the spanning tree BPDU guard on an ethernet port. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.66 | ColumnsnSwIfStpRootGuardMode | read-write | current | The status of the spanning tree root guard on an ethernet port. Declare the port to be on root guard for all spanning trees. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.67 | ColumnsnSwIfRstpAdminEdgePortMode | read-write | current | The status of the rapid spanning tree admin edge port on an ethernet port. Declare the port to be an operational edge for all vlans. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.68 | ColumnsnSwIfInfoClockMode | read-write | current | The port can be configured to operate in either master or slave mode. The values are: none(0).........no configured or no support for clock mode, like fiber po… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.69 | ColumnsnSwIfProtectedMode | read-write | current | Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. The default is false … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.70 | ColumnsnSwIfTrustDscpMode | read-write | current | The status of Trust DSCP on an ethernet port. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.71 | ColumnsnSwIfVoiceVlanId | read-write | current | VLAN can be configurated as a voice over IP VLAN on an ethernet port. The valid range of voice VLAN ID is 1-4095. The value 0 means that the voice VLAN is not … |
| 1.3.6.1.4.1.1991.1.1.3.3.6 | TablesnIfOpticalMonitoringInfoTable | not-accessible | current | This table lists the instrumented parameters of all optical interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1 | RowsnIfOpticalMonitoringInfoEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.1 | ColumnsnIfOpticalMonitoringTemperature | read-only | current | This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xx… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.2 | ColumnsnIfOpticalMonitoringTxPower | read-only | current | This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.3 | ColumnsnIfOpticalMonitoringRxPower | read-only | current | This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low wa… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.4 | ColumnsnIfOpticalMonitoringTxBiasCurrent | read-only | current | Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. |
| 1.3.6.1.4.1.1991.1.1.3.3.7 | TablesnInterfaceLookup2Table | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1 | RowsnInterfaceLookup2Entry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1.1 | ColumnsnInterfaceLookup2InterfaceId | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1.2 | ColumnsnInterfaceLookup2IfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8 | TablesnIfIndexLookup2Table | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1 | RowsnIfIndexLookup2Entry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1.1 | ColumnsnIfIndexLookup2IfIndex | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1.2 | ColumnsnIfIndexLookup2InterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.9 | TablesnIfMediaInfoTable | not-accessible | current | This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated… |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1 | RowsnIfMediaInfoEntry | not-accessible | current | An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.1 | ColumnsnIfMediaType | read-only | current | The type of the media installed in the physical port. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.2 | ColumnsnIfMediaVendorName | read-only | current | The media vendor name, full name of the corporation. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.3 | ColumnsnIfMediaVersion | read-only | current | The media vendor product version number. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.4 | ColumnsnIfMediaPartNumber | read-only | current | The media vendor part number. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.5 | ColumnsnIfMediaSerialNumber | read-only | current | The vendor serial number of the media device. |
| 1.3.6.1.4.1.1991.1.1.3.3.10 | TablesnIfOpticalLaneMonitoringTable | not-accessible | current | This table lists the instrumented parameters of all lanes within a 100G optic of type LR4 and LR10. LR4 has 4 lanes per optic, LR10 has 10 lanes per optic. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1 | RowsnIfOpticalLaneMonitoringEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.1 | ColumnsnIfOpticalLaneMonitoringLane | not-accessible | current | The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.2 | ColumnsnIfOpticalLaneMonitoringTemperature | read-only | current | This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The … |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.3 | ColumnsnIfOpticalLaneMonitoringTxPower | read-only | current | This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value,… |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.4 | ColumnsnIfOpticalLaneMonitoringRxPower | read-only | current | This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or… |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.5 | ColumnsnIfOpticalLaneMonitoringTxBiasCurrent | read-only | current | Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.6 | ColumnsnIfOpticalLaneMonitoringVoltage | read-only | current | This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The form… |
| 1.3.6.1.4.1.1991.1.1.3.3.11 | TablebrcdIfEgressCounterInfoTable | not-accessible | current | This table lists the information of egress counters of all the queues in the physical ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1 | RowbrcdIfEgressCounterInfoEntry | not-accessible | current | An entry in the Interface Egress Counter Information table. The ifIndices of ethernet interfaces and the queue number will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.1 | ColumnbrcdIfEgressCounterIfIndex | not-accessible | current | The port number of egress counter in the physical port. The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.2 | ColumnbrcdIfEgressCounterQueueId | not-accessible | current | The queue number of egress counter in the given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.3 | ColumnbrcdIfEgressCounterType | read-only | current | The queue type of the egress counter in a given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.4 | ColumnbrcdIfEgressCounterPkts | read-only | current | The egress packet counters of the queue in a given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.5 | ColumnbrcdIfEgressCounterDropPkts | read-only | current | The egress dropped packet counters of the queue in a given port. ICX7150 platform has another set of queue drop counters which are displayed only when the port… |
| 1.3.6.1.4.1.1991.1.1.3.3.12 | TablesnSwIfInfoLimitTable | not-accessible | current | Rate limiting table for different types of traffic for a port. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1 | RowsnSwIfInfoLimitEntry | not-accessible | current | An entry in the snSwIfInfoLimit table indicates the configuration on a specified port for rate limiting values. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.1 | ColumnsnSwIfInfoLimitType | read-only | current | The type of the limit, the values specified in this row applies for, which takes on values broadcast, multicast, unknown-unicast. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.2 | ColumnsnSwIfInfoLimitPkts | read-only | current | Limit the number of packets to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.3 | ColumnsnSwIfInfoLimitBits | read-only | current | Limit the number of kilo bytes to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.4 | ColumnsnSwIfInfoLimitThreshold | read-only | current | The number of packets to be dropped when the rate limit is reached before taking the specified action like shutdown port. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.5 | ColumnsnSwIfInfoLimitShutdownTime | read-only | current | Specifies the time the port should be in down state and this takes effect only if Threshold is configured. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.6 | ColumnsnSwIfInfoLimitLog | read-only | current | Enable or disable the logging of the rate limit occurances. |
| 1.3.6.1.4.1.1991.1.1.3.4 | NodesnFdbInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.4.1 | TablesnFdbTable | not-accessible | current | This table contains snFdb information for each station known to the system, one entry per station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1 | RowsnFdbEntry | not-accessible | current | Each entry represents the information of a static MAC station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.1 | ColumnsnFdbStationIndex | read-only | current | The FDB Station index to the Fdb Station Table. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.2 | ColumnsnFdbStationAddr | read-write | current | The snFdbs physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.3 | ColumnsnFdbStationPort | read-write | current | Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.4 | ColumnsnFdbVLanId | read-write | current | The Station VLan ID. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.5 | ColumnsnFdbStationQos | read-write | current | The Stand alone stackable station Qos Priority values are: low(0) high(1) The BigIron switch station Priority values are: level0(0), level1(1), level2(2), leve… |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.6 | ColumnsnFdbStationType | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.7 | ColumnsnFdbRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.8 | ColumnsnFdbStationIf | read-write | current | Station interface index. |
| 1.3.6.1.4.1.1991.1.1.3.5 | NodesnPortStpInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.5.1 | TablesnPortStpTable | not-accessible | deprecated | A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is ena… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1 | RowsnPortStpEntry | not-accessible | deprecated | An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.1 | ColumnsnPortStpVLanId | read-only | deprecated | The VLAN ID of the VLAN switch community. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.2 | ColumnsnPortStpPortNum | read-only | deprecated | The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.3 | ColumnsnPortStpPortPriority | read-write | deprecated | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.4 | ColumnsnPortStpPathCost | read-write | deprecated | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.5 | ColumnsnPortStpOperState | read-only | deprecated | By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.6 | ColumnsnPortStpPortEnable | not-accessible | deprecated | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.7 | ColumnsnPortStpPortForwardTransitions | not-accessible | deprecated | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.8 | ColumnsnPortStpPortState | read-only | deprecated | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.9 | ColumnsnPortStpPortDesignatedCost | read-only | deprecated | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.10 | ColumnsnPortStpPortDesignatedRoot | read-only | deprecated | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.11 | ColumnsnPortStpPortDesignatedBridge | read-only | deprecated | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.12 | ColumnsnPortStpPortDesignatedPort | read-only | deprecated | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.13 | ColumnsnPortStpPortAdminRstp | read-write | deprecated | Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not wri… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.14 | ColumnsnPortStpPortProtocolMigration | read-write | deprecated | When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.15 | ColumnsnPortStpPortAdminEdgePort | read-write | deprecated | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.16 | ColumnsnPortStpPortAdminPointToPoint | read-write | deprecated | The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if i… |
| 1.3.6.1.4.1.1991.1.1.3.5.2 | TablesnIfStpTable | not-accessible | current | A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabl… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1 | RowsnIfStpEntry | not-accessible | current | An entry in the snIfStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snIfStpTable requires the entired sequence of the… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.1 | ColumnsnIfStpVLanId | read-only | current | The VLAN ID of the VLAN switch community. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.2 | ColumnsnIfStpPortNum | read-only | current | The port number of the Switch. It has the ifIndex value. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.3 | ColumnsnIfStpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.4 | ColumnsnIfStpCfgPathCost | read-write | current | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.5 | ColumnsnIfStpOperState | read-only | current | By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. activated(1)......the … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.8 | ColumnsnIfStpPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.9 | ColumnsnIfStpPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.10 | ColumnsnIfStpPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.11 | ColumnsnIfStpPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.12 | ColumnsnIfStpPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.13 | ColumnsnIfStpPortAdminRstp | read-write | current | Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not wri… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.14 | ColumnsnIfStpPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.15 | ColumnsnIfStpPortAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.16 | ColumnsnIfStpPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if i… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.17 | ColumnsnIfStpOperPathCost | read-only | current | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.18 | ColumnsnIfStpPortRole | read-only | current | STP/RSTP port role. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.19 | ColumnsnIfStpBPDUTransmitted | read-only | current | STP/RSTP bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.20 | ColumnsnIfStpBPDUReceived | read-only | current | STP/RSTP bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.21 | ColumnsnIfRstpConfigBPDUReceived | read-only | current | RSTP configuration bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.22 | ColumnsnIfRstpTCNBPDUReceived | read-only | current | RSTP topology change notification bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.23 | ColumnsnIfRstpConfigBPDUTransmitted | read-only | current | RSTP configuration bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.24 | ColumnsnIfRstpTCNBPDUTransmitted | read-only | current | RSTP topology change notification bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.6 | NodesnTrunkInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.6.1 | TablesnTrunkTable | not-accessible | current | A specific snTrunkTable consists of a number of Trunk port-mask. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1 | RowsnTrunkEntry | not-accessible | current | An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.1 | ColumnsnTrunkIndex | read-only | current | The number of the trunk entries can be configured. This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.2 | ColumnsnTrunkPortMask | read-write | current | Trunk membership of the Switch. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.3 | ColumnsnTrunkType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.2 | TablesnMSTrunkTable | not-accessible | current | A table contains the configuration of port members of multi-slot trunk groups. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1 | RowsnMSTrunkEntry | not-accessible | current | An entry of the snMSTrunkTable. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.1 | ColumnsnMSTrunkPortIndex | read-only | current | The primary port of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, … |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.2 | ColumnsnMSTrunkPortList | read-write | current | A list of port indices which are the port membership of a trunk group. Each port index is a 16-bit integer in big endian order. The first port index must be th… |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.3 | ColumnsnMSTrunkType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.4 | ColumnsnMSTrunkRowStatus | read-write | current | To create or delete a table entry. |
| 1.3.6.1.4.1.1991.1.1.3.6.3 | TablesnMSTrunkIfTable | not-accessible | current | A table contains the configuration of port members of multi-slot trunk groups. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1 | RowsnMSTrunkIfEntry | not-accessible | current | An entry of the snMSTrunkIfTable. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.1 | ColumnsnMSTrunkIfIndex | read-only | current | The primary port(IfIndex) of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5… |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.2 | ColumnsnMSTrunkIfList | read-write | current | A list of interface indices which are the port membership of a trunk group. Each interface index is a 16-bit integer in big endian order. The first interface/p… |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.3 | ColumnsnMSTrunkIfType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.4 | ColumnsnMSTrunkIfRowStatus | read-write | current | To create or delete a table entry. |
| 1.3.6.1.4.1.1991.1.1.3.7 | NodesnSwSummary | |||
| 1.3.6.1.4.1.1991.1.1.3.7.1 | ScalarsnSwSummaryMode | read-write | current | The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configur… |
| 1.3.6.1.4.1.1991.1.1.3.8 | NodesnDhcpGatewayListInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.8.1 | TablesnDhcpGatewayListTable | not-accessible | current | A table of DHCP gateway list of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1 | RowsnDhcpGatewayListEntry | not-accessible | current | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.1 | ColumnsnDhcpGatewayListId | read-only | current | The ID for a DHCP gateway list entry. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.2 | ColumnsnDhcpGatewayListAddrList | read-write | current | The DHCP gateway address list for each DHCP gateway list ID. This list contains 1 to 8 IP addresses represented by octet string. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.3 | ColumnsnDhcpGatewayListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.9 | NodesnDnsInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.9.1 | ScalarsnDnsDomainName | read-write | current | DNS Domain Name string. |
| 1.3.6.1.4.1.1991.1.1.3.9.2 | ScalarsnDnsGatewayIpAddrList | read-write | current | The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. |
| 1.3.6.1.4.1.1991.1.1.3.10 | NodesnMacFilter | |||
| 1.3.6.1.4.1.1991.1.1.3.10.1 | TablesnMacFilterTable | not-accessible | current | MAC filter table. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1 | RowsnMacFilterEntry | not-accessible | current | An entry in the MAC filter table. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.1 | ColumnsnMacFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.2 | ColumnsnMacFilterAction | read-write | current | Action to take if the Mac packet match with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.3 | ColumnsnMacFilterSourceMac | read-write | current | Source MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.4 | ColumnsnMacFilterSourceMask | read-write | current | Source MAC subnet mask. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.5 | ColumnsnMacFilterDestMac | read-write | current | Destination MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.6 | ColumnsnMacFilterDestMask | read-write | current | Destination MAC subnet mask. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.7 | ColumnsnMacFilterOperator | read-write | current | Type of comparison to perform. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.8 | ColumnsnMacFilterFrameType | read-write | current | Frame Type: ethernet-type, LLC and SNAP types |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.9 | ColumnsnMacFilterFrameTypeNum | read-write | current | Frame Type Number. 0 means NA |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.10 | ColumnsnMacFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.10.2 | TablesnMacFilterPortAccessTable | not-accessible | deprecated | MAC Filter port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1 | RowsnMacFilterPortAccessEntry | not-accessible | deprecated | An entry in the MAC Filter Port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.1 | ColumnsnMacFilterPortAccessPortIndex | read-only | deprecated | The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port… |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.2 | ColumnsnMacFilterPortAccessFilters | read-write | deprecated | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.3 | ColumnsnMacFilterPortAccessRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.10.3 | TablesnMacFilterIfAccessTable | not-accessible | current | MAC Filter port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1 | RowsnMacFilterIfAccessEntry | not-accessible | current | An entry in the MAC Filter Port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.1 | ColumnsnMacFilterIfAccessPortIndex | read-only | current | The port/interface index. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.2 | ColumnsnMacFilterIfAccessFilters | read-write | current | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.3 | ColumnsnMacFilterIfAccessRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.11 | NodesnNTP | |||
| 1.3.6.1.4.1.1991.1.1.3.11.1 | NodesnNTPGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.11.1.1 | ScalarsnNTPPollInterval | read-write | current | Interval specifies how often to poll the NTP server. Each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.11.1.2 | ScalarsnNTPTimeZone | read-write | current | Time zone. |
| 1.3.6.1.4.1.1991.1.1.3.11.1.3 | ScalarsnNTPSummerTimeEnable | read-write | current | Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sun… |
| 1.3.6.1.4.1.1991.1.1.3.11.1.4 | ScalarsnNTPSystemClock | read-write | current | System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] oct… |
| 1.3.6.1.4.1.1991.1.1.3.11.1.5 | ScalarsnNTPSync | read-write | current | Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'. |
| 1.3.6.1.4.1.1991.1.1.3.11.2 | TablesnNTPServerTable | not-accessible | current | NTP (Network Time Protocol) server table. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1 | RowsnNTPServerEntry | not-accessible | current | An entry in the NTP server table. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.1 | ColumnsnNTPServerIp | read-only | current | NTP server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.2 | ColumnsnNTPServerVersion | read-write | current | NTP server version. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.3 | ColumnsnNTPServerRowStatus | read-write | current | To create or delete a NTP server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.12 | NodesnRadius | |||
| 1.3.6.1.4.1.1991.1.1.3.12.1 | NodesnRadiusGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.12.1.1 | ScalarsnRadiusSNMPAccess | read-only | current | Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.2 | ScalarsnRadiusEnableTelnetAuth | read-write | current | Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.3 | ScalarsnRadiusRetransmit | read-write | current | The number of authentication query retransmissions to the Radius server. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.4 | ScalarsnRadiusTimeOut | read-write | current | Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.5 | ScalarsnRadiusDeadTime | read-write | current | Interval specifies Radius server dead time, each unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.6 | ScalarsnRadiusKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.7 | ScalarsnRadiusLoginMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: en… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.8 | ScalarsnRadiusEnableMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octe… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.9 | ScalarsnRadiusWebServerMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeratio… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.10 | ScalarsnRadiusSNMPServerMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the snmp-server. Each octet has the following enumerati… |
| 1.3.6.1.4.1.1991.1.1.3.12.2 | TablesnRadiusServerTable | not-accessible | current | Radius server table. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1 | RowsnRadiusServerEntry | not-accessible | current | An entry in the Radius server table. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.1 | ColumnsnRadiusServerIp | read-only | current | Radius server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.2 | ColumnsnRadiusServerAuthPort | read-write | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.3 | ColumnsnRadiusServerAcctPort | read-write | current | Account UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.4 | ColumnsnRadiusServerRowStatus | read-write | current | To create or delete a Radius server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.5 | ColumnsnRadiusServerRowKey | read-write | current | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.6 | ColumnsnRadiusServerUsage | read-write | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.3.13 | NodesnTacacs | |||
| 1.3.6.1.4.1.1991.1.1.3.13.1 | NodesnTacacsGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.13.1.1 | ScalarsnTacacsRetransmit | read-write | current | The number of authentication query retransmissions to the Tacacs server. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.2 | ScalarsnTacacsTimeOut | read-write | current | Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.3 | ScalarsnTacacsDeadTime | read-write | current | Interval specifies Tacacs server dead time, each unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.4 | ScalarsnTacacsKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.5 | ScalarsnTacacsSNMPAccess | read-only | current | Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'. |
| 1.3.6.1.4.1.1991.1.1.3.13.2 | TablesnTacacsServerTable | not-accessible | current | Tacacs server table. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1 | RowsnTacacsServerEntry | not-accessible | current | An entry in the Tacacs server table. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.1 | ColumnsnTacacsServerIp | read-only | current | Tacacs server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.2 | ColumnsnTacacsServerAuthPort | read-write | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.3 | ColumnsnTacacsServerRowStatus | read-write | current | To create or delete a Tacacs server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.4 | ColumnsnTacacsServerRowKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.5 | ColumnsnTacacsServerUsage | read-write | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.3.14 | NodesnQos | |||
| 1.3.6.1.4.1.1991.1.1.3.14.1 | TablesnQosProfileTable | not-accessible | current | A table contains the configuration of qos profile groups. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1 | RowsnQosProfileEntry | not-accessible | current | An entry of the snQosProfileTable. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.1 | ColumnsnQosProfileIndex | read-only | current | The table index of QOS Profile. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.2 | ColumnsnQosProfileName | read-write | current | Qos Profile Name string. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.3 | ColumnsnQosProfileRequestedBandwidth | read-write | current | Qos Profile Requested Bandwidth. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.4 | ColumnsnQosProfileCalculatedBandwidth | read-only | current | Qos Profile Calculated Bandwidth. |
| 1.3.6.1.4.1.1991.1.1.3.14.2 | TablesnQosBindTable | not-accessible | current | A table contains the configuration of 802.1p to qos profile binding groups. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1 | RowsnQosBindEntry | not-accessible | current | An entry of the snQosBindTable. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.1 | ColumnsnQosBindIndex | read-only | current | The table index of QOS Bind. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.2 | ColumnsnQosBindPriority | read-only | current | QOS bind priority. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.3 | ColumnsnQosBindProfileIndex | read-write | current | QOS Bind Profile Index. This is pointer to the index of snQosProfile Table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3 | NodesnDosAttack | |||
| 1.3.6.1.4.1.1991.1.1.3.14.3.1 | NodesnDosAttackGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.1 | ScalarsnDosAttackICMPDropCount | read-only | current | ICMP drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.2 | ScalarsnDosAttackICMPBlockCount | read-only | current | ICMP block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.3 | ScalarsnDosAttackSYNDropCount | read-only | current | SYN drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.4 | ScalarsnDosAttackSYNBlockCount | read-only | current | SYN block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2 | TablesnDosAttackPortTable | not-accessible | current | Denial of service attack port table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1 | RowsnDosAttackPortEntry | not-accessible | current | An entry of the denial of service attack port table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.1 | ColumnsnDosAttackPort | read-only | current | ifIndex value of a port. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2 | ColumnsnDosAttackPortICMPDropCount | read-only | current | ICMP drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3 | ColumnsnDosAttackPortICMPBlockCount | read-only | current | ICMP block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4 | ColumnsnDosAttackPortSYNDropCount | read-only | current | SYN drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5 | ColumnsnDosAttackPortSYNBlockCount | read-only | current | SYN block counter. |
| 1.3.6.1.4.1.1991.1.1.3.15 | NodesnAAA | |||
| 1.3.6.1.4.1.1991.1.1.3.15.1 | NodesnAuthentication | |||
| 1.3.6.1.4.1.1991.1.1.3.15.1.1 | ScalarsnAuthenticationDot1x | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authenticat… |
| 1.3.6.1.4.1.1991.1.1.3.15.1.2 | ScalarsnAuthenticationEnable | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.3 | ScalarsnAuthenticationLogin | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.4 | ScalarsnAuthenticationSnmpserver | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.5 | ScalarsnAuthenticationWebserver | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.2 | NodesnAuthorization | |||
| 1.3.6.1.4.1.1991.1.1.3.15.2.1 | ScalarsnAuthorizationCommandMethods | read-write | current | A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.2 | ScalarsnAuthorizationCommandLevel | read-write | current | Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Priv… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.3 | ScalarsnAuthorizationExec | read-write | current | A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value:… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.4 | ScalarsnAuthorizationCoaEnable | read-write | current | For change of Authorization (COA) enable. Possible enumeration values: 1 - Enable COA 0 - No Enable COA. |
| 1.3.6.1.4.1.1991.1.1.3.15.2.5 | ScalarsnAuthorizationCoaIgnore | read-write | current | For change of Authorization (COA) ignore COA commands. Possible enumeration values: dm-request(1) - Disconnect message request modify-acl(2) - Modify access co… |
| 1.3.6.1.4.1.1991.1.1.3.15.3 | NodesnAccounting | |||
| 1.3.6.1.4.1.1991.1.1.3.15.3.1 | ScalarsnAccountingCommandMethods | read-write | current | A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - s… |
| 1.3.6.1.4.1.1991.1.1.3.15.3.2 | ScalarsnAccountingCommandLevel | read-write | current | Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 -… |
| 1.3.6.1.4.1.1991.1.1.3.15.3.3 | ScalarsnAccountingExec | read-write | current | A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) … |
| 1.3.6.1.4.1.1991.1.1.3.15.3.4 | ScalarsnAccountingSystem | read-write | current | A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radi… |
| 1.3.6.1.4.1.1991.1.1.3.16 | NodesnCAR | |||
| 1.3.6.1.4.1.1991.1.1.3.17 | NodesnVLanCAR | |||
| 1.3.6.1.4.1.1991.1.1.3.18 | NodesnNetFlow | |||
| 1.3.6.1.4.1.1991.1.1.3.18.1 | NodesnNetFlowGlb | |||
| 1.3.6.1.4.1.1991.1.1.3.18.1.1 | ScalarsnNetFlowGblEnable | read-write | current | Enable/disable NetFlow export operation. |
| 1.3.6.1.4.1.1991.1.1.3.18.1.2 | ScalarsnNetFlowGblVersion | read-write | current | NetFlow export version. |
| 1.3.6.1.4.1.1991.1.1.3.18.1.3 | ScalarsnNetFlowGblProtocolDisable | read-write | current | bit 0 - other, disable all protocols export except UDP and TCP bit 1 - tcp, disable TCP protocol export bit 2 - udp, disable UDP protocol export |
| 1.3.6.1.4.1.1991.1.1.3.18.1.4 | ScalarsnNetFlowGblActiveTimeout | read-write | current | Maximum time an active flow can be in the NetFlow cache (minutes: 1..60) |
| 1.3.6.1.4.1.1991.1.1.3.18.1.5 | ScalarsnNetFlowGblInactiveTimeout | read-write | current | Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600) |
| 1.3.6.1.4.1.1991.1.1.3.18.2 | TablesnNetFlowCollectorTable | not-accessible | current | A table of each NetFlow collector information. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1 | RowsnNetFlowCollectorEntry | not-accessible | current | A row in the NetFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.1 | ColumnsnNetFlowCollectorIndex | read-only | current | The index to the NetFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.2 | ColumnsnNetFlowCollectorIp | read-write | current | The NetFlow collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.3 | ColumnsnNetFlowCollectorUdpPort | read-write | current | The NetFlow collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.4 | ColumnsnNetFlowCollectorSourceInterface | read-write | current | The ifIndex value to specify source port to export NetFlow packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.5 | ColumnsnNetFlowCollectorRowStatus | read-write | current | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.1991.1.1.3.18.3 | TablesnNetFlowAggregationTable | not-accessible | current | A table of each NetFlow aggregation scheme information. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1 | RowsnNetFlowAggregationEntry | not-accessible | current | A row in the NetFlow Aggregation table. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.1 | ColumnsnNetFlowAggregationIndex | read-only | current | The Aggregation scheme ID |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.2 | ColumnsnNetFlowAggregationIp | read-write | current | The NetFlow aggregation collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.3 | ColumnsnNetFlowAggregationUdpPort | read-write | current | The NetFlow aggregation collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.4 | ColumnsnNetFlowAggregationSourceInterface | read-write | current | The ifIndex value to specify source port to export NetFlow aggregation packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.5 | ColumnsnNetFlowAggregationNumberOfCacheEntries | read-write | current | Number of cache entries for aggregation scheme |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.6 | ColumnsnNetFlowAggregationActiveTimeout | read-write | current | Maximum time an active flow can be in the aggregation cache |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.7 | ColumnsnNetFlowAggregationInactiveTimeout | read-write | current | Maximum time an inactive flow can be in the aggregation cache |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.8 | ColumnsnNetFlowAggregationEnable | read-write | current | Enable/disable NetFlow aggregation for this aggregation scheme. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.9 | ColumnsnNetFlowAggregationRowStatus | read-write | current | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.1991.1.1.3.18.4 | TablesnNetFlowIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1 | RowsnNetFlowIfEntry | not-accessible | current | Entry containing the type of switching performed on that interface. |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1.1 | ColumnsnNetFlowIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1.2 | ColumnsnNetFlowIfFlowSwitching | read-write | current | To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching |
| 1.3.6.1.4.1.1991.1.1.3.19 | NodesnSFlow | |||
| 1.3.6.1.4.1.1991.1.1.3.19.1 | NodesnSFlowGlb | |||
| 1.3.6.1.4.1.1991.1.1.3.19.1.1 | ScalarsnSflowStatus | read-only | current | To enable/disable sflow sampling on all the interfaces. disabled - sflow sampling disabled enableed - sflow sampling enabled Unless globally enabled, it can't … |
| 1.3.6.1.4.1.1991.1.1.3.19.1.2 | ScalarsnSflowSampleRate | read-only | current | To set the rate wt which the packet sampling to happen. A value of 512 means, every 512th packet is simpleed for flow collection. |
| 1.3.6.1.4.1.1991.1.1.3.19.1.3 | ScalarsnSflowSourcePort | read-only | current | To set the UDP source port for sending the sflow samples to the configured collectors. Any permissible value can be configured for this and default is 8888. |
| 1.3.6.1.4.1.1991.1.1.3.19.1.4 | ScalarsnSflowAgentAddrType | read-only | current | To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determi… |
| 1.3.6.1.4.1.1991.1.1.3.19.1.5 | ScalarsnSflowAgentAddr | read-only | current | To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determi… |
| 1.3.6.1.4.1.1991.1.1.3.19.2 | TablesnSflowCollectorTable | not-accessible | current | Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one … |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1 | RowsnSflowCollectorEntry | not-accessible | current | A row in the sFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.1 | ColumnsnSflowCollectorIndex | read-only | current | The index to the sFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.2 | ColumnsnSflowCollectorIP | read-write | current | The sFlow collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.3 | ColumnsnSflowCollectorUDPPort | read-write | current | The sFlow collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.4 | ColumnsnSflowCollectorRowStatus | read-write | current | To create, update or delete a SFlow collector table entry. If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away… |
| 1.3.6.1.4.1.1991.1.1.3.20 | NodesnFDP | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1 | NodesnFdpMIBObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.1 | NodesnFdpInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1 | TablesnFdpInterfaceTable | not-accessible | current | Status of FDP on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1 | RowsnFdpInterfaceEntry | not-accessible | current | An entry in the snFdpInterfaceTable, having the status of FDP on an interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1 | ColumnsnFdpInterfaceIfIndex | not-accessible | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2 | ColumnsnFdpInterfaceFdpEnable | read-write | current | The flag, whether the Ruckus Wireless Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3 | ColumnsnFdpInterfaceCdpEnable | read-write | current | The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2 | NodesnFdpCache | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1 | TablesnFdpCacheTable | not-accessible | current | The table for the cached information obtained via receiving FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1 | RowsnFdpCacheEntry | not-accessible | current | An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is r… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.1 | ColumnsnFdpCacheIfIndex | not-accessible | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.2 | ColumnsnFdpCacheDeviceIndex | not-accessible | current | Identification of a device, which sent FDP/CDP messages |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.3 | ColumnsnFdpCacheDeviceId | read-only | current | The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent … |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.4 | ColumnsnFdpCacheAddressType | read-only | current | An indication of the type of address contained in the corresponding instance of snFdpCacheAddress. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.5 | ColumnsnFdpCacheAddress | read-only | current | The (first) network-layer address of the device as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.6 | ColumnsnFdpCacheVersion | read-only | current | Version string as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.7 | ColumnsnFdpCacheDevicePort | read-only | current | The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length str… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.8 | ColumnsnFdpCachePlatform | read-only | current | The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in th… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.9 | ColumnsnFdpCacheCapabilities | read-only | current | The Device's Functional Capabilities as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.10 | ColumnsnFdpCacheVendorId | read-only | current | Indicates the entry received by either FDP or CDP. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.11 | ColumnsnFdpCacheIsAggregateVlan | read-only | current | Neighbor device is in aggregated-vlan. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.12 | ColumnsnFdpCacheTagType | read-only | current | Neighbor device tag-type. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.13 | ColumnsnFdpCachePortVlanMask | read-only | current | Neighbor device port VLAN masks in 512-byte octet string. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14 | ColumnsnFdpCachePortTagMode | read-only | current | Neighbor device port tag mode. Dual(3) mode not supported from FI 08.0.80 release. This object will return 0 for dual(3) Mode. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15 | ColumnsnFdpCacheDefaultTrafficeVlanIdForDualMode | read-only | deprecated | This object return 0 due to no support for this object from FI 08.0.80 release. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3 | NodesnFdpGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.1 | ScalarsnFdpGlobalRun | read-write | current | The flag, whether the Ruckus Wireless Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.2 | ScalarsnFdpGlobalMessageInterval | read-write | current | The interval at which FDP messages are to be generated. The default value is 60 seconds. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.3 | ScalarsnFdpGlobalHoldTime | read-write | current | The time for the receiving device holds FDP message. The default value is 180 seconds. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.4 | ScalarsnFdpGlobalCdpRun | read-write | current | An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4 | NodesnFdpCachedAddr | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1 | TablesnFdpCachedAddressTable | not-accessible | current | Cached address table from receiving FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1 | RowsnFdpCachedAddressEntry | not-accessible | current | An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.1 | ColumnsnFdpCachedAddrIfIndex | not-accessible | current | The ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.2 | ColumnsnFdpCachedAddrDeviceIndex | not-accessible | current | A unique vlaue for each device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.3 | ColumnsnFdpCachedAddrDeviceAddrEntryIndex | not-accessible | current | A unique vlaue for address entry in device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.4 | ColumnsnFdpCachedAddrType | read-only | current | An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.5 | ColumnsnFdpCachedAddrValue | read-only | current | The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX addr… |
| 1.3.6.1.4.1.1991.1.1.3.21 | NodesnVsrp | |||
| 1.3.6.1.4.1.1991.1.1.3.22 | NodesnArpInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.23 | NodesnWireless | |||
| 1.3.6.1.4.1.1991.1.1.3.24 | NodesnMac | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1 | NodesnMacSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.1 | NodesnPortMacSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1 | TablesnPortMacSecurityTable | not-accessible | current | Status of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1 | RowsnPortMacSecurityEntry | not-accessible | current | An entry in the snPortMacSecurityTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1 | ColumnsnPortMacSecurityIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.2 | ColumnsnPortMacSecurityResource | read-only | current | The MAC address was secured using local or shared resources. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3 | ColumnsnPortMacSecurityQueryIndex | read-only | current | Entry index within the given resource of local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.4 | ColumnsnPortMacSecurityMAC | read-only | current | The secure MAC address for this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.5 | ColumnsnPortMacSecurityAgeLeft | read-only | current | The number of minutes the MAC address will remain secure before being aged out. 0 means no aging. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.6 | ColumnsnPortMacSecurityShutdownStatus | read-only | current | Interface up/down status. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.7 | ColumnsnPortMacSecurityShutdownTimeLeft | read-only | current | If snPortMacSecurityShutdownStatus is up(1), this value will be 0. If snPortMacSecurityShutdownStatus is down(2), this gives the number of seconds before this … |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.8 | ColumnsnPortMacSecurityVlanId | read-only | current | The vlan membership of this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2 | TablesnPortMacSecurityModuleStatTable | not-accessible | current | Port MAC security statistics on each module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1 | RowsnPortMacSecurityModuleStatEntry | not-accessible | current | An entry in the snPortMacSecurityModuleStatTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.1 | ColumnsnPortMacSecurityModuleStatSlotNum | read-only | current | The slot number of the port security device module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.2 | ColumnsnPortMacSecurityModuleStatTotalSecurityPorts | read-only | current | The totol number of Ethernet interfaces on which MAC security is configured in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.3 | ColumnsnPortMacSecurityModuleStatTotalMACs | read-only | current | The totol number of port MAC security MAC addresses are learned or configured in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.4 | ColumnsnPortMacSecurityModuleStatViolationCounts | read-only | current | The totol number of counts of violation are collected in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.5 | ColumnsnPortMacSecurityModuleStatTotalShutdownPorts | read-only | current | The totol number of Ethernet interfaces are shutted down due to security violation in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3 | TablesnPortMacSecurityIntfContentTable | not-accessible | current | Port MAC security statistics on each Ethernet Interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1 | RowsnPortMacSecurityIntfContentEntry | not-accessible | current | An entry in the snPortMacSecurityIntfContentTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.1 | ColumnsnPortMacSecurityIntfContentIfIndex | not-accessible | current | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2863. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.2 | ColumnsnPortMacSecurityIntfContentSecurity | read-write | current | Port security for this interface can be either disabled or enabled. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3 | ColumnsnPortMacSecurityIntfContentViolationType | read-write | current | Port security violation type for this interface is shutdown or restrict. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4 | ColumnsnPortMacSecurityIntfContentShutdownTime | read-write | current | If snPortMacSecurityIntfContentViolationType is shutdown(1), this value gives the number of seconds this interface is shut down when violation occurs. In the s… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5 | ColumnsnPortMacSecurityIntfContentShutdownTimeLeft | read-only | current | If snPortMacSecurityIntfContentViolationType is shutdown(1), whether this interface has been shut down due to a security violation and the value gives the numb… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.6 | ColumnsnPortMacSecurityIntfContentAgeOutTime | read-write | current | The amount of time, in minutes, MAC addresses learned on this interface will remain secure. It allows configurable values 0-1440. 0 means no aging permanently. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.7 | ColumnsnPortMacSecurityIntfContentMaxLockedMacAllowed | read-write | current | Maximum number of security MAC addresses can be locked to this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.8 | ColumnsnPortMacSecurityIntfContentTotalMACs | read-only | current | The totol number of port MAC security MAC addresses are locked in this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.9 | ColumnsnPortMacSecurityIntfContentViolationCounts | read-only | current | The totol number of counts of violation are collected in this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4 | TablesnPortMacSecurityIntfMacTable | not-accessible | current | Status of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1 | RowsnPortMacSecurityIntfMacEntry | not-accessible | current | An entry in the snPortMacSecurityIntfMacTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1 | ColumnsnPortMacSecurityIntfMacIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2 | ColumnsnPortMacSecurityIntfMacAddress | read-only | current | The secure MAC address for this local Ethernet interface on which the secure MAC Address is configured and/or learned. The maximum number of the secure MAC Add… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.3 | ColumnsnPortMacSecurityIntfMacVlanId | read-write | current | The vlan membership of this interface, zero means don't care. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.4 | ColumnsnPortMacSecurityIntfMacRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5 | TablesnPortMacSecurityAutosaveMacTable | not-accessible | current | Autosave MAC addresses of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1 | RowsnPortMacSecurityAutosaveMacEntry | not-accessible | current | An entry in the snPortMacSecurityAutosaveMacTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1 | ColumnsnPortMacSecurityAutosaveMacIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.2 | ColumnsnPortMacSecurityAutosaveMacResource | read-only | current | The MAC address was autosaved using local or shared resources. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3 | ColumnsnPortMacSecurityAutosaveMacQueryIndex | read-only | current | Entry index within the given resource of local Ethernet interface on which MAC security is autosaved. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4 | ColumnsnPortMacSecurityAutosaveMacAddress | read-only | current | The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2 | NodesnPortMacGlobalSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.1 | ScalarsnPortMacGlobalSecurityFeature | read-write | current | Port security for this device can be either disabled or enabled. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.2 | ScalarsnPortMacGlobalSecurityAgeOutTime | read-write | current | The amount of time, in minutes, MAC addresses learned on this device will remain secure. It allows configurable values in the range of 0-1440. 0 means no aging… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.3 | ScalarsnPortMacGlobalSecurityAutosave | read-write | current | The port security autosave value for this device. It allows configurable values 0 and also in the range of 15-1440. The value 0 means no autosave. |
| 1.3.6.1.4.1.1991.1.1.3.25 | NodesnPortMonitor | |||
| 1.3.6.1.4.1.1991.1.1.3.25.1 | TablesnPortMonitorTable | not-accessible | current | Status of port monitoring on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1 | RowsnPortMonitorEntry | not-accessible | current | An entry in the snPortMonitorTable |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1.1 | ColumnsnPortMonitorIfIndex | not-accessible | current | ifIndex value of the local interface on which monitoring is configuerd. |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1.2 | ColumnsnPortMonitorMirrorList | read-write | current | Lists the monitoring configuration of this port. The value is a space delimited sequence of ifIndex of mirror port and monitor mode. The values for mode can be… |
| 1.3.6.1.4.1.1991.1.1.3.26 | NodesnSSH | |||
| 1.3.6.1.4.1.1991.1.1.3.27 | NodesnSSL | |||
| 1.3.6.1.4.1.1991.1.1.3.28 | NodesnMacAuth | |||
| 1.3.6.1.4.1.1991.1.1.3.29 | NodesnMetroRing | |||
| 1.3.6.1.4.1.1991.1.1.3.31 | NodesnStacking | |||
| 1.3.6.1.4.1.1991.1.1.3.32 | NodefdryMacVlanMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.33 | NodefdryLinkAggregationGroupMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.34 | NodefdryDns2MIB | |||
| 1.3.6.1.4.1.1991.1.1.3.35 | NodefdryDaiMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.36 | NodefdryDhcpSnoopMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.37 | NodefdryIpSrcGuardMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.39 | NodebrcdRouteMap | |||
| 1.3.6.1.4.1.1991.1.1.3.40 | NodebrcdSPXMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.41 | NodebrcdStackISSUMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.43 | NoderuckusWiredClientMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.46 | NoderuckusDhcpClientMIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BrcdVlanIdOrNoneTC | Integer32 (0 | 1..4090) | current | The VLAN-ID that uniquely identifies a specific VLAN or to no VLAN. |
| BrcdVlanIdTC | Integer32 (1..4090) | current | The VLAN-ID that uniquely identifies a specific VLAN. |
| BridgeId | OCTET STRING (SIZE(8)) | current | the Bridge-Identifier as used in the Spanning Tree |
| FdryVlanIdOrNoneTC | Integer32 (0 | 1..4094) | current | The VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must… |
| InterfaceId | current | ||
| InterfaceId2 | current | ||
| PhysAddress | OCTET STRING | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |
| PortMask | Integer32 | current | This data type is used to model port bitmask. The maximum of ports are 32. |
| PortQosTC | INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7), invalid(127) } | current | The port QOS Priority hardware queue. 0 is lowest priority, 7 is the highest. |
| Timeout | Integer32 | current | a STP timer in units of 1/100 seconds |
| VlanTagMode | INTEGER{ tagged(1), untagged(2), dual(3) } | current | Vlan tag mode for a given vlan member. |