FOUNDRY-SN-AGENT-MIB
443 objects
No module-level DESCRIPTION found.
Imported Objects
| FOUNDRY-SN-ROOT-MIB | snAgentSys snChassis snStack |
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.1.1 | NodesnChasGen | |||
| 1.3.6.1.4.1.1991.1.1.1.1.1 | ScalarsnChasType | read-only | current | The chassis type represents the type of Ruckus Wireless product being managed. |
| 1.3.6.1.4.1.1991.1.1.1.1.2 | ScalarsnChasSerNum | read-only | current | The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.1.3 | ScalarsnChasPwrSupplyStatus | read-only | deprecated | This object is being deprecated, please use snChasPwrSupplyTable instead. A bit array that contains the value of the Chassis Power Supplies. This is a packed b… |
| 1.3.6.1.4.1.1991.1.1.1.1.4 | ScalarsnChasFanStatus | read-only | deprecated | This object is being deprecated, please use snChasFanTable instead. A bit array that contains the value of the fan status. This is a packed bit string. The sta… |
| 1.3.6.1.4.1.1991.1.1.1.1.5 | ScalarsnChasMainBrdDescription | read-only | current | The main board description string. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.6 | ScalarsnChasMainPortTotal | read-only | current | The total number of ports for the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.7 | ScalarsnChasExpBrdDescription | read-only | current | The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.8 | ScalarsnChasExpPortTotal | read-only | current | The total number of ports for the expansion board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.9 | ScalarsnChasStatusLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.10 | ScalarsnChasTrafficLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.11 | ScalarsnChasMediaLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.12 | ScalarsnChasEnablePwrSupplyTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate power supply failure traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.13 | ScalarsnChasMainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.1.1.14 | ScalarsnChasExpBrdId | read-only | current | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.1991.1.1.1.1.15 | ScalarsnChasSpeedLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.16 | ScalarsnChasEnableFanTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate fan failure traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.17 | ScalarsnChasIdNumber | read-write | current | An administratively-assigned chassis identity number, used by inventory control. |
| 1.3.6.1.4.1.1991.1.1.1.1.18 | ScalarsnChasActualTemperature | read-only | current | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.1991.1.1.1.1.19 | ScalarsnChasWarningTemperature | read-write | current | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.1991.1.1.1.1.20 | ScalarsnChasShutdownTemperature | read-write | current | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.1991.1.1.1.1.21 | ScalarsnChasEnableTempWarnTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate temperature warning traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.22 | ScalarsnChasFlashCard | read-only | current | A bit array that contains the value of the flash card status. This is a packed bit string. The status of each flash card is encoded into one bit. bit value mea… |
| 1.3.6.1.4.1.1991.1.1.1.1.23 | ScalarsnChasFlashCardLeds | read-only | current | A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning … |
| 1.3.6.1.4.1.1991.1.1.1.1.24 | ScalarsnChasNumSlots | read-only | current | Number of slots of the chassis. |
| 1.3.6.1.4.1.1991.1.1.1.1.25 | ScalarsnChasArchitectureType | read-only | current | Architecture type. |
| 1.3.6.1.4.1.1991.1.1.1.1.26 | ScalarsnChasProductType | read-only | current | Product type. |
| 1.3.6.1.4.1.1991.1.1.1.1.30 | ScalarsnChasGlobalIgnoreShutdownTemperature | read-write | current | Enable/Disable the temperature threshold shutdown (Battleshort mode) feature at global level. Able to fetch the temperature threshold shutdown (Battleshort mod… |
| 1.3.6.1.4.1.1991.1.1.1.2 | NodesnChasPwr | |||
| 1.3.6.1.4.1.1991.1.1.1.2.1 | TablesnChasPwrSupplyTable | not-accessible | current | A table of each power supply information. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1 | RowsnChasPwrSupplyEntry | not-accessible | current | A row in the power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.1 | ColumnsnChasPwrSupplyIndex | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.2 | ColumnsnChasPwrSupplyDescription | read-only | current | The power supply description string. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.3 | ColumnsnChasPwrSupplyOperStatus | read-only | current | The power supply operation status. |
| 1.3.6.1.4.1.1991.1.1.1.2.2 | TablesnChasPwrSupply2Table | not-accessible | current | A table of each power supply information for each unit. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1 | RowsnChasPwrSupply2Entry | not-accessible | current | A row in the power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.1 | ColumnsnChasPwrSupply2Unit | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.2 | ColumnsnChasPwrSupply2Index | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.3 | ColumnsnChasPwrSupply2Description | read-only | current | The power supply description string. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.4 | ColumnsnChasPwrSupply2OperStatus | read-only | current | The power supply operation status. |
| 1.3.6.1.4.1.1991.1.1.1.3 | NodesnChasFan | |||
| 1.3.6.1.4.1.1991.1.1.1.3.1 | TablesnChasFanTable | not-accessible | current | A table of each fan information. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1 | RowsnChasFanEntry | not-accessible | current | A row in the fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.1 | ColumnsnChasFanIndex | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.2 | ColumnsnChasFanDescription | read-only | current | The fan description string. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.3 | ColumnsnChasFanOperStatus | read-only | current | The fan operation status. |
| 1.3.6.1.4.1.1991.1.1.1.3.2 | TablesnChasFan2Table | not-accessible | current | A table of each fan information for each unit. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1 | RowsnChasFan2Entry | not-accessible | current | A row in the fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.1 | ColumnsnChasFan2Unit | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.2 | ColumnsnChasFan2Index | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.3 | ColumnsnChasFan2Description | read-only | current | The fan description string. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.4 | ColumnsnChasFan2OperStatus | read-only | current | The fan operation status. |
| 1.3.6.1.4.1.1991.1.1.1.4 | NodesnChasUnit | |||
| 1.3.6.1.4.1.1991.1.1.1.4.1 | TablesnChasUnitTable | not-accessible | current | A table of chassis information for each unit. Only active chassis appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1 | RowsnChasUnitEntry | not-accessible | current | A row in the chassis table. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.1 | ColumnsnChasUnitIndex | read-only | current | The index to chassis table. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.2 | ColumnsnChasUnitSerNum | read-only | current | The serial number of the chassis for each unit. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.3 | ColumnsnChasUnitNumSlots | read-only | current | Number of slots of the chassis for each unit. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.4 | ColumnsnChasUnitActualTemperature | read-only | current | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.5 | ColumnsnChasUnitWarningTemperature | read-only | current | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.6 | ColumnsnChasUnitShutdownTemperature | read-only | current | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.7 | ColumnsnChasUnitPartNum | read-only | current | The part number of the chassis for each unit. If the part number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.8 | ColumnsnChasUnitIgnoreShutdownTemperature | read-write | current | Enable/Disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Able to fetch the temperature threshold shutdown (Battleshor… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.9 | ColumnsnChasUnitFanless | read-write | current | Fanless mode can be enabled or disabled on certain FI devices. none (0): not applicable to the device. enabled(1): fanless mode is enabled on the device disabl… |
| 1.3.6.1.4.1.1991.1.1.2.1 | NodesnAgentGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.1.1 | ScalarsnAgReload | read-write | current | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4)......… |
| 1.3.6.1.4.1.1991.1.1.2.1.2 | ScalarsnAgEraseNVRAM | read-write | current | Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is era… |
| 1.3.6.1.4.1.1991.1.1.2.1.3 | ScalarsnAgWriteNVRAM | read-write | current | Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash … |
| 1.3.6.1.4.1.1991.1.1.2.1.4 | ScalarsnAgConfigFromNVRAM | not-accessible | current | Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configin… |
| 1.3.6.1.4.1.1991.1.1.2.1.5 | ScalarsnAgTftpServerIp | read-write | deprecated | The tftp server address, this will be used for both download/upload image file and config file. |
| 1.3.6.1.4.1.1991.1.1.2.1.6 | ScalarsnAgImgFname | read-write | current | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. |
| 1.3.6.1.4.1.1991.1.1.2.1.7 | ScalarsnAgImgLoad | read-write | current | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loa… |
| 1.3.6.1.4.1.1991.1.1.2.1.8 | ScalarsnAgCfgFname | read-write | current | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple f… |
| 1.3.6.1.4.1.1991.1.1.2.1.9 | ScalarsnAgCfgLoad | read-write | current | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongF… |
| 1.3.6.1.4.1.1991.1.1.2.1.10 | ScalarsnAgDefGwayIp | read-write | current | The default gateway (router) address. |
| 1.3.6.1.4.1.1991.1.1.2.1.11 | ScalarsnAgImgVer | read-only | current | The version of the running software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.1991.1.1.2.1.12 | ScalarsnAgFlashImgVer | read-only | current | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, th… |
| 1.3.6.1.4.1.1991.1.1.2.1.13 | ScalarsnAgGblIfIpAddr | read-write | current | The interface ip address. |
| 1.3.6.1.4.1.1991.1.1.2.1.14 | ScalarsnAgGblIfIpMask | read-write | current | The interface ip address mask. |
| 1.3.6.1.4.1.1991.1.1.2.1.15 | ScalarsnAgGblPassword | read-write | current | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object n… |
| 1.3.6.1.4.1.1991.1.1.2.1.16 | ScalarsnAgTrpRcvrCurEntry | read-only | current | The current total entries of the Trap Receiver Table are created. |
| 1.3.6.1.4.1.1991.1.1.2.1.19 | ScalarsnAgGblDataRetrieveMode | read-write | current | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nex… |
| 1.3.6.1.4.1.1991.1.1.2.1.20 | ScalarsnAgSystemLog | read-write | current | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and fol… |
| 1.3.6.1.4.1.1991.1.1.2.1.21 | ScalarsnAgGblEnableColdStartTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.22 | ScalarsnAgGblEnableLinkUpTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate link up traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.23 | ScalarsnAgGblEnableLinkDownTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate link down traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.24 | ScalarsnAgGblPasswordChangeMode | read-only | current | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interf… |
| 1.3.6.1.4.1.1991.1.1.2.1.25 | ScalarsnAgGblReadOnlyCommunity | read-write | current | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this o… |
| 1.3.6.1.4.1.1991.1.1.2.1.26 | ScalarsnAgGblReadWriteCommunity | read-write | current | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on … |
| 1.3.6.1.4.1.1991.1.1.2.1.27 | ScalarsnAgGblCurrentSecurityLevel | read-only | current | This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations. |
| 1.3.6.1.4.1.1991.1.1.2.1.28 | ScalarsnAgGblSecurityLevelSet | read-write | current | This shows which the security level password to be set. |
| 1.3.6.1.4.1.1991.1.1.2.1.29 | ScalarsnAgGblLevelPasswordsMask | read-only | current | This shows the bitmap of level passwords which successfully assigned to the system. |
| 1.3.6.1.4.1.1991.1.1.2.1.30 | ScalarsnAgGblQueueOverflow | read-only | current | false - The device queues are not overflow. true - The device queues are overflow. |
| 1.3.6.1.4.1.1991.1.1.2.1.31 | ScalarsnAgGblBufferShortage | read-only | current | false - The device buffers are adequate. true - The device buffers are in shortage. |
| 1.3.6.1.4.1.1991.1.1.2.1.32 | ScalarsnAgGblDmaFailure | read-only | current | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
| 1.3.6.1.4.1.1991.1.1.2.1.33 | ScalarsnAgGblResourceLowWarning | read-only | current | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
| 1.3.6.1.4.1.1991.1.1.2.1.34 | ScalarsnAgGblExcessiveErrorWarning | read-only | current | false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have. |
| 1.3.6.1.4.1.1991.1.1.2.1.35 | ScalarsnAgGblCpuUtilData | read-only | current | The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilColle… |
| 1.3.6.1.4.1.1991.1.1.2.1.36 | ScalarsnAgGblCpuUtilCollect | read-write | deprecated | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the… |
| 1.3.6.1.4.1.1991.1.1.2.1.37 | ScalarsnAgGblTelnetTimeout | read-write | current | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.2.1.38 | ScalarsnAgGblEnableWebMgmt | read-write | current | Enable/disable web management. |
| 1.3.6.1.4.1.1991.1.1.2.1.39 | ScalarsnAgGblSecurityLevelBinding | read-only | current | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
| 1.3.6.1.4.1.1991.1.1.2.1.40 | ScalarsnAgGblEnableSLB | read-only | current | Enable/disable Server Load Balancing. |
| 1.3.6.1.4.1.1991.1.1.2.1.41 | ScalarsnAgSoftwareFeature | read-only | current | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For ea… |
| 1.3.6.1.4.1.1991.1.1.2.1.42 | ScalarsnAgGblEnableModuleInsertedTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.43 | ScalarsnAgGblEnableModuleRemovedTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.44 | ScalarsnAgGblTrapMessage | read-only | current | A generic trap message string. |
| 1.3.6.1.4.1.1991.1.1.2.1.45 | ScalarsnAgGblEnableTelnetServer | read-write | current | Enable or disable telnet server in device. |
| 1.3.6.1.4.1.1991.1.1.2.1.46 | ScalarsnAgGblTelnetPassword | read-write | current | Telnet Access Password and this is only useful for write operation. A read operation get a null string. Set operation on this object is allowed only if command… |
| 1.3.6.1.4.1.1991.1.1.2.1.47 | ScalarsnAgBuildDate | read-only | current | The date of the built software. |
| 1.3.6.1.4.1.1991.1.1.2.1.48 | ScalarsnAgBuildtime | read-only | current | The time of the built software. |
| 1.3.6.1.4.1.1991.1.1.2.1.49 | ScalarsnAgBuildVer | read-only | current | The version of the built software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.1991.1.1.2.1.50 | ScalarsnAgGblCpuUtil1SecAvg | read-only | current | The statistics collection of 1 second CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.51 | ScalarsnAgGblCpuUtil5SecAvg | read-only | current | The statistics collection of 5 second CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.52 | ScalarsnAgGblCpuUtil1MinAvg | read-only | current | The statistics collection of 1 minute CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.53 | ScalarsnAgGblDynMemUtil | read-only | deprecated | The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil |
| 1.3.6.1.4.1.1991.1.1.2.1.54 | ScalarsnAgGblDynMemTotal | read-only | deprecated | The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal |
| 1.3.6.1.4.1.1991.1.1.2.1.55 | ScalarsnAgGblDynMemFree | read-only | deprecated | The free amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMFree |
| 1.3.6.1.4.1.1991.1.1.2.1.56 | ScalarsnAgImgLoadSPModuleType | read-write | current | The switch processor module type of which that receives the downloaded image. |
| 1.3.6.1.4.1.1991.1.1.2.1.57 | ScalarsnAgImgLoadSPModuleNumber | read-write | current | The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. |
| 1.3.6.1.4.1.1991.1.1.2.1.58 | ScalarsnAgTrapHoldTime | read-write | current | The time in seconds for which traps will be witheld during system initialization. |
| 1.3.6.1.4.1.1991.1.1.2.1.59 | ScalarsnAgSFlowSourceInterface | read-write | current | Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indi… |
| 1.3.6.1.4.1.1991.1.1.2.1.60 | ScalarsnAgGblTelnetLoginTimeout | read-write | current | Telnet session login timeout value in minutes. Default is 2 minutes. |
| 1.3.6.1.4.1.1991.1.1.2.1.61 | ScalarsnAgGblBannerExec | read-write | current | EXEC process creation banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.62 | ScalarsnAgGblBannerIncoming | read-write | current | Incoming terminal line banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.63 | ScalarsnAgGblBannerMotd | read-write | current | Message-of-the-day banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.64 | ScalarsnAgWebMgmtServerTcpPort | read-write | current | The TCP port number of web management interface. |
| 1.3.6.1.4.1.1991.1.1.2.1.65 | ScalarsnAgTftpServerAddrType | read-write | current | TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2) |
| 1.3.6.1.4.1.1991.1.1.2.1.66 | ScalarsnAgTftpServerAddr | read-write | current | TFTP server IP address. |
| 1.3.6.1.4.1.1991.1.1.2.1.68 | ScalarsnAgGblPasswordCheckMode | read-only | current | enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is … |
| 1.3.6.1.4.1.1991.1.1.2.1.69 | ScalarsnAgGblEnableTelnetAuthentication | read-write | current | Enable or disable telnet authentication in device. |
| 1.3.6.1.4.1.1991.1.1.2.1.70 | ScalarsnAgGblManager2FactorAuthentication | read-write | current | enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed and all incoming SSH sessions to device are closed when… |
| 1.3.6.1.4.1.1991.1.1.2.2 | NodesnAgentBrd | |||
| 1.3.6.1.4.1.1991.1.1.2.2.1 | TablesnAgentBrdTable | not-accessible | current | A table of each physical board information. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1 | RowsnAgentBrdEntry | not-accessible | current | A row in the Agent Board table. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.1 | ColumnsnAgentBrdIndex | read-only | current | The index to the Agent Interface Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.2 | ColumnsnAgentBrdMainBrdDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.3 | ColumnsnAgentBrdMainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.4 | ColumnsnAgentBrdMainPortTotal | read-only | current | The total number of ports for the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.5 | ColumnsnAgentBrdExpBrdDescription | read-only | current | The expansion board description string. Expansion board are those boards attaching on the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.6 | ColumnsnAgentBrdExpBrdId | read-only | current | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.7 | ColumnsnAgentBrdExpPortTotal | read-only | current | The total number of ports for the expansion board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.8 | ColumnsnAgentBrdStatusLeds | read-only | deprecated | A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.9 | ColumnsnAgentBrdTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maxi… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.10 | ColumnsnAgentBrdMediaLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.11 | ColumnsnAgentBrdSpeedLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.12 | ColumnsnAgentBrdModuleStatus | read-only | current | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.13 | ColumnsnAgentBrdRedundantStatus | read-only | current | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.14 | ColumnsnAgentBrdAlarmLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each s… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.15 | ColumnsnAgentBrdTxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.16 | ColumnsnAgentBrdRxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.17 | ColumnsnAgentBrdStatusLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.18 | ColumnsnAgentBrdTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.19 | ColumnsnAgentBrdMediaLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.20 | ColumnsnAgentBrdSpeedLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.21 | ColumnsnAgentBrdAlarmLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.22 | ColumnsnAgentBrdTxTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.23 | ColumnsnAgentBrdRxTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.24 | ColumnsnAgentBrdMemoryTotal | read-only | current | The total memory in bytes within this module. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.25 | ColumnsnAgentBrdMemoryAvailable | read-only | current | The total memory in bytes available for use within this module. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.26 | ColumnsnAgentBrdSerialNumber | read-only | current | The Board Serial number. Zero length string indicates that module serial number has not been programmed within EEPROM or the module does not support serial num… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.27 | ColumnsnAgentBrdPartNumber | read-only | current | The Board Part number. Zero length string indicates that module part number has not been programmed within EEPROM or the module does not support part number wi… |
| 1.3.6.1.4.1.1991.1.1.2.2.2 | TablesnAgentBrd2Table | not-accessible | current | A table of each physical board information for each unit. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1 | RowsnAgentBrd2Entry | not-accessible | current | A row in the Agent Board table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.1 | ColumnsnAgentBrd2Unit | read-only | current | The index to the Agent module Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.2 | ColumnsnAgentBrd2Slot | read-only | current | The index to the Agent module Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.3 | ColumnsnAgentBrd2MainBrdDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.4 | ColumnsnAgentBrd2MainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.5 | ColumnsnAgentBrd2MainPortTotal | read-only | current | The total number of ports for the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.6 | ColumnsnAgentBrd2ModuleStatus | read-only | current | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.7 | ColumnsnAgentBrd2RedundantStatus | read-only | current | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.1991.1.1.2.3 | NodesnAgentTrp | |||
| 1.3.6.1.4.1.1991.1.1.2.3.1 | TablesnAgTrpRcvrTable | not-accessible | deprecated | A table of managers which to send traps. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1 | RowsnAgTrpRcvrEntry | not-accessible | deprecated | A row in the trap receiver table. The column snAgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects snAgTrp… |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.1 | ColumnsnAgTrpRcvrIndex | read-only | deprecated | The index to the Trap Receiver Table. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.2 | ColumnsnAgTrpRcvrIpAddr | read-write | deprecated | The ip address for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.3 | ColumnsnAgTrpRcvrCommunityOrSecurityName | read-write | deprecated | Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.4 | ColumnsnAgTrpRcvrStatus | read-write | deprecated | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: ignore(5)...don't use this entry t… |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.5 | ColumnsnAgTrpRcvrUDPPort | read-write | deprecated | UDP port number of the trap receiver. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.6 | ColumnsnAgTrpRcvrSecurityModel | read-write | deprecated | Version of trap format to be used. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.7 | ColumnsnAgTrpRcvrSecurityLevel | read-write | deprecated | Used for USM (SNMPv3) security model to specify the level of security. The security name is provided by snAgTrpRcvrCommunityOrSecurityName. |
| 1.3.6.1.4.1.1991.1.1.2.4 | NodesnAgentBoot | |||
| 1.3.6.1.4.1.1991.1.1.2.4.1 | TablesnAgBootSeqTable | not-accessible | current | A table of image load sequnce instructions to the boot code. Boot code will start from instruction of the first valid entry to load the image. If failed, it wi… |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1 | RowsnAgBootSeqEntry | not-accessible | current | A row in the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.1 | ColumnsnAgBootSeqIndex | read-only | current | The index to the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.2 | ColumnsnAgBootSeqInstruction | read-write | current | The instruction for the boot code. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.3 | ColumnsnAgBootSeqIpAddr | read-write | current | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.4 | ColumnsnAgBootSeqFilename | read-write | current | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.5 | ColumnsnAgBootSeqRowStatus | read-write | current | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.1991.1.1.2.4.2 | TablesnAgSpBootSeqTable | not-accessible | current | A table of image load sequnce instructions to the boot code for the slave (line) modules. Boot code will start from instruction of the first valid entry to loa… |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1 | RowsnAgSpBootSeqEntry | not-accessible | current | A row in the slave module boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.1 | ColumnsnAgSpBootSeqSpNumber | not-accessible | current | The slot numner of a slave/witch processor module for which this boot sequence applies. Setting value 0 applies to all SP modules. Index 0 is valid only for se… |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.2 | ColumnsnAgSpBootSeqIndex | not-accessible | current | The index to the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.3 | ColumnsnAgSpBootSeqInstruction | read-write | current | The instruction for the boot code. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.4 | ColumnsnAgSpBootSeqIpAddr | read-write | current | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.5 | ColumnsnAgSpBootSeqFilename | read-write | current | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.6 | ColumnsnAgSpBootSeqRowStatus | read-write | current | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.1991.1.1.2.5 | NodesnAgCfgEos | |||
| 1.3.6.1.4.1.1991.1.1.2.5.1 | TablesnAgCfgEosTable | not-accessible | current | This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file … |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1 | RowsnAgCfgEosEntry | not-accessible | current | An EOS row in the table of encoded octet strings for table snAgCfgEosTable. |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.1 | ColumnsnAgCfgEosIndex | read-only | current | Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.2 | ColumnsnAgCfgEosPacket | read-write | current | An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equa… |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.3 | ColumnsnAgCfgEosChkSum | read-write | current | A checksum of each configuration file data packet. |
| 1.3.6.1.4.1.1991.1.1.2.6 | NodesnAgentLog | |||
| 1.3.6.1.4.1.1991.1.1.2.6.1 | NodesnAgSysLogGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.6.1.1 | ScalarsnAgSysLogGblEnable | read-write | current | Enable/disable system logging. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.2 | ScalarsnAgSysLogGblBufferSize | read-write | current | The number of dynamic system logging entries. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.3 | ScalarsnAgSysLogGblClear | read-write | current | Clear dynamic and/or static system logging buffers. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.4 | ScalarsnAgSysLogGblCriticalLevel | read-write | current | Filter events going to the logging buffer. This is a packed bit string object of which each bit has the following meaning: (bit 0 is the least significant bit)… |
| 1.3.6.1.4.1.1991.1.1.2.6.1.5 | ScalarsnAgSysLogGblLoggedCount | read-only | current | The number events logged in the system logging buffer. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.6 | ScalarsnAgSysLogGblDroppedCount | read-only | current | The number of events dropped. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.7 | ScalarsnAgSysLogGblFlushedCount | read-only | current | The number of times that the system logging buffer was cleared. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.8 | ScalarsnAgSysLogGblOverrunCount | read-only | current | The number of times that the system logging buffer was wrapped around. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.9 | ScalarsnAgSysLogGblServer | read-write | deprecated | IP address of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.10 | ScalarsnAgSysLogGblFacility | read-write | current | Facility code. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.11 | ScalarsnAgSysLogGblPersistenceEnable | read-write | current | Enable/disable system logging persistence. |
| 1.3.6.1.4.1.1991.1.1.2.6.2 | TablesnAgSysLogBufferTable | not-accessible | current | Dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1 | RowsnAgSysLogBufferEntry | not-accessible | current | A row in the dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.1 | ColumnsnAgSysLogBufferIndex | read-only | current | The index to the dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.2 | ColumnsnAgSysLogBufferTimeStamp | read-only | current | A time stamp when the event is logged. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.3 | ColumnsnAgSysLogBufferCriticalLevel | read-only | current | The critical level of this event. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.4 | ColumnsnAgSysLogBufferMessage | read-only | current | The system logging message. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.5 | ColumnsnAgSysLogBufferCalTimeStamp | read-only | current | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.1991.1.1.2.6.3 | TablesnAgStaticSysLogBufferTable | not-accessible | current | Static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1 | RowsnAgStaticSysLogBufferEntry | not-accessible | current | A row in the static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.1 | ColumnsnAgStaticSysLogBufferIndex | read-only | current | The index to the static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.2 | ColumnsnAgStaticSysLogBufferTimeStamp | read-only | current | A time stamp when the event is logged. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.3 | ColumnsnAgStaticSysLogBufferCriticalLevel | read-only | current | The critical level of this event. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.4 | ColumnsnAgStaticSysLogBufferMessage | read-only | current | The system logging message. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.5 | ColumnsnAgStaticSysLogBufferCalTimeStamp | read-only | current | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.1991.1.1.2.6.4 | TablesnAgSysLogServerTable | not-accessible | current | System Log Server table. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1 | RowsnAgSysLogServerEntry | not-accessible | current | A row in the SysLog Server table. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.1 | ColumnsnAgSysLogServerIP | read-only | current | IP address of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.2 | ColumnsnAgSysLogServerUDPPort | read-only | current | UDP port number of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.3 | ColumnsnAgSysLogServerRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.2.7 | NodesnAgentSysParaConfig | |||
| 1.3.6.1.4.1.1991.1.1.2.7.1 | TablesnAgentSysParaConfigTable | not-accessible | current | A table of Agent of each board. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1 | RowsnAgentSysParaConfigEntry | not-accessible | current | A row in the Agent System Parameters Configuation table. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.1 | ColumnsnAgentSysParaConfigIndex | read-only | current | The index to the Agent System Parameters Configuation Table. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.2 | ColumnsnAgentSysParaConfigDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.3 | ColumnsnAgentSysParaConfigMin | read-only | current | The minimum value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.4 | ColumnsnAgentSysParaConfigMax | read-only | current | The maximum value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.5 | ColumnsnAgentSysParaConfigDefault | read-only | current | The default value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.6 | ColumnsnAgentSysParaConfigCurrent | read-write | current | The current configurated value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.8 | NodesnAgentConfigModule | |||
| 1.3.6.1.4.1.1991.1.1.2.8.1 | TablesnAgentConfigModuleTable | not-accessible | current | A table of each configured module information. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1 | RowsnAgentConfigModuleEntry | not-accessible | current | A row in the Agent Configured Module table. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.1 | ColumnsnAgentConfigModuleIndex | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.2 | ColumnsnAgentConfigModuleType | read-write | current | The Configured Module Type. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.3 | ColumnsnAgentConfigModuleRowStatus | read-write | current | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.4 | ColumnsnAgentConfigModuleDescription | read-only | current | A description of the configured module. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.5 | ColumnsnAgentConfigModuleOperStatus | read-only | current | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.6 | ColumnsnAgentConfigModuleSerialNumber | read-only | current | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.7 | ColumnsnAgentConfigModuleNumberOfPorts | read-only | current | The number of ports of module. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.8 | ColumnsnAgentConfigModuleMgmtModuleType | read-only | current | Management module type. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.9 | ColumnsnAgentConfigModuleNumberOfCpus | read-only | current | The number of module CPUs. |
| 1.3.6.1.4.1.1991.1.1.2.8.2 | TablesnAgentConfigModule2Table | not-accessible | current | A table of each configured stacking module information. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1 | RowsnAgentConfigModule2Entry | not-accessible | current | A row in the Agent Configured Stacking Module table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.1 | ColumnsnAgentConfigModule2Unit | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.2 | ColumnsnAgentConfigModule2Slot | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.3 | ColumnsnAgentConfigModule2Type | read-write | current | The Configured Module Type. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.4 | ColumnsnAgentConfigModule2RowStatus | read-write | current | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.5 | ColumnsnAgentConfigModule2Description | read-only | current | A description of the configured module. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.6 | ColumnsnAgentConfigModule2OperStatus | read-only | current | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.7 | ColumnsnAgentConfigModule2SerialNumber | read-only | current | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.8 | ColumnsnAgentConfigModule2NumberOfPorts | read-only | current | The number of ports of module. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.9 | ColumnsnAgentConfigModule2MgmtModuleType | read-only | current | Management module type. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.10 | ColumnsnAgentConfigModule2NumberOfCpus | read-only | current | The number of module CPUs. |
| 1.3.6.1.4.1.1991.1.1.2.9 | NodesnAgentUser | |||
| 1.3.6.1.4.1.1991.1.1.2.9.1 | NodesnAgentUserGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.9.1.1 | ScalarsnAgentUserMaxAccnt | read-only | current | Maximum number of user account entries can be configured. |
| 1.3.6.1.4.1.1991.1.1.2.9.2 | TablesnAgentUserAccntTable | not-accessible | current | A table of user account information. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1 | RowsnAgentUserAccntEntry | not-accessible | current | A row in the Agent User table. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.1 | ColumnsnAgentUserAccntName | read-only | current | The user name. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.2 | ColumnsnAgentUserAccntPassword | read-write | current | The user password. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.3 | ColumnsnAgentUserAccntEncryptCode | read-write | current | The password encryption method code. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.4 | ColumnsnAgentUserAccntPrivilege | read-write | current | The user privilege. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.5 | ColumnsnAgentUserAccntRowStatus | read-write | current | To create or delete a user account table entry. |
| 1.3.6.1.4.1.1991.1.1.2.10 | NodesnAgentRedundant | |||
| 1.3.6.1.4.1.1991.1.1.2.10.1 | NodesnAgentRedunGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.10.1.1 | ScalarsnAgentRedunActiveMgmtMod | read-write | current | Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to flash storage and reboot the sy… |
| 1.3.6.1.4.1.1991.1.1.2.10.1.2 | ScalarsnAgentRedunSyncConfig | read-write | current | Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second. Setting a value 0 will disab… |
| 1.3.6.1.4.1.1991.1.1.2.10.1.3 | ScalarsnAgentRedunBkupCopyBootCode | read-write | current | If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever … |
| 1.3.6.1.4.1.1991.1.1.2.10.1.4 | ScalarsnAgentEnableMgmtModRedunStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps. |
| 1.3.6.1.4.1.1991.1.1.2.10.1.5 | ScalarsnAgentRedunBkupBootLoad | read-write | current | Action object to down load a new boot code from boot flash storage of the active management module to the backup management module. The following are returned … |
| 1.3.6.1.4.1.1991.1.1.2.10.1.6 | ScalarsnAgentRedunSwitchOver | read-write | current | To force a switch-over from standby to active state if the backup management module exists in a chassis. |
| 1.3.6.1.4.1.1991.1.1.2.11 | NodesnAgentCpu | |||
| 1.3.6.1.4.1.1991.1.1.2.11.1 | TablesnAgentCpuUtilTable | not-accessible | current | Table to list utilization for all CPUs in the device. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1 | RowsnAgentCpuUtilEntry | not-accessible | current | A row in the CPU utilization table. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.1 | ColumnsnAgentCpuUtilSlotNum | read-only | current | The slot number of module which contains the cpu. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.2 | ColumnsnAgentCpuUtilCpuId | read-only | current | The id of cpu. For non-VM1/WSM management module, there is one CPU. For VM1/WSM there's one management CPU and three slave CPUs. The management CPU could be tu… |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.3 | ColumnsnAgentCpuUtilInterval | read-only | current | The value, in seconds, for this utilization. For both management and slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec interval. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.4 | ColumnsnAgentCpuUtilValue | read-only | deprecated | The statistical CPU utilization in units of one-hundredth of a percent. This value is deprecated. Users are recommended to use snAgentCpuUtilPercent or snAgent… |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.5 | ColumnsnAgentCpuUtilPercent | read-only | current | The statistical CPU utilization in units of a percent. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.6 | ColumnsnAgentCpuUtil100thPercent | read-only | current | The statistical CPU utilization in units of one-hundredth of a percent. |
| 1.3.6.1.4.1.1991.1.1.2.11.2 | TablesnCpuProcessTable | not-accessible | current | Table to list utilization and runtime for all CPU processes in the device. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1 | RowsnCpuProcessEntry | not-accessible | current | A row in the CPU process table. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.1 | ColumnsnCpuProcessName | read-only | current | The process name. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.2 | ColumnsnCpuProcess5SecUtil | read-only | current | The statistics collection of last 5 second process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.3 | ColumnsnCpuProcess1MinUtil | read-only | current | The statistics collection of last 1 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.4 | ColumnsnCpuProcess5MinUtil | read-only | current | The statistics collection of last 5 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.5 | ColumnsnCpuProcess15MinUtil | read-only | current | The statistics collection of last 15 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.6 | ColumnsnCpuProcessRuntime | read-only | current | Process runtime in milliseconds. |
| 1.3.6.1.4.1.1991.1.1.2.12 | NodesnAgentHw | |||
| 1.3.6.1.4.1.1991.1.1.2.12.1 | TablesnAgentHwICBMCounterTable | not-accessible | current | Table to list the ICBM counter values. This table is not supported on 10G module. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1 | RowsnAgentHwICBMCounterEntry | not-accessible | current | A row representing ICBM counter values for that slot. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.1 | ColumnsnAgentHwICBMCounterSlot | read-only | current | Slot number where ICBM resides. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.2 | ColumnsnAgentHwICBMCounterDMA | read-only | current | DMA Id within a slot where ICBM resides. Valid only for Jetcore modules. For non-Jetcore modules, this index is ignored by the agent. In this case, value 0 wil… |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.3 | ColumnsnAgentHwICBMCounterFreeDepth | read-only | current | Current depth of the free queue for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.4 | ColumnsnAgentHwICBMCounterWriteDrop | read-only | current | Write sequencer drop count for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.5 | ColumnsnAgentHwICBMCounterWriteInput | read-only | current | Write sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.6 | ColumnsnAgentHwICBMCounterWriteOutput | read-only | current | Write sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.7 | ColumnsnAgentHwICBMCounterReadInput | read-only | current | Read sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.8 | ColumnsnAgentHwICBMCounterReadOutput | read-only | current | Read sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.2 | TablesnCAMIpStatTable | not-accessible | current | Table to list the IP CAM statistics. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1 | RowsnCAMIpStatEntry | not-accessible | current | A row representing IP CAM statistics for a given interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.1 | ColumnsnCAMIpStatIfIndex | read-only | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.2 | ColumnsnCAMIpStatLevel | read-only | current | Level of CAM entry for that interface. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.3 | ColumnsnCAMIpStatFreeEntries | read-only | current | Free entries in the IP CAM for that interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.4 | ColumnsnCAMIpStatTotalEntries | read-only | current | Total entries in the IP CAM for that interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.3 | TablesnCAMStatTable | not-accessible | current | Table to list the CAM statistics. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1 | RowsnCAMStatEntry | not-accessible | current | A row representing CAM statistics for a given DMA Id number. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.1 | ColumnsnCamStatDMAIdNumber | read-only | current | DMA Id number. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.2 | ColumnsnCamStatDMAMasterNumber | read-only | current | DMA Master for that DMA Id. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.3 | ColumnsnCamStatFreePool0Entries | read-only | current | CAM free pool0 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.4 | ColumnsnCamStatFreePool1Entries | read-only | current | CAM free pool1 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.5 | ColumnsnCamStatFreePool2Entries | read-only | current | CAM free pool2 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.6 | ColumnsnCamStatFreePool3Entries | read-only | current | CAM free pool3 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.7 | ColumnsnCamStatFreeL2Entries | read-only | current | CAM Free L2 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.8 | ColumnsnCamStatFreeL2LowestSection | read-only | current | CAM Free L2 lowest section entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.9 | ColumnsnCamStatHostLookupCount | read-only | current | CAM host lookup count for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.10 | ColumnsnCamStatRouteLookupCount | read-only | current | CAM route lookup count for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.11 | ColumnsnCamStatLevel1 | read-only | current | CAM stat level1 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.12 | ColumnsnCamStatLevel2 | read-only | current | CAM stat level2 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.13 | ColumnsnCamStatLevel3 | read-only | current | CAM stat level3 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.14 | ColumnsnCamStatMacFailCount | read-only | current | CAM MAC fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.15 | ColumnsnCamStatIPRouteFailCount | read-only | current | CAM IP route fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.16 | ColumnsnCamStatIPSessionFailCount | read-only | current | CAM IP session fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.17 | ColumnsnCamStatIPMCastFailCount | read-only | current | CAM IP multicast fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.18 | ColumnsnCamStatL2SessionFailCount | read-only | current | CAM L2 session fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.19 | ColumnsnCamStatAddMACCount | read-only | current | CAM add MAC count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.20 | ColumnsnCamStatAddVLANCount | read-only | current | CAM add VLAN count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.21 | ColumnsnCamStatAddIPHostCount | read-only | current | CAM add IP host count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.22 | ColumnsnCamStatAddIPRouteCount | read-only | current | CAM add IP route count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.23 | ColumnsnCamStatAddIPSessionCount | read-only | current | CAM add IP session count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.24 | ColumnsnCamStatAddIPMCastCount | read-only | current | CAM add IP multicast count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.25 | ColumnsnCamStatAddL2SessionCount | read-only | current | CAM add L2 session count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.26 | ColumnsnCamStatAddIPXCount | read-only | current | CAM add IPX count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.27 | ColumnsnCamStatDeleteDMACamCount | read-only | current | CAM delete DMA CAM count. |
| 1.3.6.1.4.1.1991.1.1.2.12.4 | NodesnAgSystemDRAM | |||
| 1.3.6.1.4.1.1991.1.1.2.12.4.1 | ScalarsnAgSystemDRAMUtil | read-only | current | The system dynamic memory utilization, in unit of percentage. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.2 | ScalarsnAgSystemDRAMTotal | read-only | current | The total amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.3 | ScalarsnAgSystemDRAMFree | read-only | current | The free amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.4 | ScalarsnAgSystemDRAMForBGP | read-only | current | The free amount of system dynamic memory used by BGP, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.5 | ScalarsnAgSystemDRAMForOSPF | read-only | current | The free amount of system dynamic memory used by OSPF, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.5 | NodesnAgSystemDebug | |||
| 1.3.6.1.4.1.1991.1.1.2.12.5.1 | ScalarsnAgSystemDebugTotalIn | read-only | current | Total incoming packet count. Sum of Buffer Manager and CPU read count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.2 | ScalarsnAgSystemDebugTotalOut | read-only | current | Total outgoing packet count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.3 | ScalarsnAgSystemDebugCpuQueueRead | read-only | current | CPU Queue read count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.4 | ScalarsnAgSystemDebugDRAMBuffer | read-only | current | DRAM buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.5 | ScalarsnAgSystemDebugBMBuffer | read-only | current | BM buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.6 | ScalarsnAgSystemDebugBMFreeBuffer | read-only | current | BM free buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.7 | ScalarsnAgSystemDebugBMFreeBufferMgmt | read-only | current | BM free buffer management count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.8 | ScalarsnAgSystemDebugIpcGigLock | read-only | current | IPC GIG lock count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.9 | ScalarsnAgSystemDebugDRAMGetError | read-only | current | DRAM get error count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.10 | ScalarsnAgSystemDebugDRAMToBMCopyFail | read-only | current | DRAM to Buffer Manager copy fail count. |
| 1.3.6.1.4.1.1991.1.1.2.13 | NodesnAgentTemp | |||
| 1.3.6.1.4.1.1991.1.1.2.13.1 | TablesnAgentTempTable | not-accessible | current | Table to list temperatures of all the modules in the device. This table is applicable to only those modules with temperature sensors. |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1 | RowsnAgentTempEntry | not-accessible | current | A row in the module temperature table. |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.1 | ColumnsnAgentTempSlotNum | not-accessible | current | The slot number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.2 | ColumnsnAgentTempSensorId | not-accessible | current | The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.3 | ColumnsnAgentTempSensorDescr | read-only | current | Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.4 | ColumnsnAgentTempValue | read-only | current | Temperature of the the sensor represented by this row. Each unit is 0.5 degrees Celcius. |
| 1.3.6.1.4.1.1991.1.1.2.13.2 | TablesnAgentTempThresholdTable | not-accessible | current | Table to list temperature threshold levels for 4 speeds of fan settings. Depending on the temperature level, the fans run at diffrent speeds of RPM. There are … |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1 | RowsnAgentTempThresholdEntry | not-accessible | current | A row in the module temperature threshold table. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.1 | ColumnsnAgentTempThresholdModule | not-accessible | current | The module in the system for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.2 | ColumnsnAgentTempThresholdLevel | not-accessible | current | The temperature threshold level of the module for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.3 | ColumnsnAgentTempThresholdHighValue | read-write | current | The high value for the temperature threshold, above which the fans would need to operate at the next higher speed. If it reaches more than the high threshold v… |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.4 | ColumnsnAgentTempThresholdLowValue | read-write | current | The low value for the temperature threshold, below which the fans would need to operate at the next lower speed. This value is not applicable for the 'low' lev… |
| 1.3.6.1.4.1.1991.1.1.2.13.3 | TablesnAgentTemp2Table | not-accessible | current | Table to list temperatures of the modules in the device for each unit. This table is applicable to only those modules with temperature sensors. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1 | RowsnAgentTemp2Entry | not-accessible | current | A row in the module temperature table. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.1 | ColumnsnAgentTemp2UnitNum | not-accessible | current | The unit number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.2 | ColumnsnAgentTemp2SlotNum | not-accessible | current | The slot number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.3 | ColumnsnAgentTemp2SensorId | not-accessible | current | The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.4 | ColumnsnAgentTemp2SensorDescr | read-only | current | Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.5 | ColumnsnAgentTemp2Value | read-only | current | Temperature of the sensor represented by this row. Each unit is 0.5 degrees Celsius. |
| 1.3.6.1.4.1.1991.1.1.2.14 | NodesnAgentPoe | |||
| 1.3.6.1.4.1.1991.1.1.2.15 | NodesnAgentLicense | |||
| 1.3.6.1.4.1.1991.1.1.2.15.1 | TablefdryLicenseTable | not-accessible | current | A list of licenses maintained by license sub-system. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1 | RowfdryLicenseEntry | not-accessible | current | An entry in a license table. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.1 | ColumnfdryLicensePackageName | not-accessible | current | Name of the package, whose license information, this entry displays. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.2 | ColumnfdryLicenseLid | not-accessible | current | License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.3 | ColumnfdryLicenseHash | not-accessible | current | A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.4 | ColumnfdryLicenseType | read-only | current | The type of the license, which can be either normal or trial. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.5 | ColumnfdryLicensePrecedence | read-only | current | Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, wh… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.6 | ColumnfdryLicenseTrialDays | read-only | current | The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.7 | ColumnfdryLicenseTrialTimeElapsed | read-only | current | The cumulative number of hours used for this trial license. This counts all the usages of the trial license. For a normal license, this is 0. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.8 | ColumnfdryLicenseTrialTimeLeft | read-only | current | The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours used. For a normal license, t… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.9 | ColumnfdryLicenseTrialState | read-only | current | This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is never used, avtive means it has… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.10 | ColumnfdryLicenseVendorInfo | read-only | current | This is the Ruckus Wireless specific package data which is an octet string. This contains encoded information of license specific information such as package b… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.11 | ColumnfdryLicenseSlot | read-only | current | This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID … |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.12 | ColumnfdryLicenseMode | read-only | current | The mode of the license, which can be either node locked or non-node locked mode. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.13 | ColumnfdryLicenseSerialNumber | read-only | current | This is the serial number of the license. This is only for the non-node locked license |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.14 | ColumnfdryLicenseCapacity | read-only | current | The capacity of the license. For POD license, this is the number of ports. For premium or advance license, it is 1 |
| 1.3.6.1.4.1.1991.1.1.2.15.3 | TablebrcdPortLicenseTable | not-accessible | current | A list of ports which require the port license. |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1 | RowbrcdPortLicenseEntry | not-accessible | current | An entry in a licensed port table. |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1.1 | ColumnbrcdPortLicenseIndex | not-accessible | current | The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1.2 | ColumnbrcdPortLicenseStatus | read-only | current | The current license state of the port. validLic(1) ............ the port requires port license, and has valid license noLic(2) ........... the port requires po… |
| 1.3.6.1.4.1.1991.1.1.2.15.4 | TablesnSAULicenseUnitTable | not-accessible | current | A list of SAU licenses maintained by each unit. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1 | RowsnSAULicenseUnitEntry | not-accessible | current | An entry in SAU license table. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.1 | ColumnsnSAULicenseUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.2 | ColumnsnSAULicensePackageName | read-only | current | Name of the license package. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.3 | ColumnsnSAUIsPremLicensePresent | read-only | current | The present state of L3 premium license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.4 | ColumnsnSAUIsPoDLicensePresent | read-only | current | The present state of PoD license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.5 | ColumnsnSAUPoDLicensedSpeed | read-only | current | The port speed of PoD license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.6 | ColumnsnSAUPoDLicensedPorts | read-only | current | The number of licensed ports. The capacity of PoD License. Zero means no PoD license or the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.7 | ColumnsnSAUIsMACSecLicensePresent | read-only | current | The present state of MACSec license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.8 | ColumnsnSAUPremSerialNumber | read-only | current | This is the serial number of CoE L3 premium license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.9 | ColumnsnSAUPoDSerialNumber | read-only | current | This is the serial number of CoE PoD license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.10 | ColumnsnSAUMACsecSerialNumber | read-only | current | This is the serial number of CoE MACsec license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.11 | ColumnsnSAUICX7150SerialNumber | read-only | current | This is the serial number of CoE ICX7150 license. FOR ICX7150 platform, only one SAU license option can be installed. e.g. 4x10gr, It is combination of l3 prem… |
| 1.3.6.1.4.1.1991.1.1.5.1 | NodesnStackGen | |||
| 1.3.6.1.4.1.1991.1.1.5.1.1 | ScalarsnStackPriSwitchMode | read-write | current | The Stackable Management Primary Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........primary switch enabled disabled(… |
| 1.3.6.1.4.1.1991.1.1.5.1.2 | ScalarsnStackMaxSecSwitch | read-only | current | The Maximum Secondary Switches are allowed in the Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.1.3 | ScalarsnStackTotalSecSwitch | read-only | current | The Total Secondary Switches currently connected to the Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.1.4 | ScalarsnStackSyncAllSecSwitch | read-write | current | Synchronize all the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).… |
| 1.3.6.1.4.1.1991.1.1.5.1.5 | ScalarsnStackSmSlotIndex | read-write | current | The Slot 0 is the Master slot and Slot 1-8 are slaves. All the slot-based MIB data can be retrieved with respect to this slot index such as snChassis global MI… |
| 1.3.6.1.4.1.1991.1.1.5.1.6 | ScalarsnStackFmpSetProcess | read-only | current | normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state. pending(1) - The pending process is waiting for the result of an FMP-SET. fail… |
| 1.3.6.1.4.1.1991.1.1.5.2 | NodesnStackSecSwitchInfo | |||
| 1.3.6.1.4.1.1991.1.1.5.2.1 | TablesnStackSecSwitchTable | not-accessible | current | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1 | RowsnStackSecSwitchEntry | not-accessible | current | An entry in the Stackable Management Secondary Switch Information table. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.1 | ColumnsnStackSecSwitchIndex | read-only | current | The secondary switch index must not be greater than the snStackMaxSecSwitch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.2 | ColumnsnStackSecSwitchSlotId | read-write | current | The secondary switch slot ID must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.3 | ColumnsnStackSecSwitchPortCnts | read-only | current | The number of ports in this secondary switch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.4 | ColumnsnStackSecSwitchEnabled | read-write | current | The secondary switch has been selected to Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.5 | ColumnsnStackSecSwitchAck | read-only | current | The secondary switch has sent reponse to the primary switch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.6 | ColumnsnStackSecSwitchMacAddr | read-only | current | The secondary switch physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.7 | ColumnsnStackSecSwitchSyncCmd | read-write | current | Synchronize the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).....… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.8 | ColumnsnStackSecSwitchIpAddr | read-write | current | The secondary switch IP Address and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.9 | ColumnsnStackSecSwitchSubnetMask | read-write | current | The secondary switch IP Subnet Mask and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.10 | ColumnsnStackSecSwitchCfgCmd | read-write | current | snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | current | This data type is used to model textual information taken from the NVT ASCII character set. By convention, objects with this syntax are declared as having SIZE (0..255) |
| MacAddress | OCTET STRING (SIZE(6)) | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |