FOUNDRY-SN-BGP4-GROUP-MIB
284 objects
Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| FOUNDRY-SN-ROOT-MIB | router |
| INET-ADDRESS-MIB | InetAutonomousSystemNumber |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.11 | IdentitysnBgp4 | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.11.1 | NodesnBgp4Gen | |||
| 1.3.6.1.4.1.1991.1.2.11.1.1 | ScalarsnBgp4GenAlwaysCompareMed | read-write | current | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
| 1.3.6.1.4.1.1991.1.2.11.1.2 | ScalarsnBgp4GenAutoSummary | read-write | current | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.3 | ScalarsnBgp4GenDefaultLocalPreference | read-write | deprecated | To set the default local preference attribute.This is deprecated and snBgp4GenDefaultLocalPreference1 is introduced. |
| 1.3.6.1.4.1.1991.1.2.11.1.4 | ScalarsnBgp4GenDefaultInfoOriginate | read-write | current | To enable/disable the default Information Originate. |
| 1.3.6.1.4.1.1991.1.2.11.1.5 | ScalarsnBgp4GenFastExternalFallover | read-write | current | To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. |
| 1.3.6.1.4.1.1991.1.2.11.1.6 | ScalarsnBgp4GenNextBootNeighbors | read-write | current | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBg… |
| 1.3.6.1.4.1.1991.1.2.11.1.7 | ScalarsnBgp4GenNextBootRoutes | read-write | current | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. |
| 1.3.6.1.4.1.1991.1.2.11.1.8 | ScalarsnBgp4GenSynchronization | read-write | current | To enable/disable the synchronization between BGP and your IGP. |
| 1.3.6.1.4.1.1991.1.2.11.1.9 | ScalarsnBgp4GenKeepAliveTime | read-write | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.10 | ScalarsnBgp4GenHoldTime | read-write | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.11 | ScalarsnBgp4GenRouterId | read-write | current | BGP Router Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.12 | ScalarsnBgp4GenTableMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.1.13 | ScalarsnBgp4GenAdminStat | read-write | current | The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing o… |
| 1.3.6.1.4.1.1991.1.2.11.1.14 | ScalarsnBgp4GenDefaultMetric | read-write | deprecated | To set default metric values for the BGP4 protocol.This is deprecated and snBgp4GenDefaultMetric1 is introduced. |
| 1.3.6.1.4.1.1991.1.2.11.1.15 | ScalarsnBgp4GenMaxNeighbors | read-only | current | The maximum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.16 | ScalarsnBgp4GenMinNeighbors | read-only | current | The minimum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.17 | ScalarsnBgp4GenMaxRoutes | read-only | current | The maximum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.18 | ScalarsnBgp4GenMinRoutes | read-only | current | The minimum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.19 | ScalarsnBgp4GenMaxAddrFilters | read-only | current | The maximum configured number of BGP4 address filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.20 | ScalarsnBgp4GenMaxAggregateAddresses | read-only | current | The maximum configured number of BGP4 aggregate addresses. |
| 1.3.6.1.4.1.1991.1.2.11.1.21 | ScalarsnBgp4GenMaxAsPathFilters | read-only | current | The maximum configured number of BGP4 AS-PATH filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.22 | ScalarsnBgp4GenMaxCommunityFilters | read-only | current | The maximum configured number of BGP4 Community filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.23 | ScalarsnBgp4GenMaxNetworks | read-only | current | The maximum configured number of BGP4 Networks. |
| 1.3.6.1.4.1.1991.1.2.11.1.24 | ScalarsnBgp4GenMaxRouteMapFilters | read-only | current | The maximum configured number of BGP4 Route-map Filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.25 | ScalarsnBgp4GenNeighPrefixMinValue | read-only | current | The minimum configured value of BGP4 Neighbor Prefix. |
| 1.3.6.1.4.1.1991.1.2.11.1.26 | ScalarsnBgp4GenOperNeighbors | read-only | current | The current operational max number of neighbors configured for a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.27 | ScalarsnBgp4GenOperRoutes | read-only | current | The current operational number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.28 | ScalarsnBgp4GenLocalAs | read-write | current | Bgp4 local autonomous system number. |
| 1.3.6.1.4.1.1991.1.2.11.1.29 | ScalarsnBgp4GenRoutesInstalled | read-only | current | Bgp4 installed routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.30 | ScalarsnBgp4GenAsPathInstalled | read-only | current | Bgp4 installed autonomous system path. |
| 1.3.6.1.4.1.1991.1.2.11.1.31 | ScalarsnBgp4ExternalDistance | read-write | current | Administrative distance for BGP external routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.32 | ScalarsnBgp4InternalDistance | read-write | current | Administrative distance for BGP internal routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.33 | ScalarsnBgp4LocalDistance | read-write | current | Administrative distance for BGP local routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.34 | ScalarsnBgp4OperNumOfAttributes | read-only | current | The operational number of attribute entries. |
| 1.3.6.1.4.1.1991.1.2.11.1.35 | ScalarsnBgp4NextBootMaxAttributes | read-write | current | The next boot maximum attribute entries. 10000 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.36 | ScalarsnBgp4ClusterId | read-write | current | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.37 | ScalarsnBgp4ClientToClientReflection | read-write | current | To enable/disable the client to client reflection in BGP4. |
| 1.3.6.1.4.1.1991.1.2.11.1.38 | ScalarsnBgp4GenTotalNeighbors | read-only | current | The current total number of neighbors running in a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.39 | ScalarsnBgp4GenMaxPaths | read-write | current | The maximum configured number of Paths. |
| 1.3.6.1.4.1.1991.1.2.11.1.40 | ScalarsnBgp4GenConfedId | read-write | current | Bgp4 Confederation Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.41 | ScalarsnBgp4GenConfedPeers | read-write | current | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.1.42 | ScalarsnBgp4GenDampening | read-write | current | The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes … |
| 1.3.6.1.4.1.1991.1.2.11.1.43 | ScalarsnBgp4GenDampenHalfLife | read-write | current | Bgp4 Dampening Half Life. |
| 1.3.6.1.4.1.1991.1.2.11.1.44 | ScalarsnBgp4GenDampenReuse | read-write | current | Bgp4 Dampening Reuse. |
| 1.3.6.1.4.1.1991.1.2.11.1.45 | ScalarsnBgp4GenDampenSuppress | read-write | current | Bgp4 Dampening Suppress. |
| 1.3.6.1.4.1.1991.1.2.11.1.46 | ScalarsnBgp4GenDampenMaxSuppress | read-write | current | Bgp4 Dampening Max Suppress Time. |
| 1.3.6.1.4.1.1991.1.2.11.1.47 | ScalarsnBgp4GenDampenMap | read-write | current | An octet string of the route-map name for dampening, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.1.48 | ScalarsnBgp4GenLocalAs4 | read-write | current | BGP4 local autonomous system (AS) number to support 4 byte AS format. |
| 1.3.6.1.4.1.1991.1.2.11.1.49 | ScalarsnBgp4GenDefaultMetric1 | read-write | current | To set default metric values for the BGP4 protocol. |
| 1.3.6.1.4.1.1991.1.2.11.1.50 | ScalarsnBgp4GenDefaultLocalPreference1 | read-write | current | To set the default local preference attribute. |
| 1.3.6.1.4.1.1991.1.2.11.2 | NodesnBgp4AddrFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.2.1 | TablesnBgp4AddrFilterTable | not-accessible | current | Bgp4 Address Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1 | RowsnBgp4AddrFilterEntry | not-accessible | current | An entry in the Bgp4 Address Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.1 | ColumnsnBgp4AddrFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.2 | ColumnsnBgp4AddrFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.3 | ColumnsnBgp4AddrFilterSourceIp | read-write | current | Source IP address. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.4 | ColumnsnBgp4AddrFilterSourceMask | read-write | current | Source IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.5 | ColumnsnBgp4AddrFilterDestIp | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.6 | ColumnsnBgp4AddrFilterDestMask | read-write | current | Destination IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.7 | ColumnsnBgp4AddrFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.3 | NodesnBgp4AggregateAddr | |||
| 1.3.6.1.4.1.1991.1.2.11.3.1 | TablesnBgp4AggregateAddrTable | not-accessible | current | Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1 | RowsnBgp4AggregateAddrEntry | not-accessible | current | An entry in the Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.1 | ColumnsnBgp4AggregateAddrIp | read-only | current | Aggregate Address IP address. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.2 | ColumnsnBgp4AggregateAddrMask | read-only | current | Aggregate Address IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.3 | ColumnsnBgp4AggregateAddrOption | read-only | current | address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.4 | ColumnsnBgp4AggregateAddrMap | read-write | current | This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only tw… |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.5 | ColumnsnBgp4AggregateAddrRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.4 | NodesnBgp4AsPathFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.4.1 | TablesnBgp4AsPathFilterTable | not-accessible | current | Bgp4 AS-Path Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1 | RowsnBgp4AsPathFilterEntry | not-accessible | current | An entry in the Bgp4 As-path Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.1 | ColumnsnBgp4AsPathFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.2 | ColumnsnBgp4AsPathFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.3 | ColumnsnBgp4AsPathFilterRegExpression | read-write | current | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.4 | ColumnsnBgp4AsPathFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.5 | NodesnBgp4CommunityFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.5.1 | TablesnBgp4CommunityFilterTable | not-accessible | current | Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1 | RowsnBgp4CommunityFilterEntry | not-accessible | current | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.1 | ColumnsnBgp4CommunityFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.2 | ColumnsnBgp4CommunityFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.3 | ColumnsnBgp4CommunityFilterCommNum | read-write | current | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.4 | ColumnsnBgp4CommunityFilterInternet | read-write | current | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.5 | ColumnsnBgp4CommunityFilterNoAdvertise | read-write | current | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.6 | ColumnsnBgp4CommunityFilterNoExport | read-write | current | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.7 | ColumnsnBgp4CommunityFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.8 | ColumnsnBgp4CommunityFilterLocalAs | read-write | current | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.1991.1.2.11.6 | NodesnBgp4NeighGenCfg | |||
| 1.3.6.1.4.1.1991.1.2.11.6.1 | TablesnBgp4NeighGenCfgTable | not-accessible | current | Bgp4 Neighbor General Configuration table. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1 | RowsnBgp4NeighGenCfgEntry | not-accessible | current | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.1 | ColumnsnBgp4NeighGenCfgNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.2 | ColumnsnBgp4NeighGenCfgAdvertlevel | read-write | current | To set the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.3 | ColumnsnBgp4NeighGenCfgDefOriginate | read-write | current | To enable/disable the default originate for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.4 | ColumnsnBgp4NeighGenCfgEbgpMultihop | read-write | current | To enable/disable the EBGP Muitihop for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.5 | ColumnsnBgp4NeighGenCfgMaxPrefix | read-write | current | To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.6 | ColumnsnBgp4NeighGenCfgNextHopSelf | read-write | current | To enable/disable the next-hop processing of BGP updates on the router. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.7 | ColumnsnBgp4NeighGenCfgRemoteAs | read-write | current | To specify a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.8 | ColumnsnBgp4NeighGenCfgSendComm | read-write | current | To specify that a COMMUNITES attribute should be sent to a BGP neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.9 | ColumnsnBgp4NeighGenCfgWeight | read-write | current | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.10 | ColumnsnBgp4NeighGenCfgWeightFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.11 | ColumnsnBgp4NeighGenCfgRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.12 | ColumnsnBgp4NeighGenCfgUpdateSrcLpbIntf | read-write | current | To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment t… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.13 | ColumnsnBgp4NeighGenCfgRouteRefClient | read-write | current | To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.14 | ColumnsnBgp4NeighGenCfgRemovePrivateAs | read-write | current | To enable/disable filtering private AS number. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.15 | ColumnsnBgp4NeighGenCfgEbgpMultihopTtl | read-write | current | The EBGP Muitihop TTL for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.16 | ColumnsnBgp4NeighGenCfgShutdown | read-write | current | To enable/disable BGP4 Nbr Shutdown. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.17 | ColumnsnBgp4NeighGenCfgKeepAliveTime | read-write | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.18 | ColumnsnBgp4NeighGenCfgHoldTime | read-write | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.19 | ColumnsnBgp4NeighGenCfgDefOrigMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.20 | ColumnsnBgp4NeighGenCfgDesc | read-write | current | An octet string of the neighbor description. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.21 | ColumnsnBgp4NeighGenCfgPass | read-write | current | An octet string of the neighbor Md5 password. |
| 1.3.6.1.4.1.1991.1.2.11.7 | NodesnBgp4NeighDistGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.7.1 | TablesnBgp4NeighDistGroupTable | not-accessible | current | Bgp4 Neighbor Distribute Group table. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1 | RowsnBgp4NeighDistGroupEntry | not-accessible | current | An entry in the Bgp4 Distribute Group table. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.1 | ColumnsnBgp4NeighDistGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.2 | ColumnsnBgp4NeighDistGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.3 | ColumnsnBgp4NeighDistGroupAccessList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.4 | ColumnsnBgp4NeighDistGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.5 | ColumnsnBgp4NeighDistGroupInFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.6 | ColumnsnBgp4NeighDistGroupOutFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.7 | ColumnsnBgp4NeighDistGroupInIpAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.8 | ColumnsnBgp4NeighDistGroupOutIpAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.9 | ColumnsnBgp4NeighDistGroupInPrefixList | read-write | current | A Prefix name list. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.10 | ColumnsnBgp4NeighDistGroupOutPrefixList | read-write | current | A Prefix name list. |
| 1.3.6.1.4.1.1991.1.2.11.8 | NodesnBgp4NeighFilterGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.8.1 | TablesnBgp4NeighFilterGroupTable | not-accessible | current | Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1 | RowsnBgp4NeighFilterGroupEntry | not-accessible | current | An entry in the Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.1 | ColumnsnBgp4NeighFilterGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.2 | ColumnsnBgp4NeighFilterGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.3 | ColumnsnBgp4NeighFilterGroupAccessList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.4 | ColumnsnBgp4NeighFilterGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.5 | ColumnsnBgp4NeighFilterGroupInFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.6 | ColumnsnBgp4NeighFilterGroupOutFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.7 | ColumnsnBgp4NeighFilterGroupInAsPathAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.8 | ColumnsnBgp4NeighFilterGroupOutAsPathAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.9 | ColumnsnBgp4NeighFilterGroupWeight | read-write | current | To assign a weight to a neighbor filter. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.10 | ColumnsnBgp4NeighFilterGroupWeightAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.9 | NodesnBgp4NeighRouteMap | |||
| 1.3.6.1.4.1.1991.1.2.11.9.1 | TablesnBgp4NeighRouteMapTable | not-accessible | current | Bgp4 Neighbor Route Map table. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1 | RowsnBgp4NeighRouteMapEntry | not-accessible | current | An entry in the Bgp4 Route Map table. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.1 | ColumnsnBgp4NeighRouteMapNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.2 | ColumnsnBgp4NeighRouteMapDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.3 | ColumnsnBgp4NeighRouteMapMapName | read-write | current | An octet string of the route-map name, Each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.4 | ColumnsnBgp4NeighRouteMapRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.10 | NodesnBgp4Network | |||
| 1.3.6.1.4.1.1991.1.2.11.10.1 | TablesnBgp4NetworkTable | not-accessible | current | Bgp4 Network Weight table. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1 | RowsnBgp4NetworkEntry | not-accessible | current | An entry in the Bgp4 Network Weight table. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.1 | ColumnsnBgp4NetworkIp | read-only | current | The IP Address for a network entry. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.2 | ColumnsnBgp4NetworkSubnetMask | read-only | current | The subnet mask for a network entry. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.3 | ColumnsnBgp4NetworkWeight | read-write | current | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.4 | ColumnsnBgp4NetworkBackdoor | read-write | current | To enable/disable the backdoor for this network. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.5 | ColumnsnBgp4NetworkRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.11 | NodesnBgp4Redis | |||
| 1.3.6.1.4.1.1991.1.2.11.11.1 | TablesnBgp4RedisTable | not-accessible | current | The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1 | RowsnBgp4RedisEntry | not-accessible | current | The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.1 | ColumnsnBgp4RedisProtocol | read-only | current | The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the conne… |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.2 | ColumnsnBgp4RedisMetric | read-write | current | The metric of using the specified protocol Metric value. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.3 | ColumnsnBgp4RedisRouteMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.4 | ColumnsnBgp4RedisWeight | read-write | current | To assign a weight for the specified protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.5 | ColumnsnBgp4RedisMatchInternal | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.6 | ColumnsnBgp4RedisMatchExternal1 | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.7 | ColumnsnBgp4RedisMatchExternal2 | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.8 | ColumnsnBgp4RedisRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.12 | NodesnBgp4RouteMapFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.12.1 | TablesnBgp4RouteMapFilterTable | not-accessible | current | Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1 | RowsnBgp4RouteMapFilterEntry | not-accessible | current | An entry in the Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.1 | ColumnsnBgp4RouteMapFilterMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.2 | ColumnsnBgp4RouteMapFilterSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.3 | ColumnsnBgp4RouteMapFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.4 | ColumnsnBgp4RouteMapFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.13 | NodesnBgp4RouteMapMatch | |||
| 1.3.6.1.4.1.1991.1.2.11.13.1 | TablesnBgp4RouteMapMatchTable | not-accessible | current | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1 | RowsnBgp4RouteMapMatchEntry | not-accessible | current | An entry in the Bgp4 Route Map Match table. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.1 | ColumnsnBgp4RouteMapMatchMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.2 | ColumnsnBgp4RouteMapMatchSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.3 | ColumnsnBgp4RouteMapMatchAsPathFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.4 | ColumnsnBgp4RouteMapMatchCommunityFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.5 | ColumnsnBgp4RouteMapMatchAddressFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.6 | ColumnsnBgp4RouteMapMatchMetric | read-write | current | To match a metric for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.7 | ColumnsnBgp4RouteMapMatchNextHopList | read-write | current | A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.8 | ColumnsnBgp4RouteMapMatchRouteType | read-write | current | To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.9 | ColumnsnBgp4RouteMapMatchTagList | read-write | current | To match a BGP tag access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.10 | ColumnsnBgp4RouteMapMatchRowMask | read-write | current | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchE… |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.11 | ColumnsnBgp4RouteMapMatchAsPathAccessList | read-write | current | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.12 | ColumnsnBgp4RouteMapMatchCommunityList | read-write | current | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.13 | ColumnsnBgp4RouteMapMatchAddressAccessList | read-write | current | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.14 | ColumnsnBgp4RouteMapMatchAddressPrefixList | read-write | current | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.15 | ColumnsnBgp4RouteMapMatchNextHopAccessList | read-write | current | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.16 | ColumnsnBgp4RouteMapMatchNextHopPrefixList | read-write | current | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.14 | NodesnBgp4RouteMapSet | |||
| 1.3.6.1.4.1.1991.1.2.11.14.1 | TablesnBgp4RouteMapSetTable | not-accessible | current | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1 | RowsnBgp4RouteMapSetEntry | not-accessible | current | An entry in the Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.1 | ColumnsnBgp4RouteMapSetMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.2 | ColumnsnBgp4RouteMapSetSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.3 | ColumnsnBgp4RouteMapSetAsPathType | read-write | current | To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from s… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.4 | ColumnsnBgp4RouteMapSetAsPathString | read-write | current | as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.5 | ColumnsnBgp4RouteMapSetAutoTag | read-write | current | To enable/disable the automatic-tag for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.6 | ColumnsnBgp4RouteMapSetCommunityType | read-write | current | To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 a… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.7 | ColumnsnBgp4RouteMapSetCommunityNum | read-write | deprecated | community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.8 | ColumnsnBgp4RouteMapSetCommunityAdditive | read-write | current | To add the community to the already existing communities. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.9 | ColumnsnBgp4RouteMapSetLocalPreference | read-write | current | To modify a local-preference for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.10 | ColumnsnBgp4RouteMapSetMetric | read-write | current | To modify a metric for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.11 | ColumnsnBgp4RouteMapSetNextHop | read-write | current | To modify the IP address of the next hop for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.12 | ColumnsnBgp4RouteMapSetOrigin | read-write | current | To set the BGP origin code. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.13 | ColumnsnBgp4RouteMapSetTag | read-write | current | To specify the tag for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.14 | ColumnsnBgp4RouteMapSetWeight | read-write | current | To specify the BGP weight for the routing table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.15 | ColumnsnBgp4RouteMapSetRowMask | read-write | current | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEnt… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.16 | ColumnsnBgp4RouteMapSetCommunityNums | read-write | current | Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.17 | ColumnsnBgp4RouteMapSetDampenHalfLife | read-write | current | Bgp4 Route Map Dampening Half Life. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.18 | ColumnsnBgp4RouteMapSetDampenReuse | read-write | current | Bgp4 Route Map Dampening Reuse. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.19 | ColumnsnBgp4RouteMapSetDampenSuppress | read-write | current | Bgp4 Route Map Dampening Suppress. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.20 | ColumnsnBgp4RouteMapSetDampenMaxSuppress | read-write | current | Bgp4 Route Map Dampening Max Suppress Time. |
| 1.3.6.1.4.1.1991.1.2.11.15 | NodesnBgp4NeighOperStatus | |||
| 1.3.6.1.4.1.1991.1.2.11.15.1 | TablesnBgp4NeighOperStatusTable | not-accessible | current | Bgp4 Neighbor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1 | RowsnBgp4NeighOperStatusEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.1 | ColumnsnBgp4NeighOperStatusIndex | read-only | current | The index for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.2 | ColumnsnBgp4NeighOperStatusIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.3 | ColumnsnBgp4NeighOperStatusRemoteAs | read-only | current | To show a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.4 | ColumnsnBgp4NeighOperStatusBgpType | read-only | current | To show the type of BGP protocol whether is internal or external. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.5 | ColumnsnBgp4NeighOperStatusState | read-only | current | To show the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.6 | ColumnsnBgp4NeighOperStatusKeepAliveTime | read-only | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.7 | ColumnsnBgp4NeighOperStatusHoldTime | read-only | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.8 | ColumnsnBgp4NeighOperStatusAdvertlevel | read-only | current | To show the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.9 | ColumnsnBgp4NeighOperStatusKeepAliveTxCounts | read-only | current | Keep alive message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.10 | ColumnsnBgp4NeighOperStatusKeepAliveRxCounts | read-only | current | Keep alive message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.11 | ColumnsnBgp4NeighOperStatusUpdateTxCounts | read-only | current | Update message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.12 | ColumnsnBgp4NeighOperStatusUpdateRxCounts | read-only | current | Update message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.13 | ColumnsnBgp4NeighOperStatusNotifTxCounts | read-only | current | Notification message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.14 | ColumnsnBgp4NeighOperStatusNotifRxCounts | read-only | current | Notification message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.15 | ColumnsnBgp4NeighOperStatusOpenTxCounts | read-only | current | Open message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.16 | ColumnsnBgp4NeighOperStatusOpenRxCounts | read-only | current | Open message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.16 | NodesnBgp4RouteOperStatus | |||
| 1.3.6.1.4.1.1991.1.2.11.16.1 | TablesnBgp4RouteOperStatusTable | not-accessible | current | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1 | RowsnBgp4RouteOperStatusEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.1 | ColumnsnBgp4RouteOperStatusIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.2 | ColumnsnBgp4RouteOperStatusIp | read-only | current | The IP Address for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.3 | ColumnsnBgp4RouteOperStatusSubnetMask | read-only | current | The IP Subnet Mask for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.4 | ColumnsnBgp4RouteOperStatusNextHop | read-only | current | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.5 | ColumnsnBgp4RouteOperStatusMetric | read-only | current | To show the metric value of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.6 | ColumnsnBgp4RouteOperStatusLocalPreference | read-only | current | To show the local preference of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.7 | ColumnsnBgp4RouteOperStatusWeight | read-only | current | To show the weight of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.8 | ColumnsnBgp4RouteOperStatusOrigin | read-only | current | To show the origin of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.9 | ColumnsnBgp4RouteOperStatusStatus | read-only | current | A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant b… |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.10 | ColumnsnBgp4RouteOperStatusRouteTag | read-only | current | To show the route tag of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.11 | ColumnsnBgp4RouteOperStatusCommunityList | read-only | current | To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to … |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.12 | ColumnsnBgp4RouteOperStatusAsPathList | read-only | current | To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.17 | NodesnBgp4NeighborSummary | |||
| 1.3.6.1.4.1.1991.1.2.11.17.1 | TablesnBgp4NeighborSummaryTable | not-accessible | current | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1 | RowsnBgp4NeighborSummaryEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.1 | ColumnsnBgp4NeighborSummaryIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.2 | ColumnsnBgp4NeighborSummaryIp | read-only | current | The IP Address for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.3 | ColumnsnBgp4NeighborSummaryState | read-only | current | To show the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.4 | ColumnsnBgp4NeighborSummaryStateChgTime | read-only | current | The time of a change of the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.5 | ColumnsnBgp4NeighborSummaryRouteReceived | read-only | current | The number of routes received of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.6 | ColumnsnBgp4NeighborSummaryRouteInstalled | read-only | current | The number of routes installed of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.18 | NodesnBgp4Attribute | |||
| 1.3.6.1.4.1.1991.1.2.11.18.1 | TablesnBgp4AttributeTable | not-accessible | current | Bgp4 Attribute entries table. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1 | RowsnBgp4AttributeEntry | not-accessible | current | An entry in the Bgp4 Attribute table. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.1 | ColumnsnBgp4AttributeIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.2 | ColumnsnBgp4AttributeNextHop | read-only | current | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.3 | ColumnsnBgp4AttributeMetric | read-only | current | To show the metric value of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.4 | ColumnsnBgp4AttributeOrigin | read-only | current | To show the origin of this route. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.5 | ColumnsnBgp4AttributeAggregatorAs | read-only | current | The aggregator AS number for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.6 | ColumnsnBgp4AttributeRouterId | read-only | current | The router ID for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.7 | ColumnsnBgp4AttributeAtomicAggregatePresent | read-only | current | The atomic aggregate present in an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.8 | ColumnsnBgp4AttributeLocalPreference | read-only | current | To show the local preference of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.9 | ColumnsnBgp4AttributeCommunityList | read-only | current | To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number … |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.10 | ColumnsnBgp4AttributeAsPathList | read-only | current | To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.11 | ColumnsnBgp4AttributeOriginator | read-only | current | The originator IP address for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.12 | ColumnsnBgp4AttributeClusterList | read-only | current | To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID w… |
| 1.3.6.1.4.1.1991.1.2.11.19 | NodesnBgp4ClearNeighborCmd | |||
| 1.3.6.1.4.1.1991.1.2.11.19.1 | TablesnBgp4ClearNeighborCmdTable | not-accessible | current | Clear Bgp4 command table. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1 | RowsnBgp4ClearNeighborCmdEntry | not-accessible | current | An entry in the clear Bgp4 neighbor command table. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1.1 | ColumnsnBgp4ClearNeighborCmdIp | read-only | current | The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1.2 | ColumnsnBgp4ClearNeighborCmdElement | read-write | current | To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. |
| 1.3.6.1.4.1.1991.1.2.11.20 | NodesnBgp4NeighPrefixGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.20.1 | TablesnBgp4NeighPrefixGroupTable | not-accessible | current | Bgp4 Neighbor Prefix Group table. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1 | RowsnBgp4NeighPrefixGroupEntry | not-accessible | current | An entry in the Bgp4 Prefix Group table. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.1 | ColumnsnBgp4NeighPrefixGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.2 | ColumnsnBgp4NeighPrefixGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.3 | ColumnsnBgp4NeighPrefixGroupInAccessList | read-write | current | An in access prefix list name. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.4 | ColumnsnBgp4NeighPrefixGroupOutAccessList | read-write | current | An out prefix list name. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.5 | ColumnsnBgp4NeighPrefixGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |