FOUNDRY-SN-IP-VRRP-MIB
91 objects
Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| FOUNDRY-SN-ROOT-MIB | router |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.12 | IdentitysnVrrp | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.12.1 | NodesnVrrpGlobal | |||
| 1.3.6.1.4.1.1991.1.2.12.1.1 | ScalarsnVrrpGroupOperMode | read-write | current | The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activ… |
| 1.3.6.1.4.1.1991.1.2.12.1.2 | ScalarsnVrrpIfStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps. |
| 1.3.6.1.4.1.1991.1.2.12.1.3 | ScalarsnVrrpIfMaxNumVridPerIntf | read-only | current | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.1991.1.2.12.1.4 | ScalarsnVrrpIfMaxNumVridPerSystem | read-only | current | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.1991.1.2.12.1.5 | ScalarsnVrrpClearVrrpStat | read-write | current | Clear VRRP statistics command. |
| 1.3.6.1.4.1.1991.1.2.12.1.6 | ScalarsnVrrpGroupOperModeVrrpextended | read-write | current | The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(… |
| 1.3.6.1.4.1.1991.1.2.12.2 | NodesnVrrpIntf | |||
| 1.3.6.1.4.1.1991.1.2.12.2.1 | TablesnVrrpIfTable | not-accessible | deprecated | The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1 | RowsnVrrpIfEntry | not-accessible | deprecated | The VRRP Interface Entry describes one interface from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.1 | ColumnsnVrrpIfPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.2 | ColumnsnVrrpIfAuthType | read-write | deprecated | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.3 | ColumnsnVrrpIfAuthPassword | read-write | deprecated | The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.4 | ColumnsnVrrpIfRxHeaderErrCnts | read-only | deprecated | The received Header error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.5 | ColumnsnVrrpIfRxAuthTypeErrCnts | read-only | deprecated | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.6 | ColumnsnVrrpIfRxAuthPwdMismatchErrCnts | read-only | deprecated | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.7 | ColumnsnVrrpIfRxVridErrCnts | read-only | deprecated | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.3 | NodesnVrrpVirRtr | |||
| 1.3.6.1.4.1.1991.1.2.12.3.1 | TablesnVrrpVirRtrTable | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1 | RowsnVrrpVirRtrEntry | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.1 | ColumnsnVrrpVirRtrPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.2 | ColumnsnVrrpVirRtrId | read-only | deprecated | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.3 | ColumnsnVrrpVirRtrOwnership | read-write | deprecated | The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.4 | ColumnsnVrrpVirRtrCfgPriority | read-write | deprecated | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.5 | ColumnsnVrrpVirRtrTrackPriority | read-write | deprecated | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.6 | ColumnsnVrrpVirRtrCurrPriority | read-only | deprecated | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.7 | ColumnsnVrrpVirRtrHelloInt | read-write | deprecated | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.8 | ColumnsnVrrpVirRtrDeadInt | read-write | deprecated | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.9 | ColumnsnVrrpVirRtrPreemptMode | read-write | deprecated | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.10 | ColumnsnVrrpVirRtrState | read-only | deprecated | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.11 | ColumnsnVrrpVirRtrActivate | read-write | deprecated | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.12 | ColumnsnVrrpVirRtrIpAddrMask | read-write | deprecated | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.13 | ColumnsnVrrpVirRtrTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this objec… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.14 | ColumnsnVrrpVirRtrTrackVifMask | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this o… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.15 | ColumnsnVrrpVirRtrRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.16 | ColumnsnVrrpVirRtrRxArpPktDropCnts | read-only | deprecated | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.17 | ColumnsnVrrpVirRtrRxIpPktDropCnts | read-only | deprecated | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.18 | ColumnsnVrrpVirRtrRxPortMismatchCnts | read-only | deprecated | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.19 | ColumnsnVrrpVirRtrRxNumOfIpMismatchCnts | read-only | deprecated | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.20 | ColumnsnVrrpVirRtrRxIpMismatchCnts | read-only | deprecated | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.21 | ColumnsnVrrpVirRtrRxHelloIntMismatchCnts | read-only | deprecated | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.22 | ColumnsnVrrpVirRtrRxPriorityZeroFromMasterCnts | read-only | deprecated | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.23 | ColumnsnVrrpVirRtrRxHigherPriorityCnts | read-only | deprecated | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.24 | ColumnsnVrrpVirRtrTransToMasterStateCnts | read-only | deprecated | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.25 | ColumnsnVrrpVirRtrTransToBackupStateCnts | read-only | deprecated | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.26 | ColumnsnVrrpVirRtrCurrDeadInt | read-only | deprecated | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.27 | ColumnsnVrrpVirRtrTrackPortList | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the s… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.28 | ColumnsnVrrpVirRtrTrackVifPortList | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default va… |
| 1.3.6.1.4.1.1991.1.2.12.4 | NodesnVrrpIntf2 | |||
| 1.3.6.1.4.1.1991.1.2.12.4.1 | TablesnVrrpIf2Table | not-accessible | current | The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1 | RowsnVrrpIf2Entry | not-accessible | current | The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.1 | ColumnsnVrrpIf2AuthType | read-write | current | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.2 | ColumnsnVrrpIf2AuthPassword | read-write | current | The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.3 | ColumnsnVrrpIf2RxHeaderErrCnts | read-only | current | The received Header error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.4 | ColumnsnVrrpIf2RxAuthTypeErrCnts | read-only | current | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.5 | ColumnsnVrrpIf2RxAuthPwdMismatchErrCnts | read-only | current | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.6 | ColumnsnVrrpIf2RxVridErrCnts | read-only | current | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.5 | NodesnVrrpVirRtr2 | |||
| 1.3.6.1.4.1.1991.1.2.12.5.1 | TablesnVrrpVirRtr2Table | not-accessible | current | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1 | RowsnVrrpVirRtr2Entry | not-accessible | current | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.1 | ColumnsnVrrpVirRtr2Id | read-only | current | One of the virtual router ID of this Vrrp and Vrrpe interface. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.2 | ColumnsnVrrpVirRtr2Ownership | read-write | current | The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.3 | ColumnsnVrrpVirRtr2CfgPriority | read-write | current | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.4 | ColumnsnVrrpVirRtr2TrackPriority | read-write | current | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.5 | ColumnsnVrrpVirRtr2CurrPriority | read-only | current | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.6 | ColumnsnVrrpVirRtr2HelloInt | read-write | current | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.7 | ColumnsnVrrpVirRtr2DeadInt | read-write | current | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.8 | ColumnsnVrrpVirRtr2PreemptMode | read-write | current | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.9 | ColumnsnVrrpVirRtr2State | read-only | current | This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.10 | ColumnsnVrrpVirRtr2IpAddrMask | read-write | current | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.11 | ColumnsnVrrpVirRtr2Activate | read-write | current | This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe R… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.12 | ColumnsnVrrpVirRtr2BackupInt | read-write | current | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.13 | ColumnsnVrrpVirRtr2RowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.14 | ColumnsnVrrpVirRtr2RxArpPktDropCnts | read-only | current | The received Vrrp and Vrrpe ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.15 | ColumnsnVrrpVirRtr2RxIpPktDropCnts | read-only | current | The received Vrrp and Vrrpe IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.16 | ColumnsnVrrpVirRtr2RxPortMismatchCnts | read-only | current | The received Vrrp and Vrrpe Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.17 | ColumnsnVrrpVirRtr2RxNumOfIpMismatchCnts | read-only | current | The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.18 | ColumnsnVrrpVirRtr2RxIpMismatchCnts | read-only | current | The received Vrrp and Vrrpe IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.19 | ColumnsnVrrpVirRtr2RxHelloIntMismatchCnts | read-only | current | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.20 | ColumnsnVrrpVirRtr2RxPriorityZeroFromMasterCnts | read-only | current | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.21 | ColumnsnVrrpVirRtr2RxHigherPriorityCnts | read-only | current | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.22 | ColumnsnVrrpVirRtr2TransToMasterStateCnts | read-only | current | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.23 | ColumnsnVrrpVirRtr2TransToBackupStateCnts | read-only | current | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.24 | ColumnsnVrrpVirRtr2CurrDeadInt | read-only | current | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.25 | ColumnsnVrrpVirRtr2TrackPortList | read-write | current | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.26 | ColumnsnVrrpVirRtr2AdvertiseBackup | read-write | current | Set Advertise this backup router to master |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.27 | ColumnsnVrrpVirRtr2MasterIpAddr | read-only | current | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtua… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.28 | ColumnsnVrrpVirRtr2IpAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.29 | ColumnsnVrrpVirRtr2VirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obta… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE(6)) | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |