FOUNDRY-SN-VSRP-MIB
53 objects
Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc' confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| FOUNDRY-SN-SWITCH-GROUP-MIB | snSwitch |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.21 | IdentitysnVsrp | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.21.1 | NodesnVsrpGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.21.1.1 | ScalarsnVsrpGroupOperModeVsrp | read-write | current | The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activa… |
| 1.3.6.1.4.1.1991.1.1.3.21.1.2 | ScalarsnVsrpIfStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.3 | ScalarsnVsrpIfMaxNumVridPerIntf | read-only | current | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.4 | ScalarsnVsrpIfMaxNumVridPerSystem | read-only | current | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.5 | ScalarsnVsrpClearVrrpStat | read-write | current | Clear VSRP statistics command. |
| 1.3.6.1.4.1.1991.1.1.3.21.2 | NodesnVsrpIfIntf | |||
| 1.3.6.1.4.1.1991.1.1.3.21.2.1 | TablesnVsrpIfTable | not-accessible | current | The VSRP Interface Table describes the interfaces from the viewpoint of VSRP. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1 | RowsnVsrpIfEntry | not-accessible | current | The VSRP Interface Entry describes one interface from the viewpoint of VSRP. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.1 | ColumnsnVsrpIfVlanId | read-only | current | Vlan index. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.2 | ColumnsnVsrpIfAuthType | read-write | current | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3 | ColumnsnVsrpIfAuthPassword | read-write | current | The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. |
| 1.3.6.1.4.1.1991.1.1.3.21.3 | NodesnVsrpVirRtr | |||
| 1.3.6.1.4.1.1991.1.1.3.21.3.1 | TablesnVsrpVirRtrTable | not-accessible | current | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1 | RowsnVsrpVirRtrEntry | not-accessible | current | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1 | ColumnsnVsrpVirRtrVlanId | read-only | current | Vlan index. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2 | ColumnsnVsrpVirRtrId | read-only | current | One of the virtual router ID of this vsrp interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3 | ColumnsnVsrpVirRtrOwnership | read-write | current | The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp ro… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4 | ColumnsnVsrpVirRtrCfgPriority | read-write | current | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5 | ColumnsnVsrpVirRtrTrackPriority | read-write | current | The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6 | ColumnsnVsrpVirRtrCurrPriority | read-only | current | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7 | ColumnsnVsrpVirRtrHelloInt | read-write | current | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8 | ColumnsnVsrpVirRtrDeadInt | read-write | current | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9 | ColumnsnVsrpVirRtrPreemptMode | read-write | current | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10 | ColumnsnVsrpVirRtrState | read-only | current | This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11 | ColumnsnVsrpVirRtrIpAddrMask | read-write | current | The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12 | ColumnsnVsrpVirRtrActivate | read-write | current | This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13 | ColumnsnVsrpVirRtrTrackPortList | read-write | current | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14 | ColumnsnVsrpVirRtrAdvertiseBackup | read-write | current | Set Advertise this backup router to master |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15 | ColumnsnVsrpVirRtrHoldDownInt | read-write | current | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16 | ColumnsnVsrpVirRtrInitTtl | read-write | current | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17 | ColumnsnVsrpVirRtrIncPortList | read-write | current | Include all free ports of the VLAN into its control ports |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18 | ColumnsnVsrpVirRtrSave | read-write | current | Set VSRP to save current parameters value |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19 | ColumnsnVsrpVirRtrBackupInt | read-write | current | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20 | ColumnsnVsrpVirRtrRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21 | ColumnsnVsrpVirRtrRxArpPktDropCnts | read-only | current | The received vsrp ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22 | ColumnsnVsrpVirRtrRxIpPktDropCnts | read-only | current | The received VSRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23 | ColumnsnVsrpVirRtrRxPortMismatchCnts | read-only | current | The received vsrp Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24 | ColumnsnVsrpVirRtrRxNumOfIpMismatchCnts | read-only | current | The received VSRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25 | ColumnsnVsrpVirRtrRxIpMismatchCnts | read-only | current | The received vsrp IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26 | ColumnsnVsrpVirRtrRxHelloIntMismatchCnts | read-only | current | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27 | ColumnsnVsrpVirRtrRxPriorityZeroFromMasterCnts | read-only | current | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28 | ColumnsnVsrpVirRtrRxHigherPriorityCnts | read-only | current | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29 | ColumnsnVsrpVirRtrTransToMasterStateCnts | read-only | current | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30 | ColumnsnVsrpVirRtrTransToBackupStateCnts | read-only | current | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31 | ColumnsnVsrpVirRtrCurrDeadInt | read-only | current | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32 | ColumnsnVsrpVirRtrCurHelloInt | read-only | current | Set backup router hello interval |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33 | ColumnsnVsrpVirRtrCurHoldDownInt | read-only | current | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34 | ColumnsnVsrpVirRtrCurInitTtl | read-only | current | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35 | ColumnsnVsrpVirRtrHelloMacAddress | read-only | current | Hello MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36 | ColumnsnVsrpVirRtrMasterIpAddr | read-only | current | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE(6)) | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |