FR-MIB
105 objects
This file contains MIB module for Frame Relay implementation.
Imported Objects
| BUNDLE-MIB | nnbundleId |
| NT-ENTERPRISE-DATA-MIB | ntEnterpriseDataTasmanMgmt |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.1.16 | IdentitynnfrMib | This file contains MIB module for Frame Relay implementation. | ||
| 1.3.6.1.4.1.562.73.1.1.1.16.1 | TablennfrTable | not-accessible | current | A list of a Frame Relay interface configuration parameters. The table contains parameters for both the uni and multi link frame-relay interface. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1 | RownnfrTableEntry | not-accessible | current | An entry in the frTable. The bundle Id forms the index into the table. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.1 | ColumnnnfrIfEnable | read-write | current | Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.2 | ColumnnnfrEnablePvcAll | read-write | current | Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an i… |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.3 | ColumnnnfrFrameSize | read-write | current | Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096 bytes, with a default value o… |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.4 | ColumnnnfrIfType | read-write | current | Indicates the interface type for the frame-relay interface. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.5 | ColumnnnfrLmiType | read-write | current | Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, … |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.6 | ColumnnnfrLmiDceN392 | read-write | current | DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.7 | ColumnnnfrLmiDceN393 | read-write | current | DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.8 | ColumnnnfrLmiDteN392 | read-write | current | DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.9 | ColumnnnfrLmiDteN393 | read-write | current | DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.10 | ColumnnnfrLmiDteN391 | read-write | current | DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.11 | ColumnnnfrLmiKeepalive | read-write | current | Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 secon… |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.12 | ColumnnnmfrAckMsgTimer | read-write | current | The time to wait for an ADD_LINK_ACK message before timing out. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.13 | ColumnnnmfrAckMsgMaxRetry | read-write | current | Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.14 | ColumnnnmfrClass | read-write | current | classA classB classC are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set o… |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.15 | ColumnnnmfrClassThreshold | read-write | current | Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link b… |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.16 | ColumnnnmfrFrameSize | read-write | current | The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.17 | ColumnnnmfrHelloTimer | read-write | current | Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.18 | ColumnnnmfrSegThreshold | read-write | current | Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.16.1.1.19 | ColumnnnmfrDiffDelay | read-write | current | Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2 | TablennfrPvcTable | not-accessible | current | A list of Frame Relay PVC parameters. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1 | RownnfrPvcTableEntry | not-accessible | current | An entry in the frPvcTable |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.1 | ColumnnnfrPvcDlci | not-accessible | current | Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can be reused across bundles. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.2 | ColumnnnfrPvcEnable | read-create | current | Enables PVC for given interface name and DLCI number. By default PVC is enabled. Writing one(1) on this enables PVC, zero (0) disables it. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.3 | ColumnnnfrPvcDescr | read-create | current | Description for the configured PVC. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.4 | ColumnnnfrPvcIpAddr | read-create | current | IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successf… |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.5 | ColumnnnfrPvcIpSubnetMask | read-create | current | Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.6 | ColumnnnfrPvcRemoteIpAddr | read-create | current | Remote IP address to be mapped for PVC |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.7 | ColumnnnfrPvcPolicingEnable | read-create | current | This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing is enabled. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.8 | ColumnnnfrPvcPolicingDe | read-create | current | If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.9 | ColumnnnfrPvcPolicingCir | read-create | current | Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.10 | ColumnnnfrPvcPolicingBc | read-create | current | Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.11 | ColumnnnfrPvcPolicingBe | read-create | current | Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.12 | ColumnnnfrPvcShapingCir | read-create | current | The committed information rate (in bits per second) to be configured for the PVC. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.13 | ColumnnnfrPvcShapingBcMax | read-create | current | The maximum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.14 | ColumnnnfrPvcShapingBcMin | read-create | current | The minimum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.15 | ColumnnnfrPvcShapingBe | read-create | current | The excess burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.16 | ColumnnnfrPvcDlciForSwitching | read-create | current | Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should be set with frPvcDlciForSwitc… |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.17 | ColumnnnfrPvcBundleNameForSwitching | read-create | current | The name of the bundle configured for Switching. |
| 1.3.6.1.4.1.562.73.1.1.1.16.2.1.18 | ColumnnnfrPvcRowStatus | read-create | current | To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3 | TablennfrStatsTable | not-accessible | current | The statistics objects for a frame-relay interface. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1 | RownnfrStatsTableEntry | not-accessible | current | An entry in the frStatsTable. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.1 | ColumnnnfrStatsFramesRx | read-only | current | Numbers of frames received. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.2 | ColumnnnfrStatsInvFramesRx | read-only | current | Number of invalid frames received |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.3 | ColumnnnfrStatsFECNsRx | read-only | current | Number of frames received with FECN bit on |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.4 | ColumnnnfrStatsBECNsRx | read-only | current | Number of frames received with BECN bit on. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.5 | ColumnnnfrStatsShortFramesRx | read-only | current | Number of short frames received. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.6 | ColumnnnfrStatsLongFramesRx | read-only | current | Number of long frames received. |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.7 | ColumnnnfrStatsInvDLCIsRx | read-only | current | Number of frames with invalid dlci received |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.8 | ColumnnnfrStatsUnknownDLCIsRx | read-only | current | Number of frames with unknown dlci received |
| 1.3.6.1.4.1.562.73.1.1.1.16.3.1.9 | ColumnnnfrStatsFramesTx | read-only | current | Number of frames transmitted. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4 | TablennfrPvcStatsTable | not-accessible | current | FR PVC Statistics Table |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1 | RownnfrPvcStatsTableEntry | not-accessible | current | An entry in the FrPvcStats Table |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.1 | ColumnnnfrPvcStatsBytesRxLastBootOrClear | read-only | current | Number of bytes received on a pvc since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.2 | ColumnnnfrPvcStatsBytesTxLastBootOrClear | read-only | current | Number of bytes transmitted on a pvc since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.3 | ColumnnnfrPvcStatsPktsRxLastBootOrClear | read-only | current | Number of packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.4 | ColumnnnfrPvcStatsPktsTxLastBootOrClear | read-only | current | Number of packets transmitted since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.5 | ColumnnnfrPvcStatsErrPktsRxLastBootOrClear | read-only | current | Number of errored packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.6 | ColumnnnfrPvcStatsUpDownStatesLastBootOrClear | read-only | current | Number of times state(up or down) of the pvc changed in since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.7 | ColumnnnfrPvcStatsBytesRxLastFiveMins | read-only | current | Number of bytes received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.8 | ColumnnnfrPvcStatsBytesTxLastFiveMins | read-only | current | Number of bytes transmitted in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.9 | ColumnnnfrPvcStatsPktsRxLastFiveMins | read-only | current | Number of packets received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.10 | ColumnnnfrPvcStatsPktsTxLastFiveMins | read-only | current | Number of packets transmitted in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.11 | ColumnnnfrPvcStatsErrPktsRxLastFiveMins | read-only | current | Number of errored packets received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.4.1.12 | ColumnnnfrPvcStatsUpDownStatesLastFiveMins | read-only | current | Number of times state(up or down) of the pvc changed in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5 | TablennfrAvcTable | not-accessible | current | End-to-End MFR avc parameters are defined in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1 | RownnfrAvcTableEntry | not-accessible | current | avc parameter entries are listed in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.1 | ColumnnnfrAvcId | not-accessible | current | frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by the system. Whenever a row c… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.2 | ColumnnnfrAvcDlci | read-create | current | Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. Once set during creation, it c… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.3 | ColumnnnfrAvcName | read-create | current | Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maximum length of an avc name is 8… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.4 | ColumnnnfrAvcIpAddr | read-create | current | The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have … |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.5 | ColumnnnfrAvcIpSubnetMask | read-create | current | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a avc. This parameter is set alo… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.6 | ColumnnnfrAvcRemoteIpAddr | read-create | current | Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp request packets are no longer sent f… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.7 | ColumnnnfrAvcClass | read-write | current | classA classB classC classD classE In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atomic set operation. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.8 | ColumnnnfrAvcClassThreshold | read-write | current | Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value will be in bits per second. For… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.9 | ColumnnnfrAvcFragmentSize | read-write | current | The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can be transmitted on any cvc. Fram… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.10 | ColumnnnfrAvcSegThreshold | read-write | current | Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. Frames smaller than this size m… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.11 | ColumnnnfrAvcSequence | read-write | current | multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 more bytes, but in those situati… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.12 | ColumnnnfrAvcDiffDelay | read-write | current | Differential delay in milli seconds. This variable can be set only when the AVC is in Enhanced FRF.15 mode. This value indicates the maximum tolerable differen… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.13 | ColumnnnfrAvcEnhancedMode | read-write | current | Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calculate and act on differential delay bui… |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.14 | ColumnnnfrAvcNoOfCvcs | read-only | current | Indicates the number of links configured in the avc. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.15 | ColumnnnfrAvcTotalBw | read-only | current | Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a particular avc. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.16 | ColumnnnfrAvcEnable | read-create | current | Enables the AVC. By default AVC is enabled. Writing one(1) on this enables AVC, zero(0) disables it. |
| 1.3.6.1.4.1.562.73.1.1.1.16.5.1.17 | ColumnnnfrAvcRowStatus | read-create | current | frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to t… |
| 1.3.6.1.4.1.562.73.1.1.1.16.6 | TablennfrCvcTable | not-accessible | current | End-to-End MFR cvc parameters are defined in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.16.6.1 | RownnfrCvcTableEntry | not-accessible | current | cvc parameter entries are listed in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.16.6.1.1 | ColumnnnfrCvcBundleName | read-only | current | The name of the bundle of the CVC which needs to be added to the avc. This parameter is used for display only. |
| 1.3.6.1.4.1.562.73.1.1.1.16.6.1.2 | ColumnnnfrCvcEnable | read-create | current | Enables/disables the CVC. By default CVC is enabled. Writing one(1) on this enables CVC, zero(0) disables it. |
| 1.3.6.1.4.1.562.73.1.1.1.16.6.1.3 | ColumnnnfrCvcRowStatus | read-create | current | frCvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to adding or removing a CVC from an AVC. Adding a new row will re… |
| 1.3.6.1.4.1.562.73.1.1.1.16.7 | TablennfrAvcStatsTable | not-accessible | current | The statistics objects for a frame-relay interface. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1 | RownnfrAvcStatsTableEntry | not-accessible | current | An entry in the frAvcStatsTable. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.1 | ColumnnnfrAvcStatsBytesRxLastBootOrClear | read-only | current | Number of bytes received on an avc since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.2 | ColumnnnfrAvcStatsBytesTxLastBootOrClear | read-only | current | Number of bytes transmitted on an avc since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.3 | ColumnnnfrAvcStatsPktsRxLastBootOrClear | read-only | current | Number of packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.4 | ColumnnnfrAvcStatsPktsTxLastBootOrClear | read-only | current | Number of packets transmitted since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.5 | ColumnnnfrAvcStatsErrPktsRxLastBootOrClear | read-only | current | Number of errored packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.6 | ColumnnnfrAvcStatsUpDownStatesLastBootOrClear | read-only | current | Number of times state(up or down) of the avc changed in since boot or last statistics clear. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.7 | ColumnnnfrAvcStatsBytesRxLastFiveMins | read-only | current | Number of bytes received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.8 | ColumnnnfrAvcStatsBytesTxLastFiveMins | read-only | current | Number of bytes transmitted in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.9 | ColumnnnfrAvcStatsPktsRxLastFiveMins | read-only | current | Number of packets received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.10 | ColumnnnfrAvcStatsPktsTxLastFiveMins | read-only | current | Number of packets transmitted in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.11 | ColumnnnfrAvcStatsErrPktsRxLastFiveMins | read-only | current | Number of errored packets received in the last five minutes. |
| 1.3.6.1.4.1.562.73.1.1.1.16.7.1.12 | ColumnnnfrAvcStatsUpDownStatesLastFiveMins | read-only | current | Number of times state(up or down) of the avc changed in the last five minutes. |