FS-OSPF-MIB
202 objects
This module defines fs Ospf mibs.
Imported Objects
| FS-SMI | fsMgmt |
| FS-TC | ConfigStatus |
| OSPF-MIB | AreaID DesignatedRouterPriority HelloRange PositiveInteger RouterID Status |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.30 | IdentityfsOspfMIB | This module defines fs Ospf mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.30.1 | NodefsOspfMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1 | NodefsOspfGeneralMibsGroup | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.1 | ScalarfsOspfMiniLsaInterval | read-only | current | Minimum LSA interval that the two LSA generate. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.2 | ScalarfsOspfMiniLsaArrival | read-only | current | Minimum LSA Interval of the two LSA arrival. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.3 | ScalarfsOspfAreasNum | read-only | current | Number of areas in this router |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.4 | ScalarfsOspfNormalAreasNum | read-only | current | Number of normal areas in this router |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.5 | ScalarfsOspfStubAreasNum | read-only | current | Number of stub areas in this router |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.6 | ScalarfsOspfNssaAreasNum | read-only | current | Number of nssa areas in this router |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.7 | ScalarfsOspfSpfDelay | read-write | current | Ospf Spf shedule time, an integer from 0 to 65535. The default is 5 seconds,0 means no delay. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.8 | ScalarfsOspfSpfHoldTime | read-write | current | hold time between two Spfs.an integer from 0 to 65535. The default is 10 seconds; 0 means no delay. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.9 | ScalarfsOspfAutoCostRefBandWidthRef | read-write | current | Set AutoCost bandwidth referenc value in unit of Mbits. Setting this value to 0 indicate that disable the feature of autocost bandwidth referenc. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.10 | ScalarfsOspfLsaGroupPacing | read-write | current | set the group pacing of LSAs. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.11 | ScalarfsOspfInterDistance | read-write | current | Set inter-area distance. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.12 | ScalarfsOspfIntraDistance | read-write | current | Set intra-area distance. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.13 | ScalarfsOspfExternDistance | read-write | current | Set extern distance. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.14 | ScalarfsOspfLogAdjChangeNotify | read-write | current | if enabled status is setted, Send syslog message when a neighbor state changes. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.15 | ScalarfsOspfPassiveStatus | read-write | current | The fsOspfIfPassiveStatus of a interface equal to this object value when this interface is created. If you change this object value to 'enabled' or 'disabled'a… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.16 | ScalarfsOspfRFC1583Compatibility | read-write | current | Controls the preference rules used in calculating AS external routes (RFC2328 Section 16.4) when choosing among multiple AS-external-LSAs advertising the same … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.17 | ScalarfsOspfRouteRedisDefMetricVal | read-write | current | When this value is setted,Cause the current routing protocol(ospf) to use the same metricvalue for all redistributed routes (BGP, RIP, and OSPF). |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.1.18 | ScalarfsOspfAdminiDistance | read-write | current | ospf Administrative distance. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2 | TablefsOspfAreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas.This table is superset of ospfAreaTable |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1 | RowfsOspfAreaEntry | not-accessible | current | The entry of fsOspfAreaTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.1 | ColumnfsOspfAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.2 | ColumnfsOspfAuthType | read-create | current | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.3 | ColumnfsOspfImportAsExtern | read-create | current | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.4 | ColumnfsOspfSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.5 | ColumnfsOspfAreaBdrRtrCount | read-only | current | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.6 | ColumnfsOspfAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.7 | ColumnfsOspfAreaLsaCount | read-only | current | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.8 | ColumnfsOspfAreaLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) l… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.9 | ColumnfsOspfAreaSummary | read-create | current | The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will ne… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.10 | ColumnfsOspfAreaStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.11 | ColumnfsOspfAreaInterfaceNum | read-only | current | the interface number of this area |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.12 | ColumnfsOspfAreaNssaIsRedistribution | read-create | current | if it's disabled , when the router is an NSSA ABR and you want the redistribute command to import routes into normal areas, but not into the NSSA, this field i… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.2.1.13 | ColumnfsOspfAreaNssaIsDefInfoOriginate | read-create | current | if it's enabled it meaning that on an ABR to allow importing type 7 LSAs into the NSSA, this field is valid for nssa area |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3 | TablefsOspfAddressScopeTable | not-accessible | current | Define an interface on which OSPF runs and the area ID for that interface. You can use the wildcard-mask to use a single command to define one or more multiple… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3.1 | RowfsOspfAddressScopeEntry | not-accessible | current | the entry define an scope of address for ospf routing. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3.1.1 | ColumnfsOspfNetWorkAreaID | read-only | current | area ID |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3.1.2 | ColumnfsOspfNetWorkAddress | read-only | current | Routing for Networks Ipaddress |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3.1.3 | ColumnfsOspfNetWorkMask | read-only | current | Routing for Networks mask |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.3.1.4 | ColumnfsOspfNetWorkStatus | read-create | current | when this value is destroy,the entry will be deleted |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4 | TablefsOspfIfTable | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1 | RowfsOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face configuration of OSPF. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.1 | ColumnfsOspfIfIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.2 | ColumnfsOspfAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.3 | ColumnfsOspfIfAreaId | read-only | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.4 | ColumnfsOspfIfType | read-write | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 80… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.5 | ColumnfsOspfIfAdminStat | read-only | current | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.6 | ColumnfsOspfIfRtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.7 | ColumnfsOspfIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.8 | ColumnfsOspfIfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.9 | ColumnfsOspfIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.10 | ColumnfsOspfIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.11 | ColumnfsOspfIfPollInterval | read-only | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.12 | ColumnfsOspfIfState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.13 | ColumnfsOspfIfDesignatedRouter | read-only | current | The IP Address of the interface which connected the local router in the Designated Router. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.14 | ColumnfsOspfIfBackupDesignatedRouter | read-only | current | The IP Address of the interface which connected the local router in the Backup Designated Router. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.15 | ColumnfsOspfIfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.16 | ColumnfsOspfIfAuthKey | read-write | current | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.17 | ColumnfsOspfIfStatus | read-only | current | This value will be active(1) always. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.18 | ColumnfsOspfIfMulticastForwarding | read-only | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.19 | ColumnfsOspfIfDemand | read-only | current | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this i… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.20 | ColumnfsOspfIfAuthType | read-write | current | The authentication type specified for an interface. Setting this value to 'default' means using default authentication type referenced to Area Authentication, … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.21 | ColumnfsOspfIfDatabaseFilterAllOut | read-write | current | Block flooding of OSPF LSA packets to the interface. By default, OSPF floods new LSAs over all interfaces in the same area, except the interface on which the L… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.22 | ColumnfsOspfIfDesignateRouterId | read-only | current | DR RouterID of this interface, when DR does not selected,DR Id is 0.0.0.0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.23 | ColumnfsOspfIfBackupDesignateRouterId | read-only | current | Backup DR RouterId of this interface , when Backup DR does not selected,BDR Id is 0.0.0.0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.24 | ColumnfsOspfIfWaitInternal | read-only | current | The wait time of hello generate |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.25 | ColumnfsOspfIfPassiveStatus | read-write | current | Setting this object value to 'enabled' ,the interface will become a passive interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.4.1.26 | ColumnfsOspfIfCurrentUsedMd5AuthKeyId | read-write | current | key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value.. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5 | TablefsOspfIfMd5AuthKeyTable | not-accessible | current | Configuration table of the key-id for md5 authentication for OSPF protocol. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5.1 | RowfsOspfIfMd5AuthKeyEntry | not-accessible | current | Configuration entry of the key-id for md5 authentication for OSPF protocol |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5.1.1 | ColumnfsOspfIfMd5AuthKeyIf | read-only | current | Corresponding value of ifIndex for interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5.1.2 | ColumnfsOspfIfMd5AuthKeyId | read-only | current | the key-id for md5 authentication. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5.1.3 | ColumnfsOspfIfMd5AuthKey | read-create | current | The Authentication Key for MD5. When read, fsOspfIfMd5AuthKey always returns an Oc- tet String of length zero. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.5.1.4 | ColumnfsOspfIfMd5AuthKeySt | read-create | current | Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6 | TablefsOspfVirtTable | not-accessible | current | Information about this router's virtual inter- faces.Include ospfVirtIfTable in rfc1850 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1 | RowfsOspfVirtEntry | not-accessible | current | Information about a single Virtual Interface |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.1 | ColumnfsOspfVirtIfAreaId | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.2 | ColumnfsOspfVirtIfNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.3 | ColumnfsOspfVirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.4 | ColumnfsOspfVirtIfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.5 | ColumnfsOspfVirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.6 | ColumnfsOspfVirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.7 | ColumnfsOspfVirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.8 | ColumnfsOspfVirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.9 | ColumnfsOspfVirtIfAuthKey | read-create | current | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.10 | ColumnfsOspfVirtIfStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.11 | ColumnfsOspfVirtIfAuthType | read-create | current | The authentication type specified for a virtual interface. Setting this value 'default' means using default authentication type referenced to Area Authenticati… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.12 | ColumnfsOspfVirtCost | read-only | current | Explicitly specify the cost of sending a packet on the interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.13 | ColumnfsOspfVirtNativeIfIndex | read-only | current | the Interface's Index that The Virtual Link via this interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.14 | ColumnfsOspfVirtLinkState | read-only | current | The Virtual Link State is up or down. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.15 | ColumnfsOspfVirtHelloDueIn | read-only | current | the time when hello due in. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.6.1.16 | ColumnfsOspfVirtCurrentUsedMd5AuthKeyId | read-create | current | the key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7 | TablefsOspfVirtIfMd5AuthKeyTable | not-accessible | current | Configuration table of the key-id for md5 authentication in VirtIf for OSPF protocol. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1 | RowfsOspfVirtIfMd5AuthKeyEntry | not-accessible | current | Configuration entry of the key-id for md5 authentication in VirtIf for OSPF protocol |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1.1 | ColumnfsOspfVirtIfMd5AuthKeyAreaId | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1.2 | ColumnfsOspfVirtIfMd5AuthKeyNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1.3 | ColumnfsOspfVirtIfMd5AuthKeyId | read-only | current | the key-id for md5 authentication. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1.4 | ColumnfsOspfVirtIfMd5AuthKey | read-create | current | The Authentication Key for MD5. When read, fsOspfVirtIfMd5AuthKey always returns an Oc- tet String of length zero. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.7.1.5 | ColumnfsOspfVirtIfMd5AuthKeySt | read-create | current | Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8 | NodefsOspfLsaDetailInfoMibsGroup | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1 | TablefsOspfLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1 | RowfsOspfLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.1 | ColumnfsOspfLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.2 | ColumnfsOspfLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.3 | ColumnfsOspfLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.4 | ColumnfsOspfLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.5 | ColumnfsOspfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.6 | ColumnfsOspfLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.7 | ColumnfsOspfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.8 | ColumnfsOspfLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.9 | ColumnfsOspfLsdbLinkNum | read-only | current | the link count of this Router Link Lsa , this field is only valid for Router Link Lsa��type 1 LSA) |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.10 | ColumnfsOspfLsdbPacketLength | read-only | current | the lsa packet length . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.11 | ColumnfsOspfSummaryLsaNetworkMask | read-only | current | this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's network mask . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.12 | ColumnfsOspfSummaryLsaTos0Metric | read-only | current | this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's tos0 metric . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.13 | ColumnfsOspfNssaLsaDetailMetricType | read-only | current | this field is valid when Lsa is a type-7 LSA. The type of Nssa ernal metric. If bit E is set, the metric specified is a Type 2 external metric. This means the … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.14 | ColumnfsOspfNssaLsaDetailForwardAddr | read-only | current | this field is valid when Lsa is a type-7 LSA. Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set t… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.15 | ColumnfsOspfNssaLsaDetailRouteTag | read-only | current | this field is valid when Lsa is a type-7 LSA. A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to c… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.1.1.16 | ColumnfsOspfLsdbOption | read-only | current | the option field indicate which optional capabilities area associated with the LSA. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2 | TablefsOspfExtLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1 | RowfsOspfExtLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.1 | ColumnfsOspfExtLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.2 | ColumnfsOspfExtLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.3 | ColumnfsOspfExtLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.4 | ColumnfsOspfExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.5 | ColumnfsOspfExtLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.6 | ColumnfsOspfExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.7 | ColumnfsOspfExtLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.8 | ColumnfsOspfExtLsdbNetworkMask | read-only | current | The IP address mask for the advertised destination. For example, when advertising a class A network the mask 0xff000000 would be used. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.9 | ColumnfsOspfExtLsdbMetric | read-only | current | The cost of this route. Interpretation depends on the external type indication. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.10 | ColumnfsOspfExtLsdbMetricType | read-only | current | The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.11 | ColumnfsOspfExtLsdbForwardAddr | read-only | current | Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded inst… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.12 | ColumnfsOspfExtLsdbRouteTag | read-only | current | A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary rou… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.13 | ColumnfsOspfExtLsdbOption | read-only | current | the option field indicate which optional capabilities area associated with the LSA. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.2.1.14 | ColumnfsOspfExtLsdbPacketLength | read-only | current | the lsa packet length . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3 | TablefsOspfRouterLsaDetailTable | not-accessible | current | the router Lsa's detail Infromtion. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3.1 | RowfsOspfRouterLsaDetailEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3.1.1 | ColumnfsOspfRouterLsaDetailLinkID | read-only | current | router lsa's link ID Identifies the object that this router link connects to. Value depends on the link's Type. When connecting to an object that also originat… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3.1.2 | ColumnfsOspfRouterLsaDetailLinkType | read-only | current | router lsa's link type A quick description of the router link. One of the following. Note that host routes are classified as links to stub networks with networ… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3.1.3 | ColumnfsOspfRouterLsaDetailLinkData | read-only | current | Value again depends on the link's Type field. For connections to stub networks, Link Data specifies the network's IP address mask. For unnumbered point-to-poin… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.3.1.4 | ColumnfsOspfRouterLsaDetailTos0Metric | read-only | current | TOS0-specific metric information. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.4 | TablefsOspfNetWorkLsaDetailTable | not-accessible | current | the NetWork Lsa's detail Infromtion. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.4.1 | RowfsOspfNetWorkLsaDetailEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.4.1.1 | ColumnfsOspfNetWorkLsaDetailAttachedRouter | read-only | current | The Router IDs of each of the routers attached to the network. Actually, only those routers that are fully adjacent to the Designated Router are listed. The De… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.4.1.2 | ColumnfsOspfNetWorkLsaDetailNetworkMask | read-only | current | The IP address mask for the network. For example, a class A network would have the mask 0xff000000. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5 | TablefsOspfAreaLsaDBSumTable | not-accessible | current | The OSPF Area LSA database summary Infromtion. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1 | RowfsOspfAreaLsaDBSumEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1.1 | ColumnfsOspfAreaLsaDBSumAreaId | read-only | current | The area Id. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1.2 | ColumnfsOspfAreaLsaDBSumLsaType | read-only | current | the entry's entry type. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1.3 | ColumnfsOspfAreaLsaDBSumCounts | read-only | current | number os this type Lsa in this area , if this type Lsa does not exist,this field is 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1.4 | ColumnfsOspfAreaLsaDBSumDeletes | read-only | current | number os this type Lsa which has been delete in this area , if this type Lsa is not been deleted,this field is 0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.5.1.5 | ColumnfsOspfAreaLsaDBSumMaxage | read-only | current | number of this type Lsa which has up to Maxage, if this type Lsa which has up to Maxage does not exist, this field is 0 |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6 | TablefsOspfLsaDBSumTable | not-accessible | current | LSA database total summary infromtion in the all areas . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6.1 | RowfsOspfLsaDBSumEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6.1.1 | ColumnfsOspfLsaDBSumLsaType | read-only | current | the table's entry type. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6.1.2 | ColumnfsOspfLsaDBSumCounts | read-only | current | total number of this type Lsa in all area . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6.1.3 | ColumnfsOspfLsaDBSumDeletes | read-only | current | total number of this type Lsa deleted in all area . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.8.6.1.4 | ColumnfsOspfLsaDBSumMaxage | read-only | current | total number of this type Lsa which has been up to max age in all area |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9 | TablefsOspfNeighborTable | not-accessible | current | the neighbor detail infomation . |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1 | RowfsOspfNeighborEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.1 | ColumnfsOspfNbrIpAddr | read-only | current | The IP address this neighbor(neighbor's interface IP address) is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.2 | ColumnfsOspfNbrAddressLessIndex | read-only | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.3 | ColumnfsOspfNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.4 | ColumnfsOspfNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.5 | ColumnfsOspfNbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.6 | ColumnfsOspfNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.7 | ColumnfsOspfNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.8 | ColumnfsOspfNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.9 | ColumnfsOspfNbmaNbrStatus | read-only | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.10 | ColumnfsOspfNbmaNbrPermanence | read-only | current | This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.11 | ColumnfsOspfNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.12 | ColumnfsOspfNbrDeadTimeDueIn | read-only | current | if in this interval ,hello packet is not been received , the neighbor is recognized dead.if received,it will recovery the dead time which has been setted. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.13 | ColumnfsOspfNbrNeighborUpTime | read-only | current | the time that the neighbor has been up. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.14 | ColumnfsOspfNbrDR | read-only | current | the Designated Router of this neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.15 | ColumnfsOspfNbrBDR | read-only | current | the Backup Designated Router of this neighbor. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.16 | ColumnfsOspfNbrArea | read-only | current | the area where the neighbor is in. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.17 | ColumnfsOspfNbrRetransmissionNum | read-only | current | the Retransmission times. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.9.1.18 | ColumnfsOspfNbrIfState | read-only | current | The neighbor's interface State which connected to local router. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10 | TablefsOspfRouteTable | not-accessible | current | This entity's OSPF border routing table. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1 | RowfsOspfRouteEntry | not-accessible | current | A route to a destination. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.1 | ColumnfsOspfRouteDest | read-only | current | Router ID of the destination. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.2 | ColumnfsOspfRouteArea | read-only | current | The area ID of the area from which this route is learned. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.3 | ColumnfsOspfRouteNextHop | read-only | current | Next hop toward the destination. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.4 | ColumnfsOspfRouteCost | read-only | current | Cost of using this route. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.5 | ColumnfsOspfRouteDRType | read-only | current | The router type of the destination; it is either an ABR or ASBR or both. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.6 | ColumnfsOspfRouteType | read-only | current | this field indicate this route is an intral area route or inter area route. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.1.10.1.7 | ColumnfsOspfRouteSpfNo | read-only | current | The internal number of the shortest path first (SPF) calculation that installs this route. |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2 | NodefsOspfMIBConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.1 | NodefsOspfMIBCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.1.1 | CompliancefsOspfMIBCompliance | current | The compliance statement for entities which implement the FS OSPF MIB | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2 | NodefsOspfMIBGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.1 | GroupfsOspfBaseMIBGroup | current | A collection of general objects providing OSPF managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.2 | GroupfsOspfAreaMIBGroup | current | A collection of area objects providing OSPF managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.3 | GroupfsOspfLsaMIBGroup | current | A collection of OSPF Link State Database objects providing OSPF managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.4 | GroupfsOspfIfMIBGroup | current | A collection of OSPF interface managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.5 | GroupfsOspfVirtMIBGroup | current | A collection of OSPF Virtual Link managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.6 | GroupfsOspfNeighborMIBGroup | current | A collection of OSPF Neighbor information. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.2.2.7 | GroupfsOspfRouteInfoMIBGroup | current | A collection of OSPF route information. | |
| 1.3.6.1.4.1.52642.1.1.10.2.30.3 | NodeospfMIBConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.3.1 | NodeospfMIBCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.30.3.1.1 | ComplianceospfExternCompliance | current | The compliance statement for device support of OSPF services. |