MIB Viewer

G3-AVAYA-TRAP

25 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.6889.1.8.1.0NodealarmClearA Cleared Alarm Notification has been issued by the switch indicating that all alarms have been cleared.
1.3.6.1.4.1.6889.1.8.1.1NodealarmCriticalThis trap is defined for future use.
1.3.6.1.4.1.6889.1.8.1.2NodealarmMajorA Major alarm has been issued by the switch. The MIB variables provide attributes of the alarm. The information contained in the g3alarmsPort, g3alarmsMaintNam…
1.3.6.1.4.1.6889.1.8.1.3NodealarmMinorA Minor alarm has been issued by the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, as …
1.3.6.1.4.1.6889.1.8.1.4NodealarmWarningA Warning alarm has been issued by the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, a…
1.3.6.1.4.1.6889.1.8.1.5NodeextalarmMajorAn external device Major alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice…
1.3.6.1.4.1.6889.1.8.1.6NodeextalarmMinorAn external device Minor alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice…
1.3.6.1.4.1.6889.1.8.1.7NodealarmDispatchINADS has dispatched the alarm.
1.3.6.1.4.1.6889.1.8.1.8NodealarmCloseINADS has closed the alarm.
1.3.6.1.4.1.6889.1.8.1.9NodealarmRestartA system restart has occurred on the switch. The variables describe the location and nature of the restart.
1.3.6.1.4.1.6889.1.8.1.10NodealarmNakA NAK was received in an attempt to forward the alarm to INADS.
1.3.6.1.4.1.6889.1.8.1.11NodealarmNoAckA response other than an ACK or NAK was received in an attempt to forward the alarm to INADS.
1.3.6.1.4.1.6889.1.8.1.12NodealarmResolvedAn alarm has been resolved on the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, as des…
1.3.6.1.4.1.6889.1.8.1.13NodealarmRMSAn alarm associated with security related events has been issued by the server.
1.3.6.1.4.1.6889.1.8.1.14NodeextalarmWarningAn external device Warning alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voi…
1.3.6.1.4.1.6889.1.8.1.15NodeextalarmResolvedAn external device alarm has been resolved by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice ser…
1.3.6.1.4.1.6889.1.8.1.101NodeconnectOtherThe connection status of the PBX/ECS has changed to OTHER. This status indicates that the connect is in an unknown state.
1.3.6.1.4.1.6889.1.8.1.102NodeconnectOffThe connection status of the PBX/ECS has changed to OFF. This status indicates that user set the connection state to off so that the Proxy Agent will not start…
1.3.6.1.4.1.6889.1.8.1.103NodeconnectDownThe connection status of the PBX/ECS has changed to DOWN. This status indicates that the Proxy Agent attempted to establish a connection with the PBX/ECS and f…
1.3.6.1.4.1.6889.1.8.1.104NodeconnectInitThe connection status of the PBX/ECS has changed to INIT. This status indicates that the Proxy Agent is in the process of attempting to connect to the PBX/ECS.
1.3.6.1.4.1.6889.1.8.1.105NodeconnectUpThe connection status of the PBX/ECS has changed to UP. This status indicates that the Proxy Agent has a connection established with the PBX/ECS.
1.3.6.1.4.1.6889.1.8.1.106NodeconnectIdleThe connection status of the PBX/ECS has changed to IDLE. This status indicates that a connection with the PBX/ECS is currently inactive due to the dynamic tim…
1.3.6.1.4.1.6889.1.8.1.110NodeconnectMaxThe connection to a PBX/ECS could not be established due to the maximum allowed number of simultaneous connections already being active.
1.3.6.1.4.1.6889.1.8.1.150NodeproxyDownThe user has issued a stop proxy-agent command to bring down the Proxy Agent.
1.3.6.1.4.1.6889.1.8.1.151NodeproxyUpThe user has issued a start proxy-agent command to bring up the Proxy Agent.