GBNPlatformOAMSyslog-MIB
29 objects
Syslog mib definition.
Imported Objects
| GBNPlatformOAM-MIB | gbnPlatformOAM |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.1.1.9 | IdentitygbnPlatformOAMSyslog | Syslog mib definition. | ||
| 1.3.6.1.4.1.13464.1.2.1.1.9.1 | ScalarsyslogState | read-write | current | enable or disable Syslog. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.2 | ScalarsyslogSeqNoEnable | read-write | current | display or not display sequence number in output messages. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.3 | ScalarsyslogTimestampType | read-write | current | set timestamp type shown in output messages. notime: not show timestamp; uptime: show elapse time as timestamp; datetime: show datetime as timestamp; rfc5424: … |
| 1.3.6.1.4.1.13464.1.2.1.1.9.4 | ScalarsyslogLanguageType | read-write | current | set language type used in output messages. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.5 | ScalarsyslogFacility | read-write | current | set loghost facility code. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.6 | ScalarsyslogSourceIp | read-write | current | specify source address used in syslog. 0 means no source address used. the ip address must belong to the device. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.7 | ScalarsyslogInfo | read-only | current | node that used to bind infomation to send trap by syslog. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8 | TablesyslogOutputDevInfoTable | not-accessible | current | syslog output device infomation table. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1 | RowsyslogOutputDevInfoEntry | not-accessible | current | syslog output device infomation entry. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1.1 | ColumnsyslogOutputDevInfoName | read-only | current | output device name. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1.2 | ColumnsyslogOutputDevInfoSwitch | read-write | current | output device switch. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1.3 | ColumnsyslogOutputDevInfoLogged | read-only | current | number of messages logged in this output device. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1.4 | ColumnsyslogOutputDevInfoDiscard | read-only | current | number of messages discard in this output device. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.8.1.5 | ColumnsyslogOutputDevInfoOverflow | read-only | current | number of messages overflowed in this output device. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.9 | TablesyslogLoghostAddrTable | not-accessible | current | loghost address table. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.9.1 | RowsyslogLoghostAddrEntry | not-accessible | current | loghost address entry. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.9.1.1 | ColumnsyslogLoghostAddrIp | read-create | current | loghost ip address. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.9.1.2 | ColumnsyslogLoghostAddrRowstatus | read-write | current | row status. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.10 | TablesyslogFilterRuleTable | not-accessible | current | syslog filter rule table. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.10.1 | RowsyslogFilterRuleEntry | not-accessible | current | syslog filter rule entry. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.10.1.1 | ColumnsyslogFilterRuleDevname | read-only | current | output device name. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.10.1.2 | ColumnsyslogFilterRuleModname | read-only | current | module name. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.10.1.3 | ColumnsyslogFilterRuleLevelmask | read-write | current | a 8 bits mask used to decide whether the infomation output to the device. every bit corresponds to a level, 1 means output allowed. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.11 | TablesyslogDbgTable | not-accessible | current | syslog debug switch table. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.11.1 | RowsyslogDbgEntry | not-accessible | current | syslog debug switch entry. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.11.1.1 | ColumnsyslogDbgModname | read-only | current | module name. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.11.1.2 | ColumnsyslogDbgState | read-write | current | debug switch state. |
| 1.3.6.1.4.1.13464.1.2.1.1.9.12 | NotificationsyslogTrap | current | trap node that used to send syslog messages. |