GMPLS-LSR-STD-MIB
23 objects
Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4803; see the RFC itself for full legal notices. This MIB module contains managed object definitions for the Generalized Multiprotocol (GMPLS) Label Switching Router as defined in Generalized Multi-Protocol Label Switching (GMPLS) Architecture, Mannie et al., RFC 3945, October 2004.
Imported Objects
| GMPLS-TC-STD-MIB | -- RFC 2579 GmplsSegmentDirectionTC |
| IF-MIB | -- RFC 3813 ifGeneralInformationGroup ifCounterDiscontinuityGroup |
| MPLS-LSR-STD-MIB | -- RFC 4801 mplsInterfaceIndex mplsInSegmentGroup mplsInSegmentIndex mplsInterfaceGroup mplsLsrNotificationGroup mplsOutSegmentGroup mplsOutSegmentIndex mplsPerfGroup mplsXCGroup |
| MPLS-TC-STD-MIB | -- RFC 2863 mplsStdMIB |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | -- RFC 2580 RowPointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.15 | IdentitygmplsLsrStdMIB | Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4803; see the RFC itself for full legal notices. This MIB module contains m… | ||
| 1.3.6.1.2.1.10.166.15.1 | NodegmplsLsrObjects | |||
| 1.3.6.1.2.1.10.166.15.1.1 | TablegmplsInterfaceTable | not-accessible | current | This table specifies per-interface GMPLS capability and associated information. It extends the information in the mplsInterfaceTable of MPLS-LSR-STD-MIB throug… |
| 1.3.6.1.2.1.10.166.15.1.1.1 | RowgmplsInterfaceEntry | not-accessible | current | A conceptual row in this table is created automatically by an LSR for each interface that is both capable of supporting GMPLS and configured to support GMPLS. … |
| 1.3.6.1.2.1.10.166.15.1.1.1.1 | ColumngmplsInterfaceSignalingCaps | read-create | current | Defines the signaling capabilities on this interface. Multiple bits may legitimately be set at once, but if 'unknown' is set then no other bit may be set. Sett… |
| 1.3.6.1.2.1.10.166.15.1.1.1.2 | ColumngmplsInterfaceRsvpHelloPeriod | read-create | current | Period, in milliseconds, between sending Resource Reservation Protocol (RSVP) Hello messages on this interface. A value of 0 indicates that no Hello messages s… |
| 1.3.6.1.2.1.10.166.15.1.2 | TablegmplsInSegmentTable | not-accessible | current | This table sparse augments the mplsInSegmentTable of MPLS-LSR-STD-MIB to provide GMPLS-specific information about incoming segments to an LSR. |
| 1.3.6.1.2.1.10.166.15.1.2.1 | RowgmplsInSegmentEntry | not-accessible | current | An entry in this table extends the representation of an incoming segment represented by an entry in the mplsInSegmentTable in MPLS-LSR-STD-MIB through a sparse… |
| 1.3.6.1.2.1.10.166.15.1.2.1.1 | ColumngmplsInSegmentDirection | read-create | current | This object indicates the direction of data flow on this segment. This object cannot be modified if mplsInSegmentRowStatus for the corresponding entry in the m… |
| 1.3.6.1.2.1.10.166.15.1.2.1.2 | ColumngmplsInSegmentExtraParamsPtr | read-create | current | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchronous Optical Network (SONET) res… |
| 1.3.6.1.2.1.10.166.15.1.3 | TablegmplsOutSegmentTable | not-accessible | current | This table sparse augments the mplsOutSegmentTable of MPLS-LSR-STD-MIB to provide GMPLS-specific information about outgoing segments from an LSR. |
| 1.3.6.1.2.1.10.166.15.1.3.1 | RowgmplsOutSegmentEntry | not-accessible | current | An entry in this table extends the representation of an outgoing segment represented by an entry in the mplsOutSegmentTable of MPLS-LSR-STD-MIB through a spars… |
| 1.3.6.1.2.1.10.166.15.1.3.1.1 | ColumngmplsOutSegmentDirection | read-create | current | This object indicates the direction of data flow on this segment. This object cannot be modified if mplsOutSegmentRowStatus for the corresponding entry in the … |
| 1.3.6.1.2.1.10.166.15.1.3.1.2 | ColumngmplsOutSegmentTTLDecrement | read-create | current | This object indicates the amount by which to decrement the Time to Live (TTL) of any payload packets forwarded on this segment if per-hop decrementing is being… |
| 1.3.6.1.2.1.10.166.15.1.3.1.3 | ColumngmplsOutSegmentExtraParamsPtr | read-create | current | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, SONET resource usage). Such can be supp… |
| 1.3.6.1.2.1.10.166.15.2 | NodegmplsLsrConformance | |||
| 1.3.6.1.2.1.10.166.15.2.1 | NodegmplsLsrGroups | |||
| 1.3.6.1.2.1.10.166.15.2.1.1 | GroupgmplsInterfaceGroup | current | Collection of objects that provide additional information for an MPLS interface and are needed for GMPLS interface configuration and performance information. | |
| 1.3.6.1.2.1.10.166.15.2.1.2 | GroupgmplsInSegmentGroup | current | Collection of objects that provide additional information for an MPLS in-segment and are needed for GMPLS in-segment configuration and performance information. | |
| 1.3.6.1.2.1.10.166.15.2.1.3 | GroupgmplsOutSegmentGroup | current | Collection of objects that provide additional information for an MPLS out-segment and are needed for GMPLS out-segment configuration and performance informatio… | |
| 1.3.6.1.2.1.10.166.15.2.2 | NodegmplsLsrCompliances | |||
| 1.3.6.1.2.1.10.166.15.2.2.1 | CompliancegmplsLsrModuleFullCompliance | read-only | current | Compliance statement for agents that provide full support for GMPLS-LSR-STD-MIB. The mandatory group has to be implemented by all LSRs that originate, terminat… |
| 1.3.6.1.2.1.10.166.15.2.2.2 | CompliancegmplsLsrModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for GMPLS-LSR-STD-MIB. Such devices can then be monitored but cannot be configur… |