GMPLS-TE-STD-MIB
77 objects
Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4802; see the RFC itself for full legal notices. This MIB module contains managed object definitions for GMPLS Traffic Engineering (TE) as defined in: 1. Generalized Multi-Protocol Label Switching (GMPLS) Signaling Functional Description, Berger, L. (Editor), RFC 3471, January 2003. 2. Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L. (Editor), RFC 3473, January 2003.
Imported Objects
| IANA-GMPLS-TC-MIB | -- RFC3812 IANAGmplsLSPEncodingTypeTC IANAGmplsAdminStatusInformationTC IANAGmplsGeneralizedPidTC IANAGmplsSwitchingTypeTC |
| INET-ADDRESS-MIB | -- RFC 2579 InetAddress InetAddressType |
| MPLS-TC-STD-MIB | mplsStdMIB |
| MPLS-TE-STD-MIB | -- RFC 3411 mplsTunnelIndex mplsTunnelAdminStatus mplsTunnelARHopIndex mplsTunnelARHopListIndex mplsTunnelCHopIndex mplsTunnelCHopListIndex mplsTunnelEgressLSRId mplsTunnelEntry mplsTunnelGroup mplsTunnelHopIndex mplsTunnelHopListIndex mplsTunnelHopPathOptionIndex mplsTunnelIngressLSRId mplsTunnelInstance mplsTunnelOperStatus mplsTunnelScalarGroup |
| SNMP-FRAMEWORK-MIB | -- RFC 4001 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | -- RFC 2580 TruthValue RowPointer TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.13 | IdentitygmplsTeStdMIB | Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4802; see the RFC itself for full legal notices. This MIB module contains m… | ||
| 1.3.6.1.2.1.10.166.13.0 | NodegmplsTeNotifications | |||
| 1.3.6.1.2.1.10.166.13.0.1 | NotificationgmplsTunnelDown | current | This notification is generated when an mplsTunnelOperStatus object for a tunnel in the gmplsTunnelTable is about to enter the down state from some other state … | |
| 1.3.6.1.2.1.10.166.13.1 | NodegmplsTeScalars | |||
| 1.3.6.1.2.1.10.166.13.1.1 | ScalargmplsTunnelsConfigured | read-only | current | The number of GMPLS tunnels configured on this device. A GMPLS tunnel is considered configured if an entry for the tunnel exists in the gmplsTunnelTable and th… |
| 1.3.6.1.2.1.10.166.13.1.2 | ScalargmplsTunnelsActive | read-only | current | The number of GMPLS tunnels active on this device. A GMPLS tunnel is considered active if there is an entry in the gmplsTunnelTable and the associated mplsTunn… |
| 1.3.6.1.2.1.10.166.13.2 | NodegmplsTeObjects | |||
| 1.3.6.1.2.1.10.166.13.2.1 | TablegmplsTunnelTable | not-accessible | current | The gmplsTunnelTable sparsely extends the mplsTunnelTable of MPLS-TE-STD-MIB. It allows GMPLS tunnels to be created between an LSR and a remote endpoint, and e… |
| 1.3.6.1.2.1.10.166.13.2.1.1 | RowgmplsTunnelEntry | not-accessible | current | An entry in this table in association with the corresponding entry in the mplsTunnelTable represents a GMPLS tunnel. An entry can be created by a network admin… |
| 1.3.6.1.2.1.10.166.13.2.1.1.1 | ColumngmplsTunnelUnnumIf | read-create | current | Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (the ifTable) with ifType set t… |
| 1.3.6.1.2.1.10.166.13.2.1.1.2 | ColumngmplsTunnelAttributes | read-create | current | This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnelSessionAttributes in order to … |
| 1.3.6.1.2.1.10.166.13.2.1.1.3 | ColumngmplsTunnelLSPEncoding | read-create | current | This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is not in use. Some objects in thi… |
| 1.3.6.1.2.1.10.166.13.2.1.1.4 | ColumngmplsTunnelSwitchingType | read-create | current | Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise more than one type of switching ca… |
| 1.3.6.1.2.1.10.166.13.2.1.1.5 | ColumngmplsTunnelLinkProtection | read-create | current | This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes … |
| 1.3.6.1.2.1.10.166.13.2.1.1.6 | ColumngmplsTunnelGPid | read-create | current | This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to use are defined in the TEXTUAL-CO… |
| 1.3.6.1.2.1.10.166.13.2.1.1.7 | ColumngmplsTunnelSecondary | read-create | current | Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunnelLspNotGmpls'. |
| 1.3.6.1.2.1.10.166.13.2.1.1.8 | ColumngmplsTunnelDirection | read-create | current | Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward' are meaningful only if gmplsT… |
| 1.3.6.1.2.1.10.166.13.2.1.1.9 | ColumngmplsTunnelPathComp | read-create | current | This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. d… |
| 1.3.6.1.2.1.10.166.13.2.1.1.10 | ColumngmplsTunnelUpstreamNotifyRecipientType | read-create | current | This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.11 | ColumngmplsTunnelUpstreamNotifyRecipient | read-create | current | Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received from… |
| 1.3.6.1.2.1.10.166.13.2.1.1.12 | ColumngmplsTunnelSendResvNotifyRecipientType | read-create | current | This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.13 | ColumngmplsTunnelSendResvNotifyRecipient | read-create | current | Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object is only valid when signaling a… |
| 1.3.6.1.2.1.10.166.13.2.1.1.14 | ColumngmplsTunnelDownstreamNotifyRecipientType | read-create | current | This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.15 | ColumngmplsTunnelDownstreamNotifyRecipient | read-create | current | Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received fr… |
| 1.3.6.1.2.1.10.166.13.2.1.1.16 | ColumngmplsTunnelSendPathNotifyRecipientType | read-create | current | This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.17 | ColumngmplsTunnelSendPathNotifyRecipient | read-create | current | Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object is only valid when signaling a … |
| 1.3.6.1.2.1.10.166.13.2.1.1.18 | ColumngmplsTunnelAdminStatusFlags | read-create | current | Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field to a non-zero value will resul… |
| 1.3.6.1.2.1.10.166.13.2.1.1.19 | ColumngmplsTunnelExtraParamsPtr | read-create | current | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchronous Optical Network (SONET) res… |
| 1.3.6.1.2.1.10.166.13.2.2 | TablegmplsTunnelHopTable | not-accessible | current | The gmplsTunnelHopTable sparsely extends the mplsTunnelHopTable of MPLS-TE-STD-MIB. It is used to indicate the Explicit Labels to be used in an explicit path f… |
| 1.3.6.1.2.1.10.166.13.2.2.1 | RowgmplsTunnelHopEntry | not-accessible | current | An entry in this table represents additions to a tunnel hop defined in mplsTunnelHopEntry. At an ingress to a tunnel, an entry in this table is created by a ne… |
| 1.3.6.1.2.1.10.166.13.2.2.1.1 | ColumngmplsTunnelHopLabelStatuses | read-only | current | This bitmask indicates the presence of labels indicated by the gmplsTunnelHopExplicitForwardLabel or gmplsTunnelHopExplicitForwardLabelPtr, and gmplsTunnelHopE… |
| 1.3.6.1.2.1.10.166.13.2.2.1.2 | ColumngmplsTunnelHopExplicitForwardLabel | read-create | current | If gmplsTunnelHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelHopExplicitForwardLabelPtr contains the value zeroDotZero, then … |
| 1.3.6.1.2.1.10.166.13.2.2.1.3 | ColumngmplsTunnelHopExplicitForwardLabelPtr | read-create | current | If the gmplsTunnelHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as the … |
| 1.3.6.1.2.1.10.166.13.2.2.1.4 | ColumngmplsTunnelHopExplicitReverseLabel | read-create | current | If the gmplsTunnelHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelHopExplicitReverseLabelPtr contains the value zeroDotZero, t… |
| 1.3.6.1.2.1.10.166.13.2.2.1.5 | ColumngmplsTunnelHopExplicitReverseLabelPtr | read-create | current | If the gmplsTunnelHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as the … |
| 1.3.6.1.2.1.10.166.13.2.3 | TablegmplsTunnelARHopTable | not-accessible | current | The gmplsTunnelARHopTable sparsely extends the mplsTunnelARHopTable of MPLS-TE-STD-MIB. It is used to indicate the labels currently in use for a GMPLS tunnel d… |
| 1.3.6.1.2.1.10.166.13.2.3.1 | RowgmplsTunnelARHopEntry | not-accessible | current | An entry in this table represents additions to a tunnel hop visible in mplsTunnelARHopEntry. An entry is created by the signaling protocol for a signaled ERLSP… |
| 1.3.6.1.2.1.10.166.13.2.3.1.1 | ColumngmplsTunnelARHopLabelStatuses | read-only | current | This bitmask indicates the presence and status of labels indicated by the gmplsTunnelARHopExplicitForwardLabel or gmplsTunnelARHopExplicitForwardLabelPtr, and … |
| 1.3.6.1.2.1.10.166.13.2.3.1.2 | ColumngmplsTunnelARHopExplicitForwardLabel | read-only | current | If the gmplsTunnelARHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelARHopExplicitForwardLabelPtr contains the value zeroDotZer… |
| 1.3.6.1.2.1.10.166.13.2.3.1.3 | ColumngmplsTunnelARHopExplicitForwardLabelPtr | read-only | current | If the gmplsTunnelARHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as th… |
| 1.3.6.1.2.1.10.166.13.2.3.1.4 | ColumngmplsTunnelARHopExplicitReverseLabel | read-only | current | If the gmplsTunnelARHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelARHopExplicitReverseLabelPtr contains the value zeroDotZer… |
| 1.3.6.1.2.1.10.166.13.2.3.1.5 | ColumngmplsTunnelARHopExplicitReverseLabelPtr | read-only | current | If the gmplsTunnelARHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as th… |
| 1.3.6.1.2.1.10.166.13.2.3.1.6 | ColumngmplsTunnelARHopProtection | read-only | current | Availability and usage of protection on the reported link. localAvailable This flag is set to indicate that the link downstream of this node is protected via a… |
| 1.3.6.1.2.1.10.166.13.2.4 | TablegmplsTunnelCHopTable | not-accessible | current | The gmplsTunnelCHopTable sparsely extends the mplsTunnelCHopTable of MPLS-TE-STD-MIB. It is used to indicate additional information about the hops of a GMPLS t… |
| 1.3.6.1.2.1.10.166.13.2.4.1 | RowgmplsTunnelCHopEntry | not-accessible | current | An entry in this table represents additions to a computed tunnel hop visible in mplsTunnelCHopEntry. An entry is created by a path computation component based … |
| 1.3.6.1.2.1.10.166.13.2.4.1.1 | ColumngmplsTunnelCHopLabelStatuses | read-only | current | This bitmask indicates the presence of labels indicated by the gmplsTunnelCHopExplicitForwardLabel or gmplsTunnelCHopExplicitForwardLabelPtr and gmplsTunnelCHo… |
| 1.3.6.1.2.1.10.166.13.2.4.1.2 | ColumngmplsTunnelCHopExplicitForwardLabel | read-only | current | If the gmplsTunnelCHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelCHopExplicitForwardLabelPtr contains the value zeroDotZero,… |
| 1.3.6.1.2.1.10.166.13.2.4.1.3 | ColumngmplsTunnelCHopExplicitForwardLabelPtr | read-only | current | If the gmplsTunnelCHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as the… |
| 1.3.6.1.2.1.10.166.13.2.4.1.4 | ColumngmplsTunnelCHopExplicitReverseLabel | read-only | current | If the gmplsTunnelCHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelCHopExplicitReverseLabelPtr contains the value zeroDotZero,… |
| 1.3.6.1.2.1.10.166.13.2.4.1.5 | ColumngmplsTunnelCHopExplicitReverseLabelPtr | read-only | current | If the gmplsTunnelCHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as the… |
| 1.3.6.1.2.1.10.166.13.2.5 | TablegmplsTunnelReversePerfTable | not-accessible | current | This table augments the gmplsTunnelTable to provide per-tunnel packet performance information for the reverse direction of a bidirectional tunnel. It can be se… |
| 1.3.6.1.2.1.10.166.13.2.5.1 | RowgmplsTunnelReversePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every bidirectional GMPLS tunnel where packets are visible to the LSR. |
| 1.3.6.1.2.1.10.166.13.2.5.1.1 | ColumngmplsTunnelReversePerfPackets | read-only | current | Number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant par… |
| 1.3.6.1.2.1.10.166.13.2.5.1.2 | ColumngmplsTunnelReversePerfHCPackets | read-only | current | High-capacity counter for number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, t… |
| 1.3.6.1.2.1.10.166.13.2.5.1.3 | ColumngmplsTunnelReversePerfErrors | read-only | current | Number of errored packets received on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter … |
| 1.3.6.1.2.1.10.166.13.2.5.1.4 | ColumngmplsTunnelReversePerfBytes | read-only | current | Number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part … |
| 1.3.6.1.2.1.10.166.13.2.5.1.5 | ColumngmplsTunnelReversePerfHCBytes | read-only | current | High-capacity counter for number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, thi… |
| 1.3.6.1.2.1.10.166.13.2.6 | TablegmplsTunnelErrorTable | not-accessible | current | This table augments the mplsTunnelTable. This table provides per-tunnel information about errors. Errors may be detected locally or reported through the signal… |
| 1.3.6.1.2.1.10.166.13.2.6.1 | RowgmplsTunnelErrorEntry | not-accessible | current | An entry in this table is created by the LSR for every tunnel where error information is visible to the LSR. Note that systems that read the objects in this ta… |
| 1.3.6.1.2.1.10.166.13.2.6.1.1 | ColumngmplsTunnelErrorLastErrorType | read-only | current | The nature of the last error. Provides interpretation context for gmplsTunnelErrorProtocolCode and gmplsTunnelErrorProtocolSubcode. A value of noError(0) shows… |
| 1.3.6.1.2.1.10.166.13.2.6.1.2 | ColumngmplsTunnelErrorLastTime | read-only | current | The time at which the last error occurred. This is presented as the value of SysUpTime when the error occurred or was reported to this node. If gmplsTunnelErro… |
| 1.3.6.1.2.1.10.166.13.2.6.1.3 | ColumngmplsTunnelErrorReporterType | read-only | current | The address type of the error reported. This object is used to aid in interpretation of gmplsTunnelErrorReporter. |
| 1.3.6.1.2.1.10.166.13.2.6.1.4 | ColumngmplsTunnelErrorReporter | read-only | current | The address of the node reporting the last error, or the address of the resource (such as an interface) associated with the error. If gmplsTunnelErrorLastError… |
| 1.3.6.1.2.1.10.166.13.2.6.1.5 | ColumngmplsTunnelErrorCode | read-only | current | The primary error code associated with the last error. The interpretation of this error code depends on the value of gmplsTunnelErrorLastErrorType. If the valu… |
| 1.3.6.1.2.1.10.166.13.2.6.1.6 | ColumngmplsTunnelErrorSubcode | read-only | current | The secondary error code associated with the last error and the protocol used to signal this tunnel. This value is interpreted in the context of the value of g… |
| 1.3.6.1.2.1.10.166.13.2.6.1.7 | ColumngmplsTunnelErrorTLVs | read-only | current | The sequence of interface identifier TLVs reported with the error by the protocol code. The interpretation of the TLVs and the encoding within the protocol are… |
| 1.3.6.1.2.1.10.166.13.2.6.1.8 | ColumngmplsTunnelErrorHelpString | read-only | current | A textual string containing information about the last error, recovery actions, and support advice. If there is no help string, this object contains a zero len… |
| 1.3.6.1.2.1.10.166.13.3 | NodegmplsTeConformance | |||
| 1.3.6.1.2.1.10.166.13.3.1 | NodegmplsTeGroups | |||
| 1.3.6.1.2.1.10.166.13.3.1.1 | GroupgmplsTunnelGroup | current | Necessary, but not sufficient, set of objects to implement tunnels. In addition, depending on the type of the tunnels supported (for example, manually configur… | |
| 1.3.6.1.2.1.10.166.13.3.1.2 | GroupgmplsTunnelSignaledGroup | current | Objects needed to implement signaled tunnels. | |
| 1.3.6.1.2.1.10.166.13.3.1.3 | GroupgmplsTunnelScalarGroup | current | Scalar objects needed to implement MPLS tunnels. | |
| 1.3.6.1.2.1.10.166.13.3.1.4 | GroupgmplsTunnelOptionalGroup | current | The objects in this group are optional. | |
| 1.3.6.1.2.1.10.166.13.3.1.5 | GroupgmplsTeNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.2.1.10.166.13.3.2 | NodegmplsTeCompliances | |||
| 1.3.6.1.2.1.10.166.13.3.2.1 | CompliancegmplsTeModuleFullCompliance | current | Compliance statement for agents that provide full support for GMPLS-TE-STD-MIB. Such devices can then be monitored and also be configured using this MIB module… | |
| 1.3.6.1.2.1.10.166.13.3.2.2 | CompliancegmplsTeModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for GMPLS-TE-STD-MIB. Such devices can then be monitored but cannot be configure… |