MIB Viewer

GSMP-MIB

104 objects
This MIB contains managed object definitions for the General Switch Management Protocol, GSMP, version 3
OIDNameAccessStatusDescription
1.3.6.1.2.1.98IdentitygsmpMIBThis MIB contains managed object definitions for the General Switch Management Protocol, GSMP, version 3
1.3.6.1.2.1.98.0NodegsmpNotifications
1.3.6.1.2.1.98.0.1NotificationgsmpSessionDowncurrentWhen it has been enabled, this notification is generated whenever a session is taken down, regardless of whether the session went down normally or not. Its pur…
1.3.6.1.2.1.98.0.2NotificationgsmpSessionUpcurrentWhen it has been enabled, this notification is generated when new session is established. The new session is identified by the gsmpSessionThisSideId and gsmpSe…
1.3.6.1.2.1.98.0.3NotificationgsmpSentFailureIndcurrentWhen it has been enabled, this notification is generated when a message with a failure indication was sent. The notification indicates a change in the value of…
1.3.6.1.2.1.98.0.4NotificationgsmpReceivedFailureIndcurrentWhen it has been enabled, this notification is generate when a message with a failure indication is received. The notification indicates a change in the value …
1.3.6.1.2.1.98.0.5NotificationgsmpPortUpEventcurrentWhen it has been enabled, this notification is generated when a Port Up Event occurs. The notification indicates a change in the value of gsmpSessionStatPortUp…
1.3.6.1.2.1.98.0.6NotificationgsmpPortDownEventcurrentWhen it has been enabled, this notification is generated when a Port Down Event occurs. The notification indicates a change in the value of gsmpSessionStatPort…
1.3.6.1.2.1.98.0.7NotificationgsmpInvalidLabelEventcurrentWhen it has been enabled, this notification is generated when an Invalid Label Event occurs. The notification indicates a change in the value of gsmpSessionSta…
1.3.6.1.2.1.98.0.8NotificationgsmpNewPortEventcurrentWhen it has been enabled, this notification is generated when a New Port Event occurs. The notification indicates a change in the value of gsmpSessionStatNewPo…
1.3.6.1.2.1.98.0.9NotificationgsmpDeadPortEventcurrentWhen it has been enabled, this notification is generated when a Dead Port Event occurs. The notification indicates a change in the value of gsmpSessionStatDead…
1.3.6.1.2.1.98.0.10NotificationgsmpAdjacencyUpdateEventcurrentWhen it has been enabled, this notification is generated when an Adjacency Update Event occurs. The gsmpSessionAdjacencyCount contains the new value of the num…
1.3.6.1.2.1.98.1NodegsmpObjects
1.3.6.1.2.1.98.1.1TablegsmpControllerTablenot-accessiblecurrentThis table represents the Switch Controller Entities. An entry in this table needs to be configured (created) before a GSMP session might be started.
1.3.6.1.2.1.98.1.1.1RowgsmpControllerEntrynot-accessiblecurrentAn entry in the table showing the data for a specific Switch Controller Entity. If partitions are used, one entity corresponds to one specific switch partition…
1.3.6.1.2.1.98.1.1.1.1ColumngsmpControllerEntityIdnot-accessiblecurrentThe Switch Controller Entity Id is unique within the operational context of the device.
1.3.6.1.2.1.98.1.1.1.2ColumngsmpControllerMaxVersionread-createcurrentThe max version number of the GSMP protocol being used in this session. The version is negotiated by the adjacency protocol.
1.3.6.1.2.1.98.1.1.1.3ColumngsmpControllerTimerread-createcurrentThe timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified …
1.3.6.1.2.1.98.1.1.1.4ColumngsmpControllerPortread-createcurrentThe local port number for the Switch Controller Entity.
1.3.6.1.2.1.98.1.1.1.5ColumngsmpControllerInstanceread-onlycurrentThe instance number for the Switch Controller Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and …
1.3.6.1.2.1.98.1.1.1.6ColumngsmpControllerPartitionTyperead-createcurrentA controller can request the specific partition identifier to the session by setting the Partition Type to fixedPartitionRequest(2). A controller can let the s…
1.3.6.1.2.1.98.1.1.1.7ColumngsmpControllerPartitionIdread-createcurrentThe Id for the specific switch partition that this Switch Controller is concerned with. If partitions are not used or if the controller lets the switch assigns…
1.3.6.1.2.1.98.1.1.1.8ColumngsmpControllerDoResyncread-createcurrentThis object specifies whether the controller should resynchronise or reset in case of loss of synchronisation. If this object is set to true then the Controlle…
1.3.6.1.2.1.98.1.1.1.9ColumngsmpControllerNotificationMapread-createcurrentThis bitmap defines whether a corresponding SNMP notification should be sent if a GSMP event is received by the Switch Controller. If the bit is set to 1 a not…
1.3.6.1.2.1.98.1.1.1.10ColumngsmpControllerSessionStateread-onlycurrentThe state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet conf…
1.3.6.1.2.1.98.1.1.1.11ColumngsmpControllerStorageTyperead-createcurrentThe storage type for this controller entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
1.3.6.1.2.1.98.1.1.1.12ColumngsmpControllerRowStatusread-createcurrentAn object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to mod…
1.3.6.1.2.1.98.1.2TablegsmpSwitchTablenot-accessiblecurrentThis table represents the Switch Entities. An entry in this table needs to be configured (created) before a GSMP session might be started.
1.3.6.1.2.1.98.1.2.1RowgsmpSwitchEntrynot-accessiblecurrentAn entry in the table showing the data for a specific Switch Entity. If partitions are used, one entity corresponds to one specific switch partition. Depending…
1.3.6.1.2.1.98.1.2.1.1ColumngsmpSwitchEntityIdnot-accessiblecurrentThe Switch Entity Id is unique within the operational context of the device.
1.3.6.1.2.1.98.1.2.1.2ColumngsmpSwitchMaxVersionread-createcurrentThe max version number of the GSMP protocol being supported by this Switch. The version is negotiated by the adjacency protocol.
1.3.6.1.2.1.98.1.2.1.3ColumngsmpSwitchTimerread-createcurrentThe timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified …
1.3.6.1.2.1.98.1.2.1.4ColumngsmpSwitchNameread-createcurrentThe name of the Switch. The first three octets must be an Organisationally Unique Identifier (OUI) that identifies the manufacturer of the Switch. This is by d…
1.3.6.1.2.1.98.1.2.1.5ColumngsmpSwitchPortread-createcurrentThe local port number for this Switch Entity.
1.3.6.1.2.1.98.1.2.1.6ColumngsmpSwitchInstanceread-onlycurrentThe instance number for the Switch Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change w…
1.3.6.1.2.1.98.1.2.1.7ColumngsmpSwitchPartitionTyperead-createcurrentA switch can assign the specific partition identifier to the session by setting the Partition Type to fixedPartitionAssigned(3). A switch can specify that no p…
1.3.6.1.2.1.98.1.2.1.8ColumngsmpSwitchPartitionIdread-createcurrentThe Id for this specific switch partition that the switch entity represents. If partitions are not used, i.e. Partition Type = noPartition(1), then this object…
1.3.6.1.2.1.98.1.2.1.9ColumngsmpSwitchNotificationMapread-createcurrentThis bitmap defines whether a corresponding SNMP notification should be sent if an GSMP event is sent by the Switch Entity. If the bit is set to 1 a notificati…
1.3.6.1.2.1.98.1.2.1.10ColumngsmpSwitchSwitchTyperead-createcurrentA 16-bit field allocated by the manufacturer of the switch. The Switch Type identifies the product. When the Switch Type is combined with the OUI from the Swit…
1.3.6.1.2.1.98.1.2.1.11ColumngsmpSwitchWindowSizeread-createcurrentThe maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent …
1.3.6.1.2.1.98.1.2.1.12ColumngsmpSwitchSessionStateread-onlycurrentThe state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet conf…
1.3.6.1.2.1.98.1.2.1.13ColumngsmpSwitchStorageTyperead-createcurrentThe storage type for this switch entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
1.3.6.1.2.1.98.1.2.1.14ColumngsmpSwitchRowStatusread-createcurrentAn object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to mod…
1.3.6.1.2.1.98.1.3TablegsmpAtmEncapTablenot-accessiblecurrentThis table contains the atm encapsulation data for the Controller or Switch that uses atm aal5 as encapsulation.
1.3.6.1.2.1.98.1.3.1RowgsmpAtmEncapEntrynot-accessiblecurrentAn entry in the table showing the encapsulation data for a specific Switch Controller entity or Switch entity.
1.3.6.1.2.1.98.1.3.1.1ColumngsmpAtmEncapEntityIdnot-accessiblecurrentThe Controller Id or Switch Id that is unique within the operational context of the device.
1.3.6.1.2.1.98.1.3.1.2ColumngsmpAtmEncapIfIndexread-createcurrentThe interface index for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages …
1.3.6.1.2.1.98.1.3.1.3ColumngsmpAtmEncapVpiread-createcurrentThe VPI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an …
1.3.6.1.2.1.98.1.3.1.4ColumngsmpAtmEncapVciread-createcurrentThe VCI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an …
1.3.6.1.2.1.98.1.3.1.5ColumngsmpAtmEncapStorageTyperead-createcurrentThe storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.
1.3.6.1.2.1.98.1.3.1.6ColumngsmpAtmEncapRowStatusread-createcurrentAn object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to mod…
1.3.6.1.2.1.98.1.4TablegsmpTcpIpEncapTablenot-accessiblecurrentThis table contains the encapsulation data for the Controller or Switch that uses TCP/IP as encapsulation.
1.3.6.1.2.1.98.1.4.1RowgsmpTcpIpEncapEntrynot-accessiblecurrentAn entry in the table showing the encapsulation data for a specific Switch Controller entity or Switch entity.
1.3.6.1.2.1.98.1.4.1.1ColumngsmpTcpIpEncapEntityIdnot-accessiblecurrentThe Controller or Switch Id is unique within the operational context of the device.
1.3.6.1.2.1.98.1.4.1.2ColumngsmpTcpIpEncapAddressTyperead-createcurrentThe type of address in gsmpTcpIpEncapAddress.
1.3.6.1.2.1.98.1.4.1.3ColumngsmpTcpIpEncapAddressread-createcurrentThe IPv4 or IPv6 address used for the GSMP session peer.
1.3.6.1.2.1.98.1.4.1.4ColumngsmpTcpIpEncapPortNumberread-createcurrentThe TCP port number used for the TCP session establishment to the GSMP peer.
1.3.6.1.2.1.98.1.4.1.5ColumngsmpTcpIpEncapStorageTyperead-createcurrentThe storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.
1.3.6.1.2.1.98.1.4.1.6ColumngsmpTcpIpEncapRowStatusread-createcurrentAn object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to mod…
1.3.6.1.2.1.98.1.5TablegsmpSessionTablenot-accessiblecurrentThis table represents the sessions between Controller and Switch pairs.
1.3.6.1.2.1.98.1.5.1RowgsmpSessionEntrynot-accessiblecurrentAn entry in the table showing the session data for a specific Controller and Switch pair. Also, statistics for this specific session is shown.
1.3.6.1.2.1.98.1.5.1.1ColumngsmpSessionThisSideIdnot-accessiblecurrentThis side ID uniquely identifies the entity that this session relates to within the operational context of the device.
1.3.6.1.2.1.98.1.5.1.2ColumngsmpSessionFarSideIdnot-accessiblecurrentThe Far side ID uniquely identifies the entity that this session is established against.
1.3.6.1.2.1.98.1.5.1.3ColumngsmpSessionVersionread-onlycurrentThe version number of the GSMP protocol being used in this session. The version is the result of the negotiation by the adjacency protocol.
1.3.6.1.2.1.98.1.5.1.4ColumngsmpSessionTimerread-onlycurrentThe timer specifies the time remaining until the adjacency timer expires. The object could take negative values since if no valid GSMP messages are received in…
1.3.6.1.2.1.98.1.5.1.5ColumngsmpSessionPartitionIdread-onlycurrentThe Partition Id for the specific switch partition that this session is concerned with.
1.3.6.1.2.1.98.1.5.1.6ColumngsmpSessionAdjacencyCountread-onlycurrentThis object specifies the current number of adjacencies that are established with controllers and the switch partition that is used for this session. The value…
1.3.6.1.2.1.98.1.5.1.7ColumngsmpSessionFarSideNameread-onlycurrentThe name of the far side as advertised in the adjacency message.
1.3.6.1.2.1.98.1.5.1.8ColumngsmpSessionFarSidePortread-onlycurrentThe local port number of the link across which the message is being sent.
1.3.6.1.2.1.98.1.5.1.9ColumngsmpSessionFarSideInstanceread-onlycurrentThe instance number used for the link during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past…
1.3.6.1.2.1.98.1.5.1.10ColumngsmpSessionLastFailureCoderead-onlycurrentThis is the last failure code that was received over this session. If no failure code have been received, the value is zero.
1.3.6.1.2.1.98.1.5.1.11ColumngsmpSessionDiscontinuityTimeread-onlycurrentThe value of sysUpTime on the most recent occasion at which one or more of this session's counters suffered a discontinuity. If no such discontinuities have oc…
1.3.6.1.2.1.98.1.5.1.12ColumngsmpSessionStartUptimeread-onlycurrentThe value of sysUpTime when the session came to established state.
1.3.6.1.2.1.98.1.5.1.13ColumngsmpSessionStatSentMessagesread-onlycurrentThe number of messages that have been sent in this session. All GSMP messages pertaining to this session after the session came to established state SHALL be c…
1.3.6.1.2.1.98.1.5.1.14ColumngsmpSessionStatFailureIndsread-onlycurrentThe number of messages that have been sent with a failure indication in this session. Warning messages SHALL NOT be counted. When the counter suffers any disco…
1.3.6.1.2.1.98.1.5.1.15ColumngsmpSessionStatReceivedMessagesread-onlycurrentThe number of messages that have been received in this session. All legal GSMP messages pertaining to this session after the session came to established state …
1.3.6.1.2.1.98.1.5.1.16ColumngsmpSessionStatReceivedFailuresread-onlycurrentThe number of messages that have been received in this session with a failure indication. Warning messages SHALL NOT be counted. When the counter suffers any d…
1.3.6.1.2.1.98.1.5.1.17ColumngsmpSessionStatPortUpEventsread-onlycurrentThe number of Port Up events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime…
1.3.6.1.2.1.98.1.5.1.18ColumngsmpSessionStatPortDownEventsread-onlycurrentThe number of Port Down events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTi…
1.3.6.1.2.1.98.1.5.1.19ColumngsmpSessionStatInvLabelEventsread-onlycurrentThe number of Invalid label events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinui…
1.3.6.1.2.1.98.1.5.1.20ColumngsmpSessionStatNewPortEventsread-onlycurrentThe number of New Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTim…
1.3.6.1.2.1.98.1.5.1.21ColumngsmpSessionStatDeadPortEventsread-onlycurrentThe number of Dead Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTi…
1.3.6.1.2.1.98.1.5.1.22ColumngsmpSessionStatAdjUpdateEventsread-onlycurrentThe number of Adjacency Update events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDisconti…
1.3.6.1.2.1.98.2NodegsmpNotificationsObjects
1.3.6.1.2.1.98.2.1ScalargsmpEventPortaccessible-for-notifycurrentThis object specifies the Port Number that is carried in this event.
1.3.6.1.2.1.98.2.2ScalargsmpEventPortSessionNumberaccessible-for-notifycurrentThis object specifies the Port Session Number that is carried in this event.
1.3.6.1.2.1.98.2.3ScalargsmpEventSequenceNumberaccessible-for-notifycurrentThis object specifies the Event Sequence Number that is carried in this event.
1.3.6.1.2.1.98.2.4ScalargsmpEventLabelaccessible-for-notifycurrentThis object specifies the Label that is carried in this event.
1.3.6.1.2.1.98.3NodegsmpConformance
1.3.6.1.2.1.98.3.1NodegsmpGroups
1.3.6.1.2.1.98.3.1.1GroupgsmpGeneralGroupcurrentObjects that apply to all GSMP implementations.
1.3.6.1.2.1.98.3.1.2GroupgsmpControllerGroupcurrentObjects that apply GSMP implementations of Switch Controllers.
1.3.6.1.2.1.98.3.1.3GroupgsmpSwitchGroupcurrentObjects that apply GSMP implementations of Switches.
1.3.6.1.2.1.98.3.1.4GroupgsmpAtmEncapGroupcurrentObjects that apply to GSMP implementations that supports ATM for GSMP encapsulation.
1.3.6.1.2.1.98.3.1.5GroupgsmpTcpIpEncapGroupcurrentObjects that apply to GSMP implementations that supports TCP/IP for GSMP encapsulation.
1.3.6.1.2.1.98.3.1.6GroupgsmpNotificationObjectsGroupcurrentObjects that are contained in the notifications.
1.3.6.1.2.1.98.3.1.7GroupgsmpNotificationsGroupcurrentThe notifications which indicate specific changes in the value of objects gsmpSessionTable
1.3.6.1.2.1.98.3.2NodegsmpCompliances
1.3.6.1.2.1.98.3.2.1CompliancegsmpModuleCompliancecurrentThe compliance statement for agents that support the GSMP MIB.
Type Definitions
NameSyntaxStatusDescription
GsmpLabelTypeOCTET STRINGcurrentThe label is structured as a TLV, a tuple, consisting of a Type, a Length, and a Value. The structure is defined in [RFC 3292]. The label TLV is encoded as a 2 octet type field, followed by a 2 octet Length field, follo…
GsmpNameTypeOCTET STRING (SIZE(6))currentThe Name is a 48-bit quantity. A 48-bit IEEE 802 MAC address, if available, may be used.
GsmpPartitionIdTypeOCTET STRING (SIZE(1))currentA 8-bit quantity. The format of the Partition ID is not defined in GSMP. If desired, the Partition ID can be divided into multiple sub-identifiers within a single partition. For example: the Partition ID could be subdiv…
GsmpPartitionTypeINTEGER { noPartition(1), fixedPartitionRequest(2), fixedPartitionAssigned(3) }currentDefining if partitions are used and how the partition id is negotiated.
GsmpVersionUnsigned32currentThe version numbers defined for the GSMP protocol. The version numbers used are defined in the specifications of the respective protocol, 1 - GSMPv1.1 [RFC1987] 2 - GSMPv2.0 [RFC2397] 3 - GSMPv3 [RFC3292] Other numbers …