HIRSCHMANN-MMP4-BASICL2-MIB
406 objects
The Hirschmann Private Platform4 Basic Layer 2 MIB definitions for Platform devices.
Imported Objects
| HMPRIV-MGMT-SNMP-MIB | hirschmann HmAgentLogSeverity |
| IANAifType-MIB | IANAifType |
| IEEE8021-PAE-MIB | dot1xPaePortNumber |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress |
| Q-BRIDGE-MIB | dot1qFdbId dot1qVlanIndex VlanIndex |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.15 | NodehmPlatform4 | |||
| 1.3.6.1.4.1.248.15.1 | IdentityhmPlatform4BasicL2 | The Hirschmann Private Platform4 Basic Layer 2 MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.15.1.1 | NodehmAgentInfoGroup | |||
| 1.3.6.1.4.1.248.15.1.1.2 | NodehmAgentTrapLogGroup | |||
| 1.3.6.1.4.1.248.15.1.1.2.1 | ScalarhmAgentTrapLogTotal | read-only | current | The total number of traps sent since last reset. |
| 1.3.6.1.4.1.248.15.1.1.2.3 | ScalarhmAgentTrapLogTotalSinceLastViewed | read-only | deprecated | The number of traps sent since last viewed. |
| 1.3.6.1.4.1.248.15.1.1.2.4 | TablehmAgentTrapLogTable | not-accessible | current | Agent Trap Log |
| 1.3.6.1.4.1.248.15.1.1.2.4.1 | RowhmAgentTrapLogEntry | not-accessible | current | Agent trap log entry |
| 1.3.6.1.4.1.248.15.1.1.2.4.1.1 | ColumnhmAgentTrapLogIndex | read-only | current | Unique index of trap entry |
| 1.3.6.1.4.1.248.15.1.1.2.4.1.2 | ColumnhmAgentTrapLogSystemTime | read-only | current | System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. |
| 1.3.6.1.4.1.248.15.1.1.2.4.1.3 | ColumnhmAgentTrapLogTrap | read-only | current | Description of the trap sent. |
| 1.3.6.1.4.1.248.15.1.2 | NodehmAgentConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.1 | NodehmAgentCLIConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.1.1 | TablehmAgentLoginSessionTable | not-accessible | current | A table of the switch's login session |
| 1.3.6.1.4.1.248.15.1.2.1.1.1 | RowhmAgentLoginSessionEntry | not-accessible | current | Login Session Entry |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.1 | ColumnhmAgentLoginSessionIndex | read-only | current | Agent Login Session Index of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.2 | ColumnhmAgentLoginSessionUserName | read-only | current | Agent Login Session UserName of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.3 | ColumnhmAgentLoginSessionIPAddress | read-only | current | Agent Login Session IP Address of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.4 | ColumnhmAgentLoginSessionConnectionType | read-only | current | Agent Login Session Connection Type of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.5 | ColumnhmAgentLoginSessionIdleTime | read-only | current | Agent Login Session Idle Time of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.6 | ColumnhmAgentLoginSessionSessionTime | read-only | current | Agent Login Session Time of the switch |
| 1.3.6.1.4.1.248.15.1.2.1.1.1.7 | ColumnhmAgentLoginSessionStatus | read-write | current | Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user. |
| 1.3.6.1.4.1.248.15.1.2.1.2 | NodehmAgentTelnetConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.1.2.1 | ScalarhmAgentTelnetLoginTimeout | read-write | current | Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idl… |
| 1.3.6.1.4.1.248.15.1.2.1.2.2 | ScalarhmAgentTelnetMaxSessions | read-write | current | Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be es… |
| 1.3.6.1.4.1.248.15.1.2.1.2.3 | ScalarhmAgentTelnetAllowNewMode | read-write | current | Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session re… |
| 1.3.6.1.4.1.248.15.1.2.1.3 | NodehmAgentUserConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.1.3.1 | ScalarhmAgentUserConfigCreate | read-write | current | Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li… |
| 1.3.6.1.4.1.248.15.1.2.1.3.2 | TablehmAgentUserConfigTable | not-accessible | current | User Config Table |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1 | RowhmAgentUserConfigEntry | not-accessible | current | User Config Entry |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.1 | ColumnhmAgentUserIndex | not-accessible | current | Agent User Config Index |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.2 | ColumnhmAgentUserName | read-write | current | Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters). |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.3 | ColumnhmAgentUserPassword | read-write | current | Agent User Password This object will return an empty string even if a password is set. |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.4 | ColumnhmAgentUserAccessMode | read-write | current | Agent User Access Mode |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.5 | ColumnhmAgentUserStatus | read-write | current | Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.6 | ColumnhmAgentUserAuthenticationType | read-write | current | SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1… |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.7 | ColumnhmAgentUserEncryptionType | read-write | current | SNMPv3 User Encryption Can not be set to des(2) if hmAgentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used |
| 1.3.6.1.4.1.248.15.1.2.1.3.2.1.8 | ColumnhmAgentUserEncryptionPassword | read-write | current | SNMPv3 User Encryption Password This object will return an empty string even if a password is set. hmAgentUserEncryptionType must be set to des(2) before this … |
| 1.3.6.1.4.1.248.15.1.2.1.3.248 | ScalarhmAgentUserDefaultPwdActive | read-only | current | Shows if one or more default passwords are active for users configured in the hmAgentUserConfigTable. |
| 1.3.6.1.4.1.248.15.1.2.1.250 | ScalarhmAgentConfigEncryptionSecret | read-write | current | Secret to encrypt the configuration file of the device. Format: '[old secret]|[new secret]' set secret: '|[new secret]' change secret: '[old secret]|[new secre… |
| 1.3.6.1.4.1.248.15.1.2.1.251 | ScalarhmAgentConfigEncryptionStatus | read-only | current | Show if the config encryption is enabled or disabled ( a secret is set or not) on this device. |
| 1.3.6.1.4.1.248.15.1.2.2 | NodehmAgentLagConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.2.1 | ScalarhmAgentLagConfigCreate | read-write | current | Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name. |
| 1.3.6.1.4.1.248.15.1.2.2.2 | TablehmAgentLagSummaryConfigTable | not-accessible | current | A summary table of the switch's LAG config entries |
| 1.3.6.1.4.1.248.15.1.2.2.2.1 | RowhmAgentLagSummaryConfigEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.1 | ColumnhmAgentLagSummaryLagIndex | read-only | current | Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.2 | ColumnhmAgentLagSummaryName | read-write | current | Agent LAG Name. The associated name of the LAG used during creation. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.3 | ColumnhmAgentLagSummaryFlushTimer | read-write | obsolete | Agent LAG FlushTimer. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.4 | ColumnhmAgentLagSummaryLinkTrap | read-write | current | Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.5 | ColumnhmAgentLagSummaryAdminMode | read-write | current | Agent LAG AdminMode. Administratively enables or disables this LAG interface. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.6 | ColumnhmAgentLagSummaryStpMode | read-write | current | Agent LAG StpMode. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.7 | ColumnhmAgentLagSummaryAddPort | read-write | current | Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: hmAgentPortType for the port to be … |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.8 | ColumnhmAgentLagSummaryDeletePort | read-write | current | Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.9 | ColumnhmAgentLagSummaryStatus | read-write | current | Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. |
| 1.3.6.1.4.1.248.15.1.2.2.2.1.10 | ColumnhmAgentLagSummaryType | read-only | current | Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained. |
| 1.3.6.1.4.1.248.15.1.2.2.3 | TablehmAgentLagDetailedConfigTable | not-accessible | current | A detailed table of the switch's LAG config entries |
| 1.3.6.1.4.1.248.15.1.2.2.3.1 | RowhmAgentLagDetailedConfigEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.248.15.1.2.2.3.1.1 | ColumnhmAgentLagDetailedLagIndex | read-only | current | LAG index |
| 1.3.6.1.4.1.248.15.1.2.2.3.1.2 | ColumnhmAgentLagDetailedIfIndex | read-only | current | LAG port index |
| 1.3.6.1.4.1.248.15.1.2.2.3.1.3 | ColumnhmAgentLagDetailedPortSpeed | read-only | current | LAG port speed. See hmAgentPortType for a description and list of valid values. |
| 1.3.6.1.4.1.248.15.1.2.2.3.1.4 | ColumnhmAgentLagDetailedPortStatus | read-only | current | LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG. |
| 1.3.6.1.4.1.248.15.1.2.2.4 | ScalarhmAgentLagConfigStaticCapability | read-write | current | Agent LAG Static Capability. Configures whether Static LAGs are supported on this device. |
| 1.3.6.1.4.1.248.15.1.2.7 | NodehmAgentSpanningTreeConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.7.1 | ScalarhmAgentSpanningTreeMode | read-write | current | The switch's Spanning Tree Switch Status |
| 1.3.6.1.4.1.248.15.1.2.8 | NodehmAgentSwitchConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.8.2 | ScalarhmAgentSwitchBroadcastControlMode | read-write | current | The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadca… |
| 1.3.6.1.4.1.248.15.1.2.8.3 | ScalarhmAgentSwitchDot3FlowControlMode | read-write | current | Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. |
| 1.3.6.1.4.1.248.15.1.2.8.4 | TablehmAgentSwitchAddressAgingTimeoutTable | not-accessible | current | The switch's address aging timeout table |
| 1.3.6.1.4.1.248.15.1.2.8.4.1 | RowhmAgentSwitchAddressAgingTimeoutEntry | not-accessible | current | Aging information about a specific Filtering Database. |
| 1.3.6.1.4.1.248.15.1.2.8.4.1.1 | ColumnhmAgentSwitchAddressAgingTimeout | read-write | current | The FDB entry's address aging timeout (in seconds) |
| 1.3.6.1.4.1.248.15.1.2.8.5 | TablehmAgentSwitchStaticMacFilteringTable | not-accessible | current | The switch's static Mac filtering table |
| 1.3.6.1.4.1.248.15.1.2.8.5.1 | RowhmAgentSwitchStaticMacFilteringEntry | not-accessible | current | Per-port ingress/egress filter configuration based on VLAN Id and MAC address. |
| 1.3.6.1.4.1.248.15.1.2.8.5.1.1 | ColumnhmAgentSwitchStaticMacFilteringVlanId | read-only | current | The Static MAC Filter Vlan Id |
| 1.3.6.1.4.1.248.15.1.2.8.5.1.2 | ColumnhmAgentSwitchStaticMacFilteringAddress | read-only | current | The Static MAC Filter MAC address |
| 1.3.6.1.4.1.248.15.1.2.8.5.1.3 | ColumnhmAgentSwitchStaticMacFilteringSourcePortMask | read-write | current | The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Con… |
| 1.3.6.1.4.1.248.15.1.2.8.5.1.4 | ColumnhmAgentSwitchStaticMacFilteringDestPortMask | read-write | current | The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports… |
| 1.3.6.1.4.1.248.15.1.2.8.5.1.5 | ColumnhmAgentSwitchStaticMacFilteringStatus | read-create | current | The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
| 1.3.6.1.4.1.248.15.1.2.8.6 | NodehmAgentSwitchIGMPSnoopingGroup | |||
| 1.3.6.1.4.1.248.15.1.2.8.6.1 | ScalarhmAgentSwitchIGMPSnoopingAdminMode | read-write | current | This enables or disables IGMP Snooping on the system. |
| 1.3.6.1.4.1.248.15.1.2.8.6.2 | ScalarhmAgentSwitchIGMPSnoopingGroupMembershipInterval | read-write | current | The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry. |
| 1.3.6.1.4.1.248.15.1.2.8.6.3 | ScalarhmAgentSwitchIGMPSnoopingMaxResponseTime | read-write | current | The amount of time in seconds a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that inter… |
| 1.3.6.1.4.1.248.15.1.2.8.6.4 | ScalarhmAgentSwitchIGMPSnoopingMRPExpirationTime | read-write | current | Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is r… |
| 1.3.6.1.4.1.248.15.1.2.8.6.5 | ScalarhmAgentSwitchIGMPSnoopingPortMask | read-write | current | IGMP Snooping Port Mask. This allows configuration of IGMP Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled… |
| 1.3.6.1.4.1.248.15.1.2.8.6.6 | ScalarhmAgentSwitchIGMPSnoopingMulticastControlFramesProcessed | read-only | current | Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU. |
| 1.3.6.1.4.1.248.15.1.2.8.7 | NodehmAgentSwitchMFDBGroup | |||
| 1.3.6.1.4.1.248.15.1.2.8.7.1 | TablehmAgentSwitchMFDBTable | not-accessible | current | The Multicast Forwarding Database table |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1 | RowhmAgentSwitchMFDBEntry | not-accessible | current | Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User. |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.1 | ColumnhmAgentSwitchMFDBVlanId | read-only | current | Vlan Index for which this entry is associated with. |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.2 | ColumnhmAgentSwitchMFDBMacAddress | read-only | current | A multicast MAC address for which the switch has forwarding and or filtering information. |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.3 | ColumnhmAgentSwitchMFDBProtocolType | read-only | current | The component that is responsible for this entry in the Multicast Forwarding Database. |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.4 | ColumnhmAgentSwitchMFDBType | read-only | current | This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.5 | ColumnhmAgentSwitchMFDBDescription | read-only | current | Text description of this multicast table entry. |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.6 | ColumnhmAgentSwitchMFDBForwardingPortMask | read-only | current | BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects hmAgentPortDot1dBasePor… |
| 1.3.6.1.4.1.248.15.1.2.8.7.1.1.7 | ColumnhmAgentSwitchMFDBFilteringPortMask | read-only | current | BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects hmAgentPortDot1dBasePort… |
| 1.3.6.1.4.1.248.15.1.2.8.7.2 | TablehmAgentSwitchMFDBSummaryTable | not-accessible | current | The Multicast Forwarding Database Summary table |
| 1.3.6.1.4.1.248.15.1.2.8.7.2.1 | RowhmAgentSwitchMFDBSummaryEntry | not-accessible | current | Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address. |
| 1.3.6.1.4.1.248.15.1.2.8.7.2.1.1 | ColumnhmAgentSwitchMFDBSummaryVlanId | read-only | current | Vlan Index for which this entry is associated with. |
| 1.3.6.1.4.1.248.15.1.2.8.7.2.1.2 | ColumnhmAgentSwitchMFDBSummaryMacAddress | read-only | current | A multicast MAC address for which the switch has forwarding and or filtering information. |
| 1.3.6.1.4.1.248.15.1.2.8.7.2.1.3 | ColumnhmAgentSwitchMFDBSummaryForwardingPortMask | read-only | current | Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects hmAgentPortDot1dBaseP… |
| 1.3.6.1.4.1.248.15.1.2.8.7.3 | ScalarhmAgentSwitchMFDBMaxTableEntries | read-only | current | This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table. |
| 1.3.6.1.4.1.248.15.1.2.8.7.4 | ScalarhmAgentSwitchMFDBMostEntriesUsed | read-only | current | This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water … |
| 1.3.6.1.4.1.248.15.1.2.8.7.5 | ScalarhmAgentSwitchMFDBCurrentEntries | read-only | current | This displays the current number of entries in the Multicast Forwarding Database table. |
| 1.3.6.1.4.1.248.15.1.2.8.8 | NodehmAgentSwitchDVlanTagGroup | |||
| 1.3.6.1.4.1.248.15.1.2.8.8.1 | ScalarhmAgentSwitchDVlanTagEthertype | read-write | current | Configures the Double Vlan Tag Ethertype for the switch. If this object is supported, ethertype cannot be configured per port. Commonly used are the Ethertypes… |
| 1.3.6.1.4.1.248.15.1.2.8.25 | NodehmAgentSwitchVoiceVLANGroup | |||
| 1.3.6.1.4.1.248.15.1.2.8.25.1 | ScalarhmAgentSwitchVoiceVLANAdminMode | read-write | current | This enables or disables Voice VLAN on the system. |
| 1.3.6.1.4.1.248.15.1.2.8.25.2 | TablehmAgentSwitchVoiceVlanDeviceTable | not-accessible | current | A table of the Voice Vlan device entries. |
| 1.3.6.1.4.1.248.15.1.2.8.25.2.1 | RowhmAgentSwitchVoiceVlanDeviceEntry | not-accessible | current | Represents entry for a Voice Device on the interface. |
| 1.3.6.1.4.1.248.15.1.2.8.25.2.1.1 | ColumnhmAgentSwitchVoiceVlanInterfaceNum | read-only | current | The interface number of this interface. |
| 1.3.6.1.4.1.248.15.1.2.8.25.2.1.2 | ColumnhmAgentSwitchVoiceVlanDeviceMacAddress | read-only | current | The Voice Device Mac address |
| 1.3.6.1.4.1.248.15.1.2.9 | NodehmAgentTransferConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.9.1 | NodehmAgentTransferUploadGroup | |||
| 1.3.6.1.4.1.248.15.1.2.9.1.1 | ScalarhmAgentTransferUploadMode | read-write | current | Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file t… |
| 1.3.6.1.4.1.248.15.1.2.9.1.2 | ScalarhmAgentTransferUploadServerIP | read-write | current | Transfer upload tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is… |
| 1.3.6.1.4.1.248.15.1.2.9.1.3 | ScalarhmAgentTransferUploadPath | read-write | current | Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. |
| 1.3.6.1.4.1.248.15.1.2.9.1.4 | ScalarhmAgentTransferUploadFilename | read-write | current | Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remem… |
| 1.3.6.1.4.1.248.15.1.2.9.1.5 | ScalarhmAgentTransferUploadDataType | read-write | current | Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap… |
| 1.3.6.1.4.1.248.15.1.2.9.1.6 | ScalarhmAgentTransferUploadStart | read-write | current | Transfer upload start will start an upload transfer. The hmAgentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a t… |
| 1.3.6.1.4.1.248.15.1.2.9.1.7 | ScalarhmAgentTransferUploadStatus | read-only | current | Indicates the current status of an upload transfer. |
| 1.3.6.1.4.1.248.15.1.2.9.2 | NodehmAgentTransferDownloadGroup | |||
| 1.3.6.1.4.1.248.15.1.2.9.2.1 | ScalarhmAgentTransferDownloadMode | read-write | current | Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file… |
| 1.3.6.1.4.1.248.15.1.2.9.2.2 | ScalarhmAgentTransferDownloadServerIP | read-write | current | Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address … |
| 1.3.6.1.4.1.248.15.1.2.9.2.3 | ScalarhmAgentTransferDownloadPath | read-write | current | Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used. |
| 1.3.6.1.4.1.248.15.1.2.9.2.4 | ScalarhmAgentTransferDownloadFilename | read-write | current | Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch rem… |
| 1.3.6.1.4.1.248.15.1.2.9.2.5 | ScalarhmAgentTransferDownloadDataType | read-write | current | Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File |
| 1.3.6.1.4.1.248.15.1.2.9.2.6 | ScalarhmAgentTransferDownloadStart | read-write | current | Transfer download start will start an download transfer. The hmAgentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initia… |
| 1.3.6.1.4.1.248.15.1.2.9.2.7 | ScalarhmAgentTransferDownloadStatus | read-only | current | Indicates the current status of an download transfer. |
| 1.3.6.1.4.1.248.15.1.2.10 | NodehmAgentPortMirroringGroup | |||
| 1.3.6.1.4.1.248.15.1.2.10.1 | ScalarhmAgentMirroredPortIfIndex | read-write | obsolete | IfIndex of the mirrored port |
| 1.3.6.1.4.1.248.15.1.2.10.2 | ScalarhmAgentProbePortIfIndex | read-write | obsolete | IfIndex of the probe port |
| 1.3.6.1.4.1.248.15.1.2.10.3 | ScalarhmAgentPortMirroringMode | read-write | obsolete | Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration |
| 1.3.6.1.4.1.248.15.1.2.10.4 | TablehmAgentPortMirrorTable | not-accessible | current | This table includes entries for each Port Mirroring session. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1 | RowhmAgentPortMirrorEntry | not-accessible | current | Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.1 | ColumnhmAgentPortMirrorSessionNum | not-accessible | current | The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.2 | ColumnhmAgentPortMirrorDestinationPort | read-write | current | The port which traffic from the mirrored ports will be sent to. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.3 | ColumnhmAgentPortMirrorSourcePortMask | read-write | current | The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.4 | ColumnhmAgentPortMirrorAdminMode | read-write | current | The status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. d… |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.248 | ColumnhmAgentPortMirrorIngressMask | read-write | current | The ports from which ingress traffic will be mirrored. |
| 1.3.6.1.4.1.248.15.1.2.10.4.1.249 | ColumnhmAgentPortMirrorEgressMask | read-write | current | The ports from which egress traffic will be mirrored. |
| 1.3.6.1.4.1.248.15.1.2.12 | TablehmAgentDot3adAggPortTable | not-accessible | current | This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB. |
| 1.3.6.1.4.1.248.15.1.2.12.1 | RowhmAgentDot3adAggPortEntry | not-accessible | current | Information about a table entry. The hmAgentDot3adAggPort identifies the external interface number of the port. |
| 1.3.6.1.4.1.248.15.1.2.12.1.1 | ColumnhmAgentDot3adAggPort | read-only | current | ifIndex of this physical port |
| 1.3.6.1.4.1.248.15.1.2.12.1.2 | ColumnhmAgentDot3adAggPortLACPMode | read-write | current | Enable/disable 802.3ad LACP on this port |
| 1.3.6.1.4.1.248.15.1.2.13 | TablehmAgentPortConfigTable | not-accessible | current | A table of the switch's physical port config entries |
| 1.3.6.1.4.1.248.15.1.2.13.1 | RowhmAgentPortConfigEntry | not-accessible | current | Switch's physical port config entry |
| 1.3.6.1.4.1.248.15.1.2.13.1.1 | ColumnhmAgentPortDot1dBasePort | read-only | current | The port number of this port. |
| 1.3.6.1.4.1.248.15.1.2.13.1.2 | ColumnhmAgentPortIfIndex | read-only | current | The switch's Port IfIndex |
| 1.3.6.1.4.1.248.15.1.2.13.1.3 | ColumnhmAgentPortIanaType | read-only | current | The switch's Port Type |
| 1.3.6.1.4.1.248.15.1.2.13.1.4 | ColumnhmAgentPortSTPMode | read-write | current | The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicat… |
| 1.3.6.1.4.1.248.15.1.2.13.1.5 | ColumnhmAgentPortSTPState | read-only | current | The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. |
| 1.3.6.1.4.1.248.15.1.2.13.1.6 | ColumnhmAgentPortAdminMode | read-write | current | The switch's Port Admin Mode |
| 1.3.6.1.4.1.248.15.1.2.13.1.7 | ColumnhmAgentPortPhysicalMode | read-write | obsolete | The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports |
| 1.3.6.1.4.1.248.15.1.2.13.1.8 | ColumnhmAgentPortPhysicalStatus | read-only | obsolete | The switch's Port Physical Speed Status. This is the current actual speed. |
| 1.3.6.1.4.1.248.15.1.2.13.1.9 | ColumnhmAgentPortLinkTrapMode | read-write | current | If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.248.15.1.2.13.1.10 | ColumnhmAgentPortClearStats | read-write | current | clear stats for this port only |
| 1.3.6.1.4.1.248.15.1.2.13.1.11 | ColumnhmAgentPortDefaultType | read-write | current | This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by hmAgentPortType. The set of po… |
| 1.3.6.1.4.1.248.15.1.2.13.1.13 | ColumnhmAgentPortAutoNegAdminStatus | read-write | current | This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.248.15.1.2.13.1.14 | ColumnhmAgentPortDot3FlowControlMode | read-write | current | Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. |
| 1.3.6.1.4.1.248.15.1.2.13.1.15 | ColumnhmAgentPortDVlanTagMode | read-write | current | Controls the Double Vlan Tag mode on this port. Default is normal(2). |
| 1.3.6.1.4.1.248.15.1.2.13.1.16 | ColumnhmAgentPortDVlanTagEthertype | read-write | current | Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are … |
| 1.3.6.1.4.1.248.15.1.2.13.1.17 | ColumnhmAgentPortDVlanTagCustomerId | read-write | current | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.248.15.1.2.13.1.18 | ColumnhmAgentPortMaxFrameSizeLimit | read-only | current | This object identifies the largest value that can be configured for hmAgentPortMaxFrameSize |
| 1.3.6.1.4.1.248.15.1.2.13.1.19 | ColumnhmAgentPortMaxFrameSize | read-write | current | This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of hmAge… |
| 1.3.6.1.4.1.248.15.1.2.13.1.20 | ColumnhmAgentPortVoiceVlanMode | read-write | current | Describes and Configures the Port Voice VLAN Mode. |
| 1.3.6.1.4.1.248.15.1.2.13.1.21 | ColumnhmAgentPortVoiceVlanID | read-write | current | Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID. |
| 1.3.6.1.4.1.248.15.1.2.13.1.22 | ColumnhmAgentPortVoiceVlanPriority | read-write | current | Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured. |
| 1.3.6.1.4.1.248.15.1.2.13.1.23 | ColumnhmAgentPortVoiceVlanDataPriorityMode | read-write | current | Describes and Configures the Port Voice VLAN Data Priority Mode. |
| 1.3.6.1.4.1.248.15.1.2.13.1.24 | ColumnhmAgentPortVoiceVlanOperationalStatus | read-only | current | Describes the Port Voice VLAN Operational Status. |
| 1.3.6.1.4.1.248.15.1.2.13.1.25 | ColumnhmAgentPortVoiceVlanDSCP | read-write | current | Describes and Configures the Port Voice VLAN DSCP value. |
| 1.3.6.1.4.1.248.15.1.2.13.1.26 | ColumnhmAgentPortVoiceVlanAuthMode | read-write | current | Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled. |
| 1.3.6.1.4.1.248.15.1.2.14 | NodehmAgentProtocolConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.14.1 | ScalarhmAgentProtocolGroupCreate | read-write | current | Set to non-empty string to create a Protocol-Based VLAN group. |
| 1.3.6.1.4.1.248.15.1.2.14.2 | TablehmAgentProtocolGroupTable | not-accessible | current | A table of the switch's Protocol-based VLAN entries |
| 1.3.6.1.4.1.248.15.1.2.14.2.1 | RowhmAgentProtocolGroupEntry | not-accessible | current | Switch's Protocol-based VLAN entry |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.1 | ColumnhmAgentProtocolGroupId | read-only | current | Group identifier of the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.2 | ColumnhmAgentProtocolGroupName | read-only | current | Group name of the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.3 | ColumnhmAgentProtocolGroupVlanId | read-write | current | VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.4 | ColumnhmAgentProtocolGroupProtocolIP | read-write | current | The status of the IP protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.5 | ColumnhmAgentProtocolGroupProtocolARP | read-write | current | The status of the ARP protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.6 | ColumnhmAgentProtocolGroupProtocolIPX | read-write | current | The status of the IPX protocol association with the Protocol-based VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.14.2.1.7 | ColumnhmAgentProtocolGroupStatus | read-write | current | The status of the Protocol-based VLAN entry. active(1) - this entry is active destroy(6) - remove this entry |
| 1.3.6.1.4.1.248.15.1.2.14.3 | TablehmAgentProtocolGroupPortTable | not-accessible | current | A table of the switch's physical port config entries |
| 1.3.6.1.4.1.248.15.1.2.14.3.1 | RowhmAgentProtocolGroupPortEntry | not-accessible | current | Switch's physical port config entry |
| 1.3.6.1.4.1.248.15.1.2.14.3.1.1 | ColumnhmAgentProtocolGroupPortIfIndex | read-only | current | The interface number of this instance. |
| 1.3.6.1.4.1.248.15.1.2.14.3.1.2 | ColumnhmAgentProtocolGroupPortStatus | read-create | current | The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to thi… |
| 1.3.6.1.4.1.248.15.1.2.15 | NodehmAgentStpSwitchConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.15.1 | ScalarhmAgentStpConfigDigestKey | read-only | current | The MST configuration digest key. |
| 1.3.6.1.4.1.248.15.1.2.15.2 | ScalarhmAgentStpConfigFormatSelector | read-only | current | The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard. |
| 1.3.6.1.4.1.248.15.1.2.15.3 | ScalarhmAgentStpConfigName | read-write | current | The MST configuration name of at most 32 characters. |
| 1.3.6.1.4.1.248.15.1.2.15.4 | ScalarhmAgentStpConfigRevision | read-write | current | The MST configuration revision. The default value is 1. |
| 1.3.6.1.4.1.248.15.1.2.15.5 | ScalarhmAgentStpForceVersion | read-write | current | The MST configuration force protocol version. The default version is dot1w. |
| 1.3.6.1.4.1.248.15.1.2.15.6 | ScalarhmAgentStpAdminMode | read-write | current | The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational statu… |
| 1.3.6.1.4.1.248.15.1.2.15.7 | TablehmAgentStpPortTable | not-accessible | current | STP port table. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1 | RowhmAgentStpPortEntry | not-accessible | current | STP port entry. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.1 | ColumnhmAgentStpPortState | read-write | current | The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled fo… |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.2 | ColumnhmAgentStpPortStatsMstpBpduRx | read-only | current | The MSTP BPDUs received on a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.3 | ColumnhmAgentStpPortStatsMstpBpduTx | read-only | current | The MSTP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.4 | ColumnhmAgentStpPortStatsRstpBpduRx | read-only | current | The RSTP BPDUs received on a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.5 | ColumnhmAgentStpPortStatsRstpBpduTx | read-only | current | The RSTP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.6 | ColumnhmAgentStpPortStatsStpBpduRx | read-only | current | The STP BPDUs received on a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.7 | ColumnhmAgentStpPortStatsStpBpduTx | read-only | current | The STP BPDUs sent from a specific port. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.8 | ColumnhmAgentStpPortUpTime | read-only | current | Time since port was reset. It is displayed in days, hours, minutes, and seconds. |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.9 | ColumnhmAgentStpPortMigrationCheck | read-write | current | Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A… |
| 1.3.6.1.4.1.248.15.1.2.15.7.1.10 | ColumnhmAgentStpPortHelloTime | read-write | current | Hello time for the STP port. The default value is 2. |
| 1.3.6.1.4.1.248.15.1.2.15.8 | NodehmAgentStpCstConfigGroup | |||
| 1.3.6.1.4.1.248.15.1.2.15.8.1 | ScalarhmAgentStpCstHelloTime | read-only | current | The MSTP root port hello time for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.2 | ScalarhmAgentStpCstMaxAge | read-only | current | The MSTP root port max age for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.3 | ScalarhmAgentStpCstRegionalRootId | read-only | current | The MSTP regional root identifier for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.4 | ScalarhmAgentStpCstRegionalRootPathCost | read-only | current | The MSTP regional root path cost for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.5 | ScalarhmAgentStpCstRootFwdDelay | read-only | current | The MSTP root port forward delay for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.6 | ScalarhmAgentStpCstBridgeFwdDelay | read-write | current | The MSTP bridge forward delay for the CIST. The default value is 15. |
| 1.3.6.1.4.1.248.15.1.2.15.8.7 | ScalarhmAgentStpCstBridgeHelloTime | read-write | current | The MSTP bridge hello time for the CIST. The default value is 2. |
| 1.3.6.1.4.1.248.15.1.2.15.8.8 | ScalarhmAgentStpCstBridgeHoldTime | read-only | current | The MSTP bridge hold time for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.8.9 | ScalarhmAgentStpCstBridgeMaxAge | read-write | current | The MSTP bridge max age for the CIST. The default value is 20. |
| 1.3.6.1.4.1.248.15.1.2.15.8.10 | ScalarhmAgentStpCstBridgeDesignatedRoot | read-only | current | The Designated Root like in dot1dStpDesignatedRoot. |
| 1.3.6.1.4.1.248.15.1.2.15.8.11 | ScalarhmAgentStpCstBridgePriority | read-write | current | The MSTP bridge priority for the CIST. The default value is 32768. |
| 1.3.6.1.4.1.248.15.1.2.15.8.12 | ScalarhmAgentStpCstBridgeTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.248.15.1.2.15.8.13 | ScalarhmAgentStpCstBridgeTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.248.15.1.2.15.8.14 | ScalarhmAgentStpCstBridgeRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.248.15.1.2.15.8.15 | ScalarhmAgentStpCstBridgeRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.248.15.1.2.15.8.16 | ScalarhmAgentStpCstBridgeMaxHops | read-write | current | The MSTP bridge max hops for the CIST. The default value is 20. |
| 1.3.6.1.4.1.248.15.1.2.15.8.17 | ScalarhmAgentStpCstBridgeHoldCount | read-write | current | The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default … |
| 1.3.6.1.4.1.248.15.1.2.15.9 | TablehmAgentStpCstPortTable | not-accessible | current | CIST port table. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1 | RowhmAgentStpCstPortEntry | not-accessible | current | CIST port entry. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.1 | ColumnhmAgentStpCstPortOperEdge | read-only | current | The MSTP operational status of a specific port for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.2 | ColumnhmAgentStpCstPortOperPointToPoint | read-only | current | The MSTP operational point to point mac of a specific port for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.3 | ColumnhmAgentStpCstPortTopologyChangeAck | read-only | current | The MSTP topology change acknowledge for a specific port in the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.4 | ColumnhmAgentStpCstPortEdge | read-write | current | The administrative state of a specific port in CIST. true(1) - port is edge port. false(2) - port is auto-edge or no edge port. The default port state is disab… |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.5 | ColumnhmAgentStpCstPortForwardingState | read-only | current | The MSTP forwarding state of a specific port in CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.6 | ColumnhmAgentStpCstPortId | read-only | current | The MSTP port identifier of a specific port in CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.7 | ColumnhmAgentStpCstPortPathCost | read-write | current | The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link s… |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.8 | ColumnhmAgentStpCstPortPriority | read-write | current | The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.9 | ColumnhmAgentStpCstDesignatedBridgeId | read-only | current | The MSTP designated bridge ID of a specific port in CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.10 | ColumnhmAgentStpCstDesignatedCost | read-only | current | The MSTP designated cost of a specific port in CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.11 | ColumnhmAgentStpCstDesignatedPortId | read-only | current | The MSTP designated port ID of a specific port in CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.12 | ColumnhmAgentStpCstExtPortPathCost | read-write | current | The MSTP external port path cost in CIST. The default value varies depending upon the link speed. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.13 | ColumnhmAgentStpCstPortAutoEdge | read-write | current | The auto edge state of a specific port in CIST. true(1) - enables the port. false(2) - disables the port. The default port state is enabled. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.14 | ColumnhmAgentStpCstPortRole | read-only | current | The current Port Role for the Port (i.e., Root, Alternate, Designated, or Backup), for the CIST. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.15 | ColumnhmAgentStpCstPortDisputed | read-only | current | The current value of the disputed variable for the CIST for the Port. A value of true(1) indicates that the disputed variable is set. A value of false(2) indic… |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.16 | ColumnhmAgentStpCstPortBpduGuardEffect | read-only | current | BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.17 | ColumnhmAgentStpCstPortBpduFilter | read-write | current | This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.18 | ColumnhmAgentStpCstPortBpduFlood | read-write | current | This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port. |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.19 | ColumnhmAgentStpCstPortRootGuard | read-write | current | This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put i… |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.20 | ColumnhmAgentStpCstPortTCNGuard | read-write | current | This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the por… |
| 1.3.6.1.4.1.248.15.1.2.15.9.1.21 | ColumnhmAgentStpCstPortLoopGuard | read-write | current | This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop … |
| 1.3.6.1.4.1.248.15.1.2.15.10 | TablehmAgentStpMstTable | not-accessible | current | MST table. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1 | RowhmAgentStpMstEntry | not-accessible | current | MST entry. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.1 | ColumnhmAgentStpMstId | read-only | current | The MSTP instance ID. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.2 | ColumnhmAgentStpMstBridgePriority | read-write | current | The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.3 | ColumnhmAgentStpMstBridgeIdentifier | read-only | current | The MSTP bridge identifier in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.4 | ColumnhmAgentStpMstDesignatedRootId | read-only | current | The MSTP designated root bridge identifier in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.5 | ColumnhmAgentStpMstRootPathCost | read-only | current | The MSTP root path cost in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.6 | ColumnhmAgentStpMstRootPortId | read-only | current | The MSTP root port ID in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.7 | ColumnhmAgentStpMstTimeSinceTopologyChange | read-only | current | The MSTP time since the last topology change in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.8 | ColumnhmAgentStpMstTopologyChangeCount | read-only | current | The MSTP count of topology changes in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.9 | ColumnhmAgentStpMstTopologyChangeParm | read-only | current | The MSTP topology change parameter in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.10.1.10 | ColumnhmAgentStpMstRowStatus | read-create | current | The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11 | TablehmAgentStpMstPortTable | not-accessible | current | MST port table. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1 | RowhmAgentStpMstPortEntry | not-accessible | current | MST port entry. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.1 | ColumnhmAgentStpMstPortForwardingState | read-only | current | The MSTP forwarding state of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.2 | ColumnhmAgentStpMstPortId | read-only | current | The MSTP port identifier of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.3 | ColumnhmAgentStpMstPortPathCost | read-write | current | The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depend… |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.4 | ColumnhmAgentStpMstPortPriority | read-write | current | The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.5 | ColumnhmAgentStpMstDesignatedBridgeId | read-only | current | The MSTP designated bridge ID of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.6 | ColumnhmAgentStpMstDesignatedCost | read-only | current | The MSTP designated cost of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.7 | ColumnhmAgentStpMstDesignatedPortId | read-only | current | The MSTP designated port ID of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.8 | ColumnhmAgentStpMstPortRole | read-only | current | In an MSTP Bridge, the current Port Role for the Port (i.e., Root, Alternate, Designated, or Backup), for the MSTI. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.9 | ColumnhmAgentStpMstPortDisputed | read-only | current | In an MSTP Bridge, the current value of the disputed variable for the MSTI for the Port. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.10 | ColumnhmAgentStpMstPortLoopInconsistentState | read-only | current | The loop inconsistent state of a specific port in a specific instance. This value can only report as true(1) when loop guard is enabled on the port and the por… |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.11 | ColumnhmAgentStpMstPortTransitionsIntoLoopInconsistentState | read-only | current | The number of times this interface has transitioned into loop inconsistent state. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.12 | ColumnhmAgentStpMstPortTransitionsOutOfLoopInconsistentState | read-only | current | The number of times this interface has transitioned out of loop inconsistent state. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.13 | ColumnhmAgentStpMstReceivedBridgeId | read-only | current | The MSTP received bridge ID on a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.14 | ColumnhmAgentStpMstReceivedRPC | read-only | current | The MSTP received root path cost of a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.11.1.15 | ColumnhmAgentStpMstReceivedPortId | read-only | current | The MSTP received port ID on a specific port in a specific instance. |
| 1.3.6.1.4.1.248.15.1.2.15.12 | TablehmAgentStpMstVlanTable | not-accessible | current | MST VLAN table. |
| 1.3.6.1.4.1.248.15.1.2.15.12.1 | RowhmAgentStpMstVlanEntry | not-accessible | current | MST VLAN entry. |
| 1.3.6.1.4.1.248.15.1.2.15.12.1.1 | ColumnhmAgentStpMstVlanRowStatus | read-create | current | The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - us… |
| 1.3.6.1.4.1.248.15.1.2.15.13 | ScalarhmAgentStpBpduGuardMode | read-write | current | The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status i… |
| 1.3.6.1.4.1.248.15.1.2.15.14 | ScalarhmAgentStpBpduFilterDefault | read-write | current | The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Fi… |
| 1.3.6.1.4.1.248.15.1.2.17 | NodehmAgentClassOfServiceGroup | |||
| 1.3.6.1.4.1.248.15.1.2.17.1 | TablehmAgentClassOfServicePortTable | not-accessible | current | A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port. |
| 1.3.6.1.4.1.248.15.1.2.17.1.1 | RowhmAgentClassOfServicePortEntry | not-accessible | current | A 802.1p priority mapped to a traffic class priority queue. |
| 1.3.6.1.4.1.248.15.1.2.17.1.1.1 | ColumnhmAgentClassOfServicePortPriority | not-accessible | current | The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated … |
| 1.3.6.1.4.1.248.15.1.2.17.1.1.2 | ColumnhmAgentClassOfServicePortClass | read-write | current | Traffic class priority queue the received frame is mapped to. The possible range depends on the number of supported traffic classes for the appropriate port, a… |
| 1.3.6.1.4.1.248.15.1.3 | NodehmAgentSystemGroup | |||
| 1.3.6.1.4.1.248.15.1.3.1 | ScalarhmAgentSaveConfig | read-write | current | Enable hmAgentSaveConfig will initiate an configuration save to nvram. Disable hmAgentSaveConfig after a configuration save will reset hmAgentSaveConfigStatus … |
| 1.3.6.1.4.1.248.15.1.3.2 | ScalarhmAgentClearConfig | read-write | current | clear config to factory defaults |
| 1.3.6.1.4.1.248.15.1.3.3 | ScalarhmAgentClearLags | read-write | current | clear lag configuration |
| 1.3.6.1.4.1.248.15.1.3.4 | ScalarhmAgentClearLoginSessions | read-write | current | close all telnet sessions |
| 1.3.6.1.4.1.248.15.1.3.5 | ScalarhmAgentClearPasswords | read-write | current | reset passwords |
| 1.3.6.1.4.1.248.15.1.3.6 | ScalarhmAgentClearPortStats | read-write | current | clear all port statistics |
| 1.3.6.1.4.1.248.15.1.3.7 | ScalarhmAgentClearSwitchStats | read-write | current | clear all switch statistics |
| 1.3.6.1.4.1.248.15.1.3.8 | ScalarhmAgentClearTrapLog | read-write | current | clear trap log |
| 1.3.6.1.4.1.248.15.1.3.9 | ScalarhmAgentClearVlan | read-write | current | clear vlan entries |
| 1.3.6.1.4.1.248.15.1.3.10 | ScalarhmAgentResetSystem | read-write | current | reset the switch |
| 1.3.6.1.4.1.248.15.1.3.11 | ScalarhmAgentSaveConfigStatus | read-only | current | Indicates the current status of an save configuration request. |
| 1.3.6.1.4.1.248.15.1.4 | NodehmAgentCableTesterGroup | |||
| 1.3.6.1.4.1.248.15.1.4.1 | ScalarhmAgentCableTesterStatus | read-write | current | Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed.… |
| 1.3.6.1.4.1.248.15.1.4.2 | ScalarhmAgentCableTesterIfIndex | read-write | current | Determines on which port to perform the cable test. Limited to copper based ports. |
| 1.3.6.1.4.1.248.15.1.4.3 | ScalarhmAgentCableTesterCableStatus | read-only | current | Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(… |
| 1.3.6.1.4.1.248.15.1.4.4 | ScalarhmAgentCableTesterMinimumCableLength | read-only | current | The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if hmAgentCableTesterStatus is not s… |
| 1.3.6.1.4.1.248.15.1.4.5 | ScalarhmAgentCableTesterMaximumCableLength | read-only | current | The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if hmAgentCableTesterStatus is not su… |
| 1.3.6.1.4.1.248.15.1.4.6 | ScalarhmAgentCableTesterCableFailureLocation | read-only | current | The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if hmAgentCableTesterStatus is not success(2). |
| 1.3.6.1.4.1.248.15.1.50 | NodehmPlatform4SwitchingTraps | |||
| 1.3.6.1.4.1.248.15.1.50.1 | NotificationmultipleUsersTrap | current | This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface. | |
| 1.3.6.1.4.1.248.15.1.50.2 | NotificationbroadcastStormStartTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.3 | NotificationbroadcastStormEndTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.4 | NotificationlinkFailureTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.5 | NotificationvlanRequestFailureTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.6 | NotificationvlanDeleteLastTrap | current | Trap is sent when attempting to delete the last configured VLAN or the Default VLAN. | |
| 1.3.6.1.4.1.248.15.1.50.7 | NotificationvlanDefaultCfgFailureTrap | current | Trap is sent if there are failures in resetting VLAN configuration to defaults. | |
| 1.3.6.1.4.1.248.15.1.50.8 | NotificationvlanRestoreFailureTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.9 | NotificationfanFailureTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.10 | NotificationstpInstanceNewRootTrap | current | Trap is sent when this machine is a new STP Root when there is more than one STP instance. | |
| 1.3.6.1.4.1.248.15.1.50.11 | NotificationstpInstanceTopologyChangeTrap | current | Trap is sent when there is a STP topology change when there is more than one STP instance. | |
| 1.3.6.1.4.1.248.15.1.50.12 | NotificationpowerSupplyStatusChangeTrap | obsolete | Trap is obsolete. | |
| 1.3.6.1.4.1.248.15.1.50.13 | NotificationfailedUserLoginTrap | current | Trap is sent when a user fails to authenticate via the CLI or Web interfaces. | |
| 1.3.6.1.4.1.248.15.8 | NodehmRadius | |||
| 1.3.6.1.4.1.248.15.8.1 | NodehmAgentRadiusConfigGroup | |||
| 1.3.6.1.4.1.248.15.8.1.1 | ScalarhmAgentRadiusMaxTransmit | read-write | current | Maximum number of retransmissions of a RADIUS request packet |
| 1.3.6.1.4.1.248.15.8.1.2 | ScalarhmAgentRadiusTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted |
| 1.3.6.1.4.1.248.15.8.1.3 | ScalarhmAgentRadiusAccountingMode | read-write | current | Identifies if RADIUS Accounting has been enabled or not |
| 1.3.6.1.4.1.248.15.8.1.4 | ScalarhmAgentRadiusStatsClear | read-write | current | When set to enable(1), all Radius statistics will be reset. |
| 1.3.6.1.4.1.248.15.8.1.5 | ScalarhmAgentRadiusAccountingIndexNextValid | read-only | current | Indicates the next valid index into the hmAgentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.248.15.8.1.6 | TablehmAgentRadiusAccountingConfigTable | not-accessible | current | Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time. |
| 1.3.6.1.4.1.248.15.8.1.6.1 | RowhmAgentRadiusAccountingConfigEntry | not-accessible | current | Entry consisting of configuration data for a Radius Accounting Server. |
| 1.3.6.1.4.1.248.15.8.1.6.1.1 | ColumnhmAgentRadiusAccountingServerIndex | not-accessible | current | Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by hmAgentRadiusAccountingIndexNextValid. |
| 1.3.6.1.4.1.248.15.8.1.6.1.2 | ColumnhmAgentRadiusAccountingServerAddress | read-create | current | IP Address of the configured RADIUS accounting server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.15.8.1.6.1.3 | ColumnhmAgentRadiusAccountingPort | read-write | current | Port number for the RADIUS accounting server. |
| 1.3.6.1.4.1.248.15.8.1.6.1.4 | ColumnhmAgentRadiusAccountingSecret | read-write | current | Configured shared sercret for the RADIUS accounting server. |
| 1.3.6.1.4.1.248.15.8.1.6.1.5 | ColumnhmAgentRadiusAccountingStatus | read-create | current | Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the hmAgentRadiusAccountingIndexNextValid objec… |
| 1.3.6.1.4.1.248.15.8.1.7 | ScalarhmAgentRadiusServerIndexNextValid | read-only | current | Indicates the next valid index into the hmAgentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.248.15.8.1.8 | TablehmAgentRadiusServerConfigTable | not-accessible | current | Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret |
| 1.3.6.1.4.1.248.15.8.1.8.1 | RowhmAgentRadiusServerConfigEntry | not-accessible | current | Entry consisting of configuration data for a Radius Authentication Server. |
| 1.3.6.1.4.1.248.15.8.1.8.1.1 | ColumnhmAgentRadiusServerIndex | not-accessible | current | Unique index of the configured RADIUS server |
| 1.3.6.1.4.1.248.15.8.1.8.1.2 | ColumnhmAgentRadiusServerAddress | read-create | current | IP Address of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.15.8.1.8.1.3 | ColumnhmAgentRadiusServerPort | read-write | current | Port number for the RADIUS server. |
| 1.3.6.1.4.1.248.15.8.1.8.1.4 | ColumnhmAgentRadiusServerSecret | read-write | current | Configured shared sercret for the RADIUS server. |
| 1.3.6.1.4.1.248.15.8.1.8.1.5 | ColumnhmAgentRadiusServerPrimaryMode | read-write | current | Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server… |
| 1.3.6.1.4.1.248.15.8.1.8.1.6 | ColumnhmAgentRadiusServerCurrentMode | read-only | current | Indicate if the RADIUS server is the current server in user for authentication. |
| 1.3.6.1.4.1.248.15.8.1.8.1.7 | ColumnhmAgentRadiusServerMsgAuth | read-write | current | Enable or disable the message authenticator attribute for this RADIUS server. |
| 1.3.6.1.4.1.248.15.8.1.8.1.8 | ColumnhmAgentRadiusServerStatus | read-create | current | Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the hmAgentRadiusServerIndexNextValid objec… |
| 1.3.6.1.4.1.248.15.11 | NodehmAgentMgmtSecurity | |||
| 1.3.6.1.4.1.248.15.11.2 | NodehmAgentSSHConfigGroup | |||
| 1.3.6.1.4.1.248.15.11.2.1 | ScalarhmAgentSSHAdminMode | read-write | current | Configures whether the SSH service is enabled on this switch. The default value is disable(2). |
| 1.3.6.1.4.1.248.15.11.2.2 | ScalarhmAgentSSHProtocolLevel | read-write | current | Configures which protocol versions of SSH are enabled on this switch. The default value is both(3). |
| 1.3.6.1.4.1.248.15.11.2.3 | ScalarhmAgentSSHSessionsCount | read-only | current | Current number of active SSH sessions on this switch. |
| 1.3.6.1.4.1.248.15.11.2.4 | ScalarhmAgentSSHMaxSessionsCount | read-write | current | Max number of SSH sessions permitted on this switch. |
| 1.3.6.1.4.1.248.15.11.2.5 | ScalarhmAgentSSHSessionTimeout | read-write | current | ssh idle timeout value for this switch im minutes. |
| 1.3.6.1.4.1.248.15.14 | NodehmAgentLogging | |||
| 1.3.6.1.4.1.248.15.14.1 | NodehmAgentLogConfigGroup | |||
| 1.3.6.1.4.1.248.15.14.1.4 | NodehmAgentLogSysLogConfigGroup | |||
| 1.3.6.1.4.1.248.15.14.1.4.1 | ScalarhmAgentLogSyslogAdminStatus | read-write | current | For Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts. |
| 1.3.6.1.4.1.248.15.14.1.4.5 | TablehmAgentLogSyslogHostTable | not-accessible | current | Syslog host table containing syslog host entries. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1 | RowhmAgentLogSyslogHostEntry | not-accessible | current | Syslog Host entry attributes. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1.1 | ColumnhmAgentLogHostTableIndex | not-accessible | current | Index to syslog host entry in syslog host table. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1.3 | ColumnhmAgentLogHostTableIpAddress | read-create | current | Syslog Host table IP Address. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1.4 | ColumnhmAgentLogHostTablePort | read-create | current | Syslog Host table port number. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1.5 | ColumnhmAgentLogHostTableSeverityFilter | read-create | current | Configures the minimum severity that will be stored in the In Memory log. |
| 1.3.6.1.4.1.248.15.14.1.4.5.1.7 | ColumnhmAgentLogHostTableRowStatus | read-create | current | Syslog Host table row status |
| 1.3.6.1.4.1.248.15.19 | NodehmPlatform4OutboundTelnetPrivate | |||
| 1.3.6.1.4.1.248.15.19.1 | NodehmAgentOutboundTelnetGroup | |||
| 1.3.6.1.4.1.248.15.19.1.1 | ScalarhmAgentOutboundTelnetAdminMode | read-write | current | Admin-mode of the Outbound Telnet. |
| 1.3.6.1.4.1.248.15.19.1.2 | ScalarhmAgentOutboundTelnetMaxNoOfSessions | read-write | current | The maximum no. of Outbound Telnet sessions allowed. |
| 1.3.6.1.4.1.248.15.19.1.3 | ScalarhmAgentOutboundTelnetTimeout | read-write | current | The login inactivity timeout value for Outbound Telnet. |
| 1.3.6.1.4.1.248.15.36 | NodehmAgentDot1xAdvanced | |||
| 1.3.6.1.4.1.248.15.36.1 | NodehmAgentDot1xEnhancementConfigGroup | |||
| 1.3.6.1.4.1.248.15.36.1.1 | ScalarhmAgentDot1xRadiusVlanAssignment | read-write | current | Enable/Disable dot1x Vlan Assignment Support on the switch. |
| 1.3.6.1.4.1.248.15.36.1.2 | ScalarhmAgentDot1xDynamicVlanCreationMode | read-write | current | Enable/Disable dot1x dynamic vlan creation Support on the switch. |
| 1.3.6.1.4.1.248.15.36.1.3 | ScalarhmAgentDot1xSafeVlanMode | read-write | current | Enable/Disable dot1x safe vlan assignment on the switch for multi-client authentication. |
| 1.3.6.1.4.1.248.15.36.2 | NodehmAgentDot1xPortConfigGroup | |||
| 1.3.6.1.4.1.248.15.36.2.1 | TablehmAgentDot1xPortConfigTable | not-accessible | current | A table for dot1x enhanced Port details and associated functionality. |
| 1.3.6.1.4.1.248.15.36.2.1.1 | RowhmAgentDot1xPortConfigEntry | not-accessible | current | Represents entry for port config table. |
| 1.3.6.1.4.1.248.15.36.2.1.1.1 | ColumnhmAgentDot1xPortControlMode | read-write | current | Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the … |
| 1.3.6.1.4.1.248.15.36.2.1.1.2 | ColumnhmAgentDot1xGuestVlanId | read-write | current | Specifies the Guest Vlan of the port. A port will be moved to its Guest Vlan if no client sucessfully authenticates on that port for the Guest Vlan Period. A v… |
| 1.3.6.1.4.1.248.15.36.2.1.1.3 | ColumnhmAgentDot1xGuestVlanPeriod | read-write | current | The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the port . |
| 1.3.6.1.4.1.248.15.36.2.1.1.4 | ColumnhmAgentDot1xUnauthenticatedVlan | read-write | current | Specifies the Unauthenticated Vlan of the port. A port will be moved to its unauthenticated Vlan if the client authenticates unsucessfully on that port . A val… |
| 1.3.6.1.4.1.248.15.36.2.1.1.5 | ColumnhmAgentDot1xMaxUsers | read-write | current | Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased. |
| 1.3.6.1.4.1.248.15.36.2.1.1.6 | ColumnhmAgentDot1xPortVlanAssigned | read-only | current | Specifies the vlan the port is assigned to by Dot1x . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.248.15.36.2.1.1.7 | ColumnhmAgentDot1xPortVlanAssignedReason | read-only | current | Reason the port is assigned to the vlan specified by hmAgentDot1xPortVlanAssigned . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.248.15.36.2.1.1.8 | ColumnhmAgentDot1xPortSessionTimeout | read-only | current | Specifies the session timeout value assigned by the Radius server for this port . Only relevant if the port control mode of the port is auto. |
| 1.3.6.1.4.1.248.15.36.2.1.1.9 | ColumnhmAgentDot1xPortTerminationAction | read-only | current | Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . Only relevant if the port control… |
| 1.3.6.1.4.1.248.15.36.2.1.1.10 | ColumnhmAgentDot1xPortMABenabled | read-write | current | Specifies if Mac-based bypass authentication is configured for the port. |
| 1.3.6.1.4.1.248.15.36.2.1.1.11 | ColumnhmAgentDot1xPortMABenabledOperational | read-only | current | Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. |
| 1.3.6.1.4.1.248.15.36.3 | NodehmAgentDot1xClientConfigGroup | |||
| 1.3.6.1.4.1.248.15.36.3.1 | TablehmAgentDot1xClientConfigTable | not-accessible | current | A table for dot1x Client details and associated functionality. |
| 1.3.6.1.4.1.248.15.36.3.1.1 | RowhmAgentDot1xClientConfigEntry | not-accessible | current | Represents entry for port config table. |
| 1.3.6.1.4.1.248.15.36.3.1.1.1 | ColumnhmAgentDot1xClientMacAddress | read-only | current | Specifies the client MAC address of the client. |
| 1.3.6.1.4.1.248.15.36.3.1.1.2 | ColumnhmAgentDot1xLogicalPort | read-only | current | Specifies the client MAC address of the client . |
| 1.3.6.1.4.1.248.15.36.3.1.1.3 | ColumnhmAgentDot1xInterface | read-only | current | Specifies the physical interface to which the client is attached . |
| 1.3.6.1.4.1.248.15.36.3.1.1.4 | ColumnhmAgentDot1xClientAuthPAEstate | read-only | current | The current value of the Authenticator PAE state machine for the client. |
| 1.3.6.1.4.1.248.15.36.3.1.1.5 | ColumnhmAgentDot1xClientBackendState | read-only | current | The current state of the Backend Authentication state machine. |
| 1.3.6.1.4.1.248.15.36.3.1.1.6 | ColumnhmAgentDot1xClientUserName | read-only | current | Specifies the username with which the client is authenticated to the Radius server . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.248.15.36.3.1.1.7 | ColumnhmAgentDot1xClientSessionTime | read-only | current | Specifies the time elapsed in seconds since the client was authenticated in this session. This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.248.15.36.3.1.1.8 | ColumnhmAgentDot1xClientFilterID | read-only | current | Specifies the Filter ID or Diffserv Policy name to be applied to the session . This vlaue is populated only if it has been assigned by the RADIUS server. This … |
| 1.3.6.1.4.1.248.15.36.3.1.1.9 | ColumnhmAgentDot1xClientVlanAssigned | read-only | current | Specifies the vlan the client is associated with by Dot1x . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.248.15.36.3.1.1.10 | ColumnhmAgentDot1xClientVlanAssignedReason | read-only | current | Reason the client is associated to the vlan specified by hmAgentDot1xClientVlanAssigned . This value is only valid when the client is in authenticated state. |
| 1.3.6.1.4.1.248.15.36.3.1.1.11 | ColumnhmAgentDot1xClientSessionTimeout | read-only | current | Specifies the session time remaining for the client if assigned by the Radius server . A value of 0 indicates that no session timeout was assigned by the RADIU… |
| 1.3.6.1.4.1.248.15.36.3.1.1.12 | ColumnhmAgentDot1xClientTerminationAction | read-only | current | Specifies the session termination action assigned by the Radius Server . This is the action taken when the session times out . This value is only valid when th… |
| 1.3.6.1.4.1.248.15.36.4 | Nodedot1xTraps | |||
| 1.3.6.1.4.1.248.15.36.4.1 | Notificationdot1xPortStatusAuthorized | current | DOT1X port status is authorized. | |
| 1.3.6.1.4.1.248.15.36.4.2 | Notificationdot1xPortStatusUnauthorized | current | DOT1X port status is unauthorized. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | current | the Bridge-Identifier as used in the Spanning Tree |
| HmAgentDot1xPortControlMode | INTEGER { forceUnauthorized(1), auto(2), forceAuthorized(3), macBased(4) } | current | The control values of the Authenticator PAE controlled Port. |
| HmAgentDot1xSessionTerminationAction | INTEGER { default(1), reauthenticate(2) } | current | The action to be taken on session termination . |
| HmAgentPortMask | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |