HM2-L2REDUNDANCY-DLR-MIB
73 objects
Hirschmann Layer 2 Redundancy DLR MIB. Copyright (C) 2014. All Rights Reserved.
Imported Objects
| HM2-L2REDUNDANCY-MIB | hm2L2RedundancyMibObjects |
| HM2-TC-MIB | HmEnabledStatus |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.40.1.5 | Identityhm2DlrMibGroup | Hirschmann Layer 2 Redundancy DLR MIB. Copyright (C) 2014. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.40.1.5.0 | Nodehm2DlrMibNotifications | |||
| 1.3.6.1.4.1.248.11.40.1.5.0.1 | Notificationhm2DlrRingStatusTrap | current | This trap is sent when the network status changes. | |
| 1.3.6.1.4.1.248.11.40.1.5.1 | Nodehm2DlrMibObjects | |||
| 1.3.6.1.4.1.248.11.40.1.5.1.1 | Nodehm2DlrConfiguration | |||
| 1.3.6.1.4.1.248.11.40.1.5.1.1.1 | Scalarhm2DlrGlobalAdminState | read-write | current | Enable or disable DLR globally. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10 | Tablehm2DlrConfigTable | not-accessible | current | DLR configuration parameters table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1 | Rowhm2DlrConfigEntry | not-accessible | current | Entry for DLR configuration parameters. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1 | Columnhm2DlrRingIndex | accessible-for-notify | current | DLR ring index. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.2 | Columnhm2DlrRingName | read-create | current | A logical name for the DLR ring to ease the management of DLR rings. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.3 | Columnhm2DlrRingport1IfIndex | read-create | current | Interface index of the ringport 1 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.4 | Columnhm2DlrRingport2IfIndex | read-create | current | Interface index of the ringport 2 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.5 | Columnhm2DlrRingport1OperStatus | read-only | current | Operational status of ringport 1. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.6 | Columnhm2DlrRingport2OperStatus | read-only | current | Operational status of ringport 2. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.7 | Columnhm2DlrSupervisorAdminState | read-create | current | Enable or disable the supervisor function. enable(1) indicates the device is configured as a ring supervisor. disable(2) indicates the device is configured as … |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.8 | Columnhm2DlrSupervisorPrecedence | read-create | current | Precedence of the ring supervisor. Numerically higher value indicates higher precedence. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.9 | Columnhm2DlrBeaconInterval | read-create | current | Beacon interval time in microseconds. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10 | Columnhm2DlrBeaconTimeout | read-create | current | Beacon timeout in microseconds. The Beacon Timeout shall be at least two times the Beacon Interval value. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.11 | Columnhm2DlrVLANID | read-create | current | VLAN ID to use in the DLR protocol messages. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12 | Columnhm2DlrService | read-create | current | DLR specific services. noService(0) will be returned when reading this attribute. verifyFaultLocation(1) causes the supervisor to verify fault location. clearR… |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.15 | Columnhm2DlrConfigRowStatus | read-create | current | Describes the status of a row in the table. Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can … |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11 | Tablehm2DlrGatewayConfigTable | not-accessible | current | Gateway settings table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1 | Rowhm2DlrGatewayConfigEntry | not-accessible | current | Entry with DLR gateway settings for the indexed ring. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.1 | Columnhm2DlrGatewayIndex | accessible-for-notify | current | DLR gateway index. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.2 | Columnhm2DlrGatewayName | read-create | current | A logical name for the DLR gateway to ease the management of DLR gateways. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.3 | Columnhm2DlrGatewayConfigLearningUpdate | read-create | current | Enable or disable DLR gateway learning update. enable(1) indicates all DLR nodes will send Learning_Update frame after gateway switchover. disable(2) indicates… |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.4 | Columnhm2DlrGatewayConfigPrecedence | read-create | current | Precedence of the DLR gateway. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.5 | Columnhm2DlrGatewayConfigAdvertiseInterval | read-create | current | Gateway advertise interval time in microseconds. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.6 | Columnhm2DlrGatewayConfigAdvertiseTimeout | read-create | current | Gateway advertise timeout in microseconds. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.7 | Columnhm2DlrGatewayConfigUplinkPort1IfIndex | read-create | current | Interface index of the uplink port 1 of the DLR gateway. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.8 | Columnhm2DlrGatewayConfigUplinkPort2IfIndex | read-create | current | Interface index of the uplink port 2 of the DLR gateway. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.9 | Columnhm2DlrGatewayUplinkPort1OperStatus | read-only | current | Operational status of the gateway uplink port 1. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.10 | Columnhm2DlrGatewayUplinkPort2OperStatus | read-only | current | Operational status of the gateway uplink port 2. |
| 1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.15 | Columnhm2DlrGatewayConfigRowStatus | read-create | current | Describes the status of a row in the table. Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can … |
| 1.3.6.1.4.1.248.11.40.1.5.1.2 | Nodehm2DlrStatus | |||
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1 | Tablehm2DlrStatusTable | not-accessible | current | DLR runtime status table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1 | Rowhm2DlrStatusEntry | not-accessible | current | DLR runtime status entry. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.1 | Columnhm2DlrCapabilityFlags | read-only | current | DLR device capabilities. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.2 | Columnhm2DlrDeviceOperStatus | read-only | current | Operational status of the device in the DLR ring. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.3 | Columnhm2DlrNetworkTopology | read-only | current | Current network topology mode. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.4 | Columnhm2DlrNetworkStatus | read-only | current | Current network status. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.5 | Columnhm2DlrLastNetworkStatusChange | read-only | current | The time in seconds since the network status has changed at last. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.6 | Columnhm2DlrRingParticipantsCount | read-only | current | Number of devices in the ring protocol participiants list. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.7 | Columnhm2DlrActiveSupervisorIpAddressType | read-only | current | Address type of hm2DlrActiveSupervisorIpAddress. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.8 | Columnhm2DlrActiveSupervisorIpAddress | read-only | current | IP address of the active ring supervisor. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.9 | Columnhm2DlrActiveSupervisorMacAddress | read-only | current | MAC address of the active ring supervisor. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.10 | Columnhm2DlrActiveSupervisorPrecedence | read-only | current | Precedence value of the active ring supervisor. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.11 | Columnhm2DlrRingFaultsCount | read-only | current | Number of times since the supervisor has started, that the device has detected a ring fault, as either active or backup supervisor. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.12 | Columnhm2DlrLastActiveNodePort1IpAddressType | read-only | current | Address type of hm2DlrLastActiveNodePort1IpAddress. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.13 | Columnhm2DlrLastActiveNodePort1IpAddress | read-only | current | IP address of last active node on port 1. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.14 | Columnhm2DlrLastActiveNodePort1MacAddress | read-only | current | MAC address of last active node on port 1. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.15 | Columnhm2DlrLastActiveNodePort2IpAddressType | read-only | current | Address type of hm2DlrLastActiveNodePort2IpAddress. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.16 | Columnhm2DlrLastActiveNodePort2IpAddress | read-only | current | IP address of last active node on port 2. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.17 | Columnhm2DlrLastActiveNodePort2MacAddress | read-only | current | MAC address of last active node on port 2. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2 | Tablehm2DlrRingParticipantsTable | not-accessible | current | DLR ring participants table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2.1 | Rowhm2DlrRingParticipantsEntry | not-accessible | current | List of devices participating in the ring protocol. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.1 | Columnhm2DlrRingParticipantsIndex | not-accessible | current | Index for the ring participants table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.2 | Columnhm2DlrRingParticipantsIpAddressType | read-only | current | Address type of hm2DlrRingParticipantsIpAddress. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.3 | Columnhm2DlrRingParticipantsIpAddress | read-only | current | IP address of the participant node. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.4 | Columnhm2DlrRingParticipantsMacAddress | read-only | current | MAC address of the participant node. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3 | Tablehm2DlrGatewayStatusTable | not-accessible | current | DLR gateway status table. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1 | Rowhm2DlrGatewayStatusEntry | not-accessible | current | DLR gateway status information entry. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.1 | Columnhm2DlrGatewayStatus | read-only | current | Gateway status. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.2 | Columnhm2DlrGatewayStatusPrecedence | read-only | current | Precedence value of the active gateway. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.3 | Columnhm2DlrGatewayStatusIpAddressType | read-only | current | Address type of hm2DlrGatewayStatusIpAddress. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.4 | Columnhm2DlrGatewayStatusIpAddress | read-only | current | IP address of the active gateway. |
| 1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.5 | Columnhm2DlrGatewayStatusMacAddress | read-only | current | MAC address of the active gateway. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hm2DlrGatewayStatusType | INTEGER { nonGateway(0), backup(1), active(2), uplinkFault(3), unsupported(4), networkFault(5) } | current | Gateway status type. |
| Hm2DlrNetworkStatusType | INTEGER { normal(0), ringFault(1), loop(2), partial(3), rapidFault(4) } | current | Network status type. |
| Hm2DlrNetworkTopologyType | INTEGER { linear(0), ring(1) } | current | Network topology type. |
| Hm2DlrPortStatusType | INTEGER { disabled(1), blocked(2), forwarding(3), notConnected(4) } | current | Operational port status type. |
| Hm2DlrRingDeviceStatusType | INTEGER { backup(0), supervisor(1), node(2), nonDlr(3), unsupported(4) } | current | Ring device status type. |
| Hm2DlrTimeInterval | Integer32 (0..2147483647) | current | A period of time, measured in units of 1 second. |