HM2-POE-MIB
46 objects
Hirschmann Power over Ethernet Management MIB. This MIB contains the private extensions to the RFC 3621. Copyright (C) 2011. All Rights Reserved.
Imported Objects
| HM2-DEVMGMT-MIB | hm2IfacePhysIndex |
| HM2-TC-MIB | hm2ConfigurationMibs HmEnabledStatus HmTimeHHMM24 |
| SNMP-FRAMEWORK-MIB | -- RFC 2578 SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.12 | Identityhm2PoeMgmtMib | Hirschmann Power over Ethernet Management MIB. This MIB contains the private extensions to the RFC 3621. Copyright (C) 2011. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.12.0 | Nodehm2PoeMgmtMibNotifications | |||
| 1.3.6.1.4.1.248.11.12.0.1 | Notificationhm2PoeMgmtModulePowerUsageOnNotification | current | This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 msec must elapse between notifications be… | |
| 1.3.6.1.4.1.248.11.12.0.2 | Notificationhm2PoeMgmtModulePowerUsageOffNotification | current | This Notification indicate PSE Threshold usage indication is on, the usage power is below the threshold. At least 500 msec must elapse between notifications be… | |
| 1.3.6.1.4.1.248.11.12.0.3 | Notificationhm2PoeMgmtPortMaxConfiguredPowerLimitExceeded | current | This trap reports an exceeding of the configured power limit. This notification indicates that a PD consumes more power that the maximum configured on the port… | |
| 1.3.6.1.4.1.248.11.12.1 | Nodehm2PoeMgmtMibObjects | |||
| 1.3.6.1.4.1.248.11.12.1.1 | Nodehm2PoeMgmtGroup | |||
| 1.3.6.1.4.1.248.11.12.1.1.1 | Nodehm2PoeMgmtGlobalGroup | |||
| 1.3.6.1.4.1.248.11.12.1.1.1.1 | Scalarhm2PoeMgmtAdminStatus | read-write | current | Enables/disables Power over Ethernet management on this device. |
| 1.3.6.1.4.1.248.11.12.1.1.1.2 | Scalarhm2PoeMgmtReservedPower | read-only | current | Reserved system power for active Power over Ethernet ports in Watts. |
| 1.3.6.1.4.1.248.11.12.1.1.1.3 | Scalarhm2PoeMgmtDeliveredCurrent | read-only | current | The measured current delivered over Ethernet ports in milliamperes |
| 1.3.6.1.4.1.248.11.12.1.1.2 | Tablehm2PoeMgmtPsuTable | not-accessible | current | This table contains objects for each power supply type of the device (internal or external power supply). |
| 1.3.6.1.4.1.248.11.12.1.1.2.1 | Rowhm2PoeMgmtPsuEntry | not-accessible | current | The entries of the hm2PoeMgmtPsuTable. |
| 1.3.6.1.4.1.248.11.12.1.1.2.1.1 | Columnhm2PoeMgmtPsuPower | read-only | current | The power budget per psu type expressed in Watts. Psu types could be internal or external. |
| 1.3.6.1.4.1.248.11.12.1.1.2.1.2 | Columnhm2PoeMgmtPsuReservedPower | read-only | current | The reserved power (depending on actual power classes) per psu type expressed in Watts. |
| 1.3.6.1.4.1.248.11.12.1.1.2.1.3 | Columnhm2PoeMgmtPsuDeliveredPower | read-only | current | The measured usage power per psu type expressed in Watts. |
| 1.3.6.1.4.1.248.11.12.1.1.2.1.4 | Columnhm2PoeMgmtPsuDeliveredCurrent | read-only | current | The measured current delivered per psu type expressed in milliamperes |
| 1.3.6.1.4.1.248.11.12.1.1.3 | Tablehm2PoeMgmtPortTable | not-accessible | current | This table contains objects for each Power over Ethernet interface of the device. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1 | Rowhm2PoeMgmtPortEntry | not-accessible | current | The entry of the hm2PoeMgmtPortTable. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.1 | Columnhm2PoeMgmtPortAdminEnable | read-write | current | enable (1) An interface which can provide the PSE functions. disable(2) The interface will act - as it would - if it had no PSE function. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.2 | Columnhm2PoeMgmtPortConsumptionPower | read-only | current | Measured usage power per interface expressed in Milliwatts. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.3 | Columnhm2PoeMgmtPortDetectionStatus | read-only | current | Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of de… |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.4 | Columnhm2PoeMgmtPortPowerPriority | read-write | current | This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used b… |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.5 | Columnhm2PoeMgmtPortPowerClassification | read-only | current | Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN acce… |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.6 | Columnhm2PoeMgmtPortName | read-write | current | A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if … |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.7 | Columnhm2PoeMgmtPortAllowedClassBits | read-write | current | Bit mask which defines allowed classes per interface. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.8 | Columnhm2PoeMgmtPortAutoShutdown | read-write | current | Enables/disables automatic shutdown functionality per interface. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.9 | Columnhm2PoeMgmtPortAutoShutdownTimeStart | read-write | current | Start time for the automatic shutdown functionality per interface. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.10 | Columnhm2PoeMgmtPortAutoShutdownTimeEnd | read-write | current | End time for the automatic shutdown functionality per interface. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.11 | Columnhm2PoeMgmtPortClassValid | read-only | current | Evaluates if class represented through pethPsePortPowerClassifications is valid or not. Class is valid if PD is delivered with power or in case of power exceed… |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.12 | Columnhm2PoeMgmtPortFastStartup | read-write | current | Enables/disables Power over Ethernet fast startup mode on given port. The default value is 'disable'. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.13 | Columnhm2PoeMgmtPortMaxConsumptionPower | read-only | current | The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE adm… |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.14 | Columnhm2PoeMgmtPortPowerLimit | read-write | current | The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled. |
| 1.3.6.1.4.1.248.11.12.1.1.3.1.15 | Columnhm2PoeMgmtPortConsumptionCurrent | read-only | current | Measured current consumption per interface expressed in milliamperes (mA). |
| 1.3.6.1.4.1.248.11.12.1.1.4 | Tablehm2PoeMgmtModuleTable | not-accessible | current | This table contains objects for each plugged PoE module of the device. If the device is non-modular and supports PoE it contains only one entry. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1 | Rowhm2PoeMgmtModuleEntry | not-accessible | current | The entries of the hm2PoeMgmtModuleTable. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.1 | Columnhm2PoeMgmtModuleUnitIndex | not-accessible | current | Unit number - for stacking devices. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.2 | Columnhm2PoeMgmtModuleSlotIndex | not-accessible | current | Slot number of the plugged PoE module. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.3 | Columnhm2PoeMgmtModulePower | read-write | current | Configurable power budget per module expressed in Watts. The default value is hm2PoeMgmtModuleMaximumPower and depends on the hardware. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.4 | Columnhm2PoeMgmtModuleMaximumPower | read-only | current | Maximum available power budget per module expressed in Watts. This value depends on the device or module. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.5 | Columnhm2PoeMgmtModuleReservedPower | read-only | current | The reserved power (depending on actual power classes) per module expressed in Watts. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.6 | Columnhm2PoeMgmtModuleDeliveredPower | read-only | current | The measured usage power per module expressed in Watts. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.7 | Columnhm2PoeMgmtModulePowerSource | read-only | current | This object displays the type of the PoE power source. internal (0) means that the PoE power is used from the internal PSU and external (1) means that a extern… |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.8 | Columnhm2PoeMgmtModuleUsageThreshold | read-write | current | The usage power threshold per module expressed in percent. If this threshold is exceeded a alarm is initiated. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.9 | Columnhm2PoeMgmtModuleNotificationControlEnable | read-write | current | This object controls, on a per-module basis, whether or not notifications from the agent are enabled. |
| 1.3.6.1.4.1.248.11.12.1.1.4.1.10 | Columnhm2PoeMgmtModuleDeliveredCurrent | read-only | current | The measured current consumption per module expressed in milliamperes (mA). |