HMIOMODULE-SNMP-MIB
38 objects
The Hirschmann Private IO Module definitions for Platform devices.
Imported Objects
| HMPRIV-MGMT-SNMP-MIB | hmChassis hmChassisEvent |
| INET-ADDRESS-MIB | InetPortNumber |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.14.1.0.16 | NotificationhmIOModDigInputChangeTrap | current | This trap is sent if the state of an input changes. This trap is sent only when hmIOModConfigDigInputSnmpTrap is set to enabled (1). | |
| 1.3.6.1.4.1.248.14.1.0.17 | NotificationhmIOModDigOutputChangeTrap | current | This trap is sent if the state of an input changes. This trap is sent when hmIOModConfigDigOutputSnmpTrap is set to enabled (1) or when the output value change… | |
| 1.3.6.1.4.1.248.14.1.13 | IdentityhmIOModuleGroup | The Hirschmann Private IO Module definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.14.1.13.1 | NodehmIOModuleConfigGroup | |||
| 1.3.6.1.4.1.248.14.1.13.1.1 | NodehmIOModConfigCommon | |||
| 1.3.6.1.4.1.248.14.1.13.1.1.1 | ScalarhmIOModConfigDigInputAdminState | read-write | current | enables sending SNMP traps or log events on input change. (if disable(2) input task will do nothing). |
| 1.3.6.1.4.1.248.14.1.13.1.1.2 | ScalarhmIOModConfigDigOutputAdminState | read-write | current | enables polling of output values (if disable(2) output task will do nothing). |
| 1.3.6.1.4.1.248.14.1.13.1.1.3 | ScalarhmIOModConfigDigInputRefreshInterval | read-write | current | The refresh interval (in ms) of the input values. Minimum 500ms, Maximum 10000ms (10s). |
| 1.3.6.1.4.1.248.14.1.13.1.1.4 | ScalarhmIOModConfigDigOutputRefreshInterval | read-write | current | The refresh interval (in ms) of the output values. Minimum 500ms, Maximum 10000ms (10s). |
| 1.3.6.1.4.1.248.14.1.13.1.1.5 | ScalarhmIOModConfigDigOutputRetryCount | read-write | current | The retry count for the output values. when after the number of configured retries no SNMP get request was answered, the output value (hmIOModOutputValue) will… |
| 1.3.6.1.4.1.248.14.1.13.1.2 | TablehmIOModConfigDigInputTable | not-accessible | current | IO module config table for inputs |
| 1.3.6.1.4.1.248.14.1.13.1.2.1 | RowhmIOModConfigDigInputEntry | not-accessible | current | IO module config entry for inputs |
| 1.3.6.1.4.1.248.14.1.13.1.2.1.1 | ColumnhmIOModConfigDigInputModID | not-accessible | current | The module ID of an input. |
| 1.3.6.1.4.1.248.14.1.13.1.2.1.2 | ColumnhmIOModConfigDigInputID | not-accessible | current | The ID of an input. |
| 1.3.6.1.4.1.248.14.1.13.1.2.1.3 | ColumnhmIOModConfigDigInputLogEvent | read-write | current | Trigger an event log when input status changes. If the value is disable (2), no event log entry will be written. If the value is enable (1), an event log entry… |
| 1.3.6.1.4.1.248.14.1.13.1.2.1.4 | ColumnhmIOModConfigDigInputSnmpTrap | read-write | current | Trigger an SNMP trap log when input status changes. If the value is disable (2), no SNMP trap will be sent. If the value is enable (1), a SNMP trap will be sen… |
| 1.3.6.1.4.1.248.14.1.13.1.3 | TablehmIOModConfigDigOutputTable | not-accessible | current | IO module config table for outputs |
| 1.3.6.1.4.1.248.14.1.13.1.3.1 | RowhmIOModConfigDigOutputEntry | not-accessible | current | IO module config entry for outputs |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.1 | ColumnhmIOModConfigDigOutputModID | not-accessible | current | The module ID of an output. |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.2 | ColumnhmIOModConfigDigOutputID | not-accessible | current | The ID of an output. |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.3 | ColumnhmIOModConfigDigOutputLogEvent | read-write | current | Trigger an event log when output status changes. If the value is disable (2), no event log entry will be written. If the value is enable (1), an event log entr… |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.4 | ColumnhmIOModConfigDigOutputSnmpTrap | read-write | current | Trigger an SNMP trap log when output status changes. If the value is disable (2), no SNMP trap will be sent. If the value is enable (1), a SNMP trap will be se… |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.5 | ColumnhmIOModConfigDigOutputSourceIP | read-write | current | The IP address of an input mirrored to the output. Use 0.0.0.0 if the output should not be set. In this case hmIOModOutputValue is invalid (3). Use 127.0.0.1 i… |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.6 | ColumnhmIOModConfigDigOutputSourceModID | read-write | current | The module ID of an input mirrored to the output. Ignored when hmIOModConfigDigOutputSourceIP is 0.0.0.0. |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.7 | ColumnhmIOModConfigDigOutputSourceID | read-write | current | The ID of an input mirrored to the output. Ignored when hmIOModConfigDigOutputSourceIP is 0.0.0.0. |
| 1.3.6.1.4.1.248.14.1.13.1.3.1.8 | ColumnhmIOModConfigDigOutputSourcePort | read-write | current | The SNMP port number being used by the input mirrored to the output. This port would be the destination for the SNMP requests for polling the state of the inpu… |
| 1.3.6.1.4.1.248.14.1.13.2 | NodehmIOModuleValueGroup | |||
| 1.3.6.1.4.1.248.14.1.13.2.1 | TablehmIOModValueDigInputTable | not-accessible | current | IO module value table for inputs |
| 1.3.6.1.4.1.248.14.1.13.2.1.1 | RowhmIOModValueDigInputEntry | not-accessible | current | IO module value entry for inputs |
| 1.3.6.1.4.1.248.14.1.13.2.1.1.1 | ColumnhmIOModValueDigInputModID | not-accessible | current | The module ID of an input. |
| 1.3.6.1.4.1.248.14.1.13.2.1.1.2 | ColumnhmIOModValueDigInputID | not-accessible | current | The ID of an input. |
| 1.3.6.1.4.1.248.14.1.13.2.1.1.3 | ColumnhmIOModValueDigInputValue | read-only | current | Status of the input. If the value is not-available(0), then the IO module is not plugged in, if the value is high(1), the input has high (+24V) value, if the v… |
| 1.3.6.1.4.1.248.14.1.13.2.2 | TablehmIOModValueDigOutputTable | not-accessible | current | IO module value table for outputs |
| 1.3.6.1.4.1.248.14.1.13.2.2.1 | RowhmIOModValueDigOutputEntry | not-accessible | current | IO module value entry for outputs |
| 1.3.6.1.4.1.248.14.1.13.2.2.1.1 | ColumnhmIOModValueDigOutputModID | not-accessible | current | The module ID of an Output. |
| 1.3.6.1.4.1.248.14.1.13.2.2.1.2 | ColumnhmIOModValueDigOutputID | not-accessible | current | The ID of an Output. |
| 1.3.6.1.4.1.248.14.1.13.2.2.1.3 | ColumnhmIOModValueDigOutputValue | read-only | current | Status of the output. If the value is not-available(0), then the IO module is not plugged in, if the value is high(1), the output has high (+24V) value, if the… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HmEnabledStatus | INTEGER { enable(1), disable(2) } | current | Status of a feature |