HMIT-SW-PORTMGR-DDMI-MIB
68 objects
No module-level DESCRIPTION found.
Imported Objects
| HMIT-SW-PORT-MGR-MIB | hmITSwPortmgrMIB |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6 | TableportDDMITable | not-accessible | current | The information of the DDMI on the switch. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1 | RowportDDMIEntry | not-accessible | current | The information of the DDMI on the switch. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.1 | ColumnportDDMIIFindex | read-only | current | The index of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.2 | ColumnportDDMIDeviceId | read-only | current | The physical device described by the two-wire interface information. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.3 | ColumnportDDMIConnector | read-only | current | The external optical or electrical cable connector provided as the media interface. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.4 | ColumnportDDMIEncoding | read-only | current | The serial encoding mechanisms that are supported by the particular transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.6 | ColumnportDDMITransmitLen | read-only | current | The link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber, 62.5 micron multimode… |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.7 | ColumnportDDMIVendorOUI | read-only | current | The vendor organizationally unique identifier(OUI) of the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.8 | ColumnportDDMIVendorName | read-only | current | The vendor name of the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.9 | ColumnportDDMIPartName | read-only | current | The vendor part number(vendor PN) of the transceiver. A value of all zero indicates that the vendor PN is unspecified. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.10 | ColumnportDDMIRevisionNum | read-only | current | The vendor revision number(vendor rev) of the transceiver. A value of all zero indicates that the vendor rev is unspecified. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.11 | ColumnportDDMILaserWaveLen | read-only | current | The laser wavelength of the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.12 | ColumnportDDMISerialNum | read-only | current | The vendor serial number(vendor SN) of the transceiver. A value of all zero indicates that the vendor SN is unspecified. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.13 | ColumnportDDMIClass | read-only | current | No longer in use. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.14 | ColumnportDDMIProductDate | read-only | current | The produce date of the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.15 | ColumnportDDMIVendorSpecific | read-only | current | The specific content from the vendor of the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.16 | ColumnportDDMITmperature | read-only | current | The internal temperature measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.17 | ColumnportDDMITempHighAlarmThreshold | read-only | current | The high alarm threshold of the temprature for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.18 | ColumnportDDMITempLowAlarmThreshold | read-only | current | The low alarm threshold of the temprature for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.19 | ColumnportDDMITempHighWarningThreshold | read-only | current | The high warning threshold of the temprature for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.20 | ColumnportDDMITempLowWarningThreshold | read-only | current | The low warning threshold of the temprature for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.21 | ColumnportDDMIVoltage | read-only | current | The supply voltage measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.22 | ColumnportDDMIVolHighAlarmThreshold | read-only | current | The high alarm threshold of the voltage for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.23 | ColumnportDDMIVolLowAlarmThreshold | read-only | current | The low alarm threshold of the voltage for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.24 | ColumnportDDMIVolHighWarningThreshold | read-only | current | The high warning threshold of the voltage for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.25 | ColumnportDDMIVolLowWarningThreshold | read-only | current | The low warning threshold of the voltage for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.26 | ColumnportDDMITxBias | read-only | current | The tx bias measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.27 | ColumnportDDMITxBiasHighAlarmThreshold | read-only | current | The high alarm threshold of the tx bias for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.28 | ColumnportDDMITxBiasLowAlarmThreshold | read-only | current | The low alarm threshold of the tx bias for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.29 | ColumnportDDMITxBiasHighWarningThreshold | read-only | current | The high warning threshold of the tx bias for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.30 | ColumnportDDMITxBiasLowWarningThreshold | read-only | current | The low warning threshold of the tx bias for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.31 | ColumnportDDMITxPower | read-only | current | The tx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.32 | ColumnportDDMITxPowerHighAlarmThreshold | read-only | current | The high alarm threshold of the tx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.33 | ColumnportDDMITxPowerLowAlarmThreshold | read-only | current | The low alarm threshold of the tx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.34 | ColumnportDDMITxPowerHighWarningThreshold | read-only | current | The high warning threshold of the tx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.35 | ColumnportDDMITxPowerLowWarningThreshold | read-only | current | The low warning threshold of the tx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.36 | ColumnportDDMIRxPower | read-only | current | The rx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.37 | ColumnportDDMIRxPowerHighAlarmThreshold | read-only | current | The high alarm threshold of the rx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.38 | ColumnportDDMIRxPowerLowAlarmThreshold | read-only | current | The low alarm threshold of the rx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.39 | ColumnportDDMIRxPowerHighWarningThreshold | read-only | current | The high warning threshold of the rx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.40 | ColumnportDDMIRxPowerLowWarningThreshold | read-only | current | The low warning threshold of the rx power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.41 | ColumnportDDMIAlarmStatus | read-only | current | The current alarm status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.42 | ColumnportDDMIWarningStatus | read-only | current | The current warning status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.43 | ColumnportDDMIIsMonotorImpt | read-only | current | The diagnostic monitoring type that is implemented in the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.44 | ColumnportDDMIResult | read-only | current | The operation result for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.45 | ColumnportDDMITxBias2 | read-only | current | The tx bias measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.46 | ColumnportDDMITxBias3 | read-only | current | The tx bias measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.47 | ColumnportDDMITxBias4 | read-only | current | The tx bias measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.48 | ColumnportDDMIRxPower2 | read-only | current | The rx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.49 | ColumnportDDMIRxPower3 | read-only | current | The rx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.50 | ColumnportDDMIRxPower4 | read-only | current | The rx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.51 | ColumnportDDMIAlarmStatus2 | read-only | current | The current alarm status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.52 | ColumnportDDMIAlarmStatus3 | read-only | current | The current alarm status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.53 | ColumnportDDMIAlarmStatus4 | read-only | current | The current alarm status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.54 | ColumnportDDMIWarningStatus2 | read-only | current | The current warning status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.55 | ColumnportDDMIWarningStatus3 | read-only | current | The current warning status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.56 | ColumnportDDMIWarningStatus4 | read-only | current | The current warning status of the temprature/supply voltage /TX bias/TX power/RX power for the transceiver. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.57 | ColumnportDDMITxPower2 | read-only | current | The tx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.58 | ColumnportDDMITxPower3 | read-only | current | The tx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.59 | ColumnportDDMITxPower4 | read-only | current | The tx power measured by the transceiver itself. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100 | NodeopticalModuleExceptionTrap | |||
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.1 | NotificationopticalModuleTemperatureHighWarnTrap | current | optical module temperature high warn. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.2 | NotificationopticalModuleTemperatureLowWarnTrap | current | optical module temperature low warn. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.3 | NotificationopticalModuleTemperatureRecoverTrap | current | optical module temperature recover. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.4 | NotificationopticalModuleRxpowerLowWarnTrap | current | optical module rxpower low. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.6 | NotificationopticalModuleRxpowerRecoverTrap | current | optical module rxpower recover. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.7 | NotificationopticalModuleTxFaultWarnTrap | current | optical module txfault warn. | |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.6.100.8 | NotificationopticalModuleTxFaultRecoverTrap | current | optical module txfault recover. |