HMLLDP-MIB
20 objects
The Hirschmann Private LLDP MIB definitions for Platform devices.
Imported Objects
| HMPRIV-MGMT-SNMP-MIB | hmConfiguration |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.14.7 | IdentityhmLLDP | The Hirschmann Private LLDP MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.14.7.1 | NodehmLLDPConfig | |||
| 1.3.6.1.4.1.248.14.7.1.1 | ScalarhmLLDPAdminStatus | read-write | current | DURABLE: Enables/disables the IEEE802.1AB functionality on this device. If disabled(2), the LLDP protocol is inactive, but the LLDP MIBs can be accessed. |
| 1.3.6.1.4.1.248.14.7.1.2 | TablehmLLDPInterfaceTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.14.7.1.2.1 | RowhmLLDPIfEntry | not-accessible | current | The entry of the hmLLDPInterfaceTable. |
| 1.3.6.1.4.1.248.14.7.1.2.1.1 | ColumnhmLLDPIfaceGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.7.1.2.1.2 | ColumnhmLLDPIfaceID | read-only | current | index to identify an interface within an interface card. |
| 1.3.6.1.4.1.248.14.7.1.2.1.3 | ColumnhmLLDPIfaceHirmaMode | read-write | current | Configure Hirschmann LLDP on this physical port. If an IEEE802.1AB capable device not manufactured by Hirschmann is connected to a port, hmLLDPIfaceHirmaMode s… |
| 1.3.6.1.4.1.248.14.7.1.2.1.4 | ColumnhmLLDPIfaceFDBMode | read-write | current | If configured to lldpOnly(1), only received LLDP messages will be used to populate the LLDP-MIB's remTable. If configured to macOnly(2), learned mac addresses … |
| 1.3.6.1.4.1.248.14.7.1.2.1.5 | ColumnhmLLDPIfaceMaxNeighbors | read-write | current | Configure Hirschmann LLDP on this physical port. This value limits the number of entries in the remTable for this port. |
| 1.3.6.1.4.1.248.14.7.2 | NodehmLLDPStatistics | |||
| 1.3.6.1.4.1.248.14.7.2.1 | TablehmLLDPStatsIfTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.14.7.2.1.1 | RowhmLLDPStatsIfEntry | not-accessible | current | The entry of the hmLLDPStatsIfTable. |
| 1.3.6.1.4.1.248.14.7.2.1.1.1 | ColumnhmLLDPStatsIfaceGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.7.2.1.1.2 | ColumnhmLLDPStatsIfaceID | read-only | current | index to identify an interface within an interface card. |
| 1.3.6.1.4.1.248.14.7.2.1.1.3 | ColumnhmLLDPStatsIfaceTotalFDBEntryCount | read-only | current | The total number of learned entries in the forwarding database (FDB) for this port. |
| 1.3.6.1.4.1.248.14.7.2.1.1.4 | ColumnhmLLDPStatsIfaceTotalEntryCount | read-only | current | The total number of remote connections in the LLDP MIB's remTable for this port. |
| 1.3.6.1.4.1.248.14.7.2.1.1.5 | ColumnhmLLDPStatsIfaceIEEEEntryCount | read-only | current | The number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an IEEE source was received. |
| 1.3.6.1.4.1.248.14.7.2.1.1.6 | ColumnhmLLDPStatsIfaceHirmaEntryCount | read-only | current | The number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an Hirschmann source was received. |
| 1.3.6.1.4.1.248.14.7.2.1.1.7 | ColumnhmLLDPStatsIfaceFDBEntryCount | read-only | current | The number of remote connections in the LLDP MIB's remTable for this port that were detected in the forwarding database (FDB) for this port. |