HMRING-MGMT-SNMP-MIB
114 objects
The Hirschmann Private Ring Redundancy MIB definitions for Platform devices.
Imported Objects
| HMPRIV-MGMT-SNMP-MIB | hmConfiguration |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.14.5 | IdentityhmRingRedundancy | The Hirschmann Private Ring Redundancy MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.14.5.0 | IdentityhmRingRedundancyEvent | current | The events of hmAgent. | |
| 1.3.6.1.4.1.248.14.5.0.1 | NotificationhmRingRedReconfig | current | The Ring Redundancy mechanism has switched over | |
| 1.3.6.1.4.1.248.14.5.0.2 | NotificationhmRingCplReconfig | current | The Ring Coupling mechanism has switched over | |
| 1.3.6.1.4.1.248.14.5.0.3 | NotificationhmRingRedConfigChanged | current | The configuration of the Ring Redundancy has changed. | |
| 1.3.6.1.4.1.248.14.5.0.4 | NotificationhmMrpReconfig | current | The Media Redundancy Protocol mechanism has switched over. This trap is only sent if hmMrpMRMCheckMediaRedundancy is enabled. | |
| 1.3.6.1.4.1.248.14.5.0.5 | NotificationhmRpcReconfig | current | The Ring Redundancy mechanism has switched over. | |
| 1.3.6.1.4.1.248.14.5.0.6 | NotificationhmSrmReconfig | current | The Ring Redundancy mechanism has switched over. | |
| 1.3.6.1.4.1.248.14.5.1 | TablehmRingRedTable | not-accessible | current | This table contains variables to define an entry in the ring redundancy database. |
| 1.3.6.1.4.1.248.14.5.1.1 | RowhmRingRedEntry | not-accessible | current | The entry of the hmRingRedTable. |
| 1.3.6.1.4.1.248.14.5.1.1.1 | ColumnhmRingRedPrimGroupID | read-only | current | Unique index to identify the slot number of the primary link port. This value is never greater than hmSysGroupCapacity. Note that row creation is done only by … |
| 1.3.6.1.4.1.248.14.5.1.1.2 | ColumnhmRingRedPrimIfIndex | read-only | current | Interface index of the primary link. Note that row creation is only done by writing to hmRingRedMode |
| 1.3.6.1.4.1.248.14.5.1.1.3 | ColumnhmRingRedPrimIfOpState | read-only | current | operational state of the primary interface. |
| 1.3.6.1.4.1.248.14.5.1.1.4 | ColumnhmRingRedRedGroupID | read-write | current | Unique index to identify the slot number of the redundant link port. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.1.1.5 | ColumnhmRingRedRedIfIndex | read-write | current | Interface index of the redundant link. |
| 1.3.6.1.4.1.248.14.5.1.1.6 | ColumnhmRingRedRedIfOpState | read-only | current | operational state of the redundant interface. |
| 1.3.6.1.4.1.248.14.5.1.1.7 | ColumnhmRingRedOperState | read-only | current | operational state of an entry. If a new entry is created by setting hmRingRedMode to create(1), the operState returns a value of underCreation(1). rmActive(2) … |
| 1.3.6.1.4.1.248.14.5.1.1.8 | ColumnhmRingRedMode | read-write | current | Desired mode of operation. To create, modify or deactivate an entry the value create(1) have to be set. delete(2) removes the entry. rm(3) and rs(4) activate t… |
| 1.3.6.1.4.1.248.14.5.1.1.9 | ColumnhmRingRedConfigOperState | read-only | current | Operational state of the ring configuration. rmConfigError(2) indicates that the ring is not connected with both ringports of the redundancy manager, one of th… |
| 1.3.6.1.4.1.248.14.5.1.1.10 | ColumnhmRingRedRecoveryDelay | read-write | current | The hmRingRedRecoveryDelay with its parameter set defines the maximum recovery delay of ring recovery in the HIPER Ring. delay500(1) specifies the parameter se… |
| 1.3.6.1.4.1.248.14.5.2 | TablehmRingCouplingTable | not-accessible | current | This table contains variables to define an entry in the ring coupling database. |
| 1.3.6.1.4.1.248.14.5.2.1 | RowhmRingCouplingEntry | not-accessible | current | The entry of the hmRingCouplingTable. |
| 1.3.6.1.4.1.248.14.5.2.1.1 | ColumnhmRingCplInterconnGroupID | read-write | current | Unique index to identify the slot number of the coupling link port. This value is never greater than hmSysGroupCapacity. Note that row creation is done only by… |
| 1.3.6.1.4.1.248.14.5.2.1.2 | ColumnhmRingCplInterconnIfIndex | read-write | current | Interface index of the coupling link. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism like ring redundancy or d… |
| 1.3.6.1.4.1.248.14.5.2.1.3 | ColumnhmRingCplInterconnIfOpState | read-only | current | Operational state of the coupling interface. active(2) indicates that the port is switching. standby(3) indicates that the port is in standby mode. On the slav… |
| 1.3.6.1.4.1.248.14.5.2.1.4 | ColumnhmRingCplControlGroupID | read-write | current | Unique index to identify the slot number of the control link port in case of outband-control. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.2.1.5 | ColumnhmRingCplControlIfIndex | read-write | current | Interface index of the control link in case of outband-control. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism… |
| 1.3.6.1.4.1.248.14.5.2.1.6 | ColumnhmRingCplControlIfOpState | read-only | current | Operational state of the control interface in case of outband-control. |
| 1.3.6.1.4.1.248.14.5.2.1.7 | ColumnhmRingCplControlMode | read-write | current | Control mode of the ring coupling which can only be chosen by the slave, the master just reports his current control mode. unknown(3) cannot be set. In outband… |
| 1.3.6.1.4.1.248.14.5.2.1.8 | ColumnhmRingCplPartnerIpAddr | read-only | current | IP Address of the partner in the ring coupling. |
| 1.3.6.1.4.1.248.14.5.2.1.9 | ColumnhmRingCplPartnerInterconnGroupID | read-write | current | Index identifies the slot number of the coupling link port of the partner in the ring coupling. This variable can only be set if the hmRingCplControlMode is lo… |
| 1.3.6.1.4.1.248.14.5.2.1.10 | ColumnhmRingCplPartnerInterconnIfIndex | read-write | current | Interface index identifies the coupling link of the partner in the ring coupling. This variable can only be set if the hmRingCplControlMode is local(4). |
| 1.3.6.1.4.1.248.14.5.2.1.11 | ColumnhmRingCplPartnerInterconnIfOpState | read-only | current | Operational state of the coupling interface of the partner in the ring coupling. active(2) indicates that the partner port is switching. standby(3) indicates t… |
| 1.3.6.1.4.1.248.14.5.2.1.12 | ColumnhmRingCplOperState | read-only | current | Operational state of an entry. If a new entry is created by setting hmRingCplRowStatus to create(1), the operState returns a value of underCreation(1). slave(2… |
| 1.3.6.1.4.1.248.14.5.2.1.13 | ColumnhmRingCplMode | read-write | current | Desired mode of operation. slaveOn(2) activates the slave. slaveOff(1) deactivates the slave, the ring coupling is disabled and the switch acts from now in nor… |
| 1.3.6.1.4.1.248.14.5.2.1.14 | ColumnhmRingCplRowStatus | read-create | current | Defines the status of a ring coupling database entry. |
| 1.3.6.1.4.1.248.14.5.2.1.15 | ColumnhmRingCplConfigOperState | read-only | current | Operational state of the ring coupling configuration. slaveCouplingLinkError(2) indicates that the coupling link is not connected with the coupling port of the… |
| 1.3.6.1.4.1.248.14.5.2.1.16 | ColumnhmRingCplCouplingLinks | read-write | current | Maximum coupling links between two coupled rings in case of a failure in one of the coupled rings. If there is no connection starting from the switch in slave … |
| 1.3.6.1.4.1.248.14.5.2.1.17 | ColumnhmRingCplExtendedDiag | read-only | current | Additional operational states detected by the slave or in local mode. basicRedundancyInactive(2) indicates that the coupling port has been prevented from setti… |
| 1.3.6.1.4.1.248.14.5.2.1.18 | ColumnhmRingCplNetCoupling | read-write | current | Specifies the kind of the coupled net segment. If two HIPER Rings are coupled ringCoupling(1) must be used. In netCoupling(2) the coupled segment is no HIPER R… |
| 1.3.6.1.4.1.248.14.5.2.1.19 | ColumnhmRingCplConfigSource | read-only | current | Returns the Source by which the feature is controlled. |
| 1.3.6.1.4.1.248.14.5.3 | TablehmMrpTable | not-accessible | current | Every entry in this table contains information about a Media Redundancy Protocol (MRP) domain. |
| 1.3.6.1.4.1.248.14.5.3.1 | RowhmMrpEntry | not-accessible | current | An entry in the hmMrpTable. |
| 1.3.6.1.4.1.248.14.5.3.1.1 | ColumnhmMrpDomainID | not-accessible | current | Universally unique identifier belongs to the MRP domain which represents a ring. |
| 1.3.6.1.4.1.248.14.5.3.1.2 | ColumnhmMrpRingport1GroupID | read-write | current | Unique index to identify the slot number of the ringport 1 in the MRP domain. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.3.1.3 | ColumnhmMrpRingport1IfIndex | read-write | current | Interface index of the ringport 1 in the MRP domain. |
| 1.3.6.1.4.1.248.14.5.3.1.4 | ColumnhmMrpRingport1OperState | read-only | current | Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frame are dropped except - MRP topology chang… |
| 1.3.6.1.4.1.248.14.5.3.1.5 | ColumnhmMrpRingport2GroupID | read-write | current | Unique index to identify the slot number of the ringport 2 in the MRP domain. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.3.1.6 | ColumnhmMrpRingport2IfIndex | read-write | current | Interface index of the ringport 2 in the MRP domain. |
| 1.3.6.1.4.1.248.14.5.3.1.7 | ColumnhmMrpRingport2OperState | read-only | current | Operational state of ringport 2. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frame are dropped except - MRP topology chang… |
| 1.3.6.1.4.1.248.14.5.3.1.8 | ColumnhmMrpVlanID | read-write | current | VLAN identifier of the MRP domain. |
| 1.3.6.1.4.1.248.14.5.3.1.9 | ColumnhmMrpExpectedRole | read-write | current | Control the role of the MRP entity in the MRP domain. If the value is set to client(1) the entity will be in the role of a Media Redundancy Client (MRC). If th… |
| 1.3.6.1.4.1.248.14.5.3.1.10 | ColumnhmMrpMRCLinkDownInterval | read-only | current | Interval for sending link down MRP link change frames on ringports. |
| 1.3.6.1.4.1.248.14.5.3.1.11 | ColumnhmMrpMRCLinkUpInterval | read-only | current | Interval for sending link up MRP link change frames on ringports. |
| 1.3.6.1.4.1.248.14.5.3.1.12 | ColumnhmMrpMRCLinkChangeCount | read-only | current | MRP link change frame count which controls repeated transmission of MRP link change frames. |
| 1.3.6.1.4.1.248.14.5.3.1.13 | ColumnhmMrpMRCBlockedSupported | read-only | current | Ability of the MRC to receive and forward MRP test frames, MRP link change frames and MRP topology change frames at a ringport whose port state is blocked. ena… |
| 1.3.6.1.4.1.248.14.5.3.1.14 | ColumnhmMrpMRMPriority | read-write | current | Priority of the MRM. A lower value indicates a higher priority. |
| 1.3.6.1.4.1.248.14.5.3.1.15 | ColumnhmMrpMRMTopologyChangeInterval | read-only | current | Interval for sending MRP topology change frames on ringports. |
| 1.3.6.1.4.1.248.14.5.3.1.16 | ColumnhmMrpMRMTopologyChangeRepeatCount | read-only | current | Interval count which controls repeated transmission of MRP topology change frames. |
| 1.3.6.1.4.1.248.14.5.3.1.17 | ColumnhmMrpMRMShortTestInterval | read-only | current | Short interval for sending MRP test frames on ringports after link changes in the ring. |
| 1.3.6.1.4.1.248.14.5.3.1.18 | ColumnhmMrpMRMDefaultTestInterval | read-only | current | Default interval for sending MRP test frames on ringports. |
| 1.3.6.1.4.1.248.14.5.3.1.19 | ColumnhmMrpMRMTestMonitoringCount | read-only | current | Interval count for monitoring the reception of MRP test frames. |
| 1.3.6.1.4.1.248.14.5.3.1.20 | ColumnhmMrpMRMNonBlockingMRCSupported | read-only | current | Ability of the MRM to support MRC in the ring which have hmMrpMRCBlockedSupported set disabled. enabled(1) indicates that the MRM is able to support MRC in the… |
| 1.3.6.1.4.1.248.14.5.3.1.21 | ColumnhmMrpMRMTestMonitoringExtendedCount | read-only | current | Extended interval count for monitoring the reception of MRP test frames. This value is used by the MRP if hmMrpMRMNonBlockingMRCSupported is is set enabled. |
| 1.3.6.1.4.1.248.14.5.3.1.22 | ColumnhmMrpMRMReactOnLinkChange | read-write | current | Specifies whether the MRM reacts on all MRP link change frames or not. enabled(1) indicates that the MRM reacts on all MRP link change frames. disabled(2) indi… |
| 1.3.6.1.4.1.248.14.5.3.1.23 | ColumnhmMrpMRMCheckMediaRedundancy | read-only | current | Specifies whether monitoring of MRM state is enabled or disabled in the redundancy domain. enabled(1) indicates that the MRM monitors its state. disabled(2) in… |
| 1.3.6.1.4.1.248.14.5.3.1.24 | ColumnhmMrpMRMRealRoleState | read-only | current | Operational role of the MRP entity in the MRP domain. client(1) indicates that the MRP entity is in a MRC role. manager(2) indicates that the MRP entity is the… |
| 1.3.6.1.4.1.248.14.5.3.1.25 | ColumnhmMrpMRMRealRingState | read-only | current | Actual ring state of the redundancy domain. open(1) indicates that the ring is opened. closed(2) indicates that the ring is closed. undefined(3) indicates an u… |
| 1.3.6.1.4.1.248.14.5.3.1.26 | ColumnhmMrpRowStatus | read-create | current | Defines the status of the MRP database entry. |
| 1.3.6.1.4.1.248.14.5.3.1.27 | ColumnhmMrpRedOperState | read-only | current | Operational state of ring redundancy in the MRP domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the MRP domain. redNotGuaranteed(2) in… |
| 1.3.6.1.4.1.248.14.5.3.1.28 | ColumnhmMrpConfigOperState | read-only | current | Operational state of the configuration in the MRP domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that on… |
| 1.3.6.1.4.1.248.14.5.3.1.29 | ColumnhmMrpDomainName | read-write | current | A logical name for the MRP domain to ease the management of MRP domains. |
| 1.3.6.1.4.1.248.14.5.3.1.30 | ColumnhmMrpMRMRecoveryDelay | read-write | current | The MRM defines with its parameter set the maximum recovery delay of ring recovery in the MRP domain. delay500(1) specifies the parameter set for the maximum r… |
| 1.3.6.1.4.1.248.14.5.4 | TablehmRpcTable | not-accessible | current | Every entry in this table contains information about a Ring Protocol Control (RPC) domain. |
| 1.3.6.1.4.1.248.14.5.4.1 | RowhmRpcEntry | not-accessible | current | An entry in the hmRpcTable. |
| 1.3.6.1.4.1.248.14.5.4.1.1 | ColumnhmRpcRingProtocol | read-write | current | Desired version of the ring protocol in the RPC domain. If the value is set to FastHiperRing(3) the entity will run the Fast Hiper Ring protocol. Note: Not all… |
| 1.3.6.1.4.1.248.14.5.4.1.2 | ColumnhmRpcRingID | read-write | current | Identifier of the ring in the RPC domain. |
| 1.3.6.1.4.1.248.14.5.4.1.3 | ColumnhmRpcRingName | read-write | current | Name of the ring in RPC domain. |
| 1.3.6.1.4.1.248.14.5.4.1.4 | ColumnhmRpcRingport1GroupID | read-write | current | Unique index to identify the slot number of ringport 1 in the RPC domain. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.4.1.5 | ColumnhmRpcRingport1IfIndex | read-write | current | Interface index of ringport 1 in the RPC domain. |
| 1.3.6.1.4.1.248.14.5.4.1.6 | ColumnhmRpcRingport1OperState | read-only | current | Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by th… |
| 1.3.6.1.4.1.248.14.5.4.1.7 | ColumnhmRpcRingport2GroupID | read-write | current | Unique index to identify the slot number of ringport 2 in the RPC domain. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.4.1.8 | ColumnhmRpcRingport2IfIndex | read-write | current | Interface index of ringport 2 in the RPC domain. |
| 1.3.6.1.4.1.248.14.5.4.1.9 | ColumnhmRpcRingport2OperState | read-only | current | Operational state of ringport 2. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by th… |
| 1.3.6.1.4.1.248.14.5.4.1.10 | ColumnhmRpcVlanID | read-write | current | VLAN identifier of the RPC domain. If value is set to 0 no VLAN is assigned. |
| 1.3.6.1.4.1.248.14.5.4.1.11 | ColumnhmRpcAdminState | read-write | current | Admin state of the entity in the RPC domain. If the value is set to client(1) the entity will be in the role of a redundancy client. If the value is set to man… |
| 1.3.6.1.4.1.248.14.5.4.1.12 | ColumnhmRpcOperState | read-only | current | Operational state of the entity in the RPC domain. client(1) indicates that the entity is in the role of a redundancy client. manager(2) indicates that the ent… |
| 1.3.6.1.4.1.248.14.5.4.1.13 | ColumnhmRpcRingOperState | read-only | current | Operational state of the ring in the RPC domain. undefined(1) indicates either an undefined ring state or the entity may have the role of a redundancy client. … |
| 1.3.6.1.4.1.248.14.5.4.1.14 | ColumnhmRpcRedundancyOperState | read-only | current | Operational state of the ring redundancy in the RPC domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the RPC domain. redNotGuaranteed(2… |
| 1.3.6.1.4.1.248.14.5.4.1.15 | ColumnhmRpcConfigOperState | read-only | current | Operational state of the configuration in the RPC domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that th… |
| 1.3.6.1.4.1.248.14.5.4.1.16 | ColumnhmRpcRowStatus | read-create | current | Defines the status of the RPC database entry. |
| 1.3.6.1.4.1.248.14.5.4.1.17 | ColumnhmRpcNodes | read-write | current | Manager only: number of nodes in the RPC ring. |
| 1.3.6.1.4.1.248.14.5.4.1.18 | ColumnhmRpcRoundTripDelay | read-only | current | Manager only: maximum Round-Trip-Delay (in microseconds) which was measured since the RowStatus of the RPC domain has been set active. |
| 1.3.6.1.4.1.248.14.5.5 | NodehmMultiHiperRing | |||
| 1.3.6.1.4.1.248.14.5.5.1 | ScalarhmSrmMaxInstances | read-only | current | Maximum number of supported SRM instances in the hmSrmTable. |
| 1.3.6.1.4.1.248.14.5.5.5 | TablehmSrmTable | not-accessible | current | Every entry in this table contains information about a Sub-Ring Manager (SRM) domain in the Multi HIPER Ring. |
| 1.3.6.1.4.1.248.14.5.5.5.1 | RowhmSrmEntry | not-accessible | current | An entry in the hmSrmTable. |
| 1.3.6.1.4.1.248.14.5.5.5.1.1 | ColumnhmSrmRingID | read-write | current | Identifier of the sub-ring in the SRM domain. |
| 1.3.6.1.4.1.248.14.5.5.5.1.2 | ColumnhmSrmRingProtocol | read-write | current | If the value is set to standardMRP(4) the entity will run the MRP protocol. Note: If using standardMRP(4) all clients in the sub-ring segment must run MRP acco… |
| 1.3.6.1.4.1.248.14.5.5.5.1.3 | ColumnhmSrmRingName | read-write | current | Name of the sub-ring in SRM domain. |
| 1.3.6.1.4.1.248.14.5.5.5.1.4 | ColumnhmSrmRingport1GroupID | read-write | current | Unique index to identify the slot number of ringport 1 in the SRM domain. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.5.5.1.5 | ColumnhmSrmRingport1IfIndex | read-write | current | Interface index of ringport 1 in the SRM domain. |
| 1.3.6.1.4.1.248.14.5.5.5.1.6 | ColumnhmSrmRingport1OperState | read-only | current | Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by th… |
| 1.3.6.1.4.1.248.14.5.5.5.1.7 | ColumnhmSrmVlanID | read-write | current | VLAN identifier of the SRM domain. If value is set to 0 no VLAN is assigned. |
| 1.3.6.1.4.1.248.14.5.5.5.1.8 | ColumnhmSrmAdminState | read-write | current | Admin state of the entity in the SRM domain. If the value is set to manager(1) the entity will be in the role of a Sub-Ring Manager in the Multi HIPER Ring. If… |
| 1.3.6.1.4.1.248.14.5.5.5.1.9 | ColumnhmSrmOperState | read-only | current | Operational state of the entity in the SRM domain. manager(1) indicates that the entity is in the role of a Sub-Ring Manager in the Multi HIPER Ring. redundant… |
| 1.3.6.1.4.1.248.14.5.5.5.1.10 | ColumnhmSrmRingOperState | read-only | current | Operational state of the sub-ring in the SRM domain. undefined(1) indicates an undefined sub-ring state. open(2) indicates that the sub-ring is opened. closed(… |
| 1.3.6.1.4.1.248.14.5.5.5.1.11 | ColumnhmSrmRedundancyOperState | read-only | current | Operational state of the ring redundancy in the SRM domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the SRM domain. redNotGuaranteed(2… |
| 1.3.6.1.4.1.248.14.5.5.5.1.12 | ColumnhmSrmConfigOperState | read-only | current | Operational state of the configuration in the SRM domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that th… |
| 1.3.6.1.4.1.248.14.5.5.5.1.13 | ColumnhmSrmRowStatus | read-create | current | Defines the status of the SRM database entry. |
| 1.3.6.1.4.1.248.14.5.5.5.1.14 | ColumnhmSrmNodes | read-write | current | Number of nodes in the sub-ring. Note: Will get neccessary if the SRM runs on a fpga. |
| 1.3.6.1.4.1.248.14.5.5.5.1.15 | ColumnhmSrmMRPDomainID | read-write | current | Only for MRP: Universally unique identifier belongs to the MRP domain which represents a sub-ring. |
| 1.3.6.1.4.1.248.14.5.5.5.1.16 | ColumnhmSrmPartnerMAC | read-only | current | The MAC address of the partner Sub-Ring Manager in the same sub-ring domain. |
| 1.3.6.1.4.1.248.14.5.5.5.1.17 | ColumnhmSrmRecoveryDelay | read-write | current | The maximum recovery delay of ring recovery in the SRM domain. delay300(1) specifies the parameter set for the maximum recovery delay of 300ms in the SRM domai… |