HMRINGARC-MGMT-SNMP-MIB
29 objects
The Hirschmann Private Automatic Ring Configuration MIB definitions.
Imported Objects
| HMRING-MGMT-SNMP-MIB | hmRingRedundancy |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.14.5.7 | IdentityhmARC | The Hirschmann Private Automatic Ring Configuration MIB definitions. | ||
| 1.3.6.1.4.1.248.14.5.7.1 | NodehmArcManagerConfig | |||
| 1.3.6.1.4.1.248.14.5.7.1.1 | ScalarhmArcManagerAdminStatus | read-write | current | The administratively desired status of the ARC manager. enabled(1): ARC manager is active, the device can check and configure other ARC devices. disabled(2): A… |
| 1.3.6.1.4.1.248.14.5.7.1.2 | ScalarhmArcManagerRedProtocol | read-write | current | The ring redundancy protocol the clients will be configured for. Parameters like VLAN ID and timings are taken from the current redundancy manager configuratio… |
| 1.3.6.1.4.1.248.14.5.7.1.3 | ScalarhmArcManagerPrimGroupID | read-only | current | Unique index to identify the slot number of the primary link of the ARC manager. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.7.1.4 | ScalarhmArcManagerPrimIfIndex | read-only | current | Interface index of the primary link of the ARC manager. |
| 1.3.6.1.4.1.248.14.5.7.1.5 | ScalarhmArcManagerRedGroupID | read-only | current | Unique index to identify the slot number of the redundant link of the ARC manager. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.7.1.6 | ScalarhmArcManagerRedIfIndex | read-only | current | Interface index of the redundant link of the ARC manager. |
| 1.3.6.1.4.1.248.14.5.7.1.7 | ScalarhmArcManagerVlanID | read-only | current | VLAN identifier of the ARC manager. If value is set to 0 no VLAN is assigned. |
| 1.3.6.1.4.1.248.14.5.7.1.8 | ScalarhmArcManagerAction | read-write | current | The actions the ARC manager is able to activate. This object, when read, returns noAction(1) if no action is currently running. checkTopology(2): Checks the to… |
| 1.3.6.1.4.1.248.14.5.7.1.9 | ScalarhmArcManagerActionResult | read-only | current | Result of the last activated action. noAction(1): Initial state, no action started. pending(2): A topology check or a configuration process is going on. closed… |
| 1.3.6.1.4.1.248.14.5.7.2 | NodehmArcManagerStatus | |||
| 1.3.6.1.4.1.248.14.5.7.2.1 | TablehmArcCheckResultTable | not-accessible | current | Every entry in this table contains information about the status of the network topology reported by the ARC devices. |
| 1.3.6.1.4.1.248.14.5.7.2.1.1 | RowhmArcCheckResultEntry | not-accessible | current | An entry in the hmArcCheckResultTable. |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.1 | ColumnhmArcCheckStatusIndex | read-only | current | Index for the table |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.2 | ColumnhmArcCheckStatusDeviceMac | read-only | current | The MAC address of the ARC device that reported the status. |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.3 | ColumnhmArcCheckStatusDeviceIp | read-only | current | The IP address of the ARC device that reported the status. |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.4 | ColumnhmArcCheckStatusType | read-only | current | The status an ARC device in the connected topology reported. otherRm(1): the device detected another active Redundancy Manager. loop(2): unclear topology detec… |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.5 | ColumnhmArcCheckStatusInfo | read-only | current | Additional information about the ARC device status. The device may provide this information for each value in hmArcCheckStatusType. |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.6 | ColumnhmArcCheckStatusClassification | read-only | current | Classification of the status the ARC device reported. error(1): the reported status is an error. warning(2): the reported status is a warning. ok(3): the repor… |
| 1.3.6.1.4.1.248.14.5.7.3 | NodehmArcClientConfig | |||
| 1.3.6.1.4.1.248.14.5.7.3.1 | ScalarhmArcClientAdminStatus | read-write | current | The administratively desired status of the ARC client. enabled(1): ARC client is active, the device can be configured automatically and can return a status on … |
| 1.3.6.1.4.1.248.14.5.7.4 | NodehmArcClientStatus | |||
| 1.3.6.1.4.1.248.14.5.7.4.1 | ScalarhmArcClientManagerDeviceMac | read-only | current | The MAC address of the ARC manager that last checked or configured the device. |
| 1.3.6.1.4.1.248.14.5.7.4.2 | ScalarhmArcClientManagerDeviceIp | read-only | current | The IP address of the ARC manager that last checked or configured the device. |
| 1.3.6.1.4.1.248.14.5.7.4.3 | ScalarhmArcClientPrimGroupID | read-only | current | Unique index to identify the slot number of the to be configured primary link port. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.7.4.4 | ScalarhmArcClientPrimIfIndex | read-only | current | Interface index of the to be configured primary link. |
| 1.3.6.1.4.1.248.14.5.7.4.5 | ScalarhmArcClientRedGroupID | read-only | current | Unique index to identify the slot number of the to be configured redundant link port. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.5.7.4.6 | ScalarhmArcClientRedIfIndex | read-only | current | Interface index of the to be configured redundant link. |