HMSECURITY2-MIB
591 objects
The Hirschmann Private Security MIB definitions.
Imported Objects
| HMPRIV-MGMT-SNMP-MIB | hmLastIpAddr hmLastLoginUserName |
| INET-ADDRESS-MIB | InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMP-TARGET-MIB | SnmpTagList SnmpTagValue |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus TestAndIncr TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.52 | IdentityhmSecurity2 | The Hirschmann Private Security MIB definitions. | ||
| 1.3.6.1.4.1.248.52.0 | IdentityhmSecurity2Event | current | The events of hmSecurity2. | |
| 1.3.6.1.4.1.248.52.0.1 | NotificationhmSec2DHCPNewClientTrap | current | This trap is sent when a DHCP request was received from an unknown client using DHCP. | |
| 1.3.6.1.4.1.248.52.0.2 | NotificationhmSec2RedundSwitchTrap | current | This trap is sent when the redundancy state changes on the device (Master <-> Backup). | |
| 1.3.6.1.4.1.248.52.0.3 | NotificationhmSec2VpnDownTrap | current | A hmSec2VpnDown trap signals that a VPN connection is about to enter the down state from some other state (see 'hmSec2VpnConnOperStatus'). | |
| 1.3.6.1.4.1.248.52.0.4 | NotificationhmSec2VpnUpTrap | current | A hmSec2VpnUp trap signals that a VPN connection is about to enter the up state from some other state (see 'hmSec2VpnConnOperStatus'). | |
| 1.3.6.1.4.1.248.52.0.5 | NotificationhmSec2LoginSuccessTrap | current | This trap is sent if a user successfully grants access via telnet, ssh or serial connection to the device. hmLastIpAddr contains the IP address of the login re… | |
| 1.3.6.1.4.1.248.52.0.6 | NotificationhmSec2LoginFailedTrap | current | This trap is sent if a user tried to grant access via telnet, ssh or serial connection to the device. hmLastIpAddr contains the IP address of the login request… | |
| 1.3.6.1.4.1.248.52.0.10 | NotificationhmSec2UsrFwLogInTrap | current | A hmSec2UsrFwLogInTrap trap signals that a firewal user is logged in (see 'hmSec2UsrFwUserName', 'hmSec2UsrFwUserLoginAddr'). | |
| 1.3.6.1.4.1.248.52.0.11 | NotificationhmSec2UsrFwLogOutTrap | current | A hmSec2UsrFwLogInTrap trap signals that a firewal user is logged out (see 'hmSec2UsrFwUserName', 'hmSec2UsrFwUserLoginAddr'). | |
| 1.3.6.1.4.1.248.52.0.12 | NotificationhmSec2UsrFwLogErrTrap | current | A hmSec2UsrFwLogInTrap trap signals that a firewal user login is failed (see 'hmSec2UsrFwUserName', 'hmSec2UsrFwUserLoginAddr'). | |
| 1.3.6.1.4.1.248.52.0.15 | NotificationhmSec2FirewallLogTrap | current | This trap is sent if the 'Log' object of a firewall rule has been set to 'logAndTrap', and the rule matches. 'hmSec2MiscTrapText' is a copy of the log message … | |
| 1.3.6.1.4.1.248.52.1 | NodehmSecurity2Objects | |||
| 1.3.6.1.4.1.248.52.1.1 | NodehmSec2Device | |||
| 1.3.6.1.4.1.248.52.1.2 | NodehmSec2Agent | |||
| 1.3.6.1.4.1.248.52.1.2.3 | NodehmSec2WebGroup | |||
| 1.3.6.1.4.1.248.52.1.2.3.1 | ScalarhmSec2WebLoginAccessWeb | read-write | current | Enables/Disables Web access to the device. |
| 1.3.6.1.4.1.248.52.1.2.3.2 | ScalarhmSec2WebLoginTimeoutWeb | read-write | current | Timeout for Web connections in minutes. |
| 1.3.6.1.4.1.248.52.1.2.3.6 | ScalarhmSec2WebHttpsPortNumber | read-write | current | The port number of the https web server. To activate the port number the device has to be restarted. |
| 1.3.6.1.4.1.248.52.1.2.3.7 | ScalarhmSec2WebSNMPoverHTTPS | read-write | current | Enables/Disables Web tunneling SNMP over HTTPS. |
| 1.3.6.1.4.1.248.52.1.2.3.8 | ScalarhmSec2WebHttpsCertFingerPrintType | read-write | current | Controls HTTPS certificate fingerprint generation. If set to 'sha1' hmSec2WebHttpsCertFingerPrint will show the SHA1 fingerprint of the certificate. |
| 1.3.6.1.4.1.248.52.1.2.3.9 | ScalarhmSec2WebHttpsCertFingerPrint | read-only | current | The HTTPS certificate fingerprint as hash. The type of the hash is defined with hmSec2WebHttpsCertFingerPrintType. |
| 1.3.6.1.4.1.248.52.1.2.4 | NodehmSec2CliGroup | |||
| 1.3.6.1.4.1.248.52.1.2.4.1 | ScalarhmSec2CliLoginPrompt | read-write | current | Prompt string for the command line interface. |
| 1.3.6.1.4.1.248.52.1.2.4.2 | ScalarhmSec2CliLoginTimeoutSerial | read-write | current | Timeout for serial connections in minutes. If the value is set to 0, there will be no idle logout at all. |
| 1.3.6.1.4.1.248.52.1.2.4.3 | ScalarhmSec2CliLoginTimeoutSSH | read-write | current | Timeout for SSH connections in minutes. |
| 1.3.6.1.4.1.248.52.1.2.4.4 | ScalarhmSec2CliLoginTimeoutTelnet | read-write | current | Timeout for Telnet connections in minutes. |
| 1.3.6.1.4.1.248.52.1.2.4.6 | ScalarhmSec2CliLoginAccessSSH | read-write | current | Enables/Disables CLI access to the device over SSH. |
| 1.3.6.1.4.1.248.52.1.2.4.7 | ScalarhmSec2CliLoginAccessTelnet | read-write | current | Enables/Disables CLI access to the device over Telnet. |
| 1.3.6.1.4.1.248.52.1.2.4.8 | ScalarhmSec2CliLoginSshPortNumber | read-write | current | The port number of the ssh login server. To activate the port number the device has to be restarted. |
| 1.3.6.1.4.1.248.52.1.2.4.9 | ScalarhmSec2CliLoginFingerPrintDSA | read-only | current | The local DSA fingerprint for SSH connections. |
| 1.3.6.1.4.1.248.52.1.2.4.10 | ScalarhmSec2CliLoginFingerPrintRSA | read-only | current | The local RSA fingerprint for SSH connections. |
| 1.3.6.1.4.1.248.52.1.2.4.11 | ScalarhmSec2CliLoginDefaultPasswordActive | read-only | current | This variable displays if there are currently default passwords set for priviledged users. |
| 1.3.6.1.4.1.248.52.1.2.5 | NodehmSec2FileManagementGroup | |||
| 1.3.6.1.4.1.248.52.1.2.5.1 | NodehmSec2FileManagementActionGroup | |||
| 1.3.6.1.4.1.248.52.1.2.5.1.1 | ScalarhmSec2FMActionType | read-write | current | Type of the action to be performed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.2 | ScalarhmSec2FMActionItemType | read-write | current | Type of the item to be processed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.3 | ScalarhmSec2FMActionSourceType | read-write | current | Type of the source object to be processed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.4 | ScalarhmSec2FMActionSourceData | read-write | current | Additional Data for the source object. This could be a profile name or URL |
| 1.3.6.1.4.1.248.52.1.2.5.1.5 | ScalarhmSec2FMActionDestinationType | read-write | current | Type of the destination object to be processed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.6 | ScalarhmSec2FMActionDestinationData | read-write | current | Additional Data for the source object. This could be a profile name or URL |
| 1.3.6.1.4.1.248.52.1.2.5.1.7 | ScalarhmSec2FMActionActivate | read-write | current | If set to activate(2), the action will be started. When read, this variable returns always other(1). |
| 1.3.6.1.4.1.248.52.1.2.5.1.8 | ScalarhmSec2FMActionActivateResult | read-only | current | Either returns ok(1) if the action is successfully started or param-error(2) if there is some problem with the given parameters or returns busy(3) if there is … |
| 1.3.6.1.4.1.248.52.1.2.5.1.9 | ScalarhmSec2FMActionActivateResultText | read-only | current | Text describing why the start of the operation has failed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.10 | ScalarhmSec2FMActionStatus | read-only | current | Returns the running status of the action. |
| 1.3.6.1.4.1.248.52.1.2.5.1.11 | ScalarhmSec2FMActionPercentReady | read-only | current | Estimation of how many percent of the operation is done. |
| 1.3.6.1.4.1.248.52.1.2.5.1.12 | ScalarhmSec2FMActionResult | read-only | current | Error Status of the last action which has been performed. |
| 1.3.6.1.4.1.248.52.1.2.5.1.13 | ScalarhmSec2FMActionResultText | read-only | current | either OK or a descriptive text giving a reason why the last operation failed |
| 1.3.6.1.4.1.248.52.1.2.5.2 | NodehmSec2FileManagementProfileGroup | |||
| 1.3.6.1.4.1.248.52.1.2.5.2.1 | TablehmSec2FMNvProfileTable | not-accessible | current | A list of Profiles stored in NV memory. |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1 | RowhmSec2FMNvProfileEntry | not-accessible | current | A profile entry. |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1.1 | ColumnhmSec2FMNvProfileIndex | read-only | current | Index of the profile entry. |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1.2 | ColumnhmSec2FMNvProfileName | read-only | current | name of entry consisting of alphanumeric characters plus hyphen and underscore. |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1.3 | ColumnhmSec2FMNvProfileDateTime | read-only | current | Time and Date of last write access using the content of the variable hmSystemTime. |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1.4 | ColumnhmSec2FMNvProfileActive | read-write | current | Setting the variable to active(1) enables the profile so that it will be used the next time the configuration is reloaded. Setting the value to inactive(2) is … |
| 1.3.6.1.4.1.248.52.1.2.5.2.1.1.5 | ColumnhmSec2FMNvProfileAction | read-write | current | Action to be performed on the profile entry. setting the value to delete(2) erases the profile. If it was the active profile then the first entry in the list b… |
| 1.3.6.1.4.1.248.52.1.2.5.2.2 | TablehmSec2FMAcaProfileTable | not-accessible | current | A list of Profiles stored in NV memory. |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1 | RowhmSec2FMAcaProfileEntry | not-accessible | current | A profile entry. |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1.1 | ColumnhmSec2FMAcaProfileIndex | read-only | current | Index of the profile entry. |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1.2 | ColumnhmSec2FMAcaProfileName | read-only | current | name of entry consisting of alphanumeric characters plus hyphen and underscore. |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1.3 | ColumnhmSec2FMAcaProfileDateTime | read-only | current | Time and Date of last write access using the content of the variable hmSystemTime. |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1.4 | ColumnhmSec2FMAcaProfileActive | read-write | current | Setting the variable to active(1) enables the profile so that it will be used the next time the configuration is reloaded. Setting the value to inactive(2) is … |
| 1.3.6.1.4.1.248.52.1.2.5.2.2.1.5 | ColumnhmSec2FMAcaProfileAction | read-write | current | Action to be performed on the profile entry. setting the value to delete(2) erases the profile. Reading the variable always returns other(1). |
| 1.3.6.1.4.1.248.52.1.2.5.3 | NodehmSec2FileManagementStatusGroup | |||
| 1.3.6.1.4.1.248.52.1.2.5.3.1 | ScalarhmSec2FMNvState | read-only | current | This variable returns ok(1) if the contents of the running-config is the same as the currently, out-of-sync(2) if there are any differences. used configuration… |
| 1.3.6.1.4.1.248.52.1.2.5.3.2 | ScalarhmSec2FMAcaState | read-only | current | This variable returns ok(1) if the contents of the currently used configuration on the ACA is the same than that stored in NV memory, out-of-sync(2) if there a… |
| 1.3.6.1.4.1.248.52.1.2.10 | NodehmSec2LoggingGroup | |||
| 1.3.6.1.4.1.248.52.1.2.10.1 | NodehmSec2LoggingGeneral | |||
| 1.3.6.1.4.1.248.52.1.2.10.1.1 | ScalarhmSec2SyslogServerIPAddr | read-write | current | IP address of syslog server for logging. Set this value to 0.0.0.0 to disable transmission to syslog server. |
| 1.3.6.1.4.1.248.52.1.2.10.1.2 | ScalarhmSec2SyslogServerUdpPort | read-write | current | UDP port used for syslog server transmission. If this value is zero then the default port 514 is used. |
| 1.3.6.1.4.1.248.52.1.2.10.1.3 | ScalarhmSec2LogPermFileSize | read-write | current | Maximum persistent logfile size on ACA in Kbytes (0..4096). If this value is zero logging is disabled. |
| 1.3.6.1.4.1.248.52.1.2.10.1.4 | ScalarhmSec2LogPermFilesMax | read-write | current | Maximum number of persistent logfiles on ACA (0..99). If this value is zero logging and archiving is disabled. |
| 1.3.6.1.4.1.248.52.1.2.10.1.5 | ScalarhmSec2LogPermFilesLock | read-write | current | Enable locking of persistent logfiles on ACA. If it is enabled the ACA could be plugged-in/out securely. |
| 1.3.6.1.4.1.248.52.1.2.10.1.6 | ScalarhmSec2SyslogServer2IPAddr | read-write | current | IP address of second syslog server for logging. Set this value to 0.0.0.0 to disable transmission to syslog server. |
| 1.3.6.1.4.1.248.52.1.2.10.1.7 | ScalarhmSec2SyslogServer2UdpPort | read-write | current | UDP port used for second syslog server transmission. If this value is zero then the default port 514 is used. |
| 1.3.6.1.4.1.248.52.1.2.10.2 | TablehmSec2LogLevelTable | not-accessible | current | A list of log levels for various log categories |
| 1.3.6.1.4.1.248.52.1.2.10.2.1 | RowhmSec2LogLevelEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.2.10.2.1.1 | ColumnhmSec2LogLevelIndex | read-only | current | An index that uniquely identifies the entry in the table and so the log facility. |
| 1.3.6.1.4.1.248.52.1.2.10.2.1.2 | ColumnhmSec2LogLevelUpto | read-write | current | Log level |
| 1.3.6.1.4.1.248.52.1.2.10.2.1.3 | ColumnhmSec2LogLevelName | read-only | current | Name of log facility |
| 1.3.6.1.4.1.248.52.1.2.10.2.1.4 | ColumnhmSec2LogLevelDesc | read-only | current | Description of log facility |
| 1.3.6.1.4.1.248.52.1.2.10.2.1.5 | ColumnhmSec2LogLevelPerm | read-write | current | Enable logging to persistent logfile on ACA for log facility |
| 1.3.6.1.4.1.248.52.1.2.20 | NodehmSec2UserConfigGroup | |||
| 1.3.6.1.4.1.248.52.1.2.20.1 | TablehmSec2UserConfigTable | not-accessible | current | User Config Table. This table provides the functionality the system uses for any interaction started by the user - Authentication, Encryption - changing authen… |
| 1.3.6.1.4.1.248.52.1.2.20.1.1 | RowhmSec2UserConfigEntry | not-accessible | current | User Config Entry |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.1 | ColumnhmSec2UserName | not-accessible | current | Agent User Name. |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.2 | ColumnhmSec2UserPassword | read-write | current | Agent User Password This object will always return '********' even if a password is set. The User Password can be set while the row is active. |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.3 | ColumnhmSec2UserAccessMode | read-write | current | Agent User Access Mode. The User Access Mode can be set while the row is active. |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.4 | ColumnhmSec2UserSnmpAuthenticationType | read-write | current | SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(0). - none… |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.5 | ColumnhmSec2UserSnmpEncryptionType | read-write | current | SNMPv3 User Encryption Can not be set to des(2) or aes-cfb-128(3) if hmSec2UserSnmpAuthenticationType is set to none(0). - none(0) -> no encryption used - des(… |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.6 | ColumnhmSec2UserAuthenticationList | read-write | current | The authentication list used for this user to authenticate to the system. The User Authentication List can be set while the row is active. |
| 1.3.6.1.4.1.248.52.1.2.20.1.1.7 | ColumnhmSec2UserStatus | read-write | current | Agent User Status. active(1) - This user account is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) -… |
| 1.3.6.1.4.1.248.52.1.2.30 | NodehmSec2UserAuthListGroup | |||
| 1.3.6.1.4.1.248.52.1.2.30.1 | TablehmSec2UserAuthListTable | not-accessible | current | The hmSec2UserAuthListTable holds up to 3 policies a user authenticates to the system. |
| 1.3.6.1.4.1.248.52.1.2.30.1.1 | RowhmSec2UserAuthListEntry | not-accessible | current | The hmSec2UserAuthListEntry. |
| 1.3.6.1.4.1.248.52.1.2.30.1.1.1 | ColumnhmSec2UserAuthListName | not-accessible | current | Authentication List Index Unique name used for indexing into this table. |
| 1.3.6.1.4.1.248.52.1.2.30.1.1.2 | ColumnhmSec2UserAuthListPolicy1 | read-write | current | Authenticion List Policy 1 Configures the first authentication policy to use when this list is specified. - none -> no authentication policy set - local -> aut… |
| 1.3.6.1.4.1.248.52.1.2.30.1.1.3 | ColumnhmSec2UserAuthListPolicy2 | read-write | current | Authenticion List Policy 2 Configures the second authentication policy to use when this list is specified. - none -> no authentication policy set - local -> au… |
| 1.3.6.1.4.1.248.52.1.2.30.1.1.4 | ColumnhmSec2UserAuthListPolicy3 | read-write | current | Authenticion List Policy 3 Configures the third authentication policy to use when this list is specified. - none -> no authentication policy set - local -> aut… |
| 1.3.6.1.4.1.248.52.1.2.30.1.1.5 | ColumnhmSec2UserAuthListStatus | read-write | current | The status of the Authentication List. active(1) - This auth list is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values.… |
| 1.3.6.1.4.1.248.52.1.2.30.2 | ScalarhmSec2UserAuthListDefault | read-write | current | Default System Login Authentication List This object configures the Authentication List to be used for non-configured users for System Login. An empty string m… |
| 1.3.6.1.4.1.248.52.1.2.30.3 | ScalarhmSec2UserFirewallAuthListDefault | read-write | current | Default User Firewall Login Authentication List This object configures the Authentication List to be used for non-configured users for User Firewall Login. An … |
| 1.3.6.1.4.1.248.52.1.2.40 | NodehmSec2UsrFwUserGroup | |||
| 1.3.6.1.4.1.248.52.1.2.40.1 | ScalarhmSec2UsrFwUserGroupAuth | read-write | current | Enables/Disables Group Authentication for User Firewall users. |
| 1.3.6.1.4.1.248.52.1.2.40.2 | TablehmSec2UsrFwUserTable | not-accessible | current | Firewall User Config Table. This table provides the functionality the system uses for Firewal Users management. To create a new user set hmSec2UsrFwUserStatus … |
| 1.3.6.1.4.1.248.52.1.2.40.2.1 | RowhmSec2UsrFwUserEntry | not-accessible | current | User Config Entry |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.1 | ColumnhmSec2UsrFwUserName | read-only | current | Firewall User Name. |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.2 | ColumnhmSec2UsrFwUserPassword | read-write | current | Firewall User Password This object will always return '********' even if a password is set. The User Password can be set while the row is active. |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.3 | ColumnhmSec2UsrFwUserAuthList | read-write | current | The authentication list used for this user to authenticate to the system. The User Authentication List can be set while the row is active. |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.4 | ColumnhmSec2UsrFwUserLoginStatus | read-write | current | Log-in status of the firewall user. |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.5 | ColumnhmSec2UsrFwUserLoginAddr | read-only | current | The IP address the firewall user logged in from, or epty string if the user isn't logged in. |
| 1.3.6.1.4.1.248.52.1.2.40.2.1.6 | ColumnhmSec2UsrFwUserStatus | read-write | current | Firewall User Status. active(1) - This user account is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4… |
| 1.3.6.1.4.1.248.52.1.2.40.3 | ScalarhmSec2UsrFwUserStateRemoval | read-write | current | Set to remove or keep the Firewall state entries for User Firewall users at Logout. |
| 1.3.6.1.4.1.248.52.1.3 | NodehmSec2Security | |||
| 1.3.6.1.4.1.248.52.1.3.1 | NodehmSec2Radius | |||
| 1.3.6.1.4.1.248.52.1.3.1.1 | NodehmSec2RadiusClient | |||
| 1.3.6.1.4.1.248.52.1.3.1.1.1 | ScalarhmSec2RadiusMaxRetries | read-write | current | Maximum number of retransmissions of a radius request packet |
| 1.3.6.1.4.1.248.52.1.3.1.1.2 | ScalarhmSec2RadiusTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted |
| 1.3.6.1.4.1.248.52.1.3.1.1.10 | TablehmSec2RadiusAuthServerTable | not-accessible | current | List of radius authentication servers. The priority of a server depends on the position in the table, i.e. the primary server is the first one in the table, th… |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1 | RowhmSec2RadiusAuthServerEntry | not-accessible | current | A radius authentication server entry. |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1.1 | ColumnhmSec2RadiusAuthServerIndex | not-accessible | current | Table index. |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1.2 | ColumnhmSec2RadiusAuthServerAddress | read-write | current | IP address of the radius authentication server. |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1.3 | ColumnhmSec2RadiusAuthServerPort | read-write | current | Port number of the radius authentication server. |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1.4 | ColumnhmSec2RadiusAuthServerSecret | read-write | current | Shared secret for the radius authentication server. |
| 1.3.6.1.4.1.248.52.1.3.1.1.10.1.5 | ColumnhmSec2RadiusAuthServerStatus | read-write | current | Row status of this entry: active(1) - Authentication entry is active. notInService(2) - Entry has been suspended. |
| 1.3.6.1.4.1.248.52.1.11 | NodehmSec2Firewall | |||
| 1.3.6.1.4.1.248.52.1.11.1 | NodehmSec2FirewallDenialOfServiceGroup | |||
| 1.3.6.1.4.1.248.52.1.11.1.1 | NodehmSec2FirewallDenialOfServiceVars | |||
| 1.3.6.1.4.1.248.52.1.11.1.1.1 | ScalarhmSec2FwDosInSynLimit | read-write | current | Maximum number of new incoming TCP connections (SYN) per second. |
| 1.3.6.1.4.1.248.52.1.11.1.1.2 | ScalarhmSec2FwDosOutSynLimit | read-write | current | Maximum number of new outgoing TCP connections (SYN) per second. |
| 1.3.6.1.4.1.248.52.1.11.1.1.3 | ScalarhmSec2FwDosInPingLimit | read-write | current | Maximum number of incoming ping frames (ICMP Echo Request) per second. |
| 1.3.6.1.4.1.248.52.1.11.1.1.4 | ScalarhmSec2FwDosOutPingLimit | read-write | current | Maximum number of outgoing ping frames (ICMP Echo Request) per second |
| 1.3.6.1.4.1.248.52.1.11.1.1.5 | ScalarhmSec2FwDosInArpLimit | read-write | current | Maximum number of incoming ARP frames per second. |
| 1.3.6.1.4.1.248.52.1.11.1.1.6 | ScalarhmSec2FwDosOutArpLimit | read-write | current | Maximum number of outgoing ARP frames per second. |
| 1.3.6.1.4.1.248.52.1.11.1.1.7 | ScalarhmSec2FwDosInSynLimitLog | read-write | current | Enables or disables logging for incoming DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.1.1.8 | ScalarhmSec2FwDosOutSynLimitLog | read-write | current | Enables or disables logging for outgoing DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.1.1.9 | ScalarhmSec2FwDosInPingLimitLog | read-write | current | Enables or disables logging for incoming DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.1.1.10 | ScalarhmSec2FwDosOutPingLimitLog | read-write | current | Enables or disables logging for outgoing DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.1.1.11 | ScalarhmSec2FwDosInArpLimitLog | read-write | current | Enables or disables logging for incoming DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.1.1.12 | ScalarhmSec2FwDosOutArpLimitLog | read-write | current | Enables or disables logging for outgoing DOS rules. |
| 1.3.6.1.4.1.248.52.1.11.2 | NodehmSec2FirewallL2PacketFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.2.1 | NodehmSec2FirewallL2PfIncomingGroup | |||
| 1.3.6.1.4.1.248.52.1.11.2.1.1 | TablehmSec2FwL2PfInTable | not-accessible | current | A list of MAC rules for incoming traffic. |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1 | RowhmSec2FwL2PfInEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.1 | ColumnhmSec2FwL2PfInIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.2 | ColumnhmSec2FwL2PfInSrcAddr | read-write | current | Single MAC address aa:bb:cc:dd:ee:ff or address with wildcards aa:bb:??:dd:ee:ff or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.4 | ColumnhmSec2FwL2PfInDstAddr | read-write | current | Single MAC address aa:bb:cc:dd:ee:ff or address with wildcards aa:bb:??:dd:ee:ff or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.6 | ColumnhmSec2FwL2PfInProto | read-write | current | The Ethernet protocol as a hexadecimal number in range 0000 - FFFF or the keyword 'any' for protocol-independent filtering. |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.7 | ColumnhmSec2FwL2PfInAction | read-write | current | Action to be performed if the filter rule matches |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.8 | ColumnhmSec2FwL2PfInLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.9 | ColumnhmSec2FwL2PfInDesc | read-write | current | user defined text |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.10 | ColumnhmSec2FwL2PfInErrorText | read-only | current | error text |
| 1.3.6.1.4.1.248.52.1.11.2.1.1.1.11 | ColumnhmSec2FwL2PfInRowStatus | read-write | current | the row status for the table entry |
| 1.3.6.1.4.1.248.52.1.11.2.2 | NodehmSec2FirewallL2PfOutgoingGroup | |||
| 1.3.6.1.4.1.248.52.1.11.2.2.1 | TablehmSec2FwL2PfOutTable | not-accessible | current | A list of the MAC rules for outgoing traffic |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1 | RowhmSec2FwL2PfOutEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.1 | ColumnhmSec2FwL2PfOutIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.2 | ColumnhmSec2FwL2PfOutSrcAddr | read-write | current | Single address aa:bb:cc:dd:ee:ff or address with wildcards aa:bb:??:dd:ee:ff or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.4 | ColumnhmSec2FwL2PfOutDstAddr | read-write | current | Single address aa:bb:cc:dd:ee:ff or address with wildcards aa:bb:??:dd:ee:ff or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.6 | ColumnhmSec2FwL2PfOutProto | read-write | current | The Ethernet protocol as a hexdecimal number in range 0000 - FFFF or the keyword 'any' for protocol-independent filtering. |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.7 | ColumnhmSec2FwL2PfOutAction | read-write | current | Action to be performed if the firewall rule matches |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.8 | ColumnhmSec2FwL2PfOutLog | read-write | current | Enables or disables logging for packets matching this rule |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.9 | ColumnhmSec2FwL2PfOutDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.10 | ColumnhmSec2FwL2PfOutErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.2.2.1.1.11 | ColumnhmSec2FwL2PfOutRowStatus | read-write | current | The row status for this table entry. |
| 1.3.6.1.4.1.248.52.1.11.3 | NodehmSec2FirewallL3PacketFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.3.1 | NodehmSec2FirewallL3PfIncomingGroup | |||
| 1.3.6.1.4.1.248.52.1.11.3.1.1 | TablehmSec2FwL3PfInTable | not-accessible | current | A list of the IP rules for incoming traffic. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1 | RowhmSec2FwL3PfInEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.1 | ColumnhmSec2FwL3PfInIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.2 | ColumnhmSec2FwL3PfInSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.3 | ColumnhmSec2FwL3PfInSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.4 | ColumnhmSec2FwL3PfInDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.5 | ColumnhmSec2FwL3PfInDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.6 | ColumnhmSec2FwL3PfInProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.7 | ColumnhmSec2FwL3PfInAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.8 | ColumnhmSec2FwL3PfInLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.9 | ColumnhmSec2FwL3PfInDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.10 | ColumnhmSec2FwL3PfInErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.3.1.1.1.11 | ColumnhmSec2FwL3PfInRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.3.1.2 | ScalarhmSec2FwL3PfInLogNonMatching | read-write | current | Log incoming packets not matching any rule. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3 | TablehmSec2FwL3PfDIInTable | not-accessible | current | A list of the IP rules for incoming traffic controlled by the digital input to activate or deactivate the rules. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1 | RowhmSec2FwL3PfDIInEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.1 | ColumnhmSec2FwL3PfDIInIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.2 | ColumnhmSec2FwL3PfDIInSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.3 | ColumnhmSec2FwL3PfDIInSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.4 | ColumnhmSec2FwL3PfDIInDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.5 | ColumnhmSec2FwL3PfDIInDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.6 | ColumnhmSec2FwL3PfDIInProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.7 | ColumnhmSec2FwL3PfDIInAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.8 | ColumnhmSec2FwL3PfDIInLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.9 | ColumnhmSec2FwL3PfDIInDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.10 | ColumnhmSec2FwL3PfDIInErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.3.1.3.1.11 | ColumnhmSec2FwL3PfDIInRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.3.1.4 | ScalarhmSec2FwL3PfDIInLevel | read-write | current | Set this variable to change the behavior of the digital input to activate the Firewall rules in the Digital Input Rule table when the digital input value is hi… |
| 1.3.6.1.4.1.248.52.1.11.3.1.5 | ScalarhmSec2FwL3PfDIInStateRemoval | read-write | current | Set to remove or keep the Firewall state entries for Digital Input Firewall rules when the state switches. |
| 1.3.6.1.4.1.248.52.1.11.3.1.6 | ScalarhmSec2FwL3PfDIInOperStatus | read-only | current | This value shows if the rules for digital input are currently active or inactive (depends on the activation level hmSec2FwL3PfDIInLevel). |
| 1.3.6.1.4.1.248.52.1.11.3.2 | NodehmSec2FirewallL3PfOutgoingGroup | |||
| 1.3.6.1.4.1.248.52.1.11.3.2.1 | TablehmSec2FwL3PfOutTable | not-accessible | current | A list of the IP rules for outgoing traffic. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1 | RowhmSec2FwL3PfOutEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.1 | ColumnhmSec2FwL3PfOutIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.2 | ColumnhmSec2FwL3PfOutSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.3 | ColumnhmSec2FwL3PfOutSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.4 | ColumnhmSec2FwL3PfOutDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.5 | ColumnhmSec2FwL3PfOutDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.6 | ColumnhmSec2FwL3PfOutProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.7 | ColumnhmSec2FwL3PfOutAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.8 | ColumnhmSec2FwL3PfOutLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.9 | ColumnhmSec2FwL3PfOutDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.10 | ColumnhmSec2FwL3PfOutErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.3.2.1.1.11 | ColumnhmSec2FwL3PfOutRowStatus | read-write | current | The row status for this table entry. |
| 1.3.6.1.4.1.248.52.1.11.3.2.2 | ScalarhmSec2FwL3PfOutLogNonMatching | read-write | current | Log incoming packets not matching any rule. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3 | TablehmSec2FwL3PfDIOutTable | not-accessible | current | A list of the IP rules for outgoing traffic controlled by the digital input to activate or deactivate the rules. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1 | RowhmSec2FwL3PfDIOutEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.1 | ColumnhmSec2FwL3PfDIOutIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.2 | ColumnhmSec2FwL3PfDIOutSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.3 | ColumnhmSec2FwL3PfDIOutSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.4 | ColumnhmSec2FwL3PfDIOutDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.5 | ColumnhmSec2FwL3PfDIOutDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.6 | ColumnhmSec2FwL3PfDIOutProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.7 | ColumnhmSec2FwL3PfDIOutAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.8 | ColumnhmSec2FwL3PfDIOutLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.9 | ColumnhmSec2FwL3PfDIOutDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.10 | ColumnhmSec2FwL3PfDIOutErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.3.2.3.1.11 | ColumnhmSec2FwL3PfDIOutRowStatus | read-write | current | The row status for this table entry. |
| 1.3.6.1.4.1.248.52.1.11.3.2.4 | ScalarhmSec2FwL3PfDIOutLevel | read-write | current | Set this variable to change the behavior of the digital input to activate the Firewall rules in the Digital Input Rule table when the digital input value is hi… |
| 1.3.6.1.4.1.248.52.1.11.3.2.5 | ScalarhmSec2FwL3PfDIOutStateRemoval | read-write | current | Set to remove or keep the Firewall state entries for Digital Input Firewall rules when the state switches. |
| 1.3.6.1.4.1.248.52.1.11.3.2.6 | ScalarhmSec2FwL3PfDIOutOperStatus | read-only | current | This value shows if the rules for digital input are currently active or inactive (depends on the activation level hmSec2FwL3PfDIOutLevel). |
| 1.3.6.1.4.1.248.52.1.11.3.3 | NodehmSec2FirewallL3TemplateGroup | |||
| 1.3.6.1.4.1.248.52.1.11.3.3.1 | TablehmSec2FwL3TplIdTable | not-accessible | current | A list of IP templates. |
| 1.3.6.1.4.1.248.52.1.11.3.3.1.1 | RowhmSec2FwL3TplIdEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.3.1.1.1 | ColumnhmSec2FwL3TplIdIndex | read-only | current | Table index. |
| 1.3.6.1.4.1.248.52.1.11.3.3.1.1.2 | ColumnhmSec2FwL3TplIdName | read-write | current | The (unique) name of the template. |
| 1.3.6.1.4.1.248.52.1.11.3.3.1.1.3 | ColumnhmSec2FwL3TplIdRowStatus | read-write | current | The row status of this table entry. This object can be set to createAndGo(4) or destroy(6). |
| 1.3.6.1.4.1.248.52.1.11.3.3.2 | TablehmSec2FwL3TplNetTable | not-accessible | current | Holds the addresses/networks of the templates. |
| 1.3.6.1.4.1.248.52.1.11.3.3.2.1 | RowhmSec2FwL3TplNetEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.3.3.2.1.1 | ColumnhmSec2FwL3TplNetIdIndex | read-only | current | The corresponding index in the hmSec2FwL3TplIdTable. |
| 1.3.6.1.4.1.248.52.1.11.3.3.2.1.2 | ColumnhmSec2FwL3TplNetIndex | read-only | current | The index of the net entry within a template. |
| 1.3.6.1.4.1.248.52.1.11.3.3.2.1.3 | ColumnhmSec2FwL3TplNetAddr | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.3.3.2.1.4 | ColumnhmSec2FwL3TplNetRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.4 | NodehmSec2FirewallPppFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.4.1 | NodehmSec2FirewallPppIncomingGroup | |||
| 1.3.6.1.4.1.248.52.1.11.4.1.1 | TablehmSec2FwPppInTable | not-accessible | current | A list of the IP rules for incoming traffic from the PPP interface. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1 | RowhmSec2FwPppInEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.1 | ColumnhmSec2FwPppInIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.2 | ColumnhmSec2FwPppInSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.3 | ColumnhmSec2FwPppInSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.4 | ColumnhmSec2FwPppInDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.5 | ColumnhmSec2FwPppInDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.6 | ColumnhmSec2FwPppInProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.7 | ColumnhmSec2FwPppInAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.8 | ColumnhmSec2FwPppInLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.9 | ColumnhmSec2FwPppInDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.10 | ColumnhmSec2FwPppInErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.4.1.1.1.11 | ColumnhmSec2FwPppInRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.4.1.2 | ScalarhmSec2FwPppInLogNonMatching | read-write | current | Log incoming packets not matching any rule. |
| 1.3.6.1.4.1.248.52.1.11.5 | NodehmSec2FirewallSnmpFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.5.1 | TablehmSec2FwSnmpTable | not-accessible | current | A list of firewall rules for SNMP traffic. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1 | RowhmSec2FwSnmpEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.1 | ColumnhmSec2FwSnmpIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.2 | ColumnhmSec2FwSnmpInterface | read-write | current | Interface for which this firewall rule applies |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.3 | ColumnhmSec2FwSnmpSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.4 | ColumnhmSec2FwSnmpAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.5 | ColumnhmSec2FwSnmpLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.6 | ColumnhmSec2FwSnmpDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.7 | ColumnhmSec2FwSnmpErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.5.1.1.8 | ColumnhmSec2FwSnmpRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.6 | NodehmSec2FirewallSshFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.6.1 | TablehmSec2FwSshTable | not-accessible | current | A list of firewall rules for SSH traffic. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1 | RowhmSec2FwSshEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.1 | ColumnhmSec2FwSshIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.2 | ColumnhmSec2FwSshInterface | read-write | current | Interface for which this firewall rule applies |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.3 | ColumnhmSec2FwSshSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.4 | ColumnhmSec2FwSshAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.5 | ColumnhmSec2FwSshLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.6 | ColumnhmSec2FwSshDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.7 | ColumnhmSec2FwSshErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.6.1.1.8 | ColumnhmSec2FwSshRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.7 | NodehmSec2FirewallHttpsFilterGroup | |||
| 1.3.6.1.4.1.248.52.1.11.7.1 | TablehmSec2FwHttpsTable | not-accessible | current | A list of firewall rules for HTTPS traffic. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1 | RowhmSec2FwHttpsEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.1 | ColumnhmSec2FwHttpsIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.2 | ColumnhmSec2FwHttpsInterface | read-write | current | Interface for which this firewall rule applies |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.3 | ColumnhmSec2FwHttpsSrcNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.4 | ColumnhmSec2FwHttpsAction | read-write | current | Action to be performed if the firewall rule matches. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.5 | ColumnhmSec2FwHttpsLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.6 | ColumnhmSec2FwHttpsDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.7 | ColumnhmSec2FwHttpsErrorText | read-only | current | Error text. |
| 1.3.6.1.4.1.248.52.1.11.7.1.1.8 | ColumnhmSec2FwHttpsRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.11.8 | NodehmSec2UsrFwConfigGroup | |||
| 1.3.6.1.4.1.248.52.1.11.8.1 | ScalarhmSec2UsrFwStatus | read-write | current | Enables/Disables the User Firewall. |
| 1.3.6.1.4.1.248.52.1.11.8.2 | TablehmSec2UsrFwTemplateTable | not-accessible | current | A list of the User Firewall templates. |
| 1.3.6.1.4.1.248.52.1.11.8.2.1 | RowhmSec2UsrFwTemplateEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.1 | ColumnhmSec2UsrFwTemplateIndex | read-only | current | Table index. |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.2 | ColumnhmSec2UsrFwTemplateName | read-write | current | The descriptive name of the template. |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.3 | ColumnhmSec2UsrFwTemplateTimeout | read-write | current | Timeout in seconds after that the User Firewall user will be logged out. |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.4 | ColumnhmSec2UsrFwTemplateTimeoutType | read-write | current | Type of the User Firewall Timeout. static - means the user will be logged out after the time elapsed regardless of the user network activity. dynamic - the cou… |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.5 | ColumnhmSec2UsrFwTemplateComment | read-write | current | A comment for the template. |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.6 | ColumnhmSec2UsrFwTemplateSrcAddr | read-write | current | Source IP address for the user firewall rules. - single address (a.b.c.d) - address range in CIDR notation (a.b.c.d/n) - keyword 'me' - keyword 'any' - placeho… |
| 1.3.6.1.4.1.248.52.1.11.8.2.1.7 | ColumnhmSec2UsrFwTemplateStatus | read-write | current | Template Status. active(1) - This template is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - Accep… |
| 1.3.6.1.4.1.248.52.1.11.8.3 | TablehmSec2UsrFwTemplateUserTable | not-accessible | current | Users for the template. |
| 1.3.6.1.4.1.248.52.1.11.8.3.1 | RowhmSec2UsrFwTemplateUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.8.3.1.1 | ColumnhmSec2UsrFwTemplateUserTemplateIndex | read-only | current | Template index from the hmSec2UsrFwTemplateTable above. |
| 1.3.6.1.4.1.248.52.1.11.8.3.1.2 | ColumnhmSec2UsrFwTemplateUserName | read-only | current | User name. |
| 1.3.6.1.4.1.248.52.1.11.8.3.1.3 | ColumnhmSec2UsrFwTemplateUserStatus | read-write | current | Template-User Entry Status. active(1) - This entry is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4)… |
| 1.3.6.1.4.1.248.52.1.11.8.4 | TablehmSec2UsrFwTemplateRuleTable | not-accessible | current | Firewall rules for a template. |
| 1.3.6.1.4.1.248.52.1.11.8.4.1 | RowhmSec2UsrFwTemplateRuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.1 | ColumnhmSec2UsrFwTemplateRuleTemplateIndex | read-only | current | Index of the hmSec2UsrFwTemplateTable above |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.2 | ColumnhmSec2UsrFwTemplateRuleIndex | read-only | current | The table index. |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.3 | ColumnhmSec2UsrFwTemplateRuleProto | read-write | current | The IP protocol (RFC 791) as a decimal number (in range 1 - 255), a name or the keyword 'any' for protocol-independent filtering. The following protocol names … |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.4 | ColumnhmSec2UsrFwTemplateRuleSrcPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.5 | ColumnhmSec2UsrFwTemplateRuleDstNet | read-write | current | Single address (a.b.c.d) or address range in CIDR notation (a.b.c.d/n) or the keywords 'me' or 'any'. |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.6 | ColumnhmSec2UsrFwTemplateRuleDstPort | read-write | current | Port expression or the keyword 'any'. A port expressions is structured as 'port' (default), 'op port' or 'port1 op port2', where 'op' is a mathematical operato… |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.7 | ColumnhmSec2UsrFwTemplateRuleComment | read-write | current | A comment for the firewall rule. |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.8 | ColumnhmSec2UsrFwTemplateRuleLog | read-write | current | Enables or disables logging for packets matching this rule. |
| 1.3.6.1.4.1.248.52.1.11.8.4.1.9 | ColumnhmSec2UsrFwTemplateRuleStatus | read-write | current | Firewall rule status. active(1) - This rule is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - Acce… |
| 1.3.6.1.4.1.248.52.1.11.9 | NodehmSec2FirewallDiagnosticsGroup | |||
| 1.3.6.1.4.1.248.52.1.11.9.1 | TablehmSec2FwDiagL3Table | not-accessible | current | Complete list of IP firewall rules. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1 | RowhmSec2FwDiagL3Entry | not-accessible | current | Firewall rule |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.1 | ColumnhmSec2FwDiagL3Index | read-only | current | Rule number in IP firewall table |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.2 | ColumnhmSec2FwDiagL3Group | read-only | current | Name of group this rule belongs to. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.3 | ColumnhmSec2FwDiagL3Ref | read-only | current | Reference into group (typically the rule number). If this value is -1, then no reference exist. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.4 | ColumnhmSec2FwDiagL3Interface | read-only | current | Interface (or type of traffic). |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.5 | ColumnhmSec2FwDiagL3SrcNet | read-only | current | Source address. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.6 | ColumnhmSec2FwDiagL3SrcPort | read-only | current | Source port (expression). |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.7 | ColumnhmSec2FwDiagL3DstNet | read-only | current | Destination address. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.8 | ColumnhmSec2FwDiagL3DstPort | read-only | current | Destination port (expression) |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.9 | ColumnhmSec2FwDiagL3Proto | read-only | current | IP protocol |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.10 | ColumnhmSec2FwDiagL3Action | read-only | current | Action. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.11 | ColumnhmSec2FwDiagL3Log | read-only | current | Logging. |
| 1.3.6.1.4.1.248.52.1.11.9.1.1.12 | ColumnhmSec2FwDiagL3MatchCnt | read-only | current | Counts the matches on this rule. |
| 1.3.6.1.4.1.248.52.1.11.9.2 | TablehmSec2FwDiagL2Table | not-accessible | current | Complete list of MAC firewall rules. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1 | RowhmSec2FwDiagL2Entry | not-accessible | current | Firewall rule |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.1 | ColumnhmSec2FwDiagL2Index | read-only | current | Rule number in MAC firewall table |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.2 | ColumnhmSec2FwDiagL2Group | read-only | current | Name of group this rule belongs to. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.3 | ColumnhmSec2FwDiagL2Ref | read-only | current | Reference into group (typically the rule number). If this value is -1, then no reference exist. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.4 | ColumnhmSec2FwDiagL2Interface | read-only | current | Interface (or type of traffic). |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.5 | ColumnhmSec2FwDiagL2SrcNet | read-only | current | Source address. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.6 | ColumnhmSec2FwDiagL2DstNet | read-only | current | Destination address. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.7 | ColumnhmSec2FwDiagL2Proto | read-only | current | Layer 2 (Ethernet) protocol |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.8 | ColumnhmSec2FwDiagL2Action | read-only | current | Action. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.9 | ColumnhmSec2FwDiagL2Log | read-only | current | Logging. |
| 1.3.6.1.4.1.248.52.1.11.9.2.1.10 | ColumnhmSec2FwDiagL2MatchCnt | read-only | current | Counts the matches on this rule. |
| 1.3.6.1.4.1.248.52.1.11.10 | NodehmSec2FirewallLearningModeGroup | |||
| 1.3.6.1.4.1.248.52.1.11.10.1 | NodehmSec2FirewallLearningModeVars | |||
| 1.3.6.1.4.1.248.52.1.11.10.1.1 | ScalarhmSec2FLMAdminState | read-write | current | Enable or disable the Firewall Learning Mode |
| 1.3.6.1.4.1.248.52.1.11.10.1.2 | ScalarhmSec2FLMAction | read-write | current | Actions to control the Firewall Learning Mode |
| 1.3.6.1.4.1.248.52.1.11.10.1.3 | ScalarhmSec2FLMInterfaces | read-write | current | Defines the Interface to learn from |
| 1.3.6.1.4.1.248.52.1.11.10.1.4 | ScalarhmSec2FLMType | read-write | current | Learning or testing Mode |
| 1.3.6.1.4.1.248.52.1.11.10.1.5 | ScalarhmSec2FLMAppState | read-only | current | State of running FLM Application |
| 1.3.6.1.4.1.248.52.1.11.10.1.6 | ScalarhmSec2FLMAppInfoEnum | read-only | current | Enum for Infostring |
| 1.3.6.1.4.1.248.52.1.11.10.1.7 | ScalarhmSec2FLMAppInfoString | read-only | current | Special Statusmessage |
| 1.3.6.1.4.1.248.52.1.11.10.1.8 | ScalarhmSec2FLML3Entries | read-only | current | Number of Layer 3 entries in the connection table |
| 1.3.6.1.4.1.248.52.1.11.10.1.9 | ScalarhmSec2FLMFreeMem | read-only | current | Free Mem For Learning Data |
| 1.3.6.1.4.1.248.52.1.11.10.1.10 | ScalarhmSec2FLMAnyRuleChange | read-write | current | How to handle detected accept-any rules during Learning Mode. This can only be set during state: Data not present |
| 1.3.6.1.4.1.248.52.1.11.11 | NodehmSec2FwConfigGroup | |||
| 1.3.6.1.4.1.248.52.1.11.11.1 | ScalarhmSec2FwStaticPacketCheck | read-write | current | Enable or disable static packet check in the firewall (disable for performance reasons). |
| 1.3.6.1.4.1.248.52.1.11.11.2 | ScalarhmSec2FwInternRemNumIPRules | read-only | current | Remaining number of internally available IP firewall rules. |
| 1.3.6.1.4.1.248.52.1.12 | NodehmSec2Network | |||
| 1.3.6.1.4.1.248.52.1.12.1 | NodehmSec2NetGeneralGroup | |||
| 1.3.6.1.4.1.248.52.1.12.1.1 | ScalarhmSec2NetworkMode | read-write | current | Network mode: Transparent Mode or Routing Mode (PPPoE is also Routing Mode) |
| 1.3.6.1.4.1.248.52.1.12.1.2 | ScalarhmSec2NetAction | read-write | current | This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack and network con… |
| 1.3.6.1.4.1.248.52.1.12.1.3 | ScalarhmSec2NetDirectedBroadcasts | read-write | current | Enable or disable forwarding of net directed broadcasts by the device. Remark: net directed broadcast can be used for so called Smurf attacks. Per default this… |
| 1.3.6.1.4.1.248.52.1.12.1.4 | ScalarhmSec2NetIPFragmentsAllowed | read-write | current | Enable or disable forwarding of IP fragments by the device. Per default this feature is enabled. |
| 1.3.6.1.4.1.248.52.1.12.1.5 | ScalarhmSec2NetICMPSendRedirects | read-write | current | Enable or disable sending of ICMP redirects by the device, when the incoming subnet and interface and the outgoing subnet and interface is the same for the for… |
| 1.3.6.1.4.1.248.52.1.12.1.6 | ScalarhmSec2NetEtherBroadcastRoute | read-write | current | Internal use only. |
| 1.3.6.1.4.1.248.52.1.12.2 | NodehmSec2NetTransparentGroup | |||
| 1.3.6.1.4.1.248.52.1.12.2.1 | ScalarhmSec2LocalIPAddr | read-write | current | IP address of the management agent in transparent mode. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.52.1.12.2.2 | ScalarhmSec2LocalPhysAddr | read-only | current | Physical MAC-address of the agent. |
| 1.3.6.1.4.1.248.52.1.12.2.3 | ScalarhmSec2GatewayIPAddr | read-write | current | IP address of the default gateway. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.52.1.12.2.4 | ScalarhmSec2NetMask | read-write | current | Subnet mask. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.52.1.12.2.5 | ScalarhmSec2UseVLAN | read-write | current | Use VLAN Tag and Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.2.6 | ScalarhmSec2MgmtVLANID | read-write | current | Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.2.7 | ScalarhmSec2NetProto | read-write | current | Network Protocol to obtain IP configuration. (1) none means use fix configuration, (2) DHCP means using DHCP in transparent mode to obtain a IP address from se… |
| 1.3.6.1.4.1.248.52.1.12.2.8 | ScalarhmSec2NetPassThroughSTP | read-write | current | Passthorugh Spanning Tree Protocol BPDU frames in Transparent Mode. |
| 1.3.6.1.4.1.248.52.1.12.2.9 | ScalarhmSec2NetPassThroughGMRP | read-write | current | Passthorugh GMRP (GARP Multicast registration protocol) frames in Transparent Mode. |
| 1.3.6.1.4.1.248.52.1.12.2.10 | ScalarhmSec2NetPassThroughDHCP | read-write | current | Passthorugh DHCP (no DHCP server on the EAGLE) frames in Transparent Mode. |
| 1.3.6.1.4.1.248.52.1.12.3 | NodehmSec2NetRouterGroup | |||
| 1.3.6.1.4.1.248.52.1.12.3.1 | TablehmSec2NetIPInterfaceTable | not-accessible | current | This table contains the IP Configuration table for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1 | RowhmSec2NetIPInterfaceEntry | not-accessible | current | This table contains the IP Configuration table for the internal interface. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.1 | ColumnhmSec2NetIPIfIndex | read-only | current | Index of IP interface in the table. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.2 | ColumnhmSec2NetIPIfAddr | read-write | current | Internal IP address. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.3 | ColumnhmSec2NetIPIfMask | read-write | current | Subnet mask. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.4 | ColumnhmSec2NetIPIfUseVLAN | read-write | current | Use VLAN Tag and Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.5 | ColumnhmSec2NetIPIfVLANID | read-write | current | Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.3.1.1.6 | ColumnhmSec2NetIPIfNetProto | read-write | current | Network Protocol to obtain IP configuration. (1) none means use fix configuration, (2) DHCP means using DHCP on this interface to obtain a IP address from serv… |
| 1.3.6.1.4.1.248.52.1.12.3.2 | TablehmSec2NetIPAliasesTable | not-accessible | current | This table contains additional IP Configuration for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1 | RowhmSec2NetIPAliasesEntry | not-accessible | current | This table contains additional IP Configuration for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.1 | ColumnhmSec2NetIPAliasIfIndex | read-only | current | Index of IP interface in the table. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.2 | ColumnhmSec2NetIPAliasAddr | read-write | current | Internal IP address. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.3 | ColumnhmSec2NetIPAliasMask | read-write | current | Subnet mask. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.4 | ColumnhmSec2NetIPAliasUseVLAN | read-write | current | Use VLAN Tag and Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.5 | ColumnhmSec2NetIPAliasVLANID | read-write | current | Management VLAN ID. |
| 1.3.6.1.4.1.248.52.1.12.3.2.1.6 | ColumnhmSec2NetIPAliasRowStatus | read-write | current | The row status for the table entry The configuration is been taken, when the row status is set to active. |
| 1.3.6.1.4.1.248.52.1.12.3.3 | NodehmSec2NetRouterExternalGroup | |||
| 1.3.6.1.4.1.248.52.1.12.3.3.1 | ScalarhmSec2NetRtrExternalGateway | read-write | current | IP address of the default gateway for the external interface. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.52.1.12.3.3.2 | ScalarhmSec2NetRtrExtTrapAddr | read-write | current | Use the external router IP address as agent address for sending SNMP v1 traps. |
| 1.3.6.1.4.1.248.52.1.12.3.4 | TablehmSec2NetIPRouteTable | not-accessible | current | This table contains additional Routing Configuration for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1 | RowhmSec2NetIPRouteEntry | not-accessible | current | This table contains additional IP Configuration for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1.1 | ColumnhmSec2NetIPRouteIfIndex | read-only | current | Index of IP interface in the table. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1.2 | ColumnhmSec2NetIPRouteAddr | read-write | current | Network IP address. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1.3 | ColumnhmSec2NetIPRouteMask | read-write | current | Network subnet mask. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1.4 | ColumnhmSec2NetIPRouteGateway | read-write | current | Gateway to be used for this network. |
| 1.3.6.1.4.1.248.52.1.12.3.4.1.5 | ColumnhmSec2NetIPRouteRowStatus | read-write | current | The row status for the table entry. The configuration is been taken, when the row status is set to active. |
| 1.3.6.1.4.1.248.52.1.12.4 | NodehmSec2NetPPPoEGroup | |||
| 1.3.6.1.4.1.248.52.1.12.4.1 | ScalarhmSec2PPPoEUsername | read-write | current | PPPoE login configuration user name |
| 1.3.6.1.4.1.248.52.1.12.4.2 | ScalarhmSec2PPPoEPassword | read-write | current | PPPoE login configuration password |
| 1.3.6.1.4.1.248.52.1.12.4.3 | ScalarhmSec2PPPoEMTU | read-write | current | PPPoE Interface MTU preconfigured value. |
| 1.3.6.1.4.1.248.52.1.12.4.4 | ScalarhmSec2PPPoEIfAddr | read-only | current | Provider assigned IP address on PPPoE interface. |
| 1.3.6.1.4.1.248.52.1.12.4.5 | ScalarhmSec2PPPoEIfMask | read-only | current | Provider assigned subnet mask. |
| 1.3.6.1.4.1.248.52.1.12.4.6 | ScalarhmSec2PPPoEGateway | read-only | current | Provider assigned gateway address. |
| 1.3.6.1.4.1.248.52.1.12.4.7 | ScalarhmSec2PPPoEStatus | read-only | current | Current state of PPPoE interface. |
| 1.3.6.1.4.1.248.52.1.12.4.8 | ScalarhmSec2PPPoEDisconAdminState | read-write | current | PPPoE automatic disconnect admin state. When enabled an automatic disconnect will be performed every day at the specified hour (if PPPoE connection is up only). |
| 1.3.6.1.4.1.248.52.1.12.4.9 | ScalarhmSec2PPPoEDisconHour | read-write | current | PPPoE automatic disconnect hour setting. |
| 1.3.6.1.4.1.248.52.1.12.5 | NodehmSec2NetPPPGroup | |||
| 1.3.6.1.4.1.248.52.1.12.5.1 | ScalarhmSec2PPPUsername | read-write | current | PPP login configuration user name |
| 1.3.6.1.4.1.248.52.1.12.5.2 | ScalarhmSec2PPPPassword | read-write | current | PPP login configuration password |
| 1.3.6.1.4.1.248.52.1.12.5.3 | ScalarhmSec2PPPLocalIPAddress | read-write | current | Local IP address for PPP configuration. |
| 1.3.6.1.4.1.248.52.1.12.5.4 | ScalarhmSec2PPPRemoteIPAddress | read-write | current | Remote IP address for PPP configuration. |
| 1.3.6.1.4.1.248.52.1.12.5.5 | ScalarhmSec2PPPModemAdminState | read-write | current | Allow Modem on serial interface or not. The configuration will be taken, when hmSec2NetAction variable is set to activate. |
| 1.3.6.1.4.1.248.52.1.12.5.6 | ScalarhmSec2PPPModemBaudRate | read-write | current | Modem speed on serial connection to be used. |
| 1.3.6.1.4.1.248.52.1.12.5.7 | ScalarhmSec2PPPMTU | read-write | current | PPP Interface MTU preconfigured value. |
| 1.3.6.1.4.1.248.52.1.12.5.8 | ScalarhmSec2PPPStatus | read-only | current | Current state of PPP interface. |
| 1.3.6.1.4.1.248.52.1.12.5.9 | ScalarhmSec2PPPModemFlowControl | read-write | current | Modem flow control on serial connection to be used. Off disable all flow control options. RTS/CTS means hardware flow control. |
| 1.3.6.1.4.1.248.52.1.12.6 | NodehmSec2NetDNSClientGroup | |||
| 1.3.6.1.4.1.248.52.1.12.6.1 | ScalarhmSec2DNSClientServer1 | read-write | current | The first DNS Server to use. |
| 1.3.6.1.4.1.248.52.1.12.6.2 | ScalarhmSec2DNSClientServer2 | read-write | current | The second DNS Server to use. |
| 1.3.6.1.4.1.248.52.1.12.6.3 | ScalarhmSec2DNSClientServer3 | read-write | current | The third DNS Server to use. |
| 1.3.6.1.4.1.248.52.1.12.6.4 | ScalarhmSec2DNSClientServer4 | read-write | current | The fourth DNS Server to use. |
| 1.3.6.1.4.1.248.52.1.12.6.5 | ScalarhmSec2DNSClientConfigSource | read-write | current | DNS Client configuration source. If the value is set to user(1), then the variables hmSec2DNSClientServer1 to hmSec2DNSClientServer4 will be used. If the value… |
| 1.3.6.1.4.1.248.52.1.12.7 | NodehmSec2NetDynDNSGroup | |||
| 1.3.6.1.4.1.248.52.1.12.7.1 | ScalarhmSec2DynDNSProvider | read-write | current | Type of DynDNS provider to be used. |
| 1.3.6.1.4.1.248.52.1.12.7.2 | ScalarhmSec2DynDNSRegister | read-write | current | Enables or disables the DynDNS service. When enabled the host is registered at the DynDNS server. |
| 1.3.6.1.4.1.248.52.1.12.7.3 | ScalarhmSec2DynDNSServer | read-write | current | The DynDNS server which provides the service to register the IP address of this host. |
| 1.3.6.1.4.1.248.52.1.12.7.4 | ScalarhmSec2DynDNSLogin | read-write | current | The DynDNS server login name for the registration to the DynDNS service. |
| 1.3.6.1.4.1.248.52.1.12.7.5 | ScalarhmSec2DynDNSPassword | read-write | current | The DynDNS server password for the registration to the DynDNS service. |
| 1.3.6.1.4.1.248.52.1.12.7.6 | ScalarhmSec2DynDNSHostname | read-write | current | The DynDNS host name to be registered with the IP address to the DynDNS service. |
| 1.3.6.1.4.1.248.52.1.12.7.7 | ScalarhmSec2DynDNSRefresh | read-write | current | Refresh interval for checking the IP address. The refresh interval is counted in minutes. |
| 1.3.6.1.4.1.248.52.1.12.7.8 | ScalarhmSec2DynDNSStatus | read-only | current | The DynDNS registration status. |
| 1.3.6.1.4.1.248.52.1.12.7.9 | ScalarhmSec2DynDNSCheckIPServer | read-write | current | The CheckIP server which provides the service to detect the IP address of this host seen from the outside. |
| 1.3.6.1.4.1.248.52.1.12.8 | NodehmSec2NetPingGroup | |||
| 1.3.6.1.4.1.248.52.1.12.8.1 | ScalarhmSec2NetPingSourceAddr | read-write | current | Source IP address for ping command. 0.0.0.0 means no source address given. |
| 1.3.6.1.4.1.248.52.1.12.8.2 | ScalarhmSec2NetPingDestAddr | read-write | current | Destination IP address for ping command. |
| 1.3.6.1.4.1.248.52.1.12.8.3 | ScalarhmSec2NetPingAction | read-write | current | If set to activate(2), the ping will be started. When read, this variable returns always other(1). |
| 1.3.6.1.4.1.248.52.1.12.8.4 | ScalarhmSec2NetPingActionStatus | read-only | current | Returns, if a ping command is running at the monent (pinging) or if the ping functionality is not running (idle). |
| 1.3.6.1.4.1.248.52.1.12.8.5 | ScalarhmSec2NetPingResult | read-only | current | Returns the result of the last ping operation. If the ping has been successful (host is reachable through ping) or ping has failed (host is not reachable throu… |
| 1.3.6.1.4.1.248.52.1.12.8.6 | ScalarhmSec2NetPingResultText | read-only | current | Returns the result of the last ping operation as text. |
| 1.3.6.1.4.1.248.52.1.13 | NodehmSec2Vpn | |||
| 1.3.6.1.4.1.248.52.1.13.1 | NodehmSec2VpnGroup | |||
| 1.3.6.1.4.1.248.52.1.13.1.1 | NodehmSec2VpnGeneralGroup | |||
| 1.3.6.1.4.1.248.52.1.13.1.1.1 | ScalarhmSec2VpnRemoteCtlPwd | read-write | current | VPN Remote Control Password. This object will always return '********' even if a password is set. Setting this object to a 'zero' string deactivates the remote… |
| 1.3.6.1.4.1.248.52.1.13.1.1.2 | ScalarhmSec2VpnLEDIndication | read-write | current | LED indication for VPN connection active. If at least one VPN connection is active und up, the EAGLE will signalize this with its STATUS LED blinking yellow an… |
| 1.3.6.1.4.1.248.52.1.13.1.1.3 | ScalarhmSec2VpnModeConfigPool | read-write | current | |
| 1.3.6.1.4.1.248.52.1.13.1.1.4 | ScalarhmSec2VpnInputServiceMode | read-write | current | Select the source which shall be used to activate VPN service mode connections. Redundant power supply (power off -> service mode active), low level on digital… |
| 1.3.6.1.4.1.248.52.1.13.1.2 | NodehmSec2VpnConnGroup | |||
| 1.3.6.1.4.1.248.52.1.13.1.2.1 | ScalarhmSec2VpnConnMax | read-only | current | Maximum number of VPN connections supported. Notice that the maximum number of active and up VPN connections is limited to 64. |
| 1.3.6.1.4.1.248.52.1.13.1.2.2 | ScalarhmSec2VpnConnNext | read-only | current | This object always holds an appropriate value to be used for hmSec2VpnConnIndex when creating entries in the hmSec2VpnConnTable. The value 0 indicates that no … |
| 1.3.6.1.4.1.248.52.1.13.1.2.3 | TablehmSec2VpnConnTable | not-accessible | current | A list of VPN connections. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1 | RowhmSec2VpnConnEntry | not-accessible | current | A VPN connection entry. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.1 | ColumnhmSec2VpnConnIndex | read-only | current | An index that uniquely identifies the entry in the table. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.2 | ColumnhmSec2VpnConnIkeVersion | read-write | current | Version of the IKE protocol: o auto: accept IKEv1/v2 as responder, start with IKEv1 as initiator o v1: used protocol is IKE version 1 (ISAKMP) o v2: used proto… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.3 | ColumnhmSec2VpnConnIkeStartup | read-write | current | If this host acts as a responder it does not initiate a key exchange (IKE) nor connection parameters negotiation. Otherwise, this host acts as an initiator - t… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.4 | ColumnhmSec2VpnConnIkeCompat | read-write | current | Compatibility mode for older IPsec clients. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.5 | ColumnhmSec2VpnConnIkeLifetime | read-write | current | Lifetime of IKE security association in seconds. The maximum value is 24 hours (86400 seconds). |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.6 | ColumnhmSec2VpnConnIkeDpdTimeout | read-write | current | If greater than zero, the local peer sends Dead Peer Detection (DPD) messages (according to RFC 3706) to the remote peer. This value specifies the timeout in s… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.7 | ColumnhmSec2VpnConnIkeLocalAddr | read-write | current | Hostname (FQDN) or IP address of local security gateway. If the value is 'any', then the primary IP address of external interface is used. In the case that thi… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.8 | ColumnhmSec2VpnConnIkeRemoteAddr | read-write | current | Typically the hostname (FQDN) or IP address of remote security gateway. If this value is 'any', then any IP address is accepted when establishing an IKE-SA as … |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.9 | ColumnhmSec2VpnConnIkeAuthType | read-write | current | Type of authentication to be used (X.509 RSA certificates or pre-shared key). |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.10 | ColumnhmSec2VpnConnIkeAuthMode | read-write | current | The phase 1 exchange mode to be used. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.11 | ColumnhmSec2VpnConnIkeAuthCertCA | read-write | current | PEM encoded X.509 certificate (RFC 1422), if authentication type in 'hmSec2VpnConnIkeAuthType' is 'x509rsa'. This certificate is used for RSA based signature v… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.12 | ColumnhmSec2VpnConnIkeAuthCertRemote | read-write | current | PEM encoded X.509 certificate (RFC 1422), if authentication type in 'hmSec2VpnConnIkeAuthType' is 'x509rsa'. This certificate is used for RSA based authenticat… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.13 | ColumnhmSec2VpnConnIkeAuthCertLocal | read-write | current | PEM encoded X.509 certificate (RFC 1422) to be used, if authentication type in 'hmSec2VpnConnIkeAuthType' is 'x509rsa'. This certificate is used for RSA based … |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.14 | ColumnhmSec2VpnConnIkeAuthPrivKey | read-write | current | PEM encoded RSA private key (PKCS 1) to be used, if authentication type in 'hmSec2VpnConnIkeAuthType' is 'x509rsa'. Notice that this object is write-only and e… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.15 | ColumnhmSec2VpnConnIkeAuthPasswd | read-write | current | Passphrase to be used for decryption of private key from 'hmSec2VpnConnIkeAuthPrivKey'. The passphrase must be set before the private key is set, else the SNMP… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.16 | ColumnhmSec2VpnConnIkeAuthPsk | read-write | current | Preshared key (passphrase) to be used if authentication type in 'hmSec2VpnConnIkeAuthType' is 'psk'. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.17 | ColumnhmSec2VpnConnIkeAuthLocId | read-write | current | Local peer identifier to be sent within ID payload during negotiation. The ID payload is used to identify the initiator of the security association. The identi… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.18 | ColumnhmSec2VpnConnIkeAuthLocType | read-write | current | Type of local peer identifier in 'hmSec2VpnConnIkeAuthLocId': o default: If 'hmSec2VpnConnIkeAuthType' is 'psk' then use the IP address from 'hmSec2VpnConnIkeL… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.19 | ColumnhmSec2VpnConnIkeAuthRemId | read-write | current | Remote peer identifier to be compared with ID payload during negotiation. The ID payload is used to identify the initiator of the security association. The ide… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.20 | ColumnhmSec2VpnConnIkeAuthRemType | read-write | current | Type of remote peer identifier in hmSec2VpnConnIkeAuthRemId: o any: received remote identifier is not checked o ipaddr: IPv4 address o keyid: key identifier o … |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.21 | ColumnhmSec2VpnConnIkeAlgDh | read-write | current | Diffie-Hellman key agreement algorithm to be used for establishment of IKE-SA: o any: accept all algorithms as responder, use default as initiator o modp768: R… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.22 | ColumnhmSec2VpnConnIkeAlgHash | read-write | current | Hash algorithm to be used in IKE: o any: accept all algorithms as responder, use all as IKEv2 initiator (not allowed as IKEv1 initiator) o md5: MD5 o sha1: SHA… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.23 | ColumnhmSec2VpnConnIkeAlgMac | read-write | current | Integrity (MAC) algorithm to be used in IKEv2: o any: accept all algorithms as responder, use all as IKEv2 initiator (not allowed as IKEv1 initiator) o hmacmd5… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.24 | ColumnhmSec2VpnConnIkeAlgEncr | read-write | current | Encryption algorithm to be used in IKE: o any: accept all algorithms as responder, use all as IKEv2 initiator (not allowed as IKEv1 initiator) o des: DES o des… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.25 | ColumnhmSec2VpnConnIpsecMode | read-write | current | IPsec encapsulation mode. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.26 | ColumnhmSec2VpnConnIpsecNatTraversal | read-write | current | If 'on', then it forces UDP encapsulation of ESP payloads (NAT traversal). When 'off', then the remote peer is allowed to negotiate normal ESP encapsulation or… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.27 | ColumnhmSec2VpnConnIpsecLifetime | read-write | current | Lifetime of IPsec security association in seconds. The maximum value is 8 hours (28800 seconds). |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.28 | ColumnhmSec2VpnConnIpsecAlgDh | read-write | current | Diffie-Hellman key agreement algorithm to be used for IPsec-SA session key establishment: o any: accept all algorithms as responder, use all as IKEv2 initiator… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.29 | ColumnhmSec2VpnConnIpsecAlgMac | read-write | current | Integrity (MAC) algorithm to be used in IPsec: o any: accept all algorithms as responder, use all as IKEv2 initiator (not allowed as IKEv1 initiator) o hmacmd5… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.30 | ColumnhmSec2VpnConnIpsecAlgEncr | read-write | current | Encryption algorithm to be used for payload encryption in IPsec: o any: accept all algorithms as responder, use all as IKEv2 initiator (not allowed as IKEv1 in… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.31 | ColumnhmSec2VpnConnOperStatus | read-only | current | The current operational status of the VPN connection: o 'up': the IKE-SA and all IPsec SAs are up; o 'down': the IKE-SA and all IPsec SAs are down; o 'negotiat… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.32 | ColumnhmSec2VpnConnDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.33 | ColumnhmSec2VpnConnRowStatus | read-write | current | The row status of this table entry. If the row status is 'active' then it is not allowed to change any value (this applies also to active traffic selectors). T… |
| 1.3.6.1.4.1.248.52.1.13.1.2.3.1.34 | ColumnhmSec2VpnConnServiceMode | read-write | current | The service mode can be enabled for connections which shall be established only, when the device enters service mode (redundant power supply not connected). Th… |
| 1.3.6.1.4.1.248.52.1.13.1.3 | NodehmSec2VpnTrafficSelGroup | |||
| 1.3.6.1.4.1.248.52.1.13.1.3.1 | TablehmSec2VpnTrafficSelTable | not-accessible | current | A list of traffic selectors. For details on the role of traffic selectors in IPsec protocol see RFC 2409, section 5.5 and RFC 4306, section 2.9. |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1 | RowhmSec2VpnTrafficSelEntry | not-accessible | current | A traffic selector entry. A traffic selector defines the subnet/host addresses for which this IPSec connection (SA) is responsible. |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.1 | ColumnhmSec2VpnTrafficSelIndex | read-only | current | An index that (together with the connection index hmSec2VpnConnIndex) identifies the entry in the traffic selector table. This index can be choosen freely, but… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.3 | ColumnhmSec2VpnTrafficSelSrcAddr | read-write | current | Host or subnet address in CIDR notation (a.b.c.d/n) for which this traffic descriptor (and the associated VPN connection) is responsible. This address is compa… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.4 | ColumnhmSec2VpnTrafficSelDstAddr | read-write | current | Host or subnet address in CIDR notation (a.b.c.d/n) for which this traffic descriptor (and the associated VPN connection) is responsible. This address is compa… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.5 | ColumnhmSec2VpnTrafficSelSrcPort | read-write | current | The source port as a decimal number in range 1 - 65535, the keyword 'any' for a port-independent policy (equivalent to port number 0), or one of the following … |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.6 | ColumnhmSec2VpnTrafficSelDstPort | read-write | current | The destination port as a decimal number in range 0 - 65535, the keyword 'any' for a port-independent policy (equivalent to port number 0), or one of the follo… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.7 | ColumnhmSec2VpnTrafficSelProto | read-write | current | The IP protocol (RFC 791) as a decimal number in range 0 - 255 or a hexadecimal number in range 0x00 - 0xff, a protocol name or the keyword 'any' for a protoco… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.8 | ColumnhmSec2VpnTrafficSelPolicy | read-write | current | Policy to apply to the matching traffic. The following policies are currently supported: o 'require': require encryption of the traffic. If the tunnel or traff… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.9 | ColumnhmSec2VpnTrafficSelDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.10 | ColumnhmSec2VpnTrafficSelRowStatus | read-write | current | The row status of this table entry. Only traffic selector entries with an 'active' row status will be considered if the connections row status is set 'active'.… |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.11 | ColumnhmSec2VpnTrafficSelSrcMapping | read-write | current | Optional mapping for the source address in CIDR notation (a.b.c.d/n) for a given traffic descriptor. If set, the IP source address of outgoing packets will be … |
| 1.3.6.1.4.1.248.52.1.13.1.3.1.1.12 | ColumnhmSec2VpnTrafficSelDstMapping | read-write | current | Optional mapping for the destination address in CIDR notation (a.b.c.d/n) for a given traffic descriptor. If set, the IP destination address of outgoing packet… |
| 1.3.6.1.4.1.248.52.1.13.1.4 | NodehmSec2VpnCertificateGroup | |||
| 1.3.6.1.4.1.248.52.1.13.1.4.4 | ScalarhmSec2VpnCertificateValidation | read-write | current | Validation of certificates globally enabled or disabled. This allows to use certificates even the system time is not set. |
| 1.3.6.1.4.1.248.52.1.14 | NodehmSec2Redundancy | |||
| 1.3.6.1.4.1.248.52.1.14.1 | NodehmSec2RedRouterGroup | |||
| 1.3.6.1.4.1.248.52.1.14.1.1 | ScalarhmSec2RedAdminState | read-write | current | Redundancy admin state (switch redundancy globally off or on). The redundancy is a router redundancy using VRRP for synchronising both devices (master and back… |
| 1.3.6.1.4.1.248.52.1.14.1.2 | ScalarhmSec2RedStartupState | read-write | current | Redundancy function of the device used at startup. The device can be master or backup system. |
| 1.3.6.1.4.1.248.52.1.14.1.3 | ScalarhmSec2RedPriority | read-write | current | Redundancy device priority as defined by VRRP. |
| 1.3.6.1.4.1.248.52.1.14.1.4 | ScalarhmSec2RedOperState | read-only | current | Actual redundancy function of the device. The device can be master or backup system, if it is in service. |
| 1.3.6.1.4.1.248.52.1.14.1.5 | ScalarhmSec2RedOperInfo | read-only | current | Additional redundancy function information. |
| 1.3.6.1.4.1.248.52.1.14.1.6 | TablehmSec2RedIfaceTable | not-accessible | current | This table contains additional Routing Configuration for the IP interfaces. |
| 1.3.6.1.4.1.248.52.1.14.1.6.1 | RowhmSec2RedIfaceEntry | not-accessible | current | This table contains the per interface redundancy configuration. |
| 1.3.6.1.4.1.248.52.1.14.1.6.1.1 | ColumnhmSec2RedIfIndex | read-only | current | Index of IP interface in the table. |
| 1.3.6.1.4.1.248.52.1.14.1.6.1.2 | ColumnhmSec2RedVirtualAddr | read-write | current | Virtual IP address to be used for this Router IP interface. |
| 1.3.6.1.4.1.248.52.1.14.1.6.1.3 | ColumnhmSec2RedVRID | read-write | current | Virtual Router ID used on this network interface. The VRIDs have to be different on all network interfaces. There is no default value. |
| 1.3.6.1.4.1.248.52.1.14.1.6.1.4 | ColumnhmSec2RedRemoteIPAddr | read-write | current | IP address of the remote system on this network interface. On the master system the IP address of the backup system and vice versa. The virtual IP address must… |
| 1.3.6.1.4.1.248.52.1.14.1.7 | ScalarhmSec2RedSwitchCounter | read-only | current | Counter that counts the number of redundancy switches from master to backup system and vice versa. |
| 1.3.6.1.4.1.248.52.1.14.2 | NodehmSec2HostCheckGroup | |||
| 1.3.6.1.4.1.248.52.1.14.2.1 | ScalarhmSec2HostCheckAdminState | read-write | current | Redundancy ICMP host check (ping of host) admin state. The host check function tries to find the configured hosts in case of a network error (communication los… |
| 1.3.6.1.4.1.248.52.1.14.2.2 | ScalarhmSec2HostCheckNumAddrs | read-only | current | Additional host check function information. Shows the number of configured addresses. |
| 1.3.6.1.4.1.248.52.1.14.2.3 | ScalarhmSec2HostCheckOperState | read-only | current | Actual redundancy host check function of the device. The host check function is only running when packets of the redundancy application have been lost. |
| 1.3.6.1.4.1.248.52.1.14.2.4 | ScalarhmSec2HostCheckOperInfo | read-only | current | Additional host check function information. |
| 1.3.6.1.4.1.248.52.1.14.2.5 | TablehmSec2HostCheckTable | not-accessible | current | This table contains the hosts to be checked on network errors by the redundancy application. The order in the table is important for the host check algorithm. |
| 1.3.6.1.4.1.248.52.1.14.2.5.1 | RowhmSec2HostCheckEntry | not-accessible | current | This table contains the per interface redundancy configuration. The order in the table is important for the host check algorithm. The table has a maximum of co… |
| 1.3.6.1.4.1.248.52.1.14.2.5.1.1 | ColumnhmSec2HostCheckIfIndex | read-only | current | Index of IP interface in the table. |
| 1.3.6.1.4.1.248.52.1.14.2.5.1.2 | ColumnhmSec2HostCheckTableIndex | read-only | current | Index of entry in the table. |
| 1.3.6.1.4.1.248.52.1.14.2.5.1.3 | ColumnhmSec2HostCheckAddr | read-write | current | Host IP address to be used for ICMP checks (pings) in case of network errors (communication losses). |
| 1.3.6.1.4.1.248.52.1.14.2.5.1.4 | ColumnhmSec2HostCheckRowStatus | read-write | current | the row status for the table entry |
| 1.3.6.1.4.1.248.52.1.14.3 | NodehmSec2RedLayer2Group | |||
| 1.3.6.1.4.1.248.52.1.14.3.1 | ScalarhmSec2RedLayer2AdminState | read-write | current | Redundancy Layer2 admin state (enable/disable Layer2 redundancy support). The redundancy takes down the physical link automatically when the Link on the non-re… |
| 1.3.6.1.4.1.248.52.1.14.3.2 | ScalarhmSec2RedLayer2IfIndex | read-write | current | Index of the physical interface where the Layer2 redundancy is connected to. |
| 1.3.6.1.4.1.248.52.1.14.3.3 | ScalarhmSec2RedLayer2Packetcounter | read-only | current | Number of redundancy Layer 2 Ethernet packets sent through the system and have been passed to the other port. |
| 1.3.6.1.4.1.248.52.1.14.4 | NodehmSec2RedTransparentGroup | |||
| 1.3.6.1.4.1.248.52.1.14.4.1 | ScalarhmSec2RedTPRemoteIPAddr | read-write | current | IP address of the remote system in the transparent mode. On the master system the IP address of the backup system and vice versa. This IP address is used to sy… |
| 1.3.6.1.4.1.248.52.1.14.4.2 | ScalarhmSec2RedTPOperState | read-only | current | Actual redundancy transparent mode Firewall/NAT table synchronization operation state. |
| 1.3.6.1.4.1.248.52.1.14.4.3 | ScalarhmSec2RedTPOperInfo | read-only | current | Actual redundancy transparent mode Firewall/NAT table synchronization operation state information. |
| 1.3.6.1.4.1.248.52.1.14.4.4 | ScalarhmSec2RedTPCommunicationState | read-only | current | Actual redundancy transparent mode Firewall/NAT table synchronization communication state. Inactive communication may indicate that the system can not communic… |
| 1.3.6.1.4.1.248.52.1.15 | NodehmSec2Nat | |||
| 1.3.6.1.4.1.248.52.1.15.1 | NodehmSec2NatGeneralGroup | |||
| 1.3.6.1.4.1.248.52.1.15.1.1 | ScalarhmSec2NatMappingMax | read-write | current | Maximum number of simultaneous NAT mappings. |
| 1.3.6.1.4.1.248.52.1.15.1.2 | ScalarhmSec2NatTimeoutEstablished | read-write | current | Timeout in the NAT mapping table for established TCP connections. |
| 1.3.6.1.4.1.248.52.1.15.1.3 | ScalarhmSec2NatAllowOutputSameIface | read-write | current | If this value is enabled, the NAT component checks the NAT rules on outgoing packets also if the outgoing interface and the incoming interface is the same. Per… |
| 1.3.6.1.4.1.248.52.1.15.1.4 | ScalarhmSec2NatAutoDuplicateInvert | read-write | current | Internal usage only. |
| 1.3.6.1.4.1.248.52.1.15.1.5 | ScalarhmSec2NatDisallowVRRPAddrs | read-write | current | Internal usage only. |
| 1.3.6.1.4.1.248.52.1.15.2 | NodehmSec2NatRulesGroup | |||
| 1.3.6.1.4.1.248.52.1.15.2.1 | TablehmSec2NatTable | not-accessible | current | A list of NAPT rules. |
| 1.3.6.1.4.1.248.52.1.15.2.1.1 | RowhmSec2NatEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.1 | ColumnhmSec2NatIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.2 | ColumnhmSec2NatSrcNet | read-write | current | Network for NAPT transactions on local interface in CIDR notation (a.b.c.d/n) |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.3 | ColumnhmSec2NatAlg | read-write | current | Bitmask for application level gateway selections in this rule |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.4 | ColumnhmSec2NatDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.5 | ColumnhmSec2NatErrorText | read-only | current | Error text |
| 1.3.6.1.4.1.248.52.1.15.2.1.1.6 | ColumnhmSec2NatRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.15.2.2 | TablehmSec2Nat1To1Table | not-accessible | current | A list of 1:1 NAT rules. |
| 1.3.6.1.4.1.248.52.1.15.2.2.1 | RowhmSec2Nat1To1Entry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.1 | ColumnhmSec2Nat1To1Index | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.2 | ColumnhmSec2Nat1To1SrcNet | read-write | current | Network for 1:1 NAT on internal interface. |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.3 | ColumnhmSec2Nat1To1DstNet | read-write | current | Network for 1:1 NAT on external interface. |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.4 | ColumnhmSec2Nat1To1NetMask | read-write | current | Netmask for 1:1 NAT |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.5 | ColumnhmSec2Nat1To1Desc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.6 | ColumnhmSec2Nat1To1ErrorText | read-only | current | Error text |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.7 | ColumnhmSec2Nat1To1RowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.8 | ColumnhmSec2Nat1To1Alg | read-write | current | Bitmask for application level gateway selections in this rule |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.9 | ColumnhmSec2Nat1To1DoOutput | read-write | current | If this value is enabled, the 1:1 NAT does the NAT operation also when sending the packet. This means a twice NAT or destination NAT operation will be addition… |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.10 | ColumnhmSec2Nat1To1InvertDirection | read-write | current | If this value is enabled, the 1:1 NAT does the NAT operation in the opposite direction. This means the NAT operation is done from the view of the external inte… |
| 1.3.6.1.4.1.248.52.1.15.2.3 | TablehmSec2NatPortFwdTable | not-accessible | current | A list of port forwarding rules. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1 | RowhmSec2NatPortFwdEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.1 | ColumnhmSec2NatPortFwdIndex | read-only | current | An index that uniquely identifies the entry in the table. The index must be choosen in ascending and compact order. It may change if a rule (not the last in li… |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.2 | ColumnhmSec2NatPortFwdSrcNet | read-write | current | Source network in CIDR notation (a.b.c.d/n) thats allowed to be forwarded by this rule or the keyword 'any'. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.3 | ColumnhmSec2NatPortFwdSrcPort | read-write | current | Source port expression or the keyword 'any'. A port expressions is structured as 'op port' or 'port1 op port2', where 'op' is a mathematical operator for: o eq… |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.4 | ColumnhmSec2NatPortFwdDstNet | read-write | current | Destination IP address to be forwarded or the keyword '%extern'. This keyword stands for the first external IP address. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.5 | ColumnhmSec2NatPortFwdDstPort | read-write | current | Destination port expression in the form '= port'. The port must be specified as a decimal number or one of the aliases: o tcp/udp: echo (7) o tcp/udp: discard,… |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.6 | ColumnhmSec2NatPortFwdFwdNet | read-write | current | Redirect IP address. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.7 | ColumnhmSec2NatPortFwdFwdPort | read-write | current | Redirect port expression in the form '= port'. The port must be specified as a decimal number or one of the aliases: o tcp/udp: echo (7) o tcp/udp: discard, si… |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.8 | ColumnhmSec2NatPortFwdProto | read-write | current | The protocol as a decimal number (in range 1 - 255) or a name. The following protocol names are currently supported: o 'icmp': internet control message protoco… |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.9 | ColumnhmSec2NatPortFwdLog | read-write | current | Enables or disables logging for this port forwarding rule. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.10 | ColumnhmSec2NatPortFwdDesc | read-write | current | User defined text. |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.11 | ColumnhmSec2NatPortFwdErrorText | read-only | current | Error text |
| 1.3.6.1.4.1.248.52.1.15.2.3.1.12 | ColumnhmSec2NatPortFwdRowStatus | read-write | current | The row status of this table entry. |
| 1.3.6.1.4.1.248.52.1.20 | NodehmSec2Info | |||
| 1.3.6.1.4.1.248.52.1.20.1 | ScalarhmSec2DHCPLastAccessMAC | read-only | obsolete | MAC Address returns always 0:0:0:0:0:0. |
| 1.3.6.1.4.1.248.52.1.20.2 | ScalarhmSec2MiscTrapText | read-only | current | MIB object to include a text message in a trap. When read, it will always return an empty string. |
| 1.3.6.1.4.1.248.52.1.20.3 | ScalarhmSec2DigitalInStatus | read-only | current | The status of the digital input or not-available, if the status can not be determined or digtal-input not available. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DIFwRuleActivate | INTEGER { high-active(1), low-active(2) } | current | Digital-Input dependent Firewall rules activation |