HP-AUTH-MIB
368 objects
This MIB module describes objects for managing the Authentication features of devices in the HP Integrated Communication Facility product line.
Imported Objects
| HP-ICF-OID | hpSwitch |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| OSPF-MIB | ospfIfEntry ospfVirtIfEntry |
| RIPv2-MIB | rip2IfConfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.16 | IdentityhpSwitchAuthenticationMIB | This MIB module describes objects for managing the Authentication features of devices in the HP Integrated Communication Facility product line. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.0 | NodehpSwitchAuthNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.0.1 | NotificationhpSwitchPasswordExpiryNotify | current | An hpSwitchPasswordExpiryNotify notification that signifies that the password configured for the specified user has expired. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1 | NodehpSwitchAuthenticationConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.1 | ScalarhpSwitchNumLoginAttempts | read-write | current | The number of login attempts allowed, both per session and within the time of hpSwitchAuthLockoutDelay. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.2 | ScalarhpSwitchAuthRespectPriv | read-write | current | This object allows the switch to set privilege level of the session based on the received configuration variable from the authentication server. For RADIUS, th… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.3 | ScalarhpSwitchAuthenticationEncryptCredentialsMethod | read-write | current | This object determines the methods used to encrypt passwords configured on this device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.4 | ScalarhpSwitchAuthLockoutDelay | read-write | current | The number of seconds after repeated login failures before a user may again attempt login, and the period within which login rate is limited. When the value is… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.5 | ScalarhpSwitchMinimumPasswordLength | read-write | current | Minimum number of permissible characters required to set a new password for manager, operator, or local management privilege user. The exact range of valid val… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.6 | ScalarhpSwitchAuthAllowVlanTagged | read-write | current | When set to 'true', tagged VLAN membership changes are immediately applied on AAA enabled ports. By default, VLAN changes are postponed when there are authenti… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.7 | ScalarhpSwitchAuthenHideSensitiveData | read-write | current | This object enables/disables hiding of the sensitive data in standard secure-mode. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.8 | ScalarhpSwitchAuthUnlockUser | read-write | current | The User Name, in ASCII format. The exact size of this object is implementation dependent; the user will be unlocked, if the current state of the user is locke… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.9 | ScalarhpSwitchAuthUserBasedLockout | read-write | current | This object enables/disables the user-based-lockout. If this feature is enabled, the lockout is based on username and not based on the IP address. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.10 | ScalarhpSwitchAuthConsoleLockout | read-write | current | This object enables/disables the console-based-lockout feature. With this, we can have username based lockout for console. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.1.11 | ScalarhpSwitchTrackLoginAttempts | read-write | current | The period in days for which tracking of successful login attempts to be done. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2 | TablehpSwitchAuthenTable | not-accessible | current | This table lists the authentication methods to be tried for granting different access levels through various access tasks. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1 | RowhpSwitchAuthenEntry | not-accessible | current | An Authentication Method Table Entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.1 | ColumnhpSwitchAuthenIndex | not-accessible | current | Signifies the access task for which authentication methods are listed in this entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.2 | ColumnhpSwitchAuthenLoginPrimary | read-write | current | The value of this object indicates the primary login authentication mechanism. When a user logs in, the authentication method configured by this object will be… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.3 | ColumnhpSwitchAuthenLoginSecondary | read-write | current | The value of this object indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authenticati… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.4 | ColumnhpSwitchAuthenEnablePrimary | read-write | current | This object configures the primary authentication mechanism that will be tried first when a user requests manager-level access |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.5 | ColumnhpSwitchAuthenEnableSecondary | read-write | current | This object indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.6 | ColumnhpSwitchAuthenLoginServerGroupName | read-write | current | The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.7 | ColumnhpSwitchAuthenEnableServerGroupName | read-write | current | The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.8 | ColumnhpSwitchAuthenLoginTwoFactorType | read-write | current | This object configures the type of two-factor authentication |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.9 | ColumnhpSwitchAuthenEnableTwoFactorType | read-write | current | This object configures the type of two-factor authentication |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.10 | ColumnhpSwitchAuthenLoginSecondAuthMethod | read-write | current | This object configures the password configuration for two-factor authentication |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.11 | ColumnhpSwitchAuthenEnableSecondAuthMethod | read-write | current | This object configures the password configuration for two-factor authentication |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.12 | ColumnhpSwitchAuthenClientPrimary | read-write | current | This object configures the primary authentication for SSH when the switch acts as a client. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.13 | ColumnhpSwitchAuthenClientSecondary | read-write | current | This object indicates the secondary login authentication for SSH when the switch acts as a client. This is a placeholder as secondary authentication is not cur… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.14 | ColumnhpSwitchAuthenCachedReauthAuthorized | read-write | current | When the value of object hpSwitchAuthenLoginSecondary is set to cachedReauth(4),the ture value set for this object indicates cachedReauth authentication method… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3 | NodehpSwitchTacacsConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.1 | ScalarhpSwitchTacacsTimeout | read-write | current | The duration in seconds to wait for a response from the TACACS+ server host. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.2 | ScalarhpSwitchTacacsAuthKey | read-write | current | The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.3 | ScalarhpSwitchTacacsAuthKeyEncrypted | read-write | current | An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the ser… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.4 | ScalarhpSwitchTacacsDeadTime | read-write | current | This object specifies the TACACS+ server unavailability time. When a response is not received from a TACACS+ server, that server is then not contacted for Auth… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.5 | ScalarhpSwitchTacacsOrderingSequence | read-write | current | When this object is set to true, reordering of TACACS+ servers takes place upon deletion of an existing server, such that further addition of a new TACACS+ ser… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.3.6 | ScalarhpSwitchTacacsServerFqdnRetry | read-write | current | The interval at which the resolution of the FQDN is retried for the tacacs server which failed to resolve the FQDN at the time of configuring it. Retry interva… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4 | TablehpSwitchTacacsServersTable | not-accessible | current | This table lists a maximum of 3 TACACS+ servers. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1 | RowhpSwitchTacacsServersEntry | not-accessible | current | A TACACS+ server table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.1 | ColumnhpSwitchTacacsServerIndex | not-accessible | current | The index value which uniquely identifies a row in the TACACS+ Servers Table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.2 | ColumnhpSwitchTacacsServerIpAddr | read-create | current | The IP address of a TACACS+ Server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.3 | ColumnhpSwitchTacacsServerKey | read-create | current | The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.4 | ColumnhpSwitchTacacsServerStatus | read-create | current | Status of Servers Table row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.5 | ColumnhpSwitchTacacsServerIsOobm | read-create | current | This object indicates whether this TACACS+ Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if … |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.6 | ColumnhpSwitchTacacsServerKeyEncrypted | read-create | current | An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the ser… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.7 | ColumnhpSwitchTacacsServerAddressType | read-create | current | Type of TACACS+ Server IP Address stored in hpSwitchTacacsServerAddress. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.8 | ColumnhpSwitchTacacsServerAddress | read-create | current | The IPv4 or IPv6 Address of the TACACS+ server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.9 | ColumnhpSwitchTacacsServerFqdn | read-create | current | The FQDN address of TACACS Server.When the TACACS server has been configured with static IPv6 address or IPv4 address, the value of this object will be set to … |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5 | TablehpTacacsStatsServersTable | not-accessible | current | A table containing statistics for the configured TACACS+ servers. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1 | RowhpTacacsStatsServersEntry | not-accessible | current | The information associated with each row in the TACACS+ servers table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.1 | ColumnhpTacacsStatsServerIndex | not-accessible | current | The index identifying the row in the table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.2 | ColumnhpTacacsStatsTacacsServerIpAddr | read-only | current | The IP address of a TACACS+ Server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.3 | ColumnhpTacacsStatsNumSessOpened | read-only | current | The number of authentication, authorization and accounting sessions opened with the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.4 | ColumnhpTacacsStatsNumSessClosed | read-only | current | The number of authentication, authorization and accounting sessions closed with the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.5 | ColumnhpTacacsStatsNumSessAborted | read-only | current | The number of authentication, authorization and accounting sessions aborted with the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.6 | ColumnhpTacacsStatsNumSessErrors | read-only | current | The number of authentication, authorization and accounting sessions with this server resulted in an error. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.7 | ColumnhpTacacsStatsNumPktsIn | read-only | current | The number of responses received from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.8 | ColumnhpTacacsStatsNumPktsOut | read-only | current | The number of requests sent to the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.9 | ColumnhpTacacsStatsNumAuthPktsIn | read-only | current | The number of authentication responses received from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.10 | ColumnhpTacacsStatsNumAuthPktsOut | read-only | current | The number of authentication requests sent to the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.11 | ColumnhpTacacsStatsNumAuthPktsTimedOut | read-only | current | The number of authentication requests that timed out due to no response from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.12 | ColumnhpTacacsStatsNumAutzPktsIn | read-only | current | The number of authorization responses received from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.13 | ColumnhpTacacsStatsNumAutzPktsOut | read-only | current | The number of authorization requests sent to the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.14 | ColumnhpTacacsStatsNumAutzPktsTimedOut | read-only | current | The number of authorization requests that timed out due to no response from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.15 | ColumnhpTacacsStatsNumAcctPktsIn | read-only | current | The number of accounting responses received from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.16 | ColumnhpTacacsStatsNumAcctPktsOut | read-only | current | The number of accounting requests sent to the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.17 | ColumnhpTacacsStatsNumAcctPktsTimedOut | read-only | current | The number of accounting requests that timed out due to no response from the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.18 | ColumnhpTacacsStatsTacacsServerAdrType | read-only | current | Type of TACACS+ Server IP Address stored in hpTacacsStatsTacacsServerAddr. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.19 | ColumnhpTacacsStatsTacacsServerAddr | read-only | current | The IPv4 or IPv6 Address of the TACACS+ server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6 | NodehpSwitchRadiusConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.1 | ScalarhpSwitchRadiusDeadTime | read-write | current | The length of time in minutes a RADIUS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when some … |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.2 | ScalarhpSwitchRadiusTimeout | read-write | current | The duration in seconds to wait for a response from the RADIUS server host. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.3 | ScalarhpSwitchRadiusRetransmitAttempts | read-write | current | Maximum number of retransmission attempts. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.4 | ScalarhpSwitchRadiusAuthKey | read-write | current | The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.5 | ScalarhpSwitchRadiusDynAutzPortNumber | read-write | current | The UDP port number to listen for Disconnect and Change-of-Authorization messages. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.6 | ScalarhpSwitchRadiusAuthKeyEncrypted | read-write | current | An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the serv… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.10 | ScalarhpSwitchRadiusTracking | read-write | current | To enable or disable the RADIUS service tracking. If this feature is enabled, it is used to send access-request packets at regular intervals to track the avail… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.11 | ScalarhpSwitchRadiusTrackingUserName | read-write | current | This user name will be used to send Access-Request packets to the RADIUS server to track it. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.12 | ScalarhpSwitchRadiusCppmIdentity | read-write | current | The ClearPass identity value to be used during authentication with ClearPass server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.13 | ScalarhpSwitchRadiusCppmKey | read-write | current | The ClearPass key value to be used during authentication with ClearPass server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.14 | ScalarhpSwitchRadiusCppmEncryptedKey | read-write | current | The encrypted ClearPass key value to be used during authentication with ClearPass server.The key value used to set this object should be read from a compatible… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.15 | ScalarhpSwitchRadiusDeadTimeInfinite | read-write | current | If this is set to true, a dead RADIUS server is skipped over by transaction requests until the RADIUS server is tracked up and alive by RADIUS tracking. The de… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.16 | ScalarhpSwitchRadiusTrackingInterval | read-write | current | The regular time interval in seconds at which RADIUS access-request packets are sent to track the availability of RADIUS server. The default time interval is 5… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.17 | ScalarhpSwitchRadiusTrackingPassword | read-write | current | This password will be used in Access-Request packets sent to the RADIUS server to track it. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.18 | ScalarhpSwitchRadiusTrackDeadOnly | read-write | current | If this is set to true, RADIUS tracking packets are sent only to dead servers. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.19 | ScalarhpSwitchRadiusTrackReqPktCount | read-write | current | Number of Access Request Packet to be sent for tracking. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.20 | ScalarhpSwitchRadiusTrackPassEncrypt | read-write | current | The password is configured in the encrypted form. The password after decryption is sent in Access-Request packet to the RADIUS server for tracking. This object… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.21 | ScalarhpSwitchRadiusFramedIpv4Address | read-write | current | If this is set to true, framedIpv4Address attribute will be added to the access-request packet. The default value is set to FLASE. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.22 | ScalarhpSwitchRadiusFqdnRetry | read-write | current | The interval at which the resolution of the FQDN is retried for the radius server which failed to resolve the FQDN at the time of configuring it. Retry interva… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.23 | ScalarhpSwitchRadiusExcludeVsa | read-write | current | If this is set to true, RADIUS packets are sent without VSA capability advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.24 | ScalarhpSwitchRadiusTLSTimeout | read-write | current | The duration in seconds to wait for a response from the RADIUS TLS server host. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.25 | ScalarhpSwitchRadiusTLSConnectionTimeout | read-write | current | The duration in seconds to wait for a response from the server during TLS session establishment. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.26 | ScalarhpSwitchRadiusTLSDeadTime | read-write | current | The length of time in minutes a RADIUS TLS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when s… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.27 | ScalarhpSwitchRadiusTLSDeadTimeInfinite | read-write | current | If this is set to true, a dead RADIUS TLS server is skipped over by transaction requests until the RADIUS TLS server is tracked up and alive by RADIUS tracking… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.6.28 | ScalarhpSwitchRadiusTunnelPrivateGroupId | read-write | current | If value is set to static, statically configured untagged VLAN Identifier for the port will be sent as the value of 'Tunnel-Private-Group-ID' attribute in RADI… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7 | TablehpSwitchRadiusServerTable | not-accessible | current | This table lists a maximum of 3 RADIUS servers. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1 | RowhpSwitchRadiusServerEntry | not-accessible | current | A RADIUS server table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1 | ColumnhpSwitchRadiusServerIndex | not-accessible | current | The index value which uniquely identifies a row in the RADIUS Servers Table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2 | ColumnhpSwitchRadiusServerIpAddr | read-create | deprecated | The IP address of a RADIUS Server. When the RADIUS server has been configured with IPv6 address, the value of this object will be set to Null. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3 | ColumnhpSwitchRadiusServerKey | read-create | current | The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4 | ColumnhpSwitchRadiusServerAuthPortNumber | read-create | current | The UDP destination port number to use for sending authentication requests to this RADIUS Server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5 | ColumnhpSwitchRadiusServerAcctPortNumber | read-create | current | The UDP destination port number to use for sending accounting requests to this RADIUS server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6 | ColumnhpSwitchRadiusServerDynAutzEnabled | read-create | current | This object indicates whether Dynamic Authorization messages (Disconnect-Requests and CoA-Requests) are authorized for processing from this RADIUS Server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7 | ColumnhpSwitchRadiusServerDynAutzTimeWindow | read-create | current | A non-zero value indicates that the Event-Timestamp attribute must be used in the dynamic authorization communication exchange between the NAS and the RADIUS s… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8 | ColumnhpSwitchRadiusServerStatus | read-create | current | Status of Servers Table row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9 | ColumnhpSwitchRadiusServerIsOobm | read-create | current | This object indicates whether this RADIUS Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10 | ColumnhpSwitchRadiusServerKeyEncrypted | read-create | current | An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the serv… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.11 | ColumnhpSwitchRadiusServerAddrType | read-create | current | Type of RADIUS Server IP Address stored in hpSwitchRadiusServerAddress. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.12 | ColumnhpSwitchRadiusServerAddress | read-create | current | The IPv4 or IPv6 Address of the RADIUS server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.13 | ColumnhpSwitchRadiusServerDynAutzTimeWindowType | read-create | current | Window type indicates the acceptable window size for dynamic authorization messages. Positive window type will allow messages when time difference between send… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.14 | ColumnhpSwitchRadiusServerFqdn | read-create | current | The FQDN address of RADIUS Server. When the RADIUS server has been configured with IPv6 address of IPv4 address, the value of this object will be set to Null. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.15 | ColumnhpSwitchRadiusServerIsClearPass | read-create | current | This object indicates whether this RADIUS Server is hosted by ClearPass or not.This mib object will be applicable only if there is a Hosted ClearPass server |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.16 | ColumnhpSwitchRadiusTLSEnable | read-create | current | This object enables the RADSEC protocol and encrypts the RADIUS messages using TLS by establishing a TCP connection with the RADIUS server. By default, it is n… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.17 | ColumnhpSwitchRadiusTLSPort | read-create | current | The destination TCP port number to use for establishing a connection with RADIUS TLS server. The default value is 2083. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.18 | ColumnhpSwitchRadiusTLSRetryTimer | read-only | current | The number of minutes after which the RADIUS Server TLS connection will be re-established. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11 | NodehpSwitchAuthenticationMIBConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1 | NodehpSwitchAuthenticationMIBCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.1 | CompliancehpSwitchAuthenticationMIBCompliance | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.2 | CompliancehpSwitchAuthenticationMIBCompliance1 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.3 | CompliancehpSwitchAuthenticationMIBCompliance2 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.4 | CompliancehpSwitchAuthenticationMIBComplianceOobm | deprecated | The compliance statement for devices implementing the HP Authentication Mib with OOBM support | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.5 | CompliancehpSwitchUserConfigMIBCompliance | deprecated | The compliance statement for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.6 | CompliancehpSwitchAAAServerMIBCompliance | deprecated | The compliance statement for configuring RADIUS server groups. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.7 | CompliancehpSwitchAuthenMIBCompliance | current | The compliance statement for listing the authentication methods to be tried for granting different access levels through various access tasks | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.8 | CompliancehpSwitchLocalMgmtPrivUserMIBCompliance | read-only | deprecated | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.9 | CompliancehpSwitchAuthenticationMIBCompliance3 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.10 | CompliancehpSwitchUserConfigMIBCompliance1 | deprecated | The compliance statement for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.11 | CompliancehpSwitchLocalMgmtPrivUserMIBCompliance1 | current | The compliance statement for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.12 | CompliancehpSwitchAuthenticationMIBCompliance4 | deprecated | The compliance statement for devices implementing the HP Authentication MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.13 | CompliancehpSwitchAuthenticationMIBCompliance5 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.14 | CompliancehpSwitchAuthenticationMIBComplianceOobm1 | deprecated | The compliance statement for devices implementing the HP Authentication Mib with OOBM support | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.15 | CompliancehpSwitchAuthenticationMIBCompliance6 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.16 | CompliancehpSwitchAuthenticationMIBCompliance7 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.17 | CompliancehpSwitchAuthenticationMIBCompliance8 | current | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.18 | CompliancehpSwitchAuthenticationMIBCompliance9 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.19 | CompliancehpSwitchAuthenticationMIBCompliance10 | deprecated | The compliance statement for devices implementing the HP password Authentication MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.20 | CompliancehpSwitchLocalMgmtPrivUserMIBCompliance2 | read-only | deprecated | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.21 | CompliancehpSwitchUserConfigMIBCompliance2 | deprecated | The compliance statement for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.22 | CompliancehpSwitchAuthenticationMIBCompliance11 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.23 | CompliancehpSwitchAuthenticationMIBCompliance12 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.24 | CompliancehpSwitchUserConfigMIBCompliance3 | current | The compliance statement for configuring username and password for operator, manager or port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.25 | CompliancehpSwitchLocalMgmtPrivUserMIBCompliance3 | read-only | current | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.26 | CompliancehpSwitchAuthenticationMIBCompliance13 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.27 | CompliancehpSwitchAuthenticationMIBCompliance14 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.28 | CompliancehpSwitchAuthenticationMIBCompliance15 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.29 | CompliancehpSwitchAuthenticationMIBCompliance16 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.30 | CompliancehpSwitchFrontPanelSecurityCompliance | current | The compliance statement for configuring front panel security commands. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.31 | CompliancehpSwitchAuthenticationMIBCompliance17 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.32 | CompliancehpSwitchAuthenticationMIBCompliance18 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.33 | CompliancehpSwitchAuthenticationMIBCompliance19 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.34 | CompliancehpSwitchAuthenticationMIBComplianceOobm2 | current | The compliance statement for devices implementing the HP Authentication Mib with OOBM support | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.35 | CompliancehpSwitchAuthenticationMIBCompliance20 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.37 | CompliancehpSwitchAuthenticationMIBCompliance21 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.38 | CompliancehpSwitchAuthenticationMIBCompliance22 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.39 | CompliancehpSwitchAuthenticationMIBCompliance23 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.40 | CompliancehpSwitchAuthenticationMIBCompliance24 | current | The compliance statement for devices implementing the HP password Authentication MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.42 | CompliancehpSwitchAuthenticationMIBCompliance26 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.43 | CompliancehpSwitchAuthenticationMIBCompliance27 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.44 | CompliancehpSwitchAAAServerMIBCompliance2 | current | The compliance statement for configuring RADIUS server groups. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.45 | CompliancehpSwitchAuthenticationMIBCompliance28 | deprecated | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.46 | CompliancehpSwitchAuthenticationMIBCompliance29 | current | The compliance statement for devices implementing the HP Authentication Mib. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2 | NodehpSwitchAuthenticationMIBGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.1 | GrouphpSwitchAuthenticationConfigGroup | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.2 | GrouphpSwitchTacacsConfigGroup | deprecated | A collection of objects for configuring the state of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.3 | GrouphpSwitchTacacsStatsGroup | deprecated | A collection of objects for viewing the status information of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.4 | GrouphpSwitchRadiusConfigGroup | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.6 | GrouphpSwitchKmsGroup | deprecated | A collection of objects for configuring KMS functionality. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.7 | GrouphpSwitchOspfAuthGroup | deprecated | A collection of objects for configuring OSPF authentication. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.8 | GrouphpSwitchAuthenticationConfigGroup1 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.9 | GrouphpSwitchSslGroup | current | A collection of objects for configuring SSL Servers. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.10 | GrouphpSwitchCertGroup | current | A collection of objects for configuring Certificates. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.11 | GrouphpSwitchCertStatusGroup | current | A collection of objects for configuring Certificate Status. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.12 | GrouphpSwitchTacacsOobmGroup | deprecated | A collection of objects for configuring the TACACS+ server entry with support for OOBM (Out of Band Management) interface. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.13 | GrouphpSwitchRadiusOobmGroup | deprecated | A collection of objects for configuring the RADIUS server entry with support for OOBM (Out of Band Management) interface. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.14 | GrouphpSwitchCertStatusGroup2 | deprecated | A collection of objects for configuring Certificate Status. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.15 | GrouphpSwitchUserConfigGroup | deprecated | A collection of objects for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.16 | GrouphpSwitchAAAServerGroup | deprecated | A collection of objects for configuring RADIUS server groups. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.17 | GrouphpSwitchAuthenGroup | current | A collection of objects for listing the authentication methods to be tried for granting different access levels through various access tasks. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.18 | GrouphpSwitchAuthLocalMgmtPrivUserGroup | deprecated | A collection of objects for configuring Local Management Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.19 | GrouphpSwitchTacacsConfigGroup1 | deprecated | A collection of objects for configuring the state of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.20 | GrouphpSwitchRadiusConfigGroup1 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.21 | GrouphpSwitchKmsGroup1 | current | A collection of objects for configuring KMS functionality. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.22 | GrouphpSwitchUserConfigGroup1 | deprecated | A collection of objects for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.23 | GrouphpSwitchAuthLocalMgmtPrivUserGroup1 | current | Row Status of objects for configuring Local Management Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.24 | GrouphpSwitchCertStatusGroup3 | current | A collection of objects for configuring Certificate Keys. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.25 | GrouphpSwitchAuthenticationConfigGroup2 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.26 | GrouphpSwitchRadiusConfigGroup2 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.27 | GrouphpSwitchAuthenticationConfigGroup3 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.28 | GrouphpSwitchAuthenticationConfigGroup4 | current | A collection of objects which controls bypassing of the username during authentication to get Operator or Manager access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.29 | GrouphpSwitchRadiusConfigGroup3 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.31 | GrouphpSwitchRipAuthGroup | deprecated | A collection of objects for configuring RIP authentication. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.32 | GrouphpSwitchAuthenticationPasswordConfigGroup | deprecated | A collection of objects for configuring the password authentication features as per UCR guidelines. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.33 | GrouphpSwitchUserConfigGroup2 | deprecated | A collection of objects for configuring user-name/password for operator/manager/port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.34 | GrouphpSwitchAuthLocalMgmtPrivUserGroup2 | deprecated | A collection of objects for configuring Local Management Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.35 | GrouphpSwitchAuthNotificationGroup | current | A collection of objects that lists the authentication notifications. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.36 | GrouphpSwitchRadiusConfigGroup4 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.37 | GrouphpSwitchAuthenticationConfigGroup5 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.38 | GrouphpSwitchUserConfigGroup3 | current | A collection of objects for configuring username and password for operator, manager or port-access. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.39 | GrouphpSwitchAuthLocalMgmtPrivUserGroup3 | current | A collection of objects for configuring Local Management Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.40 | GrouphpSwitchOspfAuthGroup1 | current | A collection of objects for configuring OSPF authentication. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.41 | GrouphpSwitchRipAuthGroup1 | current | A collection of objects for configuring RIP authentication. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.42 | GrouphpSwitchAuthenticationConfigGroup6 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.43 | GrouphpSwitchAuthenticationConfigGroup7 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.44 | GrouphpSwitchRadiusConfigGroup5 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.45 | GrouphpSwitchFrontPanelSecurityGroup | current | A collection of objects for configuring front panel security commands. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.46 | GrouphpSwitchRadiusConfigGroup6 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.47 | GrouphpSwitchAuthenticationConfigGroup8 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.48 | GrouphpSwitchRadiusConfigGroup7 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.49 | GrouphpSwitchAuthenticationConfigGroup9 | deprecated | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.50 | GrouphpSwitchTacacsConfigGroup2 | deprecated | A collection of objects for configuring the state of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.51 | GrouphpSwitchTacacsStatsGroup1 | current | A collection of objects for viewing the status information of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.52 | GrouphpSwitchTacacsOobmGroup1 | current | A collection of objects for configuring the TACACS+ server entry with support for OOBM (Out of Band Management) interface. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.53 | GrouphpSwitchRadiusConfigGroup8 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.54 | GrouphpSwitchRadiusConfigGroup9 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.55 | GrouphpSwitchRadiusConfigGroup10 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.56 | GrouphpSwitchRadiusConfigGroup11 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.57 | GrouphpSwitchAuthenticationPasswordConfigGroup1 | current | A collection of objects for configuring the password authentication features as per UCR guidelines. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.58 | GrouphpSwitchAuthenticationConfigGroup10 | current | A collection of objects for configuring the authentication features. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.59 | GrouphpSwitchTacacsConfigGroup3 | deprecated | A collection of objects for configuring the state of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.60 | GrouphpSwitchRadiusConfigGroup12 | deprecated | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.61 | GrouphpSwitchAAAServerGroup2 | current | A collection of objects for configuring RADIUS server groups. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.62 | GrouphpSwitchTacacsConfigGroup4 | current | A collection of objects for configuring the state of the TACACS+ protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.63 | GrouphpSwitchRadiusConfigGroup13 | current | A collection of objects for configuring the state of the RADIUS protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.12 | NodehpSwitchSslConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.12.1 | ScalarhpSwitchSslAdminStatus | read-write | current | This objects specifies the desired operational status of SSL. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.12.2 | ScalarhpSwitchSslPortNumber | read-write | current | The port number on which the SSL server should listen for connection requests. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13 | NodehpSwitchCertConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.1 | ScalarhpSwitchServerCertificateOperation | read-write | current | When this object is read, it returns the last value that was written. If a value was not set previously, then the object value will be 'none'(1). The object su… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.2 | ScalarhpSwitchServerNewRSAKeyOperation | read-write | current | This object when will returns a value either 'useInstalled'(1) or 'createBits1024'(4). The value 'useInstalled'(1) is returned when a certificate RSA key alrea… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.3 | ScalarhpSwitchServerNewCertificateStartDate | read-write | current | Specifies the start date of validity for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.4 | ScalarhpSwitchServerNewCertificateEndDate | read-write | current | Specifies the end date of validity for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.5 | ScalarhpSwitchServerNewCertificateCommonName | read-write | deprecated | Specifies the common name for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.6 | ScalarhpSwitchServerNewCertificateOrgUnit | read-write | deprecated | Specifies the organization for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.7 | ScalarhpSwitchServerNewCertificateOrgName | read-write | deprecated | Specifies the organization name for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.8 | ScalarhpSwitchServerNewCertificateCityName | read-write | deprecated | Specifies the city for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.9 | ScalarhpSwitchServerNewCertificateStateName | read-write | deprecated | Specifies the state for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.10 | ScalarhpSwitchServerNewCertificateCountryCode | read-write | current | Specifies the 2-letter ISO country code of the server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.11 | ScalarhpSwitchServerNewCertCommonName | read-write | current | Specifies the common name for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.12 | ScalarhpSwitchServerNewCertOrgUnit | read-write | current | Specifies the organization for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.13 | ScalarhpSwitchServerNewCertOrgName | read-write | current | Specifies the organization name for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.14 | ScalarhpSwitchServerNewCertCityName | read-write | current | Specifies the city for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.15 | ScalarhpSwitchServerNewCertStateName | read-write | current | Specifies the state for a new server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.13.16 | ScalarhpSwitchServerNewCertKeySizeExists | read-write | current | Specifies whether the given key size already exist. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14 | NodehpSwitchCertStatus | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.1 | ScalarhpSwitchServerCertificateType | read-only | current | Specifies the type of server certificate the switch is currently using as follows: 'none' - no server certificate is present. 'pendCaSigned' - switch is waitin… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.2 | ScalarhpSwitchServerCertificateRSAKeySize | read-only | current | Specifies the RSA key length of the public key contained in the certificate as follows: 'none' - no certificate is present 'Bits512' - certificate has a 512-bi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.3 | ScalarhpSwitchServerCertificateSerialNumber | read-only | current | Specifies the serial number of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.4 | ScalarhpSwitchServerCertificateStartDate | read-only | current | Specifies the start date of validity of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.5 | ScalarhpSwitchServerCertificateEndDate | read-only | current | Specifies the end date of validity of installed server server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.6 | ScalarhpSwitchServerCertificateCommonName | read-only | current | Specifies the common name of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.7 | ScalarhpSwitchServerCertificateOrgUnit | read-only | current | Specifies the organization of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.8 | ScalarhpSwitchServerCertificateOrgName | read-only | current | Specifies the organization name of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.9 | ScalarhpSwitchServerCertificateCityName | read-only | current | Specifies the city of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.10 | ScalarhpSwitchServerCertificateStateName | read-only | current | Specifies the state of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.11 | ScalarhpSwitchServerCertificateCountryCode | read-only | current | Specifies the 2-letter ISO country code of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.12 | ScalarhpSwitchServerCertificateFingerprintMD5 | read-only | current | Specifies the MD5 fingerprint of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.14.13 | ScalarhpSwitchServerCertificateFingerprintSHA1 | read-only | current | Specifies the SHA1 fingerprint of installed server certificate. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15 | TablehpSwitchKmsChainConfigTable | not-accessible | current | This table contains configuration objects for Key Management Subsystem chains. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1 | RowhpSwitchKmsChainConfigEntry | not-accessible | current | KMS chain configuration table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.1 | ColumnhpSwitchKmsChainId | not-accessible | current | This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName as the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.2 | ColumnhpSwitchKmsChainName | read-create | current | This object configures the KMS chain name. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.4 | ColumnhpSwitchKmsChainKeys | read-only | current | Returns the number of keys in the KMS chain. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.5 | ColumnhpSwitchKmsChainActiveKeys | read-only | current | Returns the number of active keys in the KMS chain. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.6 | ColumnhpSwitchKmsChainExpKeys | read-only | current | Returns the number of expired keys in the KMS chain. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.7 | ColumnhpSwitchKmsChainStatus | read-create | current | The status of the row in the KMS chain configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16 | TablehpSwitchKmsKeyConfigTable | not-accessible | current | This table contains the configuration objects for the Key Management Subsystem. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1 | RowhpSwitchKmsKeyConfigEntry | not-accessible | current | KMS configuration table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.1 | ColumnhpSwitchKmsKeyChainId | not-accessible | current | This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName as the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.2 | ColumnhpSwitchKmsKeyId | not-accessible | current | This object is the KMS key index. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.3 | ColumnhpSwitchKmsKeyStr | read-create | current | This object configures the KMS key chain name. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.4 | ColumnhpSwitchKmsKeyStartTime | read-create | current | Start time of the KMS key. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.5 | ColumnhpSwitchKmsKeyStopTime | read-create | current | Stop time of the KMS key. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.6 | ColumnhpSwitchKmsKeyTxStartTime | read-create | current | Start time of the transmission for the KMS key. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.7 | ColumnhpSwitchKmsKeyTxStopTime | read-create | current | Stop time of the transmission for the KMS key. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.8 | ColumnhpSwitchKmsKeyStatus | read-create | current | Row Status of the KMS chain configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.9 | ColumnhpSwitchKmsKeyEncrypted | read-create | current | An encrypted form of the KMS key. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.17 | TablehpSwitchOspfIfAuthTable | not-accessible | current | This table supplements the OSPF interface configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.17.1 | RowhpSwitchOspfIfAuthEntry | not-accessible | current | OSPF interface authentication configuration table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.1 | ColumnhpSwitchOspfIfAuthChain | read-create | current | This object configures the KMS chain name for OSPF interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.2 | ColumnhpSwitchOspfIfAuthKeyEncrypted | read-create | current | The object represents the encrypted format of authentication key stored in the object ospfIfAuthKey. This object may only be read or written when hpSwitchAuthe… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.18 | TablehpSwitchOspfVirtIfAuthTable | not-accessible | current | This table supplements the OSPF virtual interface configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.18.1 | RowhpSwitchOspfVirtIfAuthEntry | not-accessible | current | OSPF virtual interface authentication configuration table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.1 | ColumnhpSwitchOspfVirtIfAuthChain | read-create | current | This object configures the KMS chain name for OSPF virtual interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.2 | ColumnhpSwitchOspfVirtIfAuthKeyEncrypted | read-create | current | This object represents the encrypted format of authentication key stored in the object ospfVirtIfAuthKey. This object may only be read or written when hpSwitch… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19 | TablehpicfSwitchUserConfigTable | not-accessible | current | This table supplements the manager/operator name/password. The manager/operator password are limited to the CLI interface through Console and Menu interface, a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1 | RowhpicfSwitchUserConfigEntry | not-accessible | current | Manager/operator name/password table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.1 | ColumnhpicfSwitchUserConfigIndex | not-accessible | current | The index value uniquely identifies a row in the User Config table, currently limited to a value of 1. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.2 | ColumnhpicfSwitchUserName | read-create | current | The User Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size fo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.3 | ColumnhpicfSwitchOperatorName | read-create | current | The Operator Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported siz… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.4 | ColumnhpicfSwitchUserPassword | read-create | current | The User Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported siz… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.5 | ColumnhpicfSwitchOperatorPassword | read-create | current | The Operator Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.6 | ColumnhpicfSwitchUserConfigStatus | read-create | current | Status of User Config Table row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.7 | ColumnhpicfSwitchPortAccessName | read-create | current | The Port-Access Name, ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported siz… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.8 | ColumnhpicfSwitchPortAccessPassword | read-create | current | The Port-Access Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the suppor… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.9 | ColumnhpicfSwitchUserPasswordHashType | read-create | current | The hash-type of the User Password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.10 | ColumnhpicfSwitchOperatorPasswordHashType | read-create | current | The hash-type of the Operator Password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.11 | ColumnhpicfSwitchPortAccessPasswordHashType | read-create | current | The hash-type of the Port-Access Password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.12 | ColumnhpicfSwitchUserPasswordEncrypted | read-create | current | An encrypted form of the user password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.13 | ColumnhpicfSwitchOperatorPasswordEncrypted | read-create | current | An encrypted form of the operator password. The exact size of this object is implementation dependent; consult the product documentation to determine the suppo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.14 | ColumnhpicfSwitchPortAccessPasswordEncrypted | read-create | current | An encrypted form of the port-access password. The exact size of this object is implementation dependent; consult the product documentation to determine the su… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.15 | ColumnhpicfSwitchBypassUsername | read-create | current | This object controls bypassing of the username while accessing the switch to get Operator or Manager access. When enabled, the Manager level and Operator level… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.16 | ColumnhpicfSwitchUserPwdAgingInterval | read-create | current | This object holds the manager password aging value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.17 | ColumnhpicfSwitchOperatorPwdAgingInterval | read-create | current | This object holds the operator password aging value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.18 | ColumnhpicfSwitchUserPwdLengthValue | read-create | current | This object holds length of the manager password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.19 | ColumnhpicfSwitchOperatorPwdLengthValue | read-create | current | This object holds length of the operator password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.20 | ColumnhpicfSwitchNonPlaintextSha256 | read-create | current | This object enables storing the password in SHA-256 form. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.21 | ColumnhpicfSwitchUserPasswordHashSha256 | read-create | current | The SHA256 hash-type of the Manager Password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.22 | ColumnhpicfSwitchOperatorPasswordHashSha256 | read-create | current | The SHA256 hash-type of the Operator Password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20 | TablehpSwitchAAAServerGroupTable | not-accessible | current | This table lists the RADIUS server groups. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1 | RowhpSwitchAAAServerGroupEntry | not-accessible | current | RADIUS server group entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.1 | ColumnhpSwitchAAAServerGroupProtocolType | not-accessible | current | This part of the index indicates which protocol server the server group is for. See the documentation protocols supported. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.2 | ColumnhpSwitchAAAServerGroupIndex | not-accessible | current | This index indicates the server group in the AAA server group table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.3 | ColumnhpSwitchAAAServerGroupServerIndex | not-accessible | current | The index value which identifies the server in the server group. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.4 | ColumnhpSwitchAAAServerGroupName | read-create | current | The name of a given AAA server group. The current maximum length is 12. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.5 | ColumnhpSwitchAAAServerGroupServerInetType | read-create | current | The IP Address type of the server. Currently only Ipv4 is supported. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.6 | ColumnhpSwitchAAAServerGroupServerInetAddr | read-create | current | The IP Address of the server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.7 | ColumnhpSwitchAAAServerGroupStatus | read-create | current | The status of the AAA server group row. Supported values are createAndGo, destroy, and active. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.8 | ColumnhpSwitchAAAServerGroupServerFqdn | read-create | current | The FQDN address of RADIUS Server. When the RADIUS server has been configured with IPv6 address of IPv4 address, the value of this object will be set to Null. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.9 | ColumnhpSwitchAAAServerGroupTLSEnable | read-create | current | This object differentiates whether the RADIUS server connection is TLS enabled or not. By default, it is not TLS enabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21 | TablehpSwitchLocalMgmtPrivUsernamesTable | not-accessible | current | This table lists the Local Management Privilege user names. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1 | RowhpSwitchLocalMgmtPrivUsernamesEntry | not-accessible | current | Local Management Usernames entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.1 | ColumnhpSwitchLocalMgmtPrivUsernameIndex | not-accessible | current | The index value uniquely identifies a row in the command table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.2 | ColumnhpSwitchLocalMgmtPrivUsernameStr | read-create | current | The username . |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.3 | ColumnhpSwitchLocalMgmtPrivUsernamePasswdType | read-create | current | The type of encryption used for this Conceptual row password object. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.4 | ColumnhpSwitchLocalMgmtPrivUsernamePasswd | read-create | current | Storage location for the password associated with this Username. Always returns a NULL string. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.5 | ColumnhpSwitchLocalMgmtPrivUsernameGrpIndex | read-create | current | The index that represents which group this user is a member of. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.6 | ColumnhpSwitchLocalMgmtPrivUsernameStatus | read-create | current | The status of the Local Management Privilege username row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.7 | ColumnhpSwitchLocalMgmtPwdUserAgingInterval | read-create | current | This object holds the user password aging value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.8 | ColumnhpSwitchLocalMgmtPwdUserPasswdLengthValue | read-create | current | This object holds length of local user password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.9 | ColumnhpSwitchLocalMgmtPrivUsernamePasswdSha256 | read-create | current | Storage location for the sha256 password associated with this Username. Always returns a NULL string. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.23 | TablehpSwitchRipIfAuthTable | not-accessible | current | This table supplements the RIP interface configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.23.1 | RowhpSwitchRipIfAuthEntry | not-accessible | current | RIP interface authentication configuration table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.1 | ColumnhpSwitchRipIfAuthChain | read-create | current | This object configures the KMS chain name for RIP interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.2 | ColumnhpSwitchRip2IfConfAuthKeyEncrypted | read-create | current | This object represents the encrypted format of the authentication key stored in the object rip2IfConfAuthKey. This object may only be read or written when hpSw… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.24 | TablehpSwitchAuthenPwdCompositionTable | not-accessible | current | This table lists different type of charaters required to create a password as per UCR guidelines. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.24.1 | RowhpSwitchAuthenPwdCompositionEntry | not-accessible | current | An Authentication Method Table Entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.1 | ColumnhpSwitchAuthenCompositionIndex | not-accessible | current | This object indicates the different types of charaters required to create a password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.2 | ColumnhpSwitchAuthenCompositionValue | read-write | current | This object indicates number of characters allow for password compostion |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25 | NodehpSwitchAuthenticationPasswordConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.1 | ScalarhpSwitchAuthPwdControlCheck | read-write | current | This object enables the password configuration feature. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.2 | ScalarhpSwitchAuthPwdUserNameCheck | read-write | current | This object enables the check to ensure that the password does not contain repeat or reverse characters of the associated username. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.3 | ScalarhpSwitchAuthPwdRepeatCharactersCheck | read-write | current | This object enables the check that the password does not contain at least three of the same characters used consecutively. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.4 | ScalarhpSwitchAuthPwdRepeatPasswordCheck | read-write | current | This object enables the check that the new password differs from the previous password by at least four characters. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.5 | ScalarhpSwitchAuthPwdAgingCheck | read-write | current | This object enables the check for the password expiry check. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.6 | ScalarhpSwitchAuthPwdLogonDetailsCheck | read-write | current | This object enables the previous login details. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.7 | ScalarhpSwitchAuthPwdAgingValue | read-write | current | This object provides the global aging value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.8 | ScalarhpSwitchAuthPwdHistoryCheck | read-write | current | This object enables the password history check. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.9 | ScalarhpSwitchAuthPwdHistoryRecordsRange | read-write | current | This object indicates the number of password history records. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.10 | ScalarhpSwitchAuthPwdAlertBeforeExpiry | read-write | current | This object indicates the period, in days, by which the user needs to be alerted before the password expiry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.11 | ScalarhpSwitchAuthPwdExpiredUserLoginDays | read-write | current | This object indicates the period, in days, for which the user will be allowed to login after password expiry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.12 | ScalarhpSwitchAuthPwdExpiredUserLoginAttempts | read-write | current | This object indicates the number of times the user will be allowed to login to the switch after the expiry of the password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.13 | ScalarhpSwitchAuthPwdUpdateInterval | read-write | current | This object indicates the minimum time, in hours, before which the user is not allowed to change the password. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.25.14 | ScalarhpSwitchAuthPwdCharPositionCheckValue | read-write | current | This object indicates the minimum like character position change expected from the previous password during password change.Setting 0 to this object will disab… |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26 | NodehpSwitchFrontPanelSecurity | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.1 | ScalarhpSwitchFpsPasswordClear | read-write | current | This object enables or disables the front panel security password clear command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.2 | ScalarhpSwitchFpsFactoryReset | read-write | current | This object enables or disables the front panel security factory reset command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.3 | ScalarhpSwitchFpsPasswordRecovery | read-write | current | This object enables or disables the front panel security password recovery command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.4 | ScalarhpSwitchFpsDiagnosticResetClearButton | read-write | current | This object enables or disables the front panel security diagnostic reset clear button command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.5 | ScalarhpSwitchFpsDiagnosticResetSerialConsole | read-write | current | This object enables or disables the front panel security diagnostic reset serial console command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.26.6 | ScalarhpSwitchFpsDisplayInConfig | read-write | current | This object enables or disables the front panel security display in config command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27 | TablehpSwitchAAAServerGroupNasTable | not-accessible | current | This table lists the RADIUS server groups with nas-id. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1 | RowhpSwitchAAAServerGroupNasEntry | not-accessible | current | RADIUS server group entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.1 | ColumnhpSwitchAAAServerGroupNasProtocolType | not-accessible | current | This part of the index indicates the protocol type for the server group. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.2 | ColumnhpSwitchAAAServerGroupNasIndex | not-accessible | current | This index indicates the server group in the AAA server group table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.3 | ColumnhpSwitchAAAServerGroupNasName | read-create | current | The name of a given AAA server group. The current maximum length is 12. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.4 | ColumnhpSwitchAAAServerGroupNasId | read-create | current | The NAS-ID for the RADIUS Server group. Maximum length is 32. |
| 1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.5 | ColumnhpSwitchAAAServerGroupNasStatus | read-create | current | The status of the AAA server group row. Supported values are createAndGo, destroy, and active. |