HP-ICF-BFD-MIB
29 objects
This MIB module contains HP proprietary extensions to the OSPF-MIB module.
Imported Objects
| BFD-STD-MIB MISSING | bfdObjects bfdSessEntry |
| BFD-TC-STD-MIB MISSING | BfdIntervalTC BfdMultiplierTC |
| HP-ICF-OID | hpSwitch |
| IANA-BFD-TC-STD-MIB | IANAbfdSessAuthenticationKeyTC IANAbfdSessAuthenticationTypeTC |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.120 | IdentityhpicfBfd | This MIB module contains HP proprietary extensions to the OSPF-MIB module. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1 | NodehpicfBfdObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1 | TablehpicfBfdSessConfigTable | not-accessible | current | A table of BFD session parameters |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1 | RowhpicfBfdSessConfigEntry | not-accessible | current | A set of objects used to configure BFD session parameters . |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.1 | ColumnhpicfBfdSessConfigIfIndex | not-accessible | current | The VLAN ifIndex value that uniquely identifies a row in the hpicf bfd session Table and corresponds to the VLAN on which the BFD session exist. |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.2 | ColumnhpicfBfdSessConfigDesiredMinTxInterval | read-write | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.3 | ColumnhpicfBfdSessConfigReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.4 | ColumnhpicfBfdSessConfigReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. Value must be zero(0)… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.5 | ColumnhpicfBfdSessConfigDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.6 | ColumnhpicfBfdSessConfigAuthPresFlag | read-create | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.7 | ColumnhpicfBfdSessConfigAuthenticationType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as ot… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.8 | ColumnhpicfBfdSessConfigAuthenticationKeyID | read-create | current | The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. The value -1 indicates that no Authentication… |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.9 | ColumnhpicfBfdSessConfigAuthenticationKey | read-create | current | The authentication key. When the hpicfBfdSessConfigAuthenticationType is simplePassword(1) and when the encryption is enabled on the switch, the value of this … |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.10 | ColumnhpicfBfdSessConfigAuthEncPwd | read-create | current | The authentication key. When the bfdSessAuthenticationType is simplePassword(1), the value of this object is the password present in the BFD packets. When the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.1.1.11 | ColumnhpicfBfdSessConfigRowStatus | read-create | current | The status of this BFD session config entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.2 | NodehpicfBfdScalarObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.2.1 | ScalarhpicfBfdEchoSrcIpAddType | read-write | current | The type of IP address used as source address for BFD echo packet |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.1.2.2 | ScalarhpicfBfdEchoSrcIpAdd | read-write | current | The IP address which is used as source address for BFD echo packet |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2 | NodehpicfBfdConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2.1 | NodehpicfBfdGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2.1.1 | GrouphpicfBfdSessGroup | current | Collection of objects needed for BFD sessions. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2.1.2 | GrouphpicfBfdScalarGroup | current | Collection of global parameters values needed for BFD instance. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2.2 | NodehpicfBfdCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.120.2.2.1 | CompliancehpicfBfdCompliance | current | Compliance statement for agents that provide full support for the BFD-MIB module. Such devices can then be monitored and also be configured using this MIB modu… | |
| 1.20.15.1.6 | TablehpicfBfdSessTable | not-accessible | current | HP extensions to the BfdSessTable (RFC 7331). |
| 1.20.15.1.6.1 | RowhpicfBfdSessEntry | not-accessible | current | HP extensions for an entry in the BfdSessTable. |
| 1.20.15.1.6.1.1 | ColumnhpicfBfdSessApplicationID | read-create | current | Name of application above BFD session. |
| 1.20.15.1.6.1.2 | ColumnhpicfBfdSessStaus | read-create | current | Nature of application above BFD session. |
| 1.20.15.1.6.1.3 | ColumnhpicfBfdSessClearStats | read-create | current | Flag to clear or not to clear statistics. |