HP-ICF-IP-ROUTING
135 objects
This MIB module contains HP proprietary objects for managing IP Routing.
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| IP-FORWARD-MIB | inetCidrRouteEntry ipCidrRouteEntry |
| IP-MIB | ipDefaultRouterEntry ipv6RouterAdvertEntry |
| OSPF-MIB | Metric |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.15 | IdentityhpicfIpRouting | This MIB module contains HP proprietary objects for managing IP Routing. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1 | NodehpicfIpRoutingObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1 | NodehpicfIcmpRdisc | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.1 | ScalarhpicfRdiscAdminStatus | read-write | current | The administrative status of the ICMP Router Discovery protocol. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2 | TablehpicfRdiscIfCfgTable | not-accessible | current | Per-interface configuration for the ICMP Router Discovery protocol. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1 | RowhpicfRdiscIfCfgEntry | not-accessible | current | Router discovery configuration information for a single interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.1 | ColumnhpicfRdiscIfAdminStatus | read-write | current | The administrative status of the ICMP Router Discovery protocol on this interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.2 | ColumnhpicfRdiscIfAdvertAddress | read-write | current | The destination address to be used for router advertisements on this interface. If the value of this object is 'multicast' (the default), router advertisements… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.3 | ColumnhpicfRdiscIfMaxAdvertInterval | read-write | current | The maximum time allowed between sending unsolicited Router Advertisements on this interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.4 | ColumnhpicfRdiscIfMinAdvertInterval | read-write | current | The minimum time allowed between sending unsolicited Router Advertisements on this interface. Must be no greater than hpicfRdiscMaxAdvertInterval. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.5 | ColumnhpicfRdiscIfAdvertLifetime | read-write | current | The value to be placed in the Lifetime field of Router Advertisements sent on this interface. Must be no less than hpicfRdiscMaxAdvertInterval. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.6 | ColumnhpicfRdiscIfPreference | read-write | current | The preference of the router as a default router, relative to the other routers on the same subnet. Higher values are more preferable. The minimum value (0x800… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2 | NodehpicfIcmpRateLimits | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1 | NodehpicfIcmpBoxLimits | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.1 | ScalarhpicfIcmpReplyLimitEnable | read-write | current | Enable/Disable ICMP replies. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.2 | ScalarhpicfIcmpReplyLimit | read-write | current | The maximum number of icmp replies to send per second. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.3 | ScalarhpicfIcmpRedirectEnable | read-write | current | Enable/Disable redirect error messages.. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.4 | ScalarhpicfIcmpDestUnreachEnable | read-write | current | Enable/Disable destination unreachable error messages. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.5 | ScalarhpicfIcmpAddrMaskReplyEnable | read-write | current | Enable/Disable address mask replies. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.6 | ScalarhpicfIcmpEchoBroadcastReplyEnable | read-write | current | Enable/Disable echo replies to directed broadcast echo requests.. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.3 | NodehpicfGlobalIpConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.1 | ScalarhpicfDBroadcastFwdEnable | read-write | current | Enable/disable directed broadcast forwarding. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.2 | ScalarhpicfSourceRouteEnable | read-write | current | Enable/disable source routed forwarding. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.3 | ScalarhpicfIpMaximumPaths | read-write | current | Maximum number of equal cost paths to a destination that we will add to the IP routing table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4 | NodehpicfIpStaticRouteConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1 | TablehpicfIpStaticRouteTable | not-accessible | current | Table of configured IP static routes. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static routes. Rows configur… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1 | RowhpicfIpStaticRouteEntry | not-accessible | current | A row in the static route table, containing information about a single configured static route. There are 3 legal cases for the indexing this table: 1. ((hpicf… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.1 | ColumnhpicfIpStaticRoutePrefixType | not-accessible | current | The type of destination prefix specified by this route. The value 'dns(16)' is not supported. This object specifies the type of destination address prefix in t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.2 | ColumnhpicfIpStaticRoutePrefix | not-accessible | current | The destination address prefix of this route. The type of address specified by this route is indicated by the corresponding instance of the hpicfIpStaticRouteP… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.3 | ColumnhpicfIpStaticRoutePrefixLength | not-accessible | current | This object indicates the number of leading one bits which form the mask to be logically ANDed with a destination address before comparison with the correspond… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.4 | ColumnhpicfIpStaticRouteFwdAddrType | not-accessible | current | The type of forwarding address for this route. The value of this object must be equal either to 'unknown' or to a value appropriate for the corresponding insta… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.5 | ColumnhpicfIpStaticRouteFwdAddr | not-accessible | current | For remote routes, the value of the next specified router to use for forwarding packets to the destination specified by this route. Note that this router does … |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.6 | ColumnhpicfIpStaticRouteFwdIfIndex | not-accessible | current | For remote routes, the value of this object must be zero. For reject or blackhole routes, the value of this object must be zero. For local routes, this object … |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.7 | ColumnhpicfIpStaticRouteType | read-create | current | The type of route. The value 'other' is not supported, and is included only for compatibility with the IP Forwarding Table MIB. The value 'local' indicates tha… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.8 | ColumnhpicfIpStaticRouteDistance | read-create | current | The administrative distance to associate with this static route. Routes with lower distances are preferred. By default, static routes are created with an admin… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.9 | ColumnhpicfIpStaticRouteTag | read-create | current | Tag value that can be used to filter redistribution of this route via route maps. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.10 | ColumnhpicfIpStaticRouteStatus | read-create | current | Status of this route entry. All writable columns in this table can be modified while the corresponding row is active. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.11 | ColumnhpicfIpStaticRouteMetric | read-create | current | Metric value for this route. It is used to compare static route with other static routes to the same destination. The acceptable range is from 1 to 255, both i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2 | TablehpicfIpStaticNeighborTable | not-accessible | current | Table of configured IP static neighbors. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static neighbors. Rows co… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1 | RowhpicfIpStaticNeighborEntry | not-accessible | current | A row in the static neighbor table, containing information about a single configured static neighbor. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.1 | ColumnhpicfIpStaticNeighborIfIndex | not-accessible | current | The ifIndex value for the interface used to reach this neighbor. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.2 | ColumnhpicfIpStaticNeighborNetAddrType | not-accessible | current | The type of network address specified by this entry. Only the values 'ipv4(1)' and 'ipv6(2)' are expected. This object specifies the type of neighbor network a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.3 | ColumnhpicfIpStaticNeighborNetAddress | not-accessible | current | The neighbor network address of this configured static neighbor. The type of address specified by this entry is indicated by the corresponding instance of the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.4 | ColumnhpicfIpStaticNeighborPhysAddress | read-create | current | The media-dependent physical address used to reach this neighbor. The size of this address depends on the media type of the interface identified by hpicfIpStat… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.5 | ColumnhpicfIpStaticNeighborStatus | read-create | current | Status of this neighbor entry. All writable columns in this table can be modified while the corresponding row is active. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5 | NodehpicfIpRouteStats | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1 | TablehpicfIpCidrRouteTable | not-accessible | current | HP extensions to the ipCidrRouteTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1 | RowhpicfIpCidrRouteEntry | not-accessible | current | Extended information about a single route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1.1 | ColumnhpicfIpCidrRouteDistance | read-only | current | The administrative distance of this route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2 | TablehpicfInetCidrRouteTable | not-accessible | current | HP extensions to the inetCidrRouteTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1 | RowhpicfInetCidrRouteEntry | not-accessible | current | Extended information about a single route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.1 | ColumnhpicfInetCidrRouteDistance | read-only | current | The administrative distance of this route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.2 | ColumnhpicfInetCidrRouteInfo | read-only | current | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.6 | NodehpicfArpInfo | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.6.1 | ScalarhpicfArpAgingTime | read-write | current | The timeout period in minutes for aging out an arp entry in the arp cache. Default value is 20 minutes. Allowable values for the HP implementation are 1-1440 a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.6.2 | ScalarhpicfArpMcastReplies | read-write | current | This object is used to enable/disable Multicast MAC support in all multicast modes. It will be disabled by default. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7 | NodehpicfIpDefaultRouterPrefixInfo | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1 | TablehpicfIpDefaultRouterPrefixTable | not-accessible | current | Table of default routers learnt through auto-config This Table will be used in conjunction of ipDefaultRouterTable defined in RFC 4293 to get the attributes of… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1 | RowhpicfIpDefaultRouterPrefixEntry | not-accessible | current | A row in the default router table, containing information about a single learnt default router |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.1 | ColumnhpicfIpDefaultRouterAddressType | not-accessible | current | The address type of the default router. The only supported type is IPV6 as of now |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.2 | ColumnhpicfIpDefaultRouterAddress | not-accessible | current | The address of the default router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.3 | ColumnhpicfIpDefaultRouterIfIndex | not-accessible | current | The address of the default router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.4 | ColumnhpicfIpDefaultRouterPrefixType | not-accessible | current | Type of the prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.5 | ColumnhpicfIpDefaultRouterPrefix | not-accessible | current | The prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.6 | ColumnhpicfIpDefaultRouterPrefixLength | not-accessible | current | Length of the prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.7 | ColumnhpicfIpDefaultRouterPrefixOnLink | read-only | current | The object has the value true (1) if the prefix can be used for on-link determination, otherwise the value is false(2) |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.8 | ColumnhpicfIpDefaultRouterPrefixAutonomous | read-only | current | The object has the value true(1) if this prefix can be used for autonomous address configuration. If the value is false(2), the prefix is not used to autoconfi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.9 | ColumnhpicfIpDefaultRouterPrefixValidLifeTime | read-only | current | The valid life time for the router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.10 | ColumnhpicfIpDefaultRouterPrefixPrefdLifeTime | read-only | current | The preferred life time for the router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.8 | NodehpicfIpDefaultRouterProperties | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1 | TablehpicfIpDefaultRouterTable | not-accessible | current | HP extensions to the ipDefaultRouterTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1 | RowhpicfIpDefaultRouterEntry | not-accessible | current | Extended information about a single route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.1 | ColumnhpicfIpDefaultRouterMTU | read-only | current | The link MTU size advertised by the router. The selected Mlink TU may be different from this one. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.2 | ColumnhpicfIpDefaultRouterHopLimit | read-only | current | The hop limit to be used by the host on outgoing packets. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9 | NodehpicfIpv6ND | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.1 | ScalarhpicfIpv6NDRAAdminStatus | read-write | current | A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2 | TablehpicfIpv6RtrAdvPrefixTable | not-accessible | current | This table describes the router advertisement configuration variables for each interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1 | RowhpicfIpv6RtrAdvPrefixEntry | not-accessible | current | An entry in the hpicfIpv6RtrAdvPrefixTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.1 | ColumnhpicfIpv6RtrAdvPrefixIfIndex | not-accessible | current | The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.2 | ColumnhpicfIpv6RtrAdvPrefixType | not-accessible | current | The address type of hpicfIpv6RtrAdvPrefixPrefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.3 | ColumnhpicfIpv6RtrAdvPrefixPrefix | not-accessible | current | The address prefix. The address type of this object is specified in hpicfIpv6RtrAdvPrefixType. The length of this object is the standard length for objects of … |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.4 | ColumnhpicfIpv6RtrAdvPrefixLength | not-accessible | current | The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.5 | ColumnhpicfIpv6RtrAdvPrefixOnLinkFlag | read-create | current | Router Advertisement messages are sent out with the On-Link flag (L-bit) field set to this value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.6 | ColumnhpicfIpv6RtrAdvPrefixAutonomousFlag | read-create | current | Autonomous address configuration flag. Router Advertisement messages are sent out with the autonomous flag field set to this value in the Prefix Information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.7 | ColumnhpicfIpv6RtrAdvPrefixLifetimeType | read-create | current | Specifies if the hpicfIpv6RtrAdvPrefixPreferredLifetime and hpicfIpv6RtrAdvPrefixValidLifetime are of the kind where consecutive advertisements have the same t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.8 | ColumnhpicfIpv6RtrAdvPrefixPreferredLifetime | read-create | current | The length of time ,in seconds,that this prefix will be preferred. A value of 4,294,967,295 represents infinity. The Router Advertisement messages are sent out… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.9 | ColumnhpicfIpv6RtrAdvPrefixValidLifetime | read-create | current | The length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The Rou… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.10 | ColumnhpicfIpv6RtrAdvPrefixRowStatus | read-create | current | The status of this conceptual row. As all objects in this conceptual row have default values a row can be created and made active by setting this object approp… |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.11 | ColumnhpicfIpv6RtrAdvPrefixAdvertiseFlag | read-create | current | Specifies whether the prefix in this entry is advertised or not.When set to TRUE prefix is advertised. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3 | TablehpicfIpv6RtrAdvTable | not-accessible | current | This table augments ipv6RouterAdvertEntry and it contains HP proprietary objects for managing router advertisements. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3.1 | RowhpicfIpv6RtrAdvEntry | not-accessible | current | An entry in the hpicfIpv6RtrAdvEntry contains Router Advertisement parameters. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3.1.1 | ColumnhpicfIpv6RtrAdvCurHopLimitMode | read-write | current | This object indicates whether the value in ipv6RouterAdvertCurHopLimit is in use or the value in ipv6IpDefaultHopLimit is in use for an entry in this table. A … |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.10 | NodehpicfIpRouteSummary | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1 | TablehpicfIpRouteSummaryTable | not-accessible | current | IP route summary table in global context. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1 | RowhpicfIpRouteEntry | not-accessible | current | IP route summary table information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1.1 | ColumnhpicfIpRouteProto | not-accessible | current | Protocol names that are enabled and active. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1.2 | ColumnhpicfIpRouteCnt | read-only | current | count of active routes per routing protocol. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2 | NodehpicfIpRoutingConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1 | NodehpicfIpRoutingGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.1 | GrouphpicfRdiscBaseGroup | current | Basic ICMP Router Discovery configuration objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.2 | GrouphpicfRdiscIfCfgGroup | current | A collection of objects allowing per-interface configuration of ICMP Router Discovery operation. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.3 | GrouphpicfIcmpReplyBaseGroup | current | A collection of objects allowing configuration of ICMP Redirect operation. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.4 | GrouphpicfIcmpReplyLimitGroup | current | A collection of objects allowing configuration of ICMP Reply rate limiting. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.5 | GrouphpicfIpRouteCfgGroup | current | A collection of objects allowing configuration of IP global enables. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.6 | GrouphpicfIpStaticRouteGroup | current | A collection of objects for configuring IP static routes. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.7 | GrouphpicfIpStaticNeighborGroup | current | A collection of objects for configuring IP static neighbors. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.8 | GrouphpicfIpCidrRouteGroup | current | A collection of objects for retrieving extended information about routes in the routing table. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.9 | GrouphpicfInetCidrRouteGroup | current | A collection of objects for retrieving extended information about routes in the routing table. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.10 | GrouphpicfArpBaseGroup | current | Basic ARP (address resolution protocol) configuration objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.11 | GrouphpicfIpv6RtrAdvPrefixGroup | current | The group of objects in a table for configuring the Router Advertisement options. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.12 | GrouphpicfIpv6RtrAdvGroup | current | The group of objects in a table for configuring the Router Advertisement options. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.13 | GrouphpicfGlobalIpConfigGroup | current | The group of objects in a table hp BSD broadcast forwarding enable/disable flags. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.14 | GrouphpicfIpDefaultRouterGroup | current | The group of objects in a table for default routing. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.15 | GrouphpicfIpv6NDRAAdminGroup | current | This group member is used to enable / disable IPV6 neighbor discovery router advertisement global admin status. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.16 | GrouphpicfIpRouteBaseScalarsGroup | current | This group contains both number of routing entries and number next hobs specified as part of routing table. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.17 | GrouphpicfIpStaticRouteOtherGroup | current | The group of objects for configuring IP static routes. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.18 | GrouphpicfIpRouteSummaryTableGroup | current | This group contains the count of active routes for each routing protocol. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2 | NodehpicfIpRoutingCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.1 | CompliancehpicfIcmpRdiscCompliance | current | The compliance statement for HP Routing switches that support ICMP Router Discovery. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.2 | CompliancehpicfIcmpReplyCompliance | current | The compliance statement for HP Routing switches that support ICMP Reply Limiting. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.3 | CompliancehpicfIpRouterCompliance | current | The compliance statement for HP Routing switches. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.4 | CompliancehpicfArpInfoCompliance | current | The compliance statement for HP Routing switches that support ARP. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.5 | CompliancehpicfIpv6RtrAdvPrefixCompliance | current | The compliance statement for HP Routing switches that support Router Advertisements | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.6 | CompliancehpicfIpv6RtrAdvCompliance | current | The compliance statement for HP Routing switches that support Router Advertisements | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.7 | CompliancehpicfGlobalIpConfigCompliance | current | The compliance statement for HP Routing switches that support Router Advertisements. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.8 | CompliancehpicfIpDefaultRouterCompliance | current | The compliance statement for HP Routing switches that support Router Advertisements. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.9 | CompliancehpicfIpv6NDRAAdminCompliance | current | IPV6 neighbor discovery router advertisement global admin status. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.10 | CompliancehpicfIpRouteBaseScalarsCompliance | current | This group contains both number of routing entries and number next hobs specified as part of routing table. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.11 | CompliancehpicfInetCidrRouteCompliance | current | A collection of objects for retrieving extended information about routes in the routing table. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.12 | CompliancehpicfIpRouterOtherCompliance | current | The compliance statement for HP Routing switches. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.13 | CompliancehpicfIpRouteSummaryCompliance | current | A collection of objects for active routes. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.3 | NodehpicfIpRouteBaseScalars | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.15.3.1 | ScalarhpicfIpRouteCount | read-only | current | This parameter specifies total number of routes in the Routing table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.15.3.2 | ScalarhpicfIpRouteNextHopCount | read-only | current | This parameter specifies total number of next-hop entries in the Routing table. This parameter is useful to know how many other routers are connected and actin… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpicfIpRouteProtoName | INTEGER { connected(1), ipv6(7),ospf2ase(8), rip(9),bgp(10),rdisc6(11),static(12), snmp(13),isis(15), ripng(17),ipv4(18), pim(22),rdisc(23),ospf2(24), ospf2nssa(25),mroute(27), igmpv3(32),pim6(33), mpls(40),vrrp2(42) } | current | An enumerated value which indicates the protocol name for show IP route summary. |