HP-ICF-IPCONFIG
94 objects
This MIB module describes objects for basic IP address configuration and interface configuration for devices in the HP Integrated Communication Facility product line.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.10 | IdentityhpicfIpConfig | This MIB module describes objects for basic IP address configuration and interface configuration for devices in the HP Integrated Communication Facility produc… | ||
| 1.3.6.1.4.1.11.2.14.11.1.10.1 | NodehpicfIpConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1 | NodehpicfIpAddressObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1 | TablehpicfIpAddressTable | not-accessible | current | This table contains manually configured IPv4 and IPv6 addresses for each interface. An entry in this table may not exist in the active state unless all objects… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1 | RowhpicfIpAddressEntry | not-accessible | current | An entry in the hpicfIpAddressEntry contains a single manually configured IP address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.1 | ColumnhpicfIpAddressAddrType | not-accessible | current | Type of IP address |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.2 | ColumnhpicfIpAddressAddr | not-accessible | current | The IP address to which this entry's addressing information pertains. hpicfIpAddressAddr is always interpreted within the context of hpicfIpAddressAddrType. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.3 | ColumnhpicfIpAddressPrefixLength | read-create | current | The prefix length associated with IP address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.4 | ColumnhpicfIpAddressType | read-create | current | IP address type. For V4 addresses the value will be unicast. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.5 | ColumnhpicfIpAddressRowStatus | read-create | current | The status of the IP address entry. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.6 | ColumnhpicfIpAddressExtendedType | read-create | current | IP address type. For V4 addresses the value will be none. For V6 address it can be eui64 and linkLocal also. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2 | TablehpicfSwitchIpAddressTable | not-accessible | current | This read only table contains IPV4 and/or IPV6 addresses for each interface. These IP Addresses are either manually configured or obtained by a dynamic method … |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1 | RowhpicfSwitchIpAddressEntry | not-accessible | current | An entry in the hpicfSwitchIpAddressEntry contains a single IP address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.1 | ColumnhpicfSwitchIpAddressAddrType | not-accessible | current | Type of IP address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.2 | ColumnhpicfSwitchIpAddressAddr | not-accessible | current | The IP address to which this entry's addressing information pertains. hpicfSwitchIpAddressAddr is always interpreted within the context of hpicfSwitchIpAddress… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.3 | ColumnhpicfSwitchIpAddressPrefixLength | read-only | current | The prefix length associated with IP address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.4 | ColumnhpicfSwitchIpAddressType | read-only | current | IP address type. For V4 addresses the value will be unicast. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.5 | ColumnhpicfSwitchIpAddressOrigin | read-only | current | The origin of the address. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.6 | ColumnhpicfSwitchIpAddressStatus | read-only | current | The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1). |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.7 | ColumnhpicfSwitchIpAddressPreferredLifetime | read-only | current | The remaining length of time in seconds that this address will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infin… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.8 | ColumnhpicfSwitchIpAddressValidLifetime | read-only | current | The remaining length of time, in seconds, that this address will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infini… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.9 | ColumnhpicfSwitchIpAddressExtendedType | read-only | current | IP address type. For V4 addresses the value will be none. For V6 address it can be eui64 and linkLocal also. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.3 | TablehpicfIpNetToPhysicalTable | not-accessible | current | This table augments ipNeTtoPhysicalTable |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.3.1 | RowhpicfIpNetToPhysicalEntry | not-accessible | current | This table augments ipNeTtoPhysicalTable |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.3.1.1 | ColumnhpicfIpNetToPhysicalPort | read-create | current | This object gives the port through which the physical address was learnt |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.1.4 | ScalarhpicfIpNetToPhysicalTableClear | read-write | current | This provides the clear options for hpicfIpNetToPhysicalTable. A value of 2 is to clear arp table. A value of 3 is to clear the ipv6 neighbor table. A get retu… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2 | NodehpicfIpv4InterfaceObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1 | TablehpicfIpv4InterfaceTable | not-accessible | current | This table contains per-interface IPV4 configuration information. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1 | RowhpicfIpv4InterfaceEntry | not-accessible | current | An entry in the hpicfIpv4InterfaceEntry contains IPV4 interface specific configuration information. This table is indexed by ipv4InterfaceIfIndex. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1 | ColumnhpicfIpv4InterfaceDhcpEnable | read-write | current | Changing this flag to 'full' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) … |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.2 | ColumnhpicfIpv4InterfaceForwarding | read-write | current | This flag indicates whether this interface is forwarding the datagrams that were not addressed to this interface. Setting this flag to 'enabled' (the default) … |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.3 | ColumnhpicfIpv4InterfaceProxyArp | read-write | current | Enables/disables ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses from other subnets. If set to disable… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.4 | ColumnhpicfIpv4InterfaceLocalProxyArp | read-write | current | Enables/disables local ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses within the local subnet. If set… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.5 | ColumnhpicfIpv4InterfaceBootpGateway | read-write | current | This entry will specify the IP address to be used as the BOOTP gateway for this interface. Note that this IP address will be used as the BOOTP gateway only whe… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.6 | ColumnhpicfIpv4InterfaceDirectedBcastFwd | read-write | current | Enable/disable directed-broadcast forwarding on this interface. When set to default, the global hpicfDBroadcastFwdEnable setting is used. When set to enable, d… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.3 | TablehpicfUdpTunnelTable | not-accessible | current | This table contains per interface IPV4 Udp encapsulated tunnel specific configuration information. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1 | RowhpicfUdpTunnelEntry | not-accessible | current | An entry in the hpicfUdpTunnelEntry contains Udp encapsulated tunnel specific configuration information. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.1 | ColumnhpicfUdpTunnelSrcPort | read-create | current | This variable is valid only for the remote mirroring source or destination switch. The value will be ignored otherwise. A value of 0 means that the UDP port is… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.2 | ColumnhpicfUdpTunnelMirrorSessionID | read-create | current | This variable is valid only for a remote mirroring switch which interfaces with the source end of the tunnel. The value will be ignored otherwise. A value of 0… |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.3 | ColumnhpicfUdpTunnelMirrorTruncate | read-write | current | Enables/disables truncation for remote mirroring. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.3 | NodehpicfIpClientTrackerObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.1.3.1 | ScalarhpicfIpClientTrackerEnable | read-write | current | Enable ip client tracking for trusted and untrusted devices. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.3.2 | ScalarhpicfIpClientTrackerTrusted | read-write | current | Enable ip client tracking for trusted devices. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.3.3 | ScalarhpicfIpClientTrackerUntrusted | read-write | current | Enable ip client tracking for untrusted devices. |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.3.4 | ScalarhpicfIpClientTrackerProbeDelay | read-write | current | This object specifies ARP probe delay time in seconds for IP client-tracker. When the object value is set to '0', IP client-tracker probe-delay is disabled. By… |
| 1.3.6.1.4.1.11.2.14.11.1.10.2 | NodehpicfIpConfigConformance | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1 | NodehpicfIpConfigCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.1 | CompliancehpicfIpConfigCompliance | read-write | deprecated | A compliance statement for HP Routing switches with IP Configuration |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.2 | CompliancehpicfIpConfigCompliance2 | read-write | current | A compliance statement for HP Routing switches with IP Configuration |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.4 | CompliancehpicfIpConfigCompliance4 | read-write | current | A compliance statement for HP Routing switches with IP Configuration |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.5 | CompliancehpicfIpConfigCompliance5 | current | A compliance statement for HP Routing switches with IP Configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.6 | CompliancehpicfIpConfigCompliance6 | current | A compliance statement for HP Routing switches with IP Configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.7 | CompliancehpicfIpConfigCompliance7 | current | A compliance statement for HP Routing switches with IP Configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.8 | CompliancehpicfIpConfigCompliance8 | current | A compliance statement for HP Routing switches with IP Configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.9 | CompliancehpicfIpConfigCompliance9 | read-write | current | A compliance statement for HP Routing switches with IP Configuration |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.10 | CompliancehpicfIpConfigCompliance10 | deprecated | A compliance statement for IP Client tracking | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.11 | CompliancehpicfIpConfigCompliance11 | deprecated | A compliance statement for IP Client tracking | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.1.13 | CompliancehpicfIpConfigCompliance13 | current | A compliance statement for IP Client tracking | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2 | NodehpicfIpConfigGroups | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.1 | GrouphpicfIpAddressTableGroup | current | A Collection of objects allowing configuration of an IP address for an interface. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.2 | GrouphpicfSwitchIpAddressTableGroup | current | A Collection of objects providing interfaces addressing information. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.3 | GrouphpicfIpv4InterfaceTableGroup | deprecated | Deprecated - see hpicfIpv4InterfaceTableGroup2 | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.4 | GrouphpicfUdpTunnelTableGroup | current | A Collection of objects that allows IPV4 interface configuration for remote mirroring | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.5 | GrouphpicfIpv6InterfaceTableGroup | current | A Collection of objects that allows IPV6 interface configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.6 | GrouphpicfIpv4InterfaceTableGroup2 | current | A Collection of objects that allows IPV4 interface configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.7 | GrouphpicfIpv6DadAttemptsGroup | current | A collection of objects that allows the number of DAD Attempts to be configured globally and also on a per interface basis. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.8 | GrouphpicfIpv6IcmpGroup | current | Objects provided for the ipv6 icmp configuration. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.9 | GrouphpicfIpNetToPhysicalTableGroup | current | Objects provided for the clear options in the device. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.10 | GrouphpicfUdpTunnelMirrorGroup | current | An object that enables or disables truncation for remote mirroring. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.11 | GrouphpicfIpv6NDGroup | current | Objects provided for configuration of ipv6 ND parameters | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.12 | GrouphpicfIpv4InterfaceTableGroup3 | current | A Collection of objects that allows IPV4 interface configuration | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.13 | GrouphpicfIpClientTrackerGroup | deprecated | Deprecated - see hpicfIpClientTrackerGroup2 | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.14 | GrouphpicfIpClientTrackerGroup2 | deprecated | A Collection of objects that allows IpClient Tracking Depricated - see hpicfIpClientTrackerGroup3. | |
| 1.3.6.1.4.1.11.2.14.11.1.10.2.2.16 | GrouphpicfIpClientTrackerGroup3 | current | A Collection of objects that allows IpClient Tracking | |
| 1.3.6.1.4.1.11.2.14.11.1.10.3 | NodehpicfIpv6ConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1 | NodehpicfIpv6GlobalConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1.1 | NodehpicfIpv6NDObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1.1.1 | ScalarhpicfIpv6NDDadAttempts | read-write | current | The value in this object indicates the maximum number of neighbor solicitation requests that will be sent while performing duplicate address detection. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1.2 | NodehpicfIpv6IcmpObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1.2.1 | ScalarhpicfIpv6IcmpErrorInterval | read-write | current | The value in this object indicates the error interval in which the token bucket algorithm places one token in the bucket for ICMPV6 rate limiting.Each token re… |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.1.2.2 | ScalarhpicfIpv6IcmpBucketsize | read-write | current | The value in this object indicates the maximum number of tokens that can be in the bucket. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2 | NodehpicfIpv6InterfaceObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1 | TablehpicfIpv6InterfaceTable | not-accessible | current | This table contains per-interface IPV6 configuration information. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1 | RowhpicfIpv6InterfaceEntry | not-accessible | current | An entry in the hpicfIpv6InterfaceEntry contains IPV6 interface specific configuration information. This table is indexed by ipv6InterfaceIfIndex. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1 | ColumnhpicfIpv6InterfaceDhcpMode | read-write | current | Setting this flag to 'dhcpFull' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHC… |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.2 | ColumnhpicfIpv6InterfaceManual | read-write | current | Setting this flag to 'enabled' will allow manual IP address configuration but disallow any DHCP configuration. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.3 | ColumnhpicfIpv6InterfaceAutoConfig | read-write | current | Setting this flag to 'enabled' will allow host to configure automatically from default router. There may be multiple routers and in that scenario switch will a… |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.4 | ColumnhpicfIpv6InterfaceDhcpRapidCommit | read-write | current | Setting this flag to 'enabled' will allow the host to get address and configuration information from the dhcp server rapidly. This flag can be enabled only if … |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.5 | ColumnhpicfIpv6InterfaceDhcpRelay | read-write | current | This flag indicates whether this interface is dhcp-relay enabled. By default this flag is set to disabled. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6 | ColumnhpicfIpv6InterfaceCfgEnableStatus | read-write | current | The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. Setting this object to up(1) will enable ipv6 for the given interface.Sett… |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.7 | ColumnhpicfIpv6InterfaceDadAttempts | read-write | current | This object indicates the maximum number of neighbor solicitation requests that will be sent while performing duplicate address detection for this interface. N… |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.8 | ColumnhpicfIpv6InterfaceDadAttemptsMode | read-write | current | This object indicates whether the value in hpicfIpv6NDDadAttempts is in use or the value in hpicfIpv6InterfaceDadAttempts is in use for an entry in this table … |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.9 | ColumnhpicfIpv6InterfaceReachableTime | read-write | current | The time a neighbor is considered reachable after receiving a reachability confirmation. |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.10 | ColumnhpicfIpv6InterfaceRetransmitTime | read-write | current | The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. |