HP-ICF-POE-MIB
39 objects
This MIB module describes management objects used to manage Power Source Equipment (PSE).
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| HP-ICF-OID | hpicfCommon |
| POWER-ETHERNET-MIB | pethPsePortEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.9 | NodehpicfPOE | |||
| 1.3.6.1.4.1.11.2.14.11.1.9.1 | IdentityhpicfPoe | This MIB module describes management objects used to manage Power Source Equipment (PSE). | ||
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1 | TablehpicfPoePethPsePortTable | not-accessible | current | This table supplements the table 'pethPsePortTable' in ieee802af.mib. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1 | RowhpicfPoePethPsePortEntry | not-accessible | current | The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1 | ColumnhpicfPoePethPsePortCurrent | read-only | current | This field specifies the current supplied at this port. This value is specified in milli amperes(mA). |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2 | ColumnhpicfPoePethPsePortVoltage | read-only | current | This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV) |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3 | ColumnhpicfPoePethPsePortPower | read-only | current | This field specifies the Power supplied at this port. This value is specified in milliwatts (mW). |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4 | ColumnhpicfPoePethPsePortPowerAllocateBy | read-write | current | This field specifies the power allocation method for this port. The default value is usage. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5 | ColumnhpicfPoePethPsePortPowerValue | read-write | current | This field specifies the power allocation defined for this port. This value is specified in Watts (W). |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6 | ColumnhpicfPoePethPsePortLLDPDetect | read-write | current | This field specifies if power should be allocated using LLDP advertised information regarding the PD. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7 | ColumnhpicfPoePethPsePortPoePlusPowerValue | read-write | current | This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8 | ColumnhpicfPoePethPsePortActualPower | read-only | current | This field specifies the actual power drained by the device connected to this port. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2 | NodehpicfPoeConformance | |||
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1 | NodehpicfPoeCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.1 | CompliancehpicfPoeCompliance | deprecated | A compliance statement for HP Routing switches with PoE capability | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.2 | CompliancehpicfPoeCompliance1 | deprecated | A compliance statement for HP Routing switches with PoE capability | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.3 | CompliancehpicfPoeCompliance2 | current | A compliance statement for HP Routing switches with PoE capability | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2 | NodehpicfPoeGroups | |||
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.1 | GrouphpicfPoePethPsePortTableGroup | current | A collection of objects allowing configuration of PoE PSE Port table | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.2 | GrouphpicfPoeGlobalGroup | deprecated | A collection of objects related to the global configuration of POE on a given chassis. | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.3 | GrouphpicfPseFeaturesGroup | current | A Collection of Object(s) that provide information about each power source equipment instance. | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.4 | GrouphpicfPoePowerSupplyGroup | current | A collection of objects related to Power Supply. | |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.3 | ScalarhpicfPoeAllowPreStdDetect | read-write | deprecated | This object is used to configure the default POE power detection mode. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - … |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.4 | ScalarhpicfPoePowerRedundancy | read-write | deprecated | This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A valu… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.5 | ScalarhpicfPoeExtPwrSupplyCount | read-write | deprecated | This object is used to configure the number of external power supplies expected to be connected to the chassis. The default value is 1. In a stack, this value … |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6 | TablehpicfPseFeaturesTable | not-accessible | current | This table describes the features of each power source equipment (PSE). On standalone switches (both stackable and chassis switches) there shall be only one en… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1 | RowhpicfPseFeaturesEntry | not-accessible | current | A row in the PSE features table, signifying a single power source equipment. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1 | ColumnhpicfPseAllowPreStdDetect | read-write | current | This object is used to configure the default POE power detection mode for this power source equipment. A value of TRUE - indicates that power pre-802.3af-stand… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2 | ColumnhpicfPsePowerRedundancy | read-write | current | This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allo… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3 | ColumnhpicfPseExtPwrSupplyCount | read-write | current | This object is used to configure the number of external power supplies expected to be connected to the Power Source Equipment. The default value is 1. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4 | ColumnhpicfPseAvailablePower | read-only | current | This field specifies the total power available on this Power source equipment. This includes internal and external power supplies. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5 | ColumnhpicfPseUsedPower | read-only | current | This field specifies the total power allocated on the Power Source Equipment. This is the sum of the power allocated to all the ports on the PSE. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6 | ColumnhpicfPseFailoverPower | read-only | current | This field specifies the failover power for this Power Source Equipment. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7 | ColumnhpicfPseRedundantPower | read-only | current | This field specifies the redundancy POE power available to the Power Source Equipment. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.7 | TablehpicfPoePowerSupplyTable | not-accessible | current | This table contains one row per power supply available to the switch. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1 | RowhpicfPoePowerSupplyEntry | not-accessible | current | Information about a particular power supply. Each entry provides information about power supply whether it is external or internal, if it is poe/poePlus and th… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1 | ColumnhpicfPoePowerSupplySourceType | read-only | current | This field specifies whether the power supply is external or internal. Stackable switch has inbuilt power supply and can have upto 1 external power supply. Cha… |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2 | ColumnhpicfPoePowerSupplyType | read-only | current | This field specifies the type of the power supply, poe or poePlus. |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3 | ColumnhpicfPoePowerSupplyCapacity | read-only | current | This field specifies the capacity of the power supply. |