HP-ICF-VG-RPTR
72 objects
This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB.
Imported Objects
| HP-ICF-OID | hpicfObjectModules hpicfVg hpicfVgRptrTrapsPrefix |
| ICF-VG-RPTR | icfVgPortStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.11 | IdentityhpicfVgRptrMib | clauses | This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1 | NodehpicfVgRptrConformance | |||
| 1.3.6.1.4.1.11.2.14.10.2.11.1.1 | NodehpicfVgRptrCompliances | |||
| 1.3.6.1.4.1.11.2.14.10.2.11.1.1.1 | CompliancehpicfVgRptrPreDot12Compliance | obsolete | ********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for pre-standard HP 100VG repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.1.2 | CompliancehpicfVgRptrCompliance | current | The compliance statement for HP 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2 | NodehpicfVgRptrGroups | |||
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.1 | GrouphpicfVgRptrPreDot12BasicGroup | obsolete | ********* THIS GROUP IS OBSOLETE ********* HP specific extensions to the 802.12 Repeater MIB providing status and configuration of pre-standard 802.12 repeater… | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.2 | GrouphpicfVgRptrBasicGroup | current | HP specific extensions to the 802.12 Repeater MIB providing status and configuration of 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.3 | GrouphpicfVgRptrPreDot12MonitorGroup | obsolete | ********* THIS GROUP IS OBSOLETE ********* HP specific extensions to the 802.12 Repeater MIB providing global counters for pre-standard 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.4 | GrouphpicfVgRptrMonitorGroup | current | HP specific extensions to the 802.12 Repeater MIB providing global counters for 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.5 | GrouphpicfVgRptrXcvrGroup | current | A collection of objects for configuring and monitoring tranceivers on 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.6 | GrouphpicfVgRptrRedundantUplinkGroup | current | A collection of objects for configuring redundant uplinks on 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.7 | GrouphpicfVgRptrBasicTraps | current | A collection of notifications used to indicate port status changes on 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.11.1.2.8 | GrouphpicfVgRptrRedundantUplinkTraps | current | A collection of notifications used to indicate status changes on the redundant uplinks on 802.12 repeaters. | |
| 1.3.6.1.4.1.11.2.14.11.3.1 | NodehpVgBasic | |||
| 1.3.6.1.4.1.11.2.14.11.3.1.1 | NodehpVgBasicGlobal | |||
| 1.3.6.1.4.1.11.2.14.11.3.1.1.1 | ScalarhpVgEntityName | read-only | current | The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this … |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.2 | ScalarhpVgRedundantUpLinksFlag | read-write | current | This object is used to indicate that the hub is configured with redundant uplink ports. |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3 | TablehpVgXcvrTable | not-accessible | current | A table containing information about transceivers. All uplink, downlink, and redundent links are represented in this table |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1 | RowhpVgXcvrEntry | not-accessible | current | An entry in the transceiver table |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.1 | ColumnhpVgXcvrGroupIndex | not-accessible | current | The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex. |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.2 | ColumnhpVgXcvrIndex | not-accessible | current | The transceiver within the group for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.3 | ColumnhpVgXcvrType | read-only | current | The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not a… |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.4 | ColumnhpVgXcvrAssociatedPort | read-write | current | The port within the group that this transceiver is associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may b… |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.5 | ColumnhpVgXcvrState | read-only | current | This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selec… |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.6 | ColumnhpVgXcvrAbandonments | read-only | current | The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have th… |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.7 | ColumnhpVgXcvrIsMovable | read-only | current | A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can o… |
| 1.3.6.1.4.1.11.2.14.11.3.1.1.4 | ScalarhpVgNullAddrTraining | read-write | current | This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to … |
| 1.3.6.1.4.1.11.2.14.11.3.1.2 | NodehpVgBasicGroup | |||
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1 | TablehpVgBasicGroupTable | not-accessible | current | HP specific extensions to the vgBasicGroupTable. |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1 | RowhpVgBasicGroupEntry | not-accessible | current | An entry in the table, containing HP extensions for a specific group. |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1 | ColumnhpVgGrpGroupIndex | not-accessible | current | The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex. |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2 | ColumnhpVgGrpPortsAdminStatus | read-only | current | The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each … |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3 | ColumnhpVgGrpPortsTrained | read-only | current | The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the… |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4 | ColumnhpVgGrpPortsInTraining | read-only | current | The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port w… |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5 | ColumnhpVgGrpPortsCascaded | read-only | current | The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port… |
| 1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6 | ColumnhpVgGrpPortsPromiscuous | read-only | current | The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each po… |
| 1.3.6.1.4.1.11.2.14.11.3.1.3 | NodehpVgBasicPort | |||
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1 | TablehpVgBasicPortTable | not-accessible | current | HP specific extensions to the vg port table. |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1 | RowhpVgBasicPortEntry | not-accessible | current | HP extended information about a specific vg port. |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1 | ColumnhpVgPortGroupIndex | not-accessible | current | The group that contains the port for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2 | ColumnhpVgPortIndex | not-accessible | current | The port within the group for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3 | ColumnhpVgPortPolarityReversed | read-only | current | This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to… |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4 | ColumnhpVgPortWireSkewError | read-only | current | This object is used to indicate that a wire skew error has been detected on this port. |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.5 | ColumnhpVgPortAssociatedXcvrIndex | read-write | current | This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object will … |
| 1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.6 | ColumnhpVgPortNumAssociatedXcvrs | read-only | current | This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable. |
| 1.3.6.1.4.1.11.2.14.11.3.2 | NodehpVgMonitor | |||
| 1.3.6.1.4.1.11.2.14.11.3.2.1 | NodehpVgMonitorGlobal | |||
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1 | NodehpVgMonCounters | |||
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.1 | ScalarhpVgMonGlbReadableFrames | read-only | current | This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of th… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.2 | ScalarhpVgMonGlbReadableOctets | read-only | current | This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summat… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.3 | ScalarhpVgMonGlbUnreadableOctets | read-only | current | This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the sum… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.4 | ScalarhpVgMonGlbHighPriorityFrames | read-only | current | This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the va… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.5 | ScalarhpVgMonGlbHighPriorityOctets | read-only | current | This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.6 | ScalarhpVgMonGlbBroadcastFrames | read-only | current | This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the value… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.7 | ScalarhpVgMonGlbMulticastFrames | read-only | current | This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the value… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.8 | ScalarhpVgMonGlbIPMFrames | read-only | current | This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a sum… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.9 | ScalarhpVgMonGlbDataErrorFrames | read-only | current | This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPort… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.10 | ScalarhpVgMonGlbPriorityPromotions | read-only | current | This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the v… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.11 | ScalarhpVgMonGlbHCReadableOctets | read-only | current | This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summat… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.12 | ScalarhpVgMonGlbHCUnreadableOctets | read-only | current | This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the sum… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.13 | ScalarhpVgMonGlbHCHighPriorityOctets | read-only | current | This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.14 | ScalarhpVgMonGlbHCNormPriorityOctets | read-only | current | This object is a count of the total number of octets contained in normal priority frames that have been received on all ports of this repeater. This counter is… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.15 | ScalarhpVgMonGlbNormPriorityFrames | read-only | current | This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the i… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.16 | ScalarhpVgMonGlbNormPriorityOctets | read-only | current | This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the i… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.17 | ScalarhpVgMonGlbNullAddressedFrames | read-only | current | This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icf… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.18 | ScalarhpVgMonGlbOversizeFrames | read-only | current | This object is a count of the total number of oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPort… |
| 1.3.6.1.4.1.11.2.14.11.3.2.1.1.19 | ScalarhpVgMonGlbTransitionToTrainings | read-only | current | This object is a count of the total number of transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrain… |
| 1.3.6.1.4.1.11.2.14.11.3.2.2 | NodehpVgMonitorGroup | |||
| 1.3.6.1.4.1.11.2.14.11.3.2.3 | NodehpVgMonitorPort | |||
| 1.3.6.1.4.1.11.2.14.12.3.0.1 | NotificationhpVgRedundantUplinkTrap | current | An hpVgRedundantUplinkTrap is sent anytime one of the tranceivers being used in a redundant uplink transitions from one of the 'unknown', 'inUse' or 'standby' … | |
| 1.3.6.1.4.1.11.2.14.12.3.0.2 | NotificationhpVgLossOfActiveTrap | current | An hpVgLossOfActiveTrap is sent whenever an enabled port transitions from the active state to either the inactive or training state. The new value of the port'… |