HP-SN-MPLS-LSR-MIB
113 objects
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001.
Imported Objects
| HP-SN-MPLS-TC-MIB | MplsBitRate MplsBurstSize MplsInitialCreationSource MplsLabel MplsLSPID mplsMIB |
| HP-SN-ROOT-MIB | snMpls |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2 | IdentitymplsLsrMIB | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Mult… | ||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1 | NodemplsLsrObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1 | TablemplsInterfaceConfTable | not-accessible | current | This table specifies per-interface MPLS capability and associated information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1 | RowmplsInterfaceConfEntry | not-accessible | current | An entry in this table is created by an LSR for every interface capable of supporting MPLS. Each entry in this table will exist only if a corresponding entry i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1 | ColumnmplsInterfaceConfIndex | not-accessible | current | This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2 | ColumnmplsInterfaceLabelMinIn | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3 | ColumnmplsInterfaceLabelMaxIn | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4 | ColumnmplsInterfaceLabelMinOut | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5 | ColumnmplsInterfaceLabelMaxOut | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6 | ColumnmplsInterfaceTotalBandwidth | read-only | current | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable whe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7 | ColumnmplsInterfaceAvailableBandwidth | read-only | current | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculat… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8 | ColumnmplsInterfaceLabelParticipationType | read-only | current | Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2 | TablemplsInterfacePerfTable | not-accessible | current | This table provides MPLS performance information on a per-interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1 | RowmplsInterfacePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1 | ColumnmplsInterfaceInLabelsUsed | read-only | current | This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2 | ColumnmplsInterfaceFailedLabelLookup | read-only | current | This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross- connect entr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3 | ColumnmplsInterfaceOutLabelsUsed | read-only | current | This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4 | ColumnmplsInterfaceOutFragments | read-only | current | This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-inter… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3 | TablemplsInSegmentTable | not-accessible | current | This table contains a collection of incoming segments to an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1 | RowmplsInSegmentEntry | not-accessible | current | An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1 | ColumnmplsInSegmentIfIndex | not-accessible | current | This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero repre… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2 | ColumnmplsInSegmentLabel | not-accessible | current | The incoming label for this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3 | ColumnmplsInSegmentNPop | read-create | current | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4 | ColumnmplsInSegmentAddrFamily | read-create | current | The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. This object can… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5 | ColumnmplsInSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6 | ColumnmplsInSegmentOwner | read-create | current | Denotes the entity that created and is responsible for managing this segment. This object cannot be modified if mplsInSegmentRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7 | ColumnmplsInSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8 | ColumnmplsInSegmentRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9 | ColumnmplsInSegmentStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsInSegmentRowStatus is active(1). If this variable is set to rea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4 | TablemplsInSegmentPerfTable | not-accessible | current | This table contains statistical information for incoming MPLS segments to an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1 | RowmplsInSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1 | ColumnmplsInSegmentOctets | read-only | current | This value represents the total number of octets received by this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2 | ColumnmplsInSegmentPackets | read-only | current | Total number of packets received by this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3 | ColumnmplsInSegmentErrors | read-only | current | The number of errored packets received on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4 | ColumnmplsInSegmentDiscards | read-only | current | The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being tr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5 | ColumnmplsInSegmentHCOctets | read-only | current | The total number of octets received. This is the 64 bit version of mplsInSegmentOctets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6 | ColumnmplsInSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5 | ScalarmplsOutSegmentIndexNext | read-only | current | This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigne… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6 | TablemplsOutSegmentTable | not-accessible | current | This table contains a representation of the outgoing segments from an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1 | RowmplsOutSegmentEntry | not-accessible | current | An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1 | ColumnmplsOutSegmentIndex | not-accessible | current | This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2 | ColumnmplsOutSegmentIfIndex | read-create | current | This value must contain the interface index of the outgoing interface. This object may only take the value of 0 during the create-and-wait row creation operati… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3 | ColumnmplsOutSegmentPushTopLabel | read-create | current | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true if the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4 | ColumnmplsOutSegmentTopLabel | read-create | current | If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this va… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5 | ColumnmplsOutSegmentNextHopIpAddrType | read-create | current | Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6 | ColumnmplsOutSegmentNextHopIpv4Addr | read-create | current | IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it SHOULD return a value of 0. This obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7 | ColumnmplsOutSegmentNextHopIpv6Addr | read-create | current | IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it SHOULD return a value of 0. This obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8 | ColumnmplsOutSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9 | ColumnmplsOutSegmentOwner | read-create | current | Denotes the entity which created and is responsible for managing this segment. This object cannot be modified if mplsOutSegmentRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10 | ColumnmplsOutSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11 | ColumnmplsOutSegmentRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12 | ColumnmplsOutSegmentStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). If this variable is set to re… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7 | TablemplsOutSegmentPerfTable | not-accessible | current | This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1 | RowmplsOutSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1 | ColumnmplsOutSegmentOctets | read-only | current | This value contains the total number of octets sent on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2 | ColumnmplsOutSegmentPackets | read-only | current | This value contains the total number of packets sent on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3 | ColumnmplsOutSegmentErrors | read-only | current | Number of packets that could not be sent due to errors on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4 | ColumnmplsOutSegmentDiscards | read-only | current | The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5 | ColumnmplsOutSegmentHCOctets | read-only | current | Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6 | ColumnmplsOutSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8 | ScalarmplsXCIndexNext | read-only | current | This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9 | TablemplsXCTable | not-accessible | current | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsL… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1 | RowmplsXCEntry | not-accessible | current | A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1 | ColumnmplsXCIndex | not-accessible | current | Primary index for the conceptual row identifying a group of cross-connect segments. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2 | ColumnmplsXCLspId | read-create | current | This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3 | ColumnmplsXCLabelStackIndex | read-create | current | Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4 | ColumnmplsXCIsPersistent | read-create | current | Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5 | ColumnmplsXCOwner | read-create | current | Denotes the entity that created and is responsible for managing this cross-connect. This object cannot be modified if mplsXCRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6 | ColumnmplsXCRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7 | ColumnmplsXCStorageType | read-create | current | Defines the storage type for this object. This object cannot be modified if mplsXCRowStatus is active(1). If this variable is set to readOnly(5), and the corre… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8 | ColumnmplsXCAdminStatus | read-create | current | The desired operational status of this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9 | ColumnmplsXCOperStatus | read-only | current | The actual operational status of this cross- connect. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10 | ScalarmplsMaxLabelStackDepth | read-only | current | The maximum stack depth supported by this LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11 | ScalarmplsLabelStackIndexNext | read-only | current | This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no un… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12 | TablemplsLabelStackTable | not-accessible | current | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1 | RowmplsLabelStackEntry | not-accessible | current | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1 | ColumnmplsLabelStackIndex | not-accessible | current | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2 | ColumnmplsLabelStackLabelIndex | not-accessible | current | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3 | ColumnmplsLabelStackLabel | read-create | current | The label to pushed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4 | ColumnmplsLabelStackRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5 | ColumnmplsLabelStackStorageType | read-create | current | Defines the storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13 | ScalarmplsTrafficParamIndexNext | read-only | current | This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicate… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14 | TablemplsTrafficParamTable | not-accessible | current | This table specifies the Traffic Parameter objects for in and out-segments. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1 | RowmplsTrafficParamEntry | not-accessible | current | An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1 | ColumnmplsTrafficParamIndex | not-accessible | current | Uniquely identifies this row of the table. Note that zero represents an invalid index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2 | ColumnmplsTrafficParamMaxRate | read-create | current | Maximum rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3 | ColumnmplsTrafficParamMeanRate | read-create | current | Mean rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4 | ColumnmplsTrafficParamMaxBurstSize | read-create | current | Maximum burst size in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5 | ColumnmplsTrafficParamRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6 | ColumnmplsTrafficParamStorageType | read-create | current | The storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15 | ScalarmplsXCTrapEnable | read-write | current | If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2 | NodemplsLsrNotifications | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0 | NodemplsLsrNotifyPrefix | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.1 | NotificationmplsXCUp | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some … | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.2 | NotificationmplsXCDown | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from som… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3 | NodemplsLsrConformance | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1 | NodemplsLsrGroups | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.1 | GroupmplsInterfaceGroup | current | Collection of objects needed for MPLS interface configuration and performance information. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.2 | GroupmplsInSegmentGroup | current | Collection of objects needed to implement an in- segment. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.3 | GroupmplsOutSegmentGroup | current | Collection of objects needed to implement an out- segment. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.4 | GroupmplsXCGroup | current | Collection of objects needed to implement a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.5 | GroupmplsXCOptionalGroup | current | Collection of optional objects for implementing a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.6 | GroupmplsPerfGroup | current | Collection of objects providing performance information about an LSR. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.7 | GroupmplsHCInSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.8 | GroupmplsHCOutSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.9 | GroupmplsTrafficParamGroup | current | Object(s) required for supporting QoS resource reservation. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.10 | GroupmplsXCIsPersistentGroup | current | Objects needed to support persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.11 | GroupmplsXCIsNotPersistentGroup | current | Objects needed to support non-persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.12 | GroupmplsLabelStackGroup | current | Objects needed to support label stacking. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.13 | GroupmplsSegmentDiscontinuityGroup | current | A collection of objects providing information specific to segment discontinuities.. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.14 | GroupmplsLsrNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2 | NodemplsLsrCompliances | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2.1 | CompliancemplsLsrModuleCompliance | read-only | current | Compliance statement for agents that support the MPLS LSR MIB. |