HP-SN-VSRP-MIB
51 objects
No module-level DESCRIPTION found.
Imported Objects
| HP-SN-SWITCH-GROUP-MIB | snVsrp |
| RFC1155-SMI | Counter IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1 | NodesnVsrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1 | ScalarsnVsrpGroupOperModeVsrp | read-write | mandatory | The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2 | ScalarsnVsrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3 | ScalarsnVsrpIfMaxNumVridPerIntf | read-only | mandatory | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4 | ScalarsnVsrpIfMaxNumVridPerSystem | read-only | mandatory | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5 | ScalarsnVsrpClearVrrpStat | read-write | mandatory | Clear VSRP statistics command. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2 | NodesnVsrpIfIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1 | TablesnVsrpIfTable | not-accessible | mandatory | The VSRP Interface Table describes the interfaces from the viewpoint of VSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1 | RowsnVsrpIfEntry | not-accessible | mandatory | The VSRP Interface Entry describes one interface from the viewpoint of VSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1 | ColumnsnVsrpIfVlanId | read-only | mandatory | Vlan index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2 | ColumnsnVsrpIfAuthType | read-write | mandatory | The authentication type of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3 | ColumnsnVsrpIfAuthPassword | read-write | mandatory | The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3 | NodesnVsrpVirRtr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 | TablesnVsrpVirRtrTable | not-accessible | mandatory | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 | RowsnVsrpVirRtrEntry | not-accessible | mandatory | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1 | ColumnsnVsrpVirRtrVlanId | read-only | mandatory | Vlan index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2 | ColumnsnVsrpVirRtrId | read-only | mandatory | One of the virtual router ID of this vsrp interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3 | ColumnsnVsrpVirRtrOwnership | read-write | mandatory | The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp ro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4 | ColumnsnVsrpVirRtrCfgPriority | read-write | mandatory | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5 | ColumnsnVsrpVirRtrTrackPriority | read-write | mandatory | The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6 | ColumnsnVsrpVirRtrCurrPriority | read-only | mandatory | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7 | ColumnsnVsrpVirRtrHelloInt | read-write | mandatory | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8 | ColumnsnVsrpVirRtrDeadInt | read-write | mandatory | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9 | ColumnsnVsrpVirRtrPreemptMode | read-write | mandatory | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10 | ColumnsnVsrpVirRtrState | read-only | mandatory | This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11 | ColumnsnVsrpVirRtrIpAddrMask | read-write | mandatory | The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12 | ColumnsnVsrpVirRtrActivate | read-write | mandatory | This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 | ColumnsnVsrpVirRtrTrackPortList | read-write | mandatory | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14 | ColumnsnVsrpVirRtrAdvertiseBackup | read-write | mandatory | Set Advertise this backup router to master |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15 | ColumnsnVsrpVirRtrHoldDownInt | read-write | mandatory | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16 | ColumnsnVsrpVirRtrInitTtl | read-write | mandatory | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17 | ColumnsnVsrpVirRtrIncPortList | read-write | mandatory | Include all free ports of the VLAN into its control ports |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18 | ColumnsnVsrpVirRtrSave | read-write | mandatory | Set VSRP to save current parameters value |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19 | ColumnsnVsrpVirRtrBackupInt | read-write | mandatory | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20 | ColumnsnVsrpVirRtrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21 | ColumnsnVsrpVirRtrRxArpPktDropCnts | read-only | mandatory | The received vsrp ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22 | ColumnsnVsrpVirRtrRxIpPktDropCnts | read-only | mandatory | The received VSRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23 | ColumnsnVsrpVirRtrRxPortMismatchCnts | read-only | mandatory | The received vsrp Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24 | ColumnsnVsrpVirRtrRxNumOfIpMismatchCnts | read-only | mandatory | The received VSRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25 | ColumnsnVsrpVirRtrRxIpMismatchCnts | read-only | mandatory | The received vsrp IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26 | ColumnsnVsrpVirRtrRxHelloIntMismatchCnts | read-only | mandatory | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27 | ColumnsnVsrpVirRtrRxPriorityZeroFromMasterCnts | read-only | mandatory | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28 | ColumnsnVsrpVirRtrRxHigherPriorityCnts | read-only | mandatory | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29 | ColumnsnVsrpVirRtrTransToMasterStateCnts | read-only | mandatory | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30 | ColumnsnVsrpVirRtrTransToBackupStateCnts | read-only | mandatory | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31 | ColumnsnVsrpVirRtrCurrDeadInt | read-only | mandatory | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32 | ColumnsnVsrpVirRtrCurHelloInt | read-only | mandatory | Set backup router hello interval |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33 | ColumnsnVsrpVirRtrCurHoldDownInt | read-only | mandatory | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34 | ColumnsnVsrpVirRtrCurInitTtl | read-only | mandatory | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35 | ColumnsnVsrpVirRtrHelloMacAddress | read-only | mandatory | Hello MAC address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36 | ColumnsnVsrpVirRtrMasterIpAddr | read-only | mandatory | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. |