HP-SWITCH-BASIC-CONFIG-MIB
125 objects
This MIB module describes objects for basic switch configuration.
Imported Objects
| CONFIG-MIB | hpSwitchConfig hpSwitchFilterConfig hpSwitchIgmpConfig |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | PortList |
| SMON-MIB | portCopyEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2 | TablehpicfBridgeFilterConfigTable | not-accessible | current | A table that contains information about the source port traffic filter configuration in this device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1 | RowhpicfBridgeFilterConfigEntry | not-accessible | current | Information about a source port traffic filter configuration in this device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.1 | ColumnhpicfBridgeFilterName | not-accessible | current | This variable specifies the name of the filter. Filter name can be upto 20 characters. Filter name cannot contain tilde (~). A filter name can not be same as p… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.2 | ColumnhpicfBridgeFilterDropPortMask | read-create | current | This variable specifies a group of ports to which forwarding of filtered traffic is not permitted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.3 | ColumnhpicfBridgeFilterEntryStatus | read-create | current | Row can be deleted only when no port are mapped to this filter in 'hpSwitchFilterConfigEntry' table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5 | TablehpSwitchIgmpProxyDomainConfigTable | not-accessible | current | A table that contains information about the IGMP proxy domain configurations on this switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1 | RowhpSwitchIgmpProxyDomainConfigEntry | not-accessible | current | The information associated with each IGMP proxy domain configuration. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.1 | ColumnhpSwitchIgmpProxyDomainId | not-accessible | current | The domain id that uniquely identifies a row in the IGMP proxy domain configuration table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.2 | ColumnhpSwitchIgmpProxyDomainStatus | read-create | current | The status of a IGMP proxy domain configuration entry. Allows creation/deletion of the IGMP proxy domain entry. Row cannot be deleted if the IGMP proxy domain … |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.3 | ColumnhpSwitchIgmpProxyDomainName | read-create | current | The IGMP proxy domain name. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.4 | ColumnhpSwitchIgmpProxyDomainIp | read-create | current | The IGMP proxy domain IP. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.5 | ColumnhpSwitchIgmpProxyMcastLowerIp | read-create | current | The IGMP proxy domain's lower multicast IP. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.6 | ColumnhpSwitchIgmpProxyMcastUpperIp | read-create | current | The IGMP proxy domain's upper multicast IP. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29 | IdentityhpSwitchBasicConfigMIB | This MIB module describes objects for basic switch configuration. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1 | NodehpSwitchBasicConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0 | NodehpSwitchNotificationObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.1 | ScalarhpSwitchStartupConfigSource | accessible-for-notify | current | Indicate the method of change to startup config was initiated. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.2 | ScalarhpSwitchStartupConfigSourceIPAddrType | accessible-for-notify | current | Indicates the source address type of network agent which made a change. Not valid (set to zero) if change is made via CLI on system console. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.3 | ScalarhpSwitchStartupConfigSourceIPAddr | accessible-for-notify | current | Indicates the source address of network agent which made a change. Not valid (set to zero) if change is made via CLI on system console. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.4 | ScalarhpSwitchStartupConfigSourceUsername | accessible-for-notify | current | Indicates the username of CLI user making the change to startup config. Zero-string if username is not set or change is made via SNMP |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.5 | ScalarhpSwitchStartupConfigThrottled | accessible-for-notify | current | Indicates if notification throttle was activated and one or more notifications were dropped. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.6 | NotificationhpSwitchStartupConfigChange | current | The hpSwitchStartupConfigChange notification signifies that switch's startup config was modified by user/manager. Notifications might be buffered on the system… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.7 | NotificationhpSwitchRunningConfigChange | current | Notification of a running configuration change event as recorded in hpSwitchRunningCfgChgTable. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 | ScalarhpSwitchSaveConfig | read-write | current | When this object is set to to 'saveConfig' it results in saving the running configuration of the switch to flash. The saved configuration becomes the boot-up c… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2 | TablehpSwitchAliasTable | not-accessible | current | Table of alias configurations for CLI commands. This table contains information about name of the alias and the corresponding CLI command. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1 | RowhpSwitchAliasEntry | not-accessible | current | A row in the alias config table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.1 | ColumnhpSwitchAliasName | not-accessible | current | Name of the alias which uniquely identifies alias configuration table. 'hpSwitchAliasName' can be used in place of 'hpSwitchAliasCommand` on the CLI. Maximum a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.2 | ColumnhpSwitchAliasCommand | read-create | current | CLI command for which 'hpSwitchAliasName' can be used in CLI. Maximum allowed length for alias command is 255 characters. This object is required to create an … |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.3 | ColumnhpSwitchAliasConfigRowStatus | read-create | current | Controls creation/deletion of entries in alias table. Row cant be created when 'hpSwitchAliasCommand' is of zero length. Row transition to 'notReady' or 'notIn… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3 | NodehpSwitchACLConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1 | ScalarhpSwitchAclLogtimeoutConfig | read-write | current | The time in seconds between ACL logging summary messages. Some devices may limit the range to 30..300. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.2 | ScalarhpSwitchAclIpv4DenyFragmentedTcpHeader | read-write | current | Configure the device to drop all IPv4 packets containing a fragmented TCP header. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.3 | ScalarhpSwitchAclIpv6DenyNonClassifiableL4Header | read-write | current | Configure the device to drop all IPv6 packets for which the Layer 4 header cannot be processed by ACL hardware. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.4 | ScalarhpSwitchAclGroupingEnable | read-write | current | This object enables or disables ACL Grouping support. When set to true(1), ACL Grouping will allow for the sharing of hardware entries from an ACL with the sam… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4 | TablehpicfPortCopyNameTable | not-accessible | current | This table contains Mirroring Destination name String. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1 | RowhpicfPortCopyNameEntry | not-accessible | current | An entry in the hpicfPortCopyNameEntry contains Mirroring Destination name string. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1.1 | ColumnhpicfPortCopyName | read-create | current | Mirroring Destination name string. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5 | ScalarhpSwitchDefaultLogon | read-write | current | This indicates whether switch should boot to CLI (default) or menu. The changes takes effect after rebooting the switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6 | TablehpSwitchChassisLocateTable | not-accessible | current | This table is contains information about the current state of all the chassis locate LEDs. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1 | RowhpSwitchChassisLocateEntry | not-accessible | current | Contains information about the current state of a particular chassis LED. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.1 | ColumnhpSwitchChassisLocateState | read-write | current | The current state of the chassis locate LED. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.2 | ColumnhpSwitchChassisLocateDuration | read-write | current | The duration for which the current LED state is to be maintained. The minimum value is 60 and the maximum value is 86400. The 'off' state does not require a du… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.3 | ColumnhpSwitchChassisLocateWhen | read-write | current | When to apply the values specified by hpSwitchChassisLocateState and hpSwitchChassisLocateDuration. If not specified, the default is now. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7 | NodehpSwitchModules | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1 | TablehpSwitchModuleInfoTable | not-accessible | current | A table describing all modules that can be supported by the device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1 | RowhpSwitchModuleInfoEntry | not-accessible | current | The information regarding the module type in the switch. This table lists all the supported module types. The supported module type will have the equivalent mo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.1 | ColumnhpSwitchModuleInfoModId | not-accessible | current | The module Id. This is a sequence number |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.2 | ColumnhpSwitchModuleInfoModType | read-only | current | The module type in the switch. This is the Jnumber string that is supported on the device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2 | TablehpSwitchModuleConfigTable | not-accessible | current | A table to configure the module type for a specific module. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1 | RowhpSwitchModuleConfigEntry | not-accessible | current | This entry is used to configure the module type for a specific module. Configuration of module type is not allowed if it is already configured. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.1 | ColumnhpSwitchModuleConfigModType | read-write | current | The module type in the switch. This is the Jnumber supported on the device. The supported types are listed in hpSwitchModuleInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.2 | ColumnhpSwitchModuleConfigModName | read-only | current | The module name in the switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.3 | ColumnhpSwitchModuleConfigModRemove | read-write | current | This MIB object is used to remove the slot configuration. Setting this object to true (1) will remove the module configuration. Default value is false (2). Thi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8 | ScalarhpSwitchWebSupportUrl | read-write | current | URL for the web interface support page. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 | ScalarhpSwitchStartupConfigSeqNum | read-write | current | This is the value of the global startup-config sequential number. Every change to startup-config increments the value by 1. Must be stored in non-volatile memo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10 | ScalarhpSwitchStartupConfigNotifyEnable | read-write | current | Indicates whether the SNMP entity is permitted to generate hpSwitchStartupConfigChange notifications. Default is disabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11 | ScalarhpSwitchImplicitConfigSave | read-write | current | This object is to enable/disable the implicit write-memory (saving the running-config to the flash) done after every successful SNMP set operation. When set to… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12 | NodehpSwitchRunningCfgChgObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.1 | ScalarhpSwitchRunningCfgChgNotifyEnable | read-write | current | Indicates whether the SNMP entity is permitted to generate hpSwitchRunningConfigChange notifications. Default is disabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2 | ScalarhpSwitchRunningCfgChgTransmitInterval | read-write | current | Specifies the transmission interval in seconds for sending running config change traps. Only one running config change trap is sent in this time interval. Defa… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.3 | ScalarhpSwitchRunningCfgChgLatestDateAndTime | read-only | current | Indicates the date and time of the most recent running config change. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.4 | ScalarhpSwitchRunningCfgChgCount | read-only | current | The total number of running config changes since last reboot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.5 | ScalarhpSwitchRunningCfgChgEntriesBumped | read-only | current | The number of times the oldest entry in hpSwitchRunningCfgChgTable was discarded to make room for a new entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6 | TablehpSwitchRunningCfgChgEventTable | not-accessible | current | A table of latest 32 running configuration change events. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1 | RowhpSwitchRunningCfgChgEventEntry | not-accessible | current | Information about running configuration change event on this switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.1 | ColumnhpSwitchRunningCfgChgEventTableIndex | not-accessible | current | The Index for hpSwitchRunningCfgChgTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.2 | ColumnhpSwitchRunningCfgChgEventId | read-only | current | Identifies a specific running config change. Monotonically increasing values will be assigned by the system to each event as it occurs. If the system is reset,… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.3 | ColumnhpSwitchRunningCfgChgEventMethod | read-only | current | Indicates the source through which change to running config was initiated. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.4 | ColumnhpSwitchRunningCfgChgEventSourceIPAddrType | read-only | current | Indicates the source address type of network agent which made a change. This object value is set to an address type of unknown when not applicable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.5 | ColumnhpSwitchRunningCfgChgEventSourceIPAddr | read-only | current | Indicates the source address of network agent which made a running config change. The value is an address of length 0 (unknown(0)) if not available or not appl… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.6 | ColumnhpSwitchRunningCfgChgEventUsername | read-only | current | Indicates the username of the user making the change the change to running config. Empty string (length 0) if username is not available or not applicable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.7 | ColumnhpSwitchRunningCfgChgEventDateAndTime | read-only | current | Indicates the date and time of the running config change. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13 | ScalarhpSwitchSecureModeLevel | read-write | current | Indicates current Secure-Mode Level of switch standard : switch operates with standard security capabilities. enhanced : switch operates with enhanced security… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14 | ScalarhpSwitchCdpRunMode | read-write | current | Indicates the mode of CDP processing. This variable has no effect when CDP is disabled (cdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15 | NodehpSwitchCdpObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1 | TablehpSwitchCdpPreStdVoiceTable | not-accessible | current | Information about cdp pre-standard-voice admin status for each port in this device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1 | RowhpSwitchCdpPreStdVoiceEntry | not-accessible | current | Information about cdp pre-standard-voice admin status for a switch port. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1.1 | ColumnhpSwitchCdpPreStdVoiceIfIndex | not-accessible | current | The ifIndex value of the local interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1.2 | ColumnhpSwitchCdpPreStdVoiceStatus | read-write | current | Indicates the admin status for cdp pre-standard-voice mode for this cdpInterfaceIfIndex entry Default is txAndRx and this value is valid only if hpSwitchCdpRun… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.16 | ScalarhpSwitchIgnoreUntagMacPortList | read-write | current | Prevent learning MAC addresses on the specified ports when the VLAN is untagged and the destination MAC address is one of the following: 01000C-CCCCCC (CDP) 01… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17 | ScalarhpSwitchControlPlaneProtectionAdminStatus | read-write | current | The operational status of the Control Plane Protection feature. When Control Plane Protection feature is enabled on a device, if the number of IP error packets… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19 | NodehpSwitchFPModules | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1 | TablehpSwitchFPModuleConfigTable | not-accessible | current | A table that contains the configuration details for flexible modules. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1 | RowhpSwitchFPModuleConfigEntry | not-accessible | current | An entry in the table that contains the configuration details of a flexible module. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1.1 | ColumnhpSwitchFPModuleConfigType | read-write | current | The J-Number of the flexible module. When set to a value other than none, the value can only be changed to none. Setting this object to none (0) erases the fle… |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1.2 | ColumnhpSwitchFPModuleConfigName | read-write | current | The flexible module name in the switch. Some devices do not support configuration of the flexible module name and will return an error if this object is set. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.20 | ScalarhpSwitchRESTInterfaceStatus | read-write | current | The object that can be used to enable or disable the REST interface. The default value is enable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.21 | ScalarhpSwitchRESTSessionIdleTimeout | read-write | current | The time period after which the REST session timeout occurs. A user can configure this parameter. The default value is 600 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2 | NodehpSwitchBasicConfigConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1 | NodehpSwitchBasicConfigCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.1 | CompliancehpSwitchBasicConfigCompliance | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.2 | CompliancehpSwitchBasicConfigCompliance2 | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.3 | CompliancehpSwitchBasicConfigCompliance3 | read-only | current | The compliance statement for config entities which implements basic configuration of the switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.4 | CompliancehpSwitchBasicConfigCompliance4 | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.5 | CompliancehpSwitchBasicConfigCompliance5 | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.6 | CompliancehpSwitchBasicConfigCompliance6 | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.7 | CompliancehpSwitchBasicConfigCompliance7 | current | The compliance statement for config entities which implements the basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.8 | CompliancehpSwitchBasicConfigCompliance8 | current | The compliance statement for entities that implement the Control Plane Protection feature on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.10 | CompliancehpSwitchBasicConfigCompliance10 | current | The compliance statement for entities that implement the flexible Module configuration on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.11 | CompliancehpSwitchBasicConfigCompliance11 | current | The compliance statement for entities that implement the REST interface configuration on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.12 | CompliancehpSwitchBasicConfigCompliance12 | current | The compliance statement for config entities which implements basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2 | NodehpSwitchBasicConfigGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.1 | GrouphpSwitchBasicConfigGroup | current | A collection of objects for basic configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.2 | GrouphpSwitchAliasGroup | current | A collection of objects for alias configuration for CLI commands. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.3 | GrouphpicfBridgeFilterConfigGroup | current | A collection of objects for source-port filter configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.4 | GrouphpicfPortCopyNameGroup | current | A collection of objects for mirror configuration for CLI commands. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.5 | GrouphpSwitchAclLogtimeoutGroup | current | A collection of objects for ACL log timeout configuration of the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.6 | GrouphpSwitchIgmpProxyDomainConfigGroup | current | A collection of objects for IGMP proxy domain configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.7 | GrouphpSwitchChassisLocateGroup | current | A collection of objects for chassis locate configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.8 | GrouphpSwitchModuleGroup | current | A collection of objects for switch module configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.9 | GrouphpSwitchStartupConfigChangeGroup | current | A collection of objects for startup config change notifications. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.10 | GrouphpSwitchBasicConfigGroup2 | current | A collection of objects for switch basic configurations. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.11 | GrouphpSwitchRunningCfgChgGroup | current | A collection of objects for running config change details and its notification. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.12 | GrouphpSwitchBasicConfigGroup3 | current | A collection of objects for switch Secure mode configurations. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.13 | GrouphpSwitchCdpConfigGroup | current | A collection of objects for Cisco discovery protocol mode configurations. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.14 | GrouphpSwitchCdpPreStdVoiceGroup | current | A collection of objects for Cisco discovery protocol mode configurations. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.15 | GrouphpSwitchIgnoreUntagMacConfigGroup | current | A collection of objects for Ignore untag MAC configurations. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.16 | GrouphpSwitchModuleConfigGroup | current | Group of objects representing module configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.17 | GrouphpSwitchBasicConfigGroup4 | current | A collection of objects to configure the Control Plane Protection on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.20 | GrouphpSwitchAclGroup | current | A collection of objects to configure ACL options on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.21 | GrouphpSwitchFPModuleGroup | current | A collection of objects for switch flexible module configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.22 | GrouphpSwitchRESTInterfaceGroup | current | A collection of objects for the Representational State Transfer (REST) interface configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.23 | GrouphpSwitchAclGroupingEnableGroup | current | A collection of objects to configure ACL Grouping options on a device. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.3 | NodehpSwitchBasicNotificationGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.3.1 | GrouphpSwitchBasicNotificationGroup | current | Switch Basic Config notifications |