HP-TUNNEL-MIB
22 objects
The MIB module for managing the tunnel interfaces
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| TUNNEL-MIB | tunnelIfEntry tunnelInetConfigEntry |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.77 | IdentityhpTunnelMIB | The MIB module for managing the tunnel interfaces | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.0 | NodehpTunnelNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1 | NodehpTunnelObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1 | TablehpTunnelConfigTable | not-accessible | current | This table is used to provision a tunnel without having to configure the source and destination endpoints of the tunnel. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1 | RowhpTunnelConfigEntry | not-accessible | current | A set of objects that are used to create a tunnel. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.1 | ColumnhpTunnelID | not-accessible | current | An identifier to configure the tunnel. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.2 | ColumnhpTunnelIfIndex | read-only | current | The interface index associated with this tunnel entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.3 | ColumnhpTunnelRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2 | TablehpTunnelIfTable | not-accessible | current | This table augments the tunnelIfTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1 | RowhpTunnelIfEntry | not-accessible | current | A set of objects as an augment to tunnelIfTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.3 | ColumnhpTunnelIfMTU | read-write | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.4 | ColumnhpTunnelEncapsMethod | read-write | current | The encapsulation method used by the tunnel. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3 | TablehpTunnelInetConfigTable | not-accessible | current | This table augments the tunnelInetConfigTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1 | RowhpTunnelInetConfigEntry | not-accessible | current | A set of objects as an augment to tunnelInetConfigTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1.1 | ColumnhpTunnelInetConfigEncapsMethod | read-write | current | The encapsulation method used by this tunnel. |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2 | NodehpTunnelConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2.1 | NodehpTunnelMIBCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2.1.1 | CompliancehpTunnelMIBCompliance | current | The compliance statement for the HP Tunnel MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2 | NodehpTunnelMIBGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.1 | GrouphpTunnelProvisionGroup | current | A collection of objects to support creation of a tunnel. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.2 | GrouphpTunnelInetConfigGroup | current | A collection of objects to augment tunnelInetConfigTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpTunnelType | INTEGER { unspecified(1), direct4in4(2), direct6in4(3), direct6in4Ipsec(4), direct6in6(5), ipsecIpv4(6), ipsecIpv6(7) } | current | The encapsulation method used by a tunnel. |