HPN-ICF-POWER-ETH-EXT-MIB
129 objects
Description.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| POWER-ETHERNET-MIB | pethMainPseGroupIndex pethPsePortDetectionStatus pethPsePortGroupIndex pethPsePortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.14 | IdentityhpnicfPowerEthernetExt | Description. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1 | TablehpnicfPsePortTable | not-accessible | current | The indexing scheme is taken form that used by the IETF Power MIB. The same indexing scheme is used to give continuity in behaviour between that standard and t… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1 | RowhpnicfPsePortEntry | not-accessible | current | The pethPsePortGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. G… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.2 | ColumnhpnicfPsePortFaultDescription | read-write | current | The object supports the fault category of the IETF Power MIB [1] pethPsePortDetectionStatus object. A textual description containing more information about the… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3 | ColumnhpnicfPsePortPeakPower | read-write | current | The object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consu… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.4 | ColumnhpnicfPsePortAveragePower | read-write | current | The object specifies the average power which has been consumed by the port. This object is a read/write integer value with units of milliWatts. Writing a value… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.5 | ColumnhpnicfPsePortCurrentPower | read-only | current | The object specifies the power currently being consumed by the port. It is a read only integer value with units of milliWatts. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.6 | ColumnhpnicfPsePortPowerLimit | read-write | current | The object specifies the power limit set for this port. The PSE will not supply more than this level of power to the specified port. It is a read/write integer… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.7 | ColumnhpnicfPsePortProfileIndex | read-write | current | Indicates the power profile which is currently associated with this port. This object references the corresponding hpnicfPseProfileIndex object in the power pr… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2 | TablehpnicfMainPseTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1 | RowhpnicfMainPseEntry | not-accessible | current | The pethMainPseGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. G… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.1 | ColumnhpnicfMainPsePowerLimit | read-write | current | The object specifies the power limit set for the unit as a whole. The PoE unit will already have a nominal power defined by the IETF Power MIB [1] pethMainPseP… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.2 | ColumnhpnicfMainPseAveragePower | read-write | current | The object specifies the average power which has been consumed by the port. It is a read/write integer value with units of Watts (note - Watts is chosen instea… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.3 | ColumnhpnicfMainPsePeakPower | read-write | current | The object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.4 | ColumnhpnicfMainGuaranteedPowerRemaining | read-only | current | The object specifies the amount of power remaining in the guaranteed power pool. Each time a port is placed into guaranteed mode it reserves a set amount of po… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5 | ColumnhpnicfMainPsePriorityMode | read-write | current | Describes or controls the priority mode on slot which must be enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnecti… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.6 | ColumnhpnicfMainPseLegacy | read-write | current | Describes or controls the legacy mode on slot which must be enabled firstly. Legacy mode: standard or nonstandard PD detection mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.7 | ColumnhpnicfMainPsePowerPriority | read-write | current | Describes or controls the priority of the PSE. The priority will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.3 | ScalarhpnicfPseAutoDetectActive | read-write | current | The object specifies whether the device auto-detection feature is active. If this object is set to Active, and a known powered device is detected, then the por… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4 | NodehpnicfPseComformance | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.1 | NodehpnicfPseCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.1.1 | CompliancehpnicfPseCompliance | current | Description. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2 | NodehpnicfPseGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.1 | GrouphpnicfPsePortGroup | current | A collection of objects should be supported at the same time. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.2 | GrouphpnicfMainPseGroup | current | A collection of objects should be supported at the same time. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.3 | GrouphpnicfPseScalarGroup | current | A collection of scalar objects supported. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.4 | GrouphpnicfPsePDNotificationGroup | current | PD Change Notification. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.5 | GrouphpnicfPseProfilesGroup | current | A collection of objects should be supported at the same time. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.6 | GrouphpnicfPOEPowerThresholdLimitGroup | current | Power threshold limits group. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.7 | GrouphpnicfPOEPowerSupInfoGroup | current | The basic Power information group. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.8 | GrouphpnicfPOEPowerDCOutStateGroup | current | The DC out power state group. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.9 | GrouphpnicfPOEPowerDCOutInfoGroup | current | The power AC input switch information group | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.10 | GrouphpnicfPOEPowerACSwitchStateModuleGroup | current | PD Change Notification. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.11 | GrouphpnicfPOEPowerInCurStateGroup | current | PD Change Notification. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.12 | GrouphpnicfPOEPowerAlarmStateGroup | current | PD Change Notification. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.5 | ScalarhpnicfPsePowerMaxValue | read-write | current | The object specifies the max poe power for lanswitch. The value should between the power currently and the max power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6 | NodehpnicfpseportNotification | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.1 | NotificationhpnicfpsePDChangeNotification | current | This notification indicates if PD has been inserted or pulled out. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.2 | NotificationhpnicfPOEDisconnectNotification | current | This notification indicates the POE power module does not disconnect. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.3 | NotificationhpnicfPOEInputErrorNotification | current | This notification indicates the POE power module input error. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.4 | NotificationhpnicfPOEOutputErrorNotification | current | This notification indicates the POE power module output error. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.5 | NotificationhpnicfPOEOverVoltageNotification | current | This notification indicates the POE power module overruns the voltage limit. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.6 | NotificationhpnicfPOEOverTempNotification | current | This notification indicates the POE power module overruns the temperature limit. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.7 | NotificationhpnicfPOEFanErrorNotification | current | This notification indicates the POE power module fan error. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.8 | NotificationhpnicfPOEModuleShutdownNotification | current | This notification indicates the POE power module is closed. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.9 | NotificationhpnicfPOECurRestrictedNotification | current | This notification indicates the POE power module current is restricted. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.10 | NotificationhpnicfPOEACSwitchNotification | current | This notification indicates the AC input switch alarm of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.11 | NotificationhpnicfPOEACInCurANotification | current | This notification indicates the AC input current A alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.12 | NotificationhpnicfPOEACInCurBNotification | current | This notification indicates the AC input current B alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.13 | NotificationhpnicfPOEACInCurCNotification | current | This notification indicates the AC input current C alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.14 | NotificationhpnicfPOEACSwitchVolABNotification | current | This notification indicates the AC input voltage AB alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.15 | NotificationhpnicfPOEACSwitchVolBCNotification | current | This notification indicates the AC input voltage BC alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.16 | NotificationhpnicfPOEACSwitchVolCANotification | current | This notification indicates the AC input voltage CA alarm state of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.17 | NotificationhpnicfPOEDCOutVolNotification | current | This notification indicates the DC output alarm of this POE power. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.6.18 | NotificationhpnicfPOEShutdownNotification | current | This notification indicates the whole POE power has been shutdown. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7 | TablehpnicfPseProfilesTable | not-accessible | current | A table of objects representing a set of power profiles. Power profiles can be applied to PoE ports, which have the effect of automatically setting the priorit… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1 | RowhpnicfPseProfilesEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.1 | ColumnhpnicfPseProfileIndex | not-accessible | current | The index of the profile. This uniquely allow the profile to be identified. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.2 | ColumnhpnicfPseProfileName | read-create | current | Assigns the profile a name with which the settings can be assiciated with. For example, 'NBX Phone'. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.3 | ColumnhpnicfPseProfilePowerMode | read-create | current | The power mode associated with this power profile. There are two possible power modes as follows: powerDisabled, powerEnabled. When a power profile is applied … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.4 | ColumnhpnicfPseProfilePowerLimit | read-create | current | The power limit to be applied to the ports hpnicfPsePortPowerLimit object when the profile is applied to the PSE port. Expressed in milliWatts. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.5 | ColumnhpnicfPseProfilePriority | read-create | current | This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used b… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.6 | ColumnhpnicfPseProfilePairs | read-create | current | Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the sign… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.7 | ColumnhpnicfPseProfileApplyNum | read-only | current | The number of this profile which has been applied. If hpnicfPseProfileApplyNum is not zero, user can't change the current line. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.8 | ColumnhpnicfPseProfileRowStatus | read-create | current | The status of this classifier. If hpnicfPseProfileApplyNum is not zero, user can't delete the current line. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8 | NodehpnicfPOEPowerObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.1 | NodehpnicfPOEThresholdLimitObjs | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.1 | ScalarhpnicfPOEThresholdACMimimum | read-write | current | Input threshold AC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.2 | ScalarhpnicfPOEThresholdACMaximum | read-write | current | Input threshold AC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.3 | ScalarhpnicfPOEThresholdDCMinimum | read-write | current | Input threshold DC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.4 | ScalarhpnicfPOEThresholdDCMaximum | read-write | current | Input threshold DC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2 | NodehpnicfPOESupModuleInfoObjs | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.1 | ScalarhpnicfPOEPowerType | read-only | current | The type of the power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.2 | ScalarhpnicfPOEPowerModuleNum | read-only | current | The number of the power modules. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.3 | ScalarhpnicfPOESupervisionModuleName | read-only | current | The object specifies the Supervision Module name on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.4 | ScalarhpnicfPOESMMajorVersion | read-only | current | The object specifies the high byte of the monitor module version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.5 | ScalarhpnicfPOESMMinorVersion | read-only | current | The object specifies the low byte of the monitor module version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.6 | ScalarhpnicfPOESMFactorName | read-only | current | The object specifies the name of the manufactor. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7 | TablehpnicfPOEModuleInfoTable | not-accessible | current | The table of the module information on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1 | RowhpnicfPOEModuleInfoEntry | not-accessible | current | The entry of the module information on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.1 | ColumnhpnicfPOEModuleIndex | accessible-for-notify | current | The index of the current module on this POE power. It is also the index of hpnicfPOEModuleInfoTable. The range of this node is from 1 to hpnicfPOEPowerModuleNu… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.2 | ColumnhpnicfPOEModuleID | read-only | current | The ID of the current module on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.3 | ColumnhpnicfPOEModuleInfoPower | read-only | current | The power of the current module on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.4 | ColumnhpnicfPOEModuleHardVerInfo | read-only | current | The hardware version information of the current module on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3 | NodehpnicfPOEDCOutStateObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.1 | ScalarhpnicfPOEDCOutStateModuleNum | read-only | current | The module number on this POE power. It is the maximum of the hpnicfPOEDCOutStateIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2 | TablehpnicfPOEDCOutStateTable | not-accessible | current | The table of DC output power state on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1 | RowhpnicfPOEDCOutStateEntry | not-accessible | current | The entry of the DC output power state on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1.1 | ColumnhpnicfPOEDCOutStateIndex | accessible-for-notify | current | The index of the DC output power state on this POE power. The range of this node is from 1 to hpnicfPOEDCOutStateModuleNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1.2 | ColumnhpnicfPOEDCOutDCVolAlarm | read-only | current | The DC output alarm of the DC output power state on this POE power. The value of this node will be the following values: normal (1), underLimit (2), aboveLimit… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4 | NodehpnicfPOEDCOutInfoObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.1 | ScalarhpnicfPOEDCOutCurNum | read-only | current | The number of DC output current on this POE power. It is the maximum of hpnicfPOEDCOutInfoIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2 | TablehpnicfPOEDCOutInfoTable | not-accessible | current | The table of the DC output information on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1 | RowhpnicfPOEDCOutInfoEntry | not-accessible | current | The entry of the DC output information on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.1 | ColumnhpnicfPOEDCOutInfoIndex | accessible-for-notify | current | The index of the DC output information on this POE POWER. The range of this node is from 1 to hpnicfPOEDCOutCurNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.2 | ColumnhpnicfPOEDCOutVol | read-only | current | The DC output voltage of the current DC output on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.3 | ColumnhpnicfPOEDCOutInfoLoadCur | read-only | current | The total load current of the current DC output on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5 | NodehpnicfPOEACSwitchStateModuleObjs | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.1 | ScalarhpnicfPOEACSwitchStateModuleNum | read-only | current | The number of the AC swtich state module on this POE power. It is the maximum of hpnicfPOEACSwitchStateIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2 | TablehpnicfPOEACSwitchStateTable | not-accessible | current | The table of the AC switch state on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1 | RowhpnicfPOEACSwitchStateEntry | not-accessible | current | The entry of the AC switch state on this POE power. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1.1 | ColumnhpnicfPOEACSwitchStateIndex | accessible-for-notify | current | The index of the AC switch state on this POE power. The range of this node is from 1 to hpnicfPOEACSwitchStateModuleNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1.2 | ColumnhpnicfPOEACSwitchState | read-only | current | The AC switch state on this POE power. The value of this node will be one of the following values: on (1), off (2), highVoltInput (3), lowVoltInput (4) |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6 | NodehpnicfPOEInCurStateObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.1 | ScalarhpnicfPOEInCurStateModuleNum | read-only | current | The DC input current state of the module on this POE power. It is the maximum of the hpnicfPOESwitchStateVolExIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.2 | ScalarhpnicfPOEInCurAState | read-only | current | The current A state in the DC input on this POE power. normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.3 | ScalarhpnicfPOEInCurBState | read-only | current | The current B state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.4 | ScalarhpnicfPOEInCurCState | read-only | current | The current C state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), … |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5 | TablehpnicfPOESwitchStateVolExTable | not-accessible | current | All alarm status of the VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fus… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1 | RowhpnicfPOESwitchStateVolExEntry | not-accessible | current | The hpnicfPOESwitchStateVolExIndex will match the number of the VOL status. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.1 | ColumnhpnicfPOESwitchStateVolExIndex | accessible-for-notify | current | The object species the index of the VOL status. The range of this node is from 1 to hpnicfPOEInCurStateModuleNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2 | ColumnhpnicfPOESwitchStateInVolAB | read-only | current | The object specifies the VOL AB alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.3 | ColumnhpnicfPOESwitchStateInVolBC | read-only | current | The object specifies the VOL BC alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.4 | ColumnhpnicfPOESwitchStateInVolCA | read-only | current | The object specifies the VOL CA alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7 | NodehpnicfPOEAlarmStateObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.1 | ScalarhpnicfPOEAlarmStateModuleNum | read-only | current | The object specifies the number of the power modules in alarm state. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2 | TablehpnicfPOEAlarmStateInfoTable | not-accessible | current | All alarm states in the POE power modules. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1 | RowhpnicfPOEAlarmStateInfoEntry | not-accessible | current | The hpnicfPOEAlarmModuleInfoIndex will match the number of the power module. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.1 | ColumnhpnicfPOEAlarmModuleInfoIndex | accessible-for-notify | current | The index specifies the index of the HpnicfPOEAlarmStateInfoEntry table. The range of this node is from 1 to hpnicfPOEAlarmStateModuleNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.2 | ColumnhpnicfPOEModuleDisconnect | read-only | current | The node specifies the alarm state: The module does not link. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.3 | ColumnhpnicfPOEModuleInputError | read-only | current | The node specifies the alarm state: Input error. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.4 | ColumnhpnicfPOEModuleOutputError | read-only | current | The node specifies the alarm state: Output error. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.5 | ColumnhpnicfPOEModuleOverVoltage | read-only | current | The node specifies the alarm state: The voltage is too high. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.6 | ColumnhpnicfPOEModuleOverTemp | read-only | current | The node specifies the alarm state: The temperature is too high. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.7 | ColumnhpnicfPOEModuleFanError | read-only | current | The node specifies the alarm state: The fan error. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.8 | ColumnhpnicfPOEModuleShutdown | read-only | current | The node specifies the alarm state: The module is shutdown. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.9 | ColumnhpnicfPOEModuleCurRestricted | read-only | current | The node specifies the alarm state: The module limit the current. The value of this node is one of the following values: normal (1), alarm (2). |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.9 | ScalarhpnicfPsePolicyMode | read-write | current | The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power wi… |
| 1.3.6.1.4.1.11.2.14.11.15.2.14.10 | ScalarhpnicfPDPolicyMode | read-write | current | The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will … |