MIB Viewer

HPN-ICF-RPR-MIB

132 objects
This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner.
Imported Objects
HPN-ICF-OID-MIBhpnicfCommon
IEEE-802DOT17-RPR-MIB MISSINGrprTopoImageEntry rprTopoImageInetAddress rprTopoImageMacAddress
IF-MIBInterfaceIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-TCRowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.14.11.15.2.60IdentityhpnicfRprThis MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm condi…
1.3.6.1.4.1.11.2.14.11.15.2.60.1NodehpnicfRprObjects
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1NodehpnicfRprMaxmumDefine
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1TablehpnicfRprMaxmumDefineTablenot-accessiblecurrentThis table contains the specs of RPR ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1RowhpnicfRprMaxmumDefineEntrynot-accessiblecurrentThe entry of RPR Maximum Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.1ColumnhpnicfRprMaxMumIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.2ColumnhpnicfRprMaxStationNumDefineread-onlycurrentMax station number supported by RPR ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3ColumnhpnicfRprMaxReservedRateDefineread-onlycurrentMax reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2NodehpnicfRprTopoImage
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1TablehpnicfRprTopoImageXTablenot-accessiblecurrentThis table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1RowhpnicfRprTopoImageXEntrynot-accessiblecurrentEach entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zer…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.3ColumnhpnicfRprTopoImageXWestEdgeStatusread-onlycurrentThe current edge status of the west span. If an edge exists,the hpnicfRprTopoImageXWestEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXWestEdgeStatus is …
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.4ColumnhpnicfRprTopoImageXEastEdgeStatusread-onlycurrentThe current edge status of the east span. If an edge exists, the hpnicfRprTopoImageXEastEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXEastEdgeStatus is…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.5ColumnhpnicfRprTopoImageXStationNameread-writecurrentThe operator assigned station name. The operator can assigned it by hpnicfRprTopoImageXStationName.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3NodehpnicfRprSpanCounters
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1TablehpnicfRprSrcMacCountTablenot-accessiblecurrentThe RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1RowhpnicfRprSrcMacCountEntrynot-accessiblecurrentAn entry in the RPR Source Mac Count Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.1ColumnhpnicfRprSrcMacCountIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.2ColumnhpnicfRprSrcMacCountBySrcAddressnot-accessiblecurrentMAC address of the source station where the frames come from.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.3ColumnhpnicfRprSrcMacCountReceivedFramesread-onlycurrentFrames received from a particular MAC address of source station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.4ColumnhpnicfRprSrcMacCountReceivedOctetsread-onlycurrentOctets received from a particular MAC address of source station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2TablehpnicfRprDestMacCountTablenot-accessiblecurrentThe RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1RowhpnicfRprDestMacCountEntrynot-accessiblecurrentAn entry in the RPR MAC Destination Count Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.1ColumnhpnicfRprDestMacCountIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.2ColumnhpnicfRprDestMacCountByDestAddressnot-accessiblecurrentMAC address of the destination station where the frames are sent to.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.3ColumnhpnicfRprDestMacCountReceivedFramesread-onlycurrentFrames sent to a particular MAC address of destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.4ColumnhpnicfRprDestMacCountReceivedOctetsread-onlycurrentOctets sent to a particular MAC address of destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3TablehpnicfRprPktDropCountTablenot-accessiblecurrentThe RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1RowhpnicfRprPktDropCountEntrynot-accessiblecurrentAn entry in the RPR Packet Drop Count Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.1ColumnhpnicfRprPktDropCntIfIndexnot-accessiblecurrentThe ifIndex of this RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.2ColumnhpnicfRprPktDropCntRingletIDnot-accessiblecurrentThe RPR Ringlet of the station through which the packets transmit.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.3ColumnhpnicfRprDownFlowClassAPktDropsread-onlycurrentThe total dropped number of Class A packets which transmit down from the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.4ColumnhpnicfRprUpFlowClassAPktDropsread-onlycurrentThe total dropped number of Class A packets which transmit up to the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.5ColumnhpnicfRprDownFlowClassBPktDropsread-onlycurrentThe total dropped number of Class B packets which transmit down from the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.6ColumnhpnicfRprUpFlowClassBPktDropsread-onlycurrentThe total dropped number of Class B packets which transmit up to the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.7ColumnhpnicfRprDownFlowClassCPktDropsread-onlycurrentThe total dropped number of Class C packets which transmit down from the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.8ColumnhpnicfRprUpFlowClassCPktDropsread-onlycurrentThe total dropped number of Class C packets which transmit up to the host.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4NodehpnicfRprRS
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1TablehpnicfRprStaticRSTablenot-accessiblecurrentThe RPR Static Ring Selection table contains the static ring selection information by the way of configuration.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1RowhpnicfRprStaticRSEntrynot-accessiblecurrentAn entry in the RPR Static Ring Selection table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.1ColumnhpnicfRprStaticRSIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.2ColumnhpnicfRprStaticRSMacAddressnot-accessiblecurrentThe MAC address of the station on the ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.3ColumnhpnicfRprStaticRSRingletIDread-createcurrentThe identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.4ColumnhpnicfRprStaticRSTtlread-onlycurrentThe hops from source station to destination station by the selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.5ColumnhpnicfRprStaticRSValidread-onlycurrentThe flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.6ColumnhpnicfRprStaticRSRowStatusread-createcurrentThe status of this table entry. The status includes createAndGo, active and destroy.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2TablehpnicfRprIpv4DynamicRSTablenot-accessiblecurrentThe RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1RowhpnicfRprIpv4DynamicRSEntrynot-accessiblecurrentAn entry in the RPR Ipv4Dynamic Ring Selection Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.1ColumnhpnicfRprIpv4DynamicRSIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.2ColumnhpnicfRprIpv4DynamicRSMacAddressnot-accessiblecurrentThe Ipv4 MAC address of destination station on the ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.3ColumnhpnicfRprIpv4DynamicRSRingletIDread-onlycurrentThe identifier of the ring which frames are sent from the source station to the destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.4ColumnhpnicfRprIpv4DynamicRSTtlread-onlycurrentThe hops from source station to destination station by the selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3TablehpnicfRprIpv6DynamicRSTablenot-accessiblecurrentThe RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1RowhpnicfRprIpv6DynamicRSEntrynot-accessiblecurrentAn entry in the RPR Ipv6 Ring Selection Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.1ColumnhpnicfRprIpv6DynamicRSIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.2ColumnhpnicfRprIpv6DynamicRSMacAddressnot-accessiblecurrentThe Ipv6 MAC address of the destination station on the ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.3ColumnhpnicfRprIpv6DynamicRSRingletIDread-onlycurrentThe identifier of the ring which frames are sent from the source station to the destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.4ColumnhpnicfRprIpv6DynamicRSTtlread-onlycurrentThe hops from source station to destination station by selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4TablehpnicfRprIpv4OverallRSTablenot-accessiblecurrentThe RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1RowhpnicfRprIpv4OverallRSEntrynot-accessiblecurrentAn entry in the RPR Overall Ring Selection Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.1ColumnhpnicfRprIpv4OverallRSIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.2ColumnhpnicfRprIpv4OverallRSMacAddressnot-accessiblecurrentThe MAC address of the destination station on the ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.3ColumnhpnicfRprIpv4OverallRSTyperead-onlycurrentThe ring selection item type indicates static or dynamic.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.4ColumnhpnicfRprIpv4OverallRSRingletIDread-onlycurrentThe identifier of the ring which frames are sent from the source station to the destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.5ColumnhpnicfRprIpv4OverallRSTtlread-onlycurrentThe hops from source station to destination station by selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5TablehpnicfRprVrrpRSTablenot-accessiblecurrentThe RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1RowhpnicfRprVrrpRSEntrynot-accessiblecurrentAn entry in the RPR VRRP Ring Selection Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.1ColumnhpnicfRprVrrpRSIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.2ColumnhpnicfRprVrrpRSVirtualMacAddressnot-accessiblecurrentThe virtual MAC address of the staion in VRRP group.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.3ColumnhpnicfRprVrrpRSMacAddressread-onlycurrentThe MAC address of the station that is the master in VRRP group.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.4ColumnhpnicfRprVrrpRSRingletIDread-onlycurrentThe identifier of the ring which frames are sent from the source station to the destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.5ColumnhpnicfRprVrrpRSTtlread-onlycurrentThe hops from source station to destination station by selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6TablehpnicfRprDefaultRingIDTablenot-accessiblecurrentThe RPR Default RingID Table specify the default ringID.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1RowhpnicfRprDefaultRingIDEntrynot-accessiblecurrentAn entry in the RPR Default RingID Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.1ColumnhpnicfRprDefaultRingIDIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.2ColumnhpnicfRprDefaultConfigRingletIDread-writecurrentThe default identifier of the ring configured by user.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.3ColumnhpnicfRprDefaultActiveRingIDread-onlycurrentThe identifier of the default ring which is active currently. The default ring configured by user may be inactive.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.5NodehpnicfRprDefect
1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1TablehpnicfRprDefectReportTablenot-accessiblecurrentThe RPR Defect Report Table that contains the trap information on the ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1RowhpnicfRprDefectReportEntrynot-accessiblecurrentAn entry in the RPR Defect Report Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.1ColumnhpnicfRprDefectIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.2ColumnhpnicfRprDefectCurrentStatusread-onlycurrentIndicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6NodehpnicfRprPriorityMap
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1TablehpnicfRprPriority2ClassMapTablenot-accessiblecurrentThe Table is for Class Of Service and RPR Service Class Mapping.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1RowhpnicfRprPriority2ClassMapEntrynot-accessiblecurrentAn entry in the COS to Service Class Map Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.1ColumnhpnicfRprPriority2ClassMapIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.2ColumnhpnicfRprPriority2ClassMapTypenot-accessiblecurrentThe type of Priority,include tag, mpls, ip.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.3ColumnhpnicfRprPriorityValuenot-accessiblecurrentThe priority of tag,mpls and ip, the value range is 0~7.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.4ColumnhpnicfRprPriority2ClassMapread-writecurrentThe RPR service class.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7NodehpnicfRprRateLimitConfig
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1TablehpnicfRprRateLimitConfigTablenot-accessiblecurrentThe RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1RowhpnicfRprRateLimitConfigEntrynot-accessiblecurrentAn entry in the RPR Rate Limit Configuration Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.1ColumnhpnicfRprRateLimitConfigIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.2ColumnhpnicfRprRateLimitConfigRingletIdnot-accessiblecurrentThe identifier of the ring of RPR ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.3ColumnhpnicfRprRateLimitConfigServiceClassnot-accessiblecurrentThe RPR service class.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.4ColumnhpnicfRprRateLimitConfigValueread-writecurrentThe value of rate-limit that configured for diffrent service class. The unit is permillage.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8NodehpnicfRprMacAddrLearn
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1TablehpnicfRprMacLearnCfgTablenot-accessiblecurrentThe RPR MAC Address Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1RowhpnicfRprMacLearnCfgEntrynot-accessiblecurrentThe entry of RPR MAC Address Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.1ColumnhpnicfRprMacLearnIfIndexnot-accessiblecurrentThe ifIndex of RPR interface.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.2ColumnhpnicfRprMacLearnRprMacnot-accessiblecurrentThe MAC address of the RPR station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.3ColumnhpnicfRprMacLearnTyperead-createcurrentThe type of MAC address item that the user built. The type includes static and dynamic.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.4ColumnhpnicfRprMacLearnDestMacread-createcurrentThe destination of MAC address.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.5ColumnhpnicfRprMacLearnVlanIdread-createcurrentThe vlan ID that the MAC address learned from by RPR staion.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.6ColumnhpnicfRprMacLearnRingletread-createcurrentThe identifier of the ring which frames are sent from the source station to the destination station.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.7ColumnhpnicfRprMacLearnTtlread-onlycurrentThe hops from source station to destination station on the selected ringlet.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.8ColumnhpnicfRprMacLearnIsValidread-onlycurrentThe flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.9ColumnhpnicfRprMacLearnRowStatusread-createcurrentThe status of this table entry. The status includes createAndGo, active and destroy.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9NodehpnicfRprTrapVar
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1TablehpnicfRprTrapVarTablenot-accessiblecurrentThe RPR Defect Report Table that contains varible that used to bind in trap.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1RowhpnicfRprTrapVarEntrynot-accessiblecurrentAn entry in the RPR Trap Var Table.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.1ColumnhpnicfRprTrapIfIndexaccessible-for-notifycurrentThe ifIndex of RPR interface. It is only used for trap to bind.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.2ColumnhpnicfRprTrapRingletaccessible-for-notifycurrentThe span of RPR station. It is only used for trap to bind.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.3ColumnhpnicfRprTrapTopoMacAddressaccessible-for-notifycurrentThe MAC address of RPR station. It is only used for trap to bind.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.4ColumnhpnicfRprTrapIpAddressaccessible-for-notifycurrentThe IP address of RPR station. It is only used for trap to bind.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10NodehpnicfRprTrap
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.1NotificationhpnicfRprTopologyOpenRingcurrentThe topology openRing trap indicates that the RPR ring is opened.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.2NotificationhpnicfRprTopologyCloseRingcurrentThe topology openRing trap indicates that the RPR ring is closed.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.3NotificationhpnicfRprTopologyInconsistentcurrentThe topology inconsistent trap indicates that the topology of RPR is inconsistent.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.4NotificationhpnicfRprTopologyInstabilitycurrentThe topology instability trap indicates that the topology of RPR is instability.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.5NotificationhpnicfRprDuplicateMacAddresscurrentThe duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two st…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.6NotificationhpnicfRprDulplicateIPAddresscurrentThe dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stat…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.7NotificationhpnicfRprIncompleteLRTTcurrentThe incomplete LRTT trap indicates that LRTT is not completed.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.8NotificationhpnicfRprProtecConfigInconsistentcurrentThe protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configur…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.9NotificationhpnicfRprJumboConfigInconsistentcurrentThe jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame …
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.10NotificationhpnicfRprExceedMaxReservRatecurrentThe exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every s…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.11NotificationhpnicfRprExceedMaxStationNumcurrentThe exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.12NotificationhpnicfRprMiscablingcurrentThe miscabling trap indicates that the miscabling event occurred.
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.13NotificationhpnicfRprBackPressurecurrentThe back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit confi…
1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.14NotificationhpnicfRprBackPressureOvercurrentThe back pressure over trap indicates that the backpressure is disappeared on the ringlet.
Type Definitions
NameSyntaxStatusDescription
HpnicfRprRingletIDINTEGER { ringlet0(1), ringlet1(2) }currentIndicates the path on which data flow is selected. The valid value is ringlet0 and ringlet1. They indicate two RPR fiber rings. Ringlet0 refers to outer ring and ringlet1 refers to inner ring.
HpnicfRprServiceClassINTEGER { classC(1), classB(2), classA1(3), classA0(4) }currentIndicates the service class of RPR. The valid value is ClassC, ClassB, ClassA1 and ClassA0.
MIB Viewer