HUAWEI-ANCP-AN-MIB
65 objects
The MIB module is for entities implementing the access node side of the Access Node Control Protocol (ANCP). Copyright (C) The IETF Trust (2008). The initial version of this MIB module was published in RFC yyyy; for full legal notices see the RFC itself.
Imported Objects
| GSMP-MIB | GsmpNameType GsmpPartitionIdType GsmpVersion |
| HUAWEI-ANCP-TC-MIB | AncpSessionCapabilities GsmpSubVersion |
| HUAWEI-MIB | huaweiMgmt |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| Q-BRIDGE-MIB | VlanIdOrNone |
| RMON2-MIB | ZeroBasedCounter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.106 | IdentityhwAncpAnMIB | The MIB module is for entities implementing the access node side of the Access Node Control Protocol (ANCP). Copyright (C) The IETF Trust (2008). The initial v… | ||
| 1.3.6.1.4.1.2011.5.106.0 | NodeancpAnNotifications | |||
| 1.3.6.1.4.1.2011.5.106.0.1 | NotificationancpAnSessionDown | current | This notification is generated whenever an ANCP session goes down. A session can go down for several reasons: 1) The ANCP session can be deleted by a manager f… | |
| 1.3.6.1.4.1.2011.5.106.0.2 | NotificationancpAnSessionUp | current | This notification is generated when an ANCP session enters the estab state as given by ancpAnCurrentSessionState. Since ancpAnCurrentSessionAnInstance identifi… | |
| 1.3.6.1.4.1.2011.5.106.1 | NodeancpAnObjects | |||
| 1.3.6.1.4.1.2011.5.106.1.1 | ScalarancpAnPartitionsUsed | read-write | current | This object allows the manager to specify whether or not to use the 'Partition ID' field in the GSMP message header. When set to 'false' the application does n… |
| 1.3.6.1.4.1.2011.5.106.1.2 | ScalarancpAnNextSessionId | read-only | current | The object reports the next index (potential value of ancpAnSessionConfigSessionId) which is available for creating a new row in ancpAnSessionConfigTable. If n… |
| 1.3.6.1.4.1.2011.5.106.1.3 | TableancpAnSessionConfigTable | not-accessible | current | This table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created) before an ANCP session might be started. |
| 1.3.6.1.4.1.2011.5.106.1.3.1 | RowancpAnSessionConfigEntry | not-accessible | current | An entry in the table showing the data for a specific actual or yet to be established session. If partitions are used, one session corresponds to one specific … |
| 1.3.6.1.4.1.2011.5.106.1.3.1.1 | ColumnancpAnSessionConfigSessionId | not-accessible | current | An index of a session referred by this row. The index is unique across all partitions. The referred session may be actually established or just potential. Prio… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.2 | ColumnancpAnSessionConfigRowStatus | read-create | current | An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this … |
| 1.3.6.1.4.1.2011.5.106.1.3.1.3 | ColumnancpAnSessionConfigGsmpVersion | read-create | current | The maximum version number of the GSMP protocol that may be used in this session. The value of this object is persistent. |
| 1.3.6.1.4.1.2011.5.106.1.3.1.4 | ColumnancpAnSessionConfigGsmpSubVersion | read-create | current | The maximum subversion number of the GSMP protocol that may be used in this session. The value of this object is persistent. |
| 1.3.6.1.4.1.2011.5.106.1.3.1.5 | ColumnancpAnSessionConfigEncapsulationType | read-create | current | Required encapsulation for this session. The value of this object is persistent. |
| 1.3.6.1.4.1.2011.5.106.1.3.1.6 | ColumnancpAnSessionConfigCapabilities | read-create | current | ANCP capabilities supported by the AN in this session. When all bits are set to zero then this means that no capabilities are supported. The value of this obje… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.7 | ColumnancpAnSessionConfigAliveTimer | read-create | current | The timer specifies the nominal time between periodic adjacency protocol messages generated by the access node. It is a constant for the duration of an ANCP se… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.8 | ColumnancpAnSessionConfigPortReportShaper | read-create | current | The timer specifies the nominal time between 2 EventReport messages related to the same port. It is a constant for the duration of a GSMP session. The timer is… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.9 | ColumnancpAnSessionConfigAggregateReportShaper | read-create | current | The timer specifies the nominal time between 2 EventReport messages related to any port. It is a constant for the duration of a GSMP session. The timer is spec… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.10 | ColumnancpAnSessionConfigTransportRetryTimer | read-create | current | The timer specifies the nominal time between 2 transport connection setup attempts done by the access node. The transport protocol is specified in ancpAnSessio… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.11 | ColumnancpAnSessionConfigAncpRetryTimer | read-create | current | The timer specifies the nominal time between 2 ANCP connection setup attempts. The timer is specified in units of 100ms. A value 0 means that the access node w… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.12 | ColumnancpAnSessionConfigAnName | read-create | current | The name of the access node. The first three octets must be an Organizationally Unique Identifier (OUI) that identifies the manufacturer of the access node. Th… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.13 | ColumnancpAnSessionConfigPartitionId | read-create | current | The Id for this session's specific access node partition. This object has a meaning only if partitions are used (ancpAnPartitionsUsed='true') and is ignored ot… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.14 | ColumnancpAnSessionConfigWindowSize | read-create | current | The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent … |
| 1.3.6.1.4.1.2011.5.106.1.3.1.15 | ColumnancpAnSessionConfigRelatedInterface | read-create | current | This object contains the value of an ifIndex object, defined in IF-MIB, indicating an interface corresponding to this session. The corresponding interface migh… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.16 | ColumnancpAnSessionConfigRelatedEntity | read-create | current | This object contains the name of an object instance uniquely identifying a lower layer entity associated with this session. For example, in the case where the … |
| 1.3.6.1.4.1.2011.5.106.1.3.1.17 | ColumnancpAnSessionConfigSvid | read-create | current | If the session is associated with a single VLAN, this object contains the VLAN ID of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero then the s… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.18 | ColumnancpAnSessionConfigSPrio | read-create | current | If the session is associated with a single VLAN, this object contains the priority value of the single VLAN tag. If ancpAnSessionConfigCvid is also nonzero the… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.19 | ColumnancpAnSessionConfigCvid | read-create | current | If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the VLAN ID of the inner VLAN tag (also called C-VLAN ID)… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.20 | ColumnancpAnSessionConfigCPrio | read-create | current | If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the priority value of the inner VLAN tag (also called C-V… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.21 | ColumnancpAnSessionConfigNasIpAddressType | read-create | current | The type of address in ancpAnSessionConfigNasIpAddress. The value of this object is persistent. |
| 1.3.6.1.4.1.2011.5.106.1.3.1.22 | ColumnancpAnSessionConfigNasIpAddress | read-create | current | The IP address used for the ANCP session peer (NAS). The type of this IP address attribute is determined by the value of ancpAnSessionConfigNasIpAddressType. T… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.23 | ColumnancpAnSessionConfigEncapPortNumber | read-create | current | The port number used for the transport protocol establishment to the ANCP peer. The transport protocol type is specified by ancpAnSessionConfigEncapsulationTyp… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.24 | ColumnancpAnSessionConfigNotifyDnEnable | read-create | current | This object specifies if ancpAnSessionDown notification should be generated when this session leaves the 'estab' state as given by ancpAnCurrentSessionState in… |
| 1.3.6.1.4.1.2011.5.106.1.3.1.25 | ColumnancpAnSessionConfigNotifyUpEnable | read-create | current | This object specifies if ancpAnSessionUp notification should be generated when this session goes to 'estab' state as given by ancpAnCurrentSessionState in the … |
| 1.3.6.1.4.1.2011.5.106.1.4 | TableancpAnCurrentSessionTable | not-accessible | current | This table gives actual information of the sessions in the access node. A row in this table is created when the corresponding row in the ancpAnSessionConfigTab… |
| 1.3.6.1.4.1.2011.5.106.1.4.1 | RowancpAnCurrentSessionEntry | not-accessible | current | An entry in the table showing the data for a specific actual session. |
| 1.3.6.1.4.1.2011.5.106.1.4.1.1 | ColumnancpAnCurrentSessionState | read-only | current | The state of this session. The null (1) state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the … |
| 1.3.6.1.4.1.2011.5.106.1.4.1.2 | ColumnancpAnCurrentSessionGsmpVersion | read-only | current | The actual version number of the GSMP protocol that is used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| 1.3.6.1.4.1.2011.5.106.1.4.1.3 | ColumnancpAnCurrentSessionGsmpSubVersion | read-only | current | The actual subversion number of the GSMP protocol that may be used in this session. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| 1.3.6.1.4.1.2011.5.106.1.4.1.4 | ColumnancpAnCurrentSessionAnName | read-only | current | The name of the access node used in this session. It should be the same as ancpAnSessionConfigAnName if that object is not set to zero. If ancpAnSessionConfigA… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.5 | ColumnancpAnCurrentSessionNasName | read-only | current | The name of the NAS as advertised in the adjacency message. The value of this object is set to the value of the 'Sender Name' field in the header of the ANCP m… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.6 | ColumnancpAnCurrentSessionAnIpAddressType | read-only | current | The type of address in ancpAnCurrentSessionAnIpAddress. |
| 1.3.6.1.4.1.2011.5.106.1.4.1.7 | ColumnancpAnCurrentSessionAnIpAddress | read-only | current | The IP address used for the access node. The type of this IP address attribute is determined by the value of ancpAnCurrentSessionAnIpAddressType. |
| 1.3.6.1.4.1.2011.5.106.1.4.1.8 | ColumnancpAnCurrentSessionAnInstance | read-only | current | The instance number used by the access node during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recen… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.9 | ColumnancpAnCurrentSessionNasInstance | read-only | current | The instance number used by the NAS during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past a… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.10 | ColumnancpAnCurrentSessionCapabilities | read-only | current | The common ANCP capabilities supported by the AN and NAS in this session. The object has the value 0 if no capabilities are supported or if ancpAnCurrentSessio… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.11 | ColumnancpAnCurrentSessionStartUptime | read-only | current | The value of sysUpTime when the session came to established state. This object has value 0 if ancpAnCurrentSessionState is not estab(4). |
| 1.3.6.1.4.1.2011.5.106.1.4.1.12 | ColumnancpAnCurrentSessionDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which session's counters suffered a discontinuity. If no such discontinuities have occurred since then, t… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.13 | ColumnancpAnCurrentSessionStatSentMessages | read-only | current | The number of messages that have been sent in this session by the access node. All ANCP messages pertaining to this session after the session came to establish… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.14 | ColumnancpAnCurrentSessionStatReceivedValidMessages | read-only | current | The number of messages that have been received and processed in this session by the access node. All ANCP messages pertaining to this session after the session… |
| 1.3.6.1.4.1.2011.5.106.1.4.1.15 | ColumnancpAnCurrentSessionStatDiscardedMessages | read-only | current | The number of messages that in this session have been received and discarded for whatever reason by the access node. All ANCP messages pertaining to this sessi… |
| 1.3.6.1.4.1.2011.5.106.1.5 | TableancpAnInterfaceConfigTable | not-accessible | current | This table configures the association of user facing interfaces to ANCP partitions in the access node. An entry in this table needs to be added by the agent fo… |
| 1.3.6.1.4.1.2011.5.106.1.5.1 | RowancpAnInterfaceConfigEntry | not-accessible | current | An entry in the table showing the partition id for a specific user facing interface |
| 1.3.6.1.4.1.2011.5.106.1.5.1.1 | ColumnancpAnInterfaceConfigPartitionId | read-write | current | A partition Id associated with the related ifIndex. Upon creation of the row, the value is set to '00'H. The value of this object is persistent. |
| 1.3.6.1.4.1.2011.5.106.2 | NodeancpAnConformance | |||
| 1.3.6.1.4.1.2011.5.106.2.1 | NodeancpAnGroups | |||
| 1.3.6.1.4.1.2011.5.106.2.1.1 | GroupancpAnConfigGroup | current | These objects apply to the configuration of ANCP sessions in access nodes. | |
| 1.3.6.1.4.1.2011.5.106.2.1.2 | GroupancpAnRelatedInterfaceGroup | current | This object contains the ifIndex of an interface defined in IF-MIB. If an ANCP session must be associated with an IP interface, then this group must be support… | |
| 1.3.6.1.4.1.2011.5.106.2.1.3 | GroupancpAnRelatedEntityGroup | current | This object contains the name of an object instance uniquely identifying a lower layer entity. If an ANCP session must be associated with an ATM PVC, then this… | |
| 1.3.6.1.4.1.2011.5.106.2.1.4 | GroupancpAnRelatedVlanGroup | current | These objects contains all VLAN-related configuration when the ANCP session is associated with a particular VLAN. If an ANCP session must be associated with a … | |
| 1.3.6.1.4.1.2011.5.106.2.1.5 | GroupancpAnCurrentGroup | current | These objects show the operational state of all ANCP sessions configured in the access node. | |
| 1.3.6.1.4.1.2011.5.106.2.1.6 | GroupancpAnInterfaceGroup | current | These objects are used to assign user facing interface to partitions. | |
| 1.3.6.1.4.1.2011.5.106.2.1.7 | GroupancpAnNotificationsGroup | current | These objects are used to enable or disable the generation of notifications by the access node about changes in the state of ANCP sessions. | |
| 1.3.6.1.4.1.2011.5.106.2.2 | NodeancpAnCompliances | |||
| 1.3.6.1.4.1.2011.5.106.2.2.1 | ComplianceancpAnModuleCompliance | current | The compliance statement for agents that support the ANCP MIB module for access nodes. |