HUAWEI-ATM-MIB
96 objects
This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI.
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.156 | IdentityhwAtmMIB | This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP li… | ||
| 1.3.6.1.4.1.2011.5.25.156.1 | NodehwAtmObjects | |||
| 1.3.6.1.4.1.2011.5.25.156.1.1 | TablehwAtmTable | not-accessible | current | This table is used to configure the parameters of the ATM interface. |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1 | RowhwAtmEntry | not-accessible | current | This table is used to configure the parameters of the ATM interface. |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.1 | ColumnhwAtmIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.11 | ColumnhwAtmIfType | read-only | current | Indicates the interface type. |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.12 | ColumnhwAtmClock | read-write | current | Master clock: uses the internal clock signal. Slave clock: uses the line clock signal. |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.13 | ColumnhwAtmFrameFormat | read-write | current | For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame… |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.14 | ColumnhwAtmScramble | read-write | current | By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. … |
| 1.3.6.1.4.1.2011.5.25.156.1.1.1.15 | ColumnhwAtmLoopback | read-write | current | Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload:… |
| 1.3.6.1.4.1.2011.5.25.156.1.2 | TablehwAtmMapPvpTable | not-accessible | current | This table is used to configure the mapping between the peer VPI and the local VPI. |
| 1.3.6.1.4.1.2011.5.25.156.1.2.1 | RowhwAtmMapPvpEntry | not-accessible | current | This table is used to configure the mapping between the peer VPI and the local VPI. |
| 1.3.6.1.4.1.2011.5.25.156.1.2.1.1 | ColumnhwAtmMapPvpIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.2.1.2 | ColumnhwAtmMapPvpVplVpi | not-accessible | current | Indicates the local VPI value. The value is an integer ranging from 0 to 255. |
| 1.3.6.1.4.1.2011.5.25.156.1.2.1.11 | ColumnhwAtmMapPvpRemoteVplVpi | read-create | current | Indicates the peer VPI value. The value is an integer ranging from 0 to 255. |
| 1.3.6.1.4.1.2011.5.25.156.1.2.1.51 | ColumnhwAtmMapPvpRowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.156.1.3 | TablehwAtmMapPvcTable | not-accessible | current | This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. |
| 1.3.6.1.4.1.2011.5.25.156.1.3.1 | RowhwAtmMapPvcEntry | not-accessible | current | This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI. |
| 1.3.6.1.4.1.2011.5.25.156.1.3.1.11 | ColumnhwAtmMapPvcRemoteVclVci | read-create | current | Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 2047. Generally, the values from 0 to 31 are reserved… |
| 1.3.6.1.4.1.2011.5.25.156.1.3.1.12 | ColumnhwAtmMapPvcRemoteVclVpi | read-create | current | Indicates the peer VPI value. The value is an integer ranging from 0 to 255. |
| 1.3.6.1.4.1.2011.5.25.156.1.3.1.51 | ColumnhwAtmMapPvcRowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.156.1.4 | TablehwAtmServiceTable | not-accessible | current | This table is used to configure the service type and related parameters for the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1 | RowhwAtmServiceEntry | not-accessible | current | This table is used to configure the service type for the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.1 | ColumnhwAtmServiceName | not-accessible | current | Indicates the name of the service type. The name is a string of 1 to 31 characters. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.11 | ColumnhwAtmServiceType | read-create | current | Set the service type for the PVC as required. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.12 | ColumnhwAtmServiceOutputPcr | read-create | current | Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.13 | ColumnhwAtmServiceOutputScr | read-create | current | Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.14 | ColumnhwAtmServiceOutputMbs | read-create | current | Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.15 | ColumnhwAtmServiceCbrCdvtValue | read-create | current | Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.16 | ColumnhwAtmServiceOutputMcr | read-create | current | Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0. |
| 1.3.6.1.4.1.2011.5.25.156.1.4.1.51 | ColumnhwAtmServiceRowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.156.1.5 | TablehwAtmPvcServiceTable | not-accessible | current | This table is used to configure the service type for the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.5.1 | RowhwAtmPvcServiceEntry | not-accessible | current | This table is used to configure the service type for the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.5.1.11 | ColumnhwAtmPvcServiceName | read-create | current | Indicates the name of the service type. The name is a string of 1 to 31 characters. |
| 1.3.6.1.4.1.2011.5.25.156.1.5.1.21 | ColumnhwAtmPvcTransmittalDirection | read-create | current | Indicates the input or output tpye of the service type. |
| 1.3.6.1.4.1.2011.5.25.156.1.5.1.51 | ColumnhwAtmPvcServiceRowStatus | read-create | current | This variable is used to create or delete an object. |
| 1.3.6.1.4.1.2011.5.25.156.1.11 | TablehwAtmIfConfTable | not-accessible | current | Indicates the configuration of the ATM interface. |
| 1.3.6.1.4.1.2011.5.25.156.1.11.1 | RowhwAtmIfConfEntry | not-accessible | current | Indicates the configuration of the ATM interface. |
| 1.3.6.1.4.1.2011.5.25.156.1.11.1.1 | ColumnhwAtmIfConfIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.11.1.11 | ColumnhwAtmIfConfMaxVccs | read-write | current | Indicates the maximum number of the PVCs. |
| 1.3.6.1.4.1.2011.5.25.156.1.11.1.12 | ColumnhwAtmIfConfOperVccs | read-only | current | Indicates the number of the configured PVCs. |
| 1.3.6.1.4.1.2011.5.25.156.1.11.1.13 | ColumnhwAtmIfConfIntfType | read-write | current | This object indicates the type of the serial interface with the ATM protocol. |
| 1.3.6.1.4.1.2011.5.25.156.1.12 | TablehwAtmVplTable | not-accessible | current | Indicates the configuration of the ATM PVP. |
| 1.3.6.1.4.1.2011.5.25.156.1.12.1 | RowhwAtmVplEntry | not-accessible | current | Indicates the configuration of the ATM PVP. |
| 1.3.6.1.4.1.2011.5.25.156.1.12.1.1 | ColumnhwAtmVplIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.12.1.2 | ColumnhwAtmVplVpi | not-accessible | current | VPI. |
| 1.3.6.1.4.1.2011.5.25.156.1.12.1.51 | ColumnhwAtmVplRowStatus | read-create | current | Indicates the status of the row. |
| 1.3.6.1.4.1.2011.5.25.156.1.13 | TablehwAtmVclTable | not-accessible | current | Indicates the configuration of the ATM PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1 | RowhwAtmVclEntry | not-accessible | current | Indicates the configuration of the ATM PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.1 | ColumnhwAtmVclIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.2 | ColumnhwAtmVclVpi | not-accessible | current | VPI. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.3 | ColumnhwAtmVclVci | not-accessible | current | VCI. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.11 | ColumnhwAtmVclName | read-create | current | Indicates the name of the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.12 | ColumnhwAtmVccAal5EncapsType | read-create | current | Indicates the encapsulation mode of AAL5. |
| 1.3.6.1.4.1.2011.5.25.156.1.13.1.51 | ColumnhwAtmVclRowStatus | read-create | current | Indicates the status of the row. |
| 1.3.6.1.4.1.2011.5.25.156.1.14 | TablehwAtmPvcIpoaTable | not-accessible | current | This table is used to configure the IPoA mapping on the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1 | RowhwAtmPvcIpoaEntry | not-accessible | current | This table is used to configure the IPoA mapping on the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.3 | ColumnhwAtmPvcIpoaType | not-accessible | current | Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route … |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.4 | ColumnhwAtmPvcIpoaIpAddress | not-accessible | current | Indicates the peer IP address mapped to the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.11 | ColumnhwAtmPvcIpoaIpMask | read-create | current | Indicates the IP address mask. The IP address mask is an optional parameter. |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.12 | ColumnhwAtmPvcIpoaInarpInterval | read-create | current | Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is … |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.13 | ColumnhwAtmPvcIpoaBroadcast | read-create | current | If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.14.1.51 | ColumnhwAtmPvcIpoaRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.2011.5.25.156.1.15 | TablehwAtmPvcBridgeTable | not-accessible | current | This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.15.1 | RowhwAtmPvcBridgeEntry | not-accessible | current | This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC. |
| 1.3.6.1.4.1.2011.5.25.156.1.15.1.11 | ColumnhwAtmPvcBridgeDstIfIndex | read-create | current | Indicates the index of the VE interface. |
| 1.3.6.1.4.1.2011.5.25.156.1.15.1.51 | ColumnhwAtmPvcBridgeRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.2011.5.25.156.1.17 | TablehwAtmPvcOamLoopbackTable | not-accessible | current | This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modif… |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1 | RowhwAtmPvcOAMLoopbackEntry | not-accessible | current | This table is used to configure OAM F5 Loopback. |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1.11 | ColumnhwAtmPvcOAMLoopbackFrequency | read-create | current | Indicates the interval for sending OAM F5 Loopback cells. |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1.12 | ColumnhwAtmPvcOAMLoopbackUpCount | read-create | current | Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up. |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1.13 | ColumnhwAtmPvcOAMLoopbackDownCount | read-create | current | Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down. |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1.14 | ColumnhwAtmPvcOAMLoopbackRetryFrequency | read-create | current | Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes. |
| 1.3.6.1.4.1.2011.5.25.156.1.17.1.51 | ColumnhwAtmPvcOAMLoopbackRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.2011.5.25.156.1.18 | TablehwAtmPvpLimitTable | not-accessible | current | This table is used to configure the VP limit. To monitor the VP, configure related VP parameters. |
| 1.3.6.1.4.1.2011.5.25.156.1.18.1 | RowhwAtmPvpLimitEntry | not-accessible | current | This table is used to configure the VP limit. |
| 1.3.6.1.4.1.2011.5.25.156.1.18.1.1 | ColumnhwAtmPvpLimitIfIndex | not-accessible | current | Indicates the interface index. |
| 1.3.6.1.4.1.2011.5.25.156.1.18.1.2 | ColumnhwAtmPvpLimitVpi | not-accessible | current | VPI. |
| 1.3.6.1.4.1.2011.5.25.156.1.18.1.11 | ColumnhwAtmPvpLimitPeakRate | read-create | current | VCI. |
| 1.3.6.1.4.1.2011.5.25.156.1.18.1.51 | ColumnhwAtmPvpLimitRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.2011.5.25.156.11 | NodehwAtmConformance | |||
| 1.3.6.1.4.1.2011.5.25.156.11.1 | NodehwAtmCompliances | |||
| 1.3.6.1.4.1.2011.5.25.156.11.1.1 | CompliancehwAtmCompliance | current | The compliance statement for systems supporting the HUAWEI-ATM-MIB. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2 | NodehwAtmGroups | |||
| 1.3.6.1.4.1.2011.5.25.156.11.2.1 | GrouphwAtmObjectGroup | current | The Atm attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.2 | GrouphwAtmIfConf | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.3 | GrouphwAtmVplObjectGroup | current | The Atm Pvc Bridge attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.4 | GrouphwAtmVclObjectGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.5 | GrouphwAtmMapPvpObjectGroup | current | The Atm Map Pvp attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.6 | GrouphwAtmMapPvcObjectGroup | current | The Atm Map Pvc attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.7 | GrouphwAtmServiceObjectGroup | current | The Atm Service attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.8 | GrouphwAtmPvcServiceObjectGroup | current | The Atm Pvc Service attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.9 | GrouphwAtmPvcIpoaObjectGroup | current | The Atm Pvc IPOA attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.10 | GrouphwAtmPvcBridgeObjectGroup | current | The Atm Pvl attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.11 | GrouphwAtmPvcOAMLoopbackObjectGroup | current | The Port attribute group. | |
| 1.3.6.1.4.1.2011.5.25.156.11.2.12 | GrouphwAtmPvpLimitObjectGroup | current | The Port attribute group. |