HUAWEI-CLK-MIB
258 objects
This MIB is used for defining clock management MIB objects.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwPortIndex hwSlotIndex hwSubslotIndex |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.25 | IdentityhwClk | This MIB is used for defining clock management MIB objects. | ||
| 1.3.6.1.4.1.2011.6.25.1 | NodehwClkMibObjects | |||
| 1.3.6.1.4.1.2011.6.25.1.1 | TablehwClockInManageTable | not-accessible | current | Clock Source Management Table. This table is used to add or delete the clock source and query the status of the clock source. The index of this table is hwClkI… |
| 1.3.6.1.4.1.2011.6.25.1.1.1 | RowhwClockInManageEntry | not-accessible | current | Clock Source Management Table. This table is used to add or delete the clock source and query the status of the clock source. The index of this entry is hwClkI… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.1 | ColumnhwClkInIndex | accessible-for-notify | current | Clock source index: ranging from 0 to 9. The value 255 indicates the local clock source. Range: 0-9 | 255 |
| 1.3.6.1.4.1.2011.6.25.1.1.1.2 | ColumnhwClkInPostion | read-create | current | The ifIndex of physical position of clock source. If the clock source isn't a sysline clock, the value will be 0xFFFFFFFFFFFFFF. The first byte indicates the N… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.3 | ColumnhwClkInWorkMode | read-create | current | Clock source type. Includes the line clock source, BITS clock source, and local surge source. If it is line clock source of a CES port, the clock source type m… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.4 | ColumnhwClkInOperStatus | read-only | current | Clock source state. Options: 1.none(1) - indicates that the clock source index isn't configured 2.normal(2) - indicates that the state of the clock source is a… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.5 | ColumnhwClkInRowStatus | read-create | current | Clock Source operation: A user can add a clock source or clear a clock source. After a user adds a clock source,the clock works in trace mode. After a user cle… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.6 | ColumnhwClkInBitsImpedance | read-create | current | BITS clock impedance type.The impedance value must be set when the clock source is a bits clock. Options: 1. bitsImpedance75ohm(1) - indicates that the impedan… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.7 | ColumnhwClkInBitsType | read-create | current | BITS clock type: Options: 1.bitsType2MHz(1) - indicates that the BITS clock type is 2MHz 2.bitsType2Mbps(2) - indicates that the BITS clock type is 2bps 3.bits… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.8 | ColumnhwClkInQL | read-create | current | Clock source quality level: Options: 1. qlPRC(2) - indicates that primary reference clock 2. qlSsuA(4) - indicates that the clock signal comes from class I or … |
| 1.3.6.1.4.1.2011.6.25.1.1.1.9 | ColumnhwClkInFaultRecord | read-only | current | Clock source fault record. Options: 1.noFaultRecord(1) - indicates that there is no fault record 2.faultRecord(2) - indicates that the clock source had a fault… |
| 1.3.6.1.4.1.2011.6.25.1.1.1.10 | ColumnhwClkInClearFaultRecord | read-create | current | Clear fault record of one clock source. Options: 1.clearFaultRecord(1) -Clears fault records |
| 1.3.6.1.4.1.2011.6.25.1.1.1.11 | ColumnhwClkLockState | read-only | current | Clock lock state. Options: 1.locked(1) - indicates that the clock is locked 2.unlocked(2) - indicates that the clock is unlocked |
| 1.3.6.1.4.1.2011.6.25.1.1.1.12 | ColumnhwClkFreqDeviation | read-only | current | Clock source freq-deviation-value The value is ten times of actual frequency deviation value Unit: 0.1ppm The invalid value is 0x7fffffff |
| 1.3.6.1.4.1.2011.6.25.1.2 | TablehwClockOutManageTable | not-accessible | current | Clock Out Management Table. This table is used to configure and query the priority of the clock source, and query the index of the currently-output clock sourc… |
| 1.3.6.1.4.1.2011.6.25.1.2.1 | RowhwClockOutManageEntry | not-accessible | current | Clock Out Management Table. This table is used to configure and query the priority of the clock source, and query the index of the currently-output clock sourc… |
| 1.3.6.1.4.1.2011.6.25.1.2.1.1 | ColumnhwClkOutIndex | not-accessible | current | Index of clock out table. Its meaning is the same as hwClkOutType. The clock out index must be 8k in UA system and must be SDH or TDM in MD/MA system during th… |
| 1.3.6.1.4.1.2011.6.25.1.2.1.2 | ColumnhwClkOutType | read-only | current | Clock out type. Currently, there are seven types: SDH, TDM, system, 19 MHzm, systemObsolete, external and external1. Options: 1.sdh(1) - indicates that output … |
| 1.3.6.1.4.1.2011.6.25.1.2.1.3 | ColumnhwClkOutPriority | read-write | current | Clock source priority. The priority ranges from 0 to 9 in a descending order. If the value is 255 in the get operation, it indicates that the priority of the c… |
| 1.3.6.1.4.1.2011.6.25.1.2.1.4 | ColumnhwClkOutWorkMode | read-only | current | Clock out working mode. Options: 1.trace(1) - indicates that the clock is working in tracing mode 2.surge(2) - indicates that the clock is working in surge mod… |
| 1.3.6.1.4.1.2011.6.25.1.2.1.5 | ColumnhwClkOutOperStatus | read-only | current | Clock source Out state. It indicates whether the clock source is the output clock of the system: 1 indicates yes, and 2 indicates no. Options: 1.yes(1) - indic… |
| 1.3.6.1.4.1.2011.6.25.1.3 | NodehwSystemClockManagePara | |||
| 1.3.6.1.4.1.2011.6.25.1.3.1 | ScalarhwUASystemWorkMode | read-write | current | UA work mode. Options: 1.olt(1) - indicates that the UA system works as an OLT in VPRING 2.onu(2) - indicates that the UA system works as an ONU in VPRING |
| 1.3.6.1.4.1.2011.6.25.1.3.2 | Scalarhw3rdClkSubBoardWorkMode | read-only | current | Working mode of 3rd sub-board clock. Options: 1. trace(1) - indicates that the clock is working in tracing mode 2. keep(2) - indicates that the clock is workin… |
| 1.3.6.1.4.1.2011.6.25.1.3.3 | ScalarhwSystemClockMode | read-only | current | System clock mode. Options: 1. clockClksubboard(1) - indicates the clock-subboard supply output clock 2. clockLocalboard(2) - indicates the local-board supply … |
| 1.3.6.1.4.1.2011.6.25.1.3.4 | Scalarhw3rdClkSubBoardInputStatus | read-only | current | Clock-subboard clock input status. Options: 1.none(1) - indicates that the clock-subboard has no clock-signal input 2.normal(2) - indicates that the clock-sign… |
| 1.3.6.1.4.1.2011.6.25.1.3.5 | Scalarhw3rdClkSubBoardOutputStatus | read-only | current | Clock-subboard clock output status. Options: 1.normal(1) - indicates that the clock-subboard output status is normal 2.fault(2) - indicates thaclock-subboard o… |
| 1.3.6.1.4.1.2011.6.25.1.3.6 | ScalarhwClockSelectionMode | read-write | current | Clock selection mode. Options: 1.qlDisable(1) - indicates that a clock source is selected based on its priority 2.qlEnable(2) - indicates that a clock source i… |
| 1.3.6.1.4.1.2011.6.25.1.3.8 | ScalarhwClkRevertiveMode | read-write | current | Clock revertive mode. Options: 1.revertive(1) - Though a clock source had fault record, it still can be selected as the system clock 2.nonRevertive(2)- If one … |
| 1.3.6.1.4.1.2011.6.25.1.3.9 | Scalarhw1588ClkType | read-write | current | The 1588 clock type of device. Options: 1. oc(1) - indicates that 1588 clock type is Ordinary Clock 2. bc(2) - indicates that 1588 clock type is Boundary Clock… |
| 1.3.6.1.4.1.2011.6.25.1.3.10 | Scalarhw1588ClkPEmode | read-write | obsolete | The 1588 clock PE-mode of device. Options: 1. p2p(1) - indicates that the 1588 clock works in P2P mode 2. e2e(2) - indicates that the 1588 clock works at E2E m… |
| 1.3.6.1.4.1.2011.6.25.1.3.11 | Scalarhw1588ClkID | read-write | current | The 1588 clock identity of device. The first 4 bytes must be 0x259e40 for an OLT. The first 4 bytes must be 0x259e41 for a MxU. |
| 1.3.6.1.4.1.2011.6.25.1.3.12 | ScalarhwExtClkoutputThresholdSsmQl | read-write | current | Clock source quality level. Options: 1. qlPRC(2) - primary reference clock 2. qlSsuA(4) - indicates that the clock signal comes from class I or class V sub-clo… |
| 1.3.6.1.4.1.2011.6.25.1.3.13 | ScalarhwExtClkOutputMode | read-write | current | The mode of external clock output. Options: 1.fixTrace(1) -Output system clock 2.autoTrace(2) -indicates that external clock output automatically 3.noTrace(3) … |
| 1.3.6.1.4.1.2011.6.25.1.3.14 | ScalarhwClkWaitRestoreTime | read-write | current | If the clock state changes from failed to normal, wait the specified time to join clock source selection. Defined in G.781: wait restore time. Unit:minute Defa… |
| 1.3.6.1.4.1.2011.6.25.1.3.15 | ScalarhwClkHoldoffTime | read-write | current | If the clock state changes from normal to failed, wait the specified time to mark the failed state. Unit:second. Default value: 0 second Range: 0 - 1 0 - 0 sec… |
| 1.3.6.1.4.1.2011.6.25.1.3.16 | ScalarhwQlOutputUpperLimit | read-write | current | System output clock signal with a lower quality than the limited value. Options: 1.qlPRC(2) - indicates that the quality of the system output clock signal is l… |
| 1.3.6.1.4.1.2011.6.25.1.3.17 | ScalarhwPTPEnable | read-write | current | Enable or disable the 1588 function. Options: 1.enable(1) - Enable the 1588 function 2.disable(2) - Disable the 1588 function Default: disable(2) |
| 1.3.6.1.4.1.2011.6.25.1.3.18 | ScalarhwExtClkOutputBitsType | read-write | current | Get or set output signal of GPIO board. Default to bitsType2Mbps(2). Options: 1. bitsType2MHz (1) - indicates that the output signal of the GPIO board is bitsT… |
| 1.3.6.1.4.1.2011.6.25.1.3.19 | ScalarhwQlInputLowerLimit | read-write | current | Clock source quality level: Options: 1. qlPRC(2) - indicates that primary reference clock 2. qlSsuA(4) - indicates that the clock signal comes from class I or … |
| 1.3.6.1.4.1.2011.6.25.1.3.20 | ScalarhwPtpDomain | read-write | current | PTP domain value. BC: Range: 0-255 Default: 0 T-BC: Range: 24-43 Default: 24 |
| 1.3.6.1.4.1.2011.6.25.1.3.21 | ScalarhwPtpBMCEnable | read-write | current | PTP BMC switch. BC: Options: 1. enable(1) - indicates that ptp BMC is enabled 2. disable(2) - indicates that ptp BMC is disabled Default: disable(2) T-BC: enab… |
| 1.3.6.1.4.1.2011.6.25.1.3.22 | ScalarhwPtpLockState | read-only | current | PTP lock state. Options: 1. locked(1) - indicates that the clock is locked 2. unlocked(2) - indicates that the clock is unlocked |
| 1.3.6.1.4.1.2011.6.25.1.3.23 | ScalarhwPtpFreqLockStatus | read-only | current | PTP frequency lock state. Options: 1. locked(1) - indicates that the frequency is locked 2. unlocked(2) - indicates that the frequency is unlocked |
| 1.3.6.1.4.1.2011.6.25.1.3.24 | ScalarhwPtpTimeScale | read-only | current | The time scale of the grandmaster clock. |
| 1.3.6.1.4.1.2011.6.25.1.3.25 | ScalarhwPtpFrequencyTraceable | read-only | current | The value is true if the frequency determinning the timescale is traceable to a primary reference, otherwise the value is false. |
| 1.3.6.1.4.1.2011.6.25.1.3.26 | ScalarhwPtpTimeTraceable | read-only | current | The value is ture if the time is traceable to a primary reference. otherwise the value is false. |
| 1.3.6.1.4.1.2011.6.25.1.3.27 | ScalarhwPtpGMClockID | read-only | current | Grand master clock ID. |
| 1.3.6.1.4.1.2011.6.25.1.3.28 | ScalarhwPtpGrandMasterClockPriority1 | read-only | current | Grand master clock priority1. |
| 1.3.6.1.4.1.2011.6.25.1.3.29 | ScalarhwPtpGrandMasterClockPriority2 | read-only | current | Grand master clock priority2. |
| 1.3.6.1.4.1.2011.6.25.1.3.30 | ScalarhwPtpGrandMasterClockAccuracy | read-only | current | Grand master clock accuracy. |
| 1.3.6.1.4.1.2011.6.25.1.3.31 | ScalarhwPtpGrandMasterClockClass | read-only | current | Grand master clock class. |
| 1.3.6.1.4.1.2011.6.25.1.3.32 | ScalarhwPtpGrandMasterClockTimeSource | read-only | current | Indicates the source of time used by the grandmaster clock. |
| 1.3.6.1.4.1.2011.6.25.1.3.33 | ScalarhwPtpPhyPhaseSubCur | read-only | current | PTP physics phase current warp. |
| 1.3.6.1.4.1.2011.6.25.1.3.34 | ScalarhwPtpPhyPhaseSubMin | read-only | current | PTP physics phase min warp. |
| 1.3.6.1.4.1.2011.6.25.1.3.35 | ScalarhwPtpPhyPhaseSubMax | read-only | current | PTP physics phase max warp. |
| 1.3.6.1.4.1.2011.6.25.1.3.36 | ScalarhwPtpPhyPhaseSubMean | read-only | current | PTP physics phase mean warp. |
| 1.3.6.1.4.1.2011.6.25.1.3.37 | ScalarhwPtpTimeSyncOffsetCur | read-only | current | PTP current time offset. |
| 1.3.6.1.4.1.2011.6.25.1.3.38 | ScalarhwPtpTimeSyncOffsetMin | read-only | current | PTP min time offset. |
| 1.3.6.1.4.1.2011.6.25.1.3.39 | ScalarhwPtpTimeSyncOffsetMax | read-only | current | PTP max time offset. |
| 1.3.6.1.4.1.2011.6.25.1.3.40 | ScalarhwPtpTimeSyncOffsetMean | read-only | current | PTP average time offset. |
| 1.3.6.1.4.1.2011.6.25.1.3.41 | ScalarhwPtpTimeMeanpathdelayCur | read-only | current | PTP current path delay. |
| 1.3.6.1.4.1.2011.6.25.1.3.42 | ScalarhwPtpTimeMeanpathdelayMin | read-only | current | PTP min path delay. |
| 1.3.6.1.4.1.2011.6.25.1.3.43 | ScalarhwPtpTimeMeanpathdelayMax | read-only | current | PTP max path delay. |
| 1.3.6.1.4.1.2011.6.25.1.3.44 | ScalarhwPtpTimeMeanpathdelayMean | read-only | current | PTP average path delay. |
| 1.3.6.1.4.1.2011.6.25.1.3.45 | ScalarhwPtpDlyMeasureEnable | read-write | current | PTP asymmetry measure switch. Options: 1. enable(1) - indicates that ptp asymmetry measure is enabled 2. disable(2) - indicates that ptp asymmetry measure is d… |
| 1.3.6.1.4.1.2011.6.25.1.3.46 | ScalarhwPtpParentClockID | read-only | current | PTP parent clockID. |
| 1.3.6.1.4.1.2011.6.25.1.3.47 | ScalarhwPtpParentPortNumber | read-only | current | PTP parent portnumber. |
| 1.3.6.1.4.1.2011.6.25.1.3.48 | ScalarhwExtClkOutputState | read-only | current | External clock output state. Options: 1. on(1) - indicates that the output of external clock is opened 2. off(2) - indicates that the output of external clock … |
| 1.3.6.1.4.1.2011.6.25.1.3.49 | ScalarhwPtpLocalSourceLocalPriority | read-write | current | In T-BC mode, the local priority is configured to calculate the optimum master clock. The smaller the value, the higher the priority. Range: 1-255 Default: 128… |
| 1.3.6.1.4.1.2011.6.25.1.3.50 | ScalarhwPtpLocalSourcePriority2 | read-write | current | In T-BC mode, the priority2 is configured to calculate the optimum master clock. The smaller the value, the higher the priority. This attribute is invalid in B… |
| 1.3.6.1.4.1.2011.6.25.1.4 | TablehwClockOutPortManageTable | not-accessible | current | Clock output port management table. This table is used to enable or disable the output port and query the status of the output port. The index of this table is… |
| 1.3.6.1.4.1.2011.6.25.1.4.1 | RowhwClockOutPortManageEntry | not-accessible | current | Clock output port management table. This table is used to enable or disable the output port and query the status of the output port. The index of this entry is… |
| 1.3.6.1.4.1.2011.6.25.1.4.1.1 | ColumnhwClkOutputPostion | read-create | current | The index of physical position of the clock source. The highest byte is useless. The second byte describes the frame ID. The third byte describes the slot ID. … |
| 1.3.6.1.4.1.2011.6.25.1.4.1.2 | ColumnhwClkOutPortEnable | read-create | current | Clock output port switch. Options: 1. enable(0) - indicates that clock source output of this BITS port is enabled 2. disable(1) - indicates that clock source o… |
| 1.3.6.1.4.1.2011.6.25.1.4.1.3 | ColumnhwSsmQlOutPortEnable | read-create | current | SSM QL output mode. Options: 1.enable(1) - indicates that SSM QL output of the port is enabled 2.disable(2) - indicates that SSM QL output of the port is disab… |
| 1.3.6.1.4.1.2011.6.25.1.5 | TablehwClock1588ManageTable | not-accessible | current | Clock 1588 source management table. This table is used to manage the 1588 clock source. The index of this table is hw1588ClkInIndex, which is the ID of the 158… |
| 1.3.6.1.4.1.2011.6.25.1.5.1 | RowhwClock1588ManageEntry | not-accessible | current | Clock 1588 source management table. This table is used to manage the 1588 clock source. The index of this entry is hw1588ClkInIndex, which is the ID of the 158… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.1 | Columnhw1588ClkInIndex | accessible-for-notify | current | Clock 1588 source index. Range: 0-9 |
| 1.3.6.1.4.1.2011.6.25.1.5.1.2 | Columnhw1588ClkInPostion | read-create | current | The index of physical position of clock 1588 source. The highest byte is useless. The second byte describes the frame ID. The third byte describes the slot ID.… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.3 | Columnhw1588ClkPriority | read-create | current | Clock 1588 source priority. The priority ranges from 0 to 9 in a descending order.If the value is 255 in the get operation, it indicates that the priority of t… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.4 | Columnhw1588ClkInOperStatus | read-only | current | Clock 1588 source status: Options: 1.none(1) - indicates that the clock source index is not configured 2.normal(2) - indicates that the status of clock source … |
| 1.3.6.1.4.1.2011.6.25.1.5.1.5 | Columnhw1588ClkInRowStatus | read-create | current | Clock 1588 source operation includes adding and deleting clock 1588 source. If the value is set to 4, it indicates that a clock 1588 source is created. If the … |
| 1.3.6.1.4.1.2011.6.25.1.5.1.6 | Columnhw1588ClkReqSendTimeInterval | read-create | obsolete | 1588 Req send time interval. Options: 1.1/1024s( 1) - indicates that the time interval is 1/1024s 2.1/512s( 2) - indicates that the time interval is 1/512s 3.1… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.7 | Columnhw1588ClkDomainNumber | read-create | obsolete | 1588 clock domain number: Range: 0-255 Default: 0 |
| 1.3.6.1.4.1.2011.6.25.1.5.1.8 | Columnhw1588ClkPtpPEMode | read-create | obsolete | PTP MODE,default value is e2e(2). Options: 1. p2p(1) - indicates that the 1588 clock Ptp Pe Mode is p2p 2. e2e(2) - indicates that the 1588 clock Ptp Pe Mode i… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.9 | Columnhw1588ClkPtpMsgFormat | read-create | obsolete | PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.10 | Columnhw1588ClkPtpLineWarpMode | read-create | obsolete | PTP line warp mode, the default value is length(1). Options: 1. length(1) - indicates that the warp is represented by length 2. time(2) - indicates that the wa… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.11 | Columnhw1588ClkPtpLineWarpDirect | read-create | obsolete | PTP line warp direct, the default value is positive(1). Options: 1. positive(1) - indicates that the warp is in the positive direction 2. negative(2) - indicat… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.12 | Columnhw1588ClkPtpLineWarpValue | read-create | obsolete | PTP Line Warp Value: IF warp mode is length(1), the range is 0~14562m. If warp mode is time(2), the range is 0~65529 ns. |
| 1.3.6.1.4.1.2011.6.25.1.5.1.13 | Columnhw1588ClkPtpTimeSourceID | read-create | obsolete | PTP source port ID: It is 10 bytes in length and the default value is 0. |
| 1.3.6.1.4.1.2011.6.25.1.5.1.14 | Columnhw1588ClkPtpVlan | read-create | obsolete | PTP Vlan: Range: 0-4094. Default: 1. |
| 1.3.6.1.4.1.2011.6.25.1.5.1.15 | Columnhw1588ClkPtpInfoMode | read-create | obsolete | PTP info mode,default value is multicast(1). Options: 1. multicast(1) - indicates that the PTP info mode is multicast. 2. unicast(2) - indicates that the PTP i… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.16 | Columnhw1588ClkPtpAnnounceTimeout | read-create | obsolete | Announce timeout: Range: 1-1048576 ms Range: 1 - 1048576 Default: 128 ms |
| 1.3.6.1.4.1.2011.6.25.1.5.1.17 | Columnhw1588ClkGMClockID | read-only | obsolete | Grandmaster clock ID. |
| 1.3.6.1.4.1.2011.6.25.1.5.1.18 | Columnhw1588ClkAnnounceSendTimeInterval | read-create | obsolete | 1588 announce send time interval,the default value is 1/8s(8). Options: 1. 1/1024s(1) - indicates that the time interval is 1/1024s 2. 1/512s (2) - indicates t… |
| 1.3.6.1.4.1.2011.6.25.1.5.1.19 | Columnhw1588ClkSyncSendTimeInterval | read-create | obsolete | 1588 sync send time interval,the default value is 1/8s(8). Options: 1. 1/1024s(1) - indicates that the time interval is 1/1024s 2. 1/512s (2) - indicates that … |
| 1.3.6.1.4.1.2011.6.25.1.5.1.20 | Columnhw1588ClkPtpLockState | read-only | current | 1588 port lock state. Options: 1. locked(1) - indicates that the clock is locked 2. unlocked(2) - indicates that the clock is unlocked |
| 1.3.6.1.4.1.2011.6.25.1.5.1.21 | Columnhw1588ClkInWorkMode | read-create | current | Time source type. Options: 1. ptp(1) - indicates that time source that need to specify frame/slot/port 2. bits(2) - indicates that time source of a BITS port |
| 1.3.6.1.4.1.2011.6.25.1.5.1.22 | Columnhw1588ClkInSelectStatus | read-only | current | Time source select status. Options: 1. yes(1) - indicates that the time source is selected as the current time source. 2. no(2) - indicates that the time sourc… |
| 1.3.6.1.4.1.2011.6.25.1.6 | TablehwClockTransManageTable | not-accessible | current | Clock transaction management table. This table is used to configure and query the clock transmission. The index of this table is hwClkTransID, which is also th… |
| 1.3.6.1.4.1.2011.6.25.1.6.1 | RowhwClockTransManageEntry | not-accessible | current | Clock transaction management table. This table is used to configure and query the clock transmission. The index of this entry is hwClkTransID, which is also th… |
| 1.3.6.1.4.1.2011.6.25.1.6.1.1 | ColumnhwClkTransID | not-accessible | current | Clock transaction ID: The range is from 1 to 32. Range: 1 - 32 |
| 1.3.6.1.4.1.2011.6.25.1.6.1.2 | ColumnhwClkLocalIP | read-create | current | IP address of a local device |
| 1.3.6.1.4.1.2011.6.25.1.6.1.3 | ColumnhwClkVlanTag | read-create | current | VLAN tag. If the value is 0, it indicates that there is no VLAN tag in clock packages. Range: 0 - 4095 |
| 1.3.6.1.4.1.2011.6.25.1.6.1.4 | ColumnhwClkRemoteIP | read-create | current | IP address of remote device |
| 1.3.6.1.4.1.2011.6.25.1.6.1.5 | ColumnhwClkRowStatus | read-create | current | Clock transaction operation. If the value is set to 4, it indicates that a clock transmission configuration is added. If the value is set to 6, it indicates th… |
| 1.3.6.1.4.1.2011.6.25.1.7 | ScalarhwClockTransIDNext | read-only | current | Clock transaction index that host returns. If the value is 0, it indicates that there is no free index. Range: 0 - 32 |
| 1.3.6.1.4.1.2011.6.25.1.8 | TablehwACMClockIPTable | not-accessible | current | Clock ACM source IP table. The index of this table is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib description. |
| 1.3.6.1.4.1.2011.6.25.1.8.1 | RowhwACMClockIPEntry | not-accessible | current | Clock ACM source IP table. The index of this entry is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib description. |
| 1.3.6.1.4.1.2011.6.25.1.8.1.1 | ColumnhwACMClockIPIndex | read-write | current | Currently, it supports only ACM IP address but it can be extended in the future. Range: 0 - 2147483647 |
| 1.3.6.1.4.1.2011.6.25.1.8.1.2 | ColumnhwACMClockIP | read-write | current | ACM cLOCK switch IP address at layer 3. Range: 0.0.0.0-255.255.255.255 |
| 1.3.6.1.4.1.2011.6.25.1.8.1.3 | ColumnhwACMClkPostion | read-write | current | Physical position of clock source ACM IP address. The highest byte is useless. The second byte describes the frame ID, The third byte describes the slot ID. Th… |
| 1.3.6.1.4.1.2011.6.25.1.8.1.4 | ColumnhwACMClockIPRowStatus | read-create | current | Rowstatus of the ACM clock IP address. Options: 1. createAndGo(4) - Creates an ACM clock IP address 2. destroy(6) - Destroys an ACM clock IP address. |
| 1.3.6.1.4.1.2011.6.25.1.9 | TablehwBitsPortManageTable | not-accessible | current | Time management table. The index of this table is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib description. |
| 1.3.6.1.4.1.2011.6.25.1.9.1 | RowhwBitsPortManageEntry | not-accessible | current | Time management table. The index of this entry is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib description. |
| 1.3.6.1.4.1.2011.6.25.1.9.1.1 | ColumnhwBitsPortClkWorkMode | read-create | current | Port work mode of BITS clock. Options: 1. e1(1) - indicates that E1 type of clock input/output. 2. t1(2) - indicates that T1 type of clock input/output 3. f2mh… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.2 | ColumnhwBitsPortTimeWorkMode | read-create | current | Time work mode of Bits clock. Options: 1.ppsubx(1) - indicates that 1pps+ubx type of time input/output 2.dcls(2) - indicates that DCLS type of time input/outpu… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.3 | ColumnhwBitsPortIOStatus | read-create | current | Time interface direction mode. Options: 1.input(1) - indicates that the mode of time interface is input 2.output(2) - indicates that the mode of time interface… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.4 | ColumnhwPtpBitsClockAccuracy | read-create | current | The clockAccuracy characterizes a clock for the purpose of the best master clock (BMC) algorithm. The value of this attribute shall be estimated by the clock t… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.5 | ColumnhwPtpBitsClockClass | read-create | current | The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency distributed by the grandmaster clock. BC: Range: 0-… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.6 | ColumnhwPtpBitsPriority1 | read-create | current | The attribute priority1 is used in the execution of the best master clock algorithm. Lower values take precedence. Range: 0-255 Default: 128 This attribute is … |
| 1.3.6.1.4.1.2011.6.25.1.9.1.7 | ColumnhwPtpBitsPriority2 | read-create | current | The attribute priority2 is used in the execution of the best master clock algorithm. Lower values take precedence. Range: 0-255 Default: 128 |
| 1.3.6.1.4.1.2011.6.25.1.9.1.8 | ColumnhwPtpBitsTimeSource | read-create | current | This attribute indicates the source of time used by the grandmaster clock. Options: 1.atomicClock(16) - indicates that any device, or device directly connected… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.9 | ColumnhwBits1ppsDelayDirection | read-create | current | Delay mode of the time signal on the BITS port. Options: 1.receive(1) - indicates that delay mode is receive 2.send(2) - indicates that delay mode is send |
| 1.3.6.1.4.1.2011.6.25.1.9.1.10 | ColumnhwBits1ppsDelayValue | read-create | current | Adjusted delay of the time signal on the BITS port. In receive mode, it ranges from 0 to 200000. In send mode, it ranges from 0 to 1600. Unit:ns Default: 0 |
| 1.3.6.1.4.1.2011.6.25.1.9.1.11 | ColumnhwPtpBitsPortLocalPriority | read-create | current | In T-BC mode, the local priority of the BITS port is configured to calculate the optimum master clock. The smaller the value, the higher the priority. Range: 1… |
| 1.3.6.1.4.1.2011.6.25.1.9.1.12 | ColumnhwPtpBitsOffsetScaledLogVariance | read-create | current | Indicates estimate of the variations of the local clock from a linear timescale. In T-BC mode, it can only be 0x4E5D (default) and 0xFFFF. This attribute is in… |
| 1.3.6.1.4.1.2011.6.25.1.10 | Tablehw1588ClkPtpPortManageTable | not-accessible | current | 1588 clock PTP port management table. The index of this table is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib de… |
| 1.3.6.1.4.1.2011.6.25.1.10.1 | Rowhw1588ClkPtpPortManageEntry | not-accessible | current | 1588 clock PTP port management table. The index of this entry is ifIndex which comes from ifTable. The method for using ifIndex is provided in ifIndex's mib de… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.1 | Columnhw1588ClkPtpPortState | read-only | current | 1588 port status. Options: 1.initializing(1) - indicates that the state of 1588 clock PTP port is initializing 2.faulty(2) - indicates that the state of 1588 c… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.2 | Columnhw1588ClkPtpPortEnable | read-write | current | Enable or disable the 1588 function of PTP port. Options: 1. enable(1) -Enable the 1588 function of this port 2. disable(2) -Disable the 1588 function of this … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.3 | Columnhw1588ClkPtpPortVlan | read-write | obsolete | PTP VLAN. Range: 0 - 4094 |
| 1.3.6.1.4.1.2011.6.25.1.10.1.4 | Columnhw1588ClkPtpPortSourceIp | read-write | obsolete | PTP port source IP address |
| 1.3.6.1.4.1.2011.6.25.1.10.1.5 | Columnhw1588ClkPtpPortMsgFormat | read-only | current | PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.6 | Columnhw1588ClkPtpPortInfoMode | read-only | current | PTP info mode. Default: multicast(1) Options: 1. multicast(1) - indicates that the Info mode of the 1588 clock PTP port is multicast 2. unicast(2) - indicates … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.7 | Columnhw1588ClkPtpPortAnnounceSendTimeInterval | read-create | current | Interval for sending announce packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 2. 1/8s (7) - indicates that the … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.8 | Columnhw1588ClkPtpPortSyncSendTimeInterval | read-create | current | Interval for sending sync packets. BC: Default: 1/16s(6) Options: 1. 1/256s (2) - indicates that the time interval is 1/256s 2. 1/128s (3) - indicates that the… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.9 | Columnhw1588ClkPtpPortReqSendTimeInterval | read-create | current | Interval for sending req packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 3. 1/8s (7) - indicates that the time … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.10 | Columnhw1588ClkPtpPortLineWarpMode | read-create | current | Type of the asymmetric transmission windage for optical fibers, the default value is length(1). Options: 1. length(1) - indicates that the warp is represented … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.11 | Columnhw1588ClkPtpPortLineWarpDirect | read-create | current | Fiber windage direction, the default value is positive(1). Options: 1. positive(1) - indicates that the warp is in the positive direction 2. negative(2) - indi… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.12 | Columnhw1588ClkPtpPortLineWarpValue | read-create | current | PTP line warp value. If warp mode is length(1), the range is 0~14562m. If warp mode is time(2) the range is 0~65529 ns. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.13 | Columnhw1588ClkPtpPortAnnounceTimeout | read-create | current | Announce timeout specifies that the interval for receiving announce packets on the port. BC: Range: 2 - 255 Default value: 3 T-BC: Range: 3 - 255 Default value… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.14 | Columnhw1588ClkPtpPortDomainNum | read-create | obsolete | 1588 clock domain number. Range: 0-255 Default value: 0 |
| 1.3.6.1.4.1.2011.6.25.1.10.1.15 | Columnhw1588ClkDSCP | read-create | obsolete | 1588 clock DSCP:0-63. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.16 | Columnhw1588ClkVlanPRI | read-create | obsolete | 1588 clock Vlan priority:0-7. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.17 | Columnhw1588ClkPtpPortDelayMechanism | read-create | current | Delay measurement mechanism. BC: Options: 1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism. 2.pdelayMechanism(2) - indicates that delay … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.18 | Columnhw1588ClkPtpPortMacDestinationMac | read-create | current | Destination MAC address of MAC-encapsulated packets. BC: When the delay measurement mechanism is delay, the default destination MAC address is 011b-1900-0000. … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.19 | Columnhw1588ClkPtpPortUdpDestinationMac | read-create | current | Destination MAC address of UDP-encapsulated packets. When the delay measurement mechanism is delay, the default destination MAC address is 0100-5e00-0181. When… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.20 | Columnhw1588ClkPtpPortUdpEgressSourceIp | read-create | current | Source IP address of UDP-encapsulated packets. Default:0.0.0.0 This attribute is invalid in T-BC mode. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.21 | Columnhw1588ClkPtpPortUdpEgressDestinationIp | read-create | current | Destination IP address of UDP-encapsulated packets. When the delay measurement mechanism is delay, the default destination IP address is 224.0.1.129. When the … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.22 | Columnhw1588ClkPtpPortUdpVlanPRI | read-create | current | VLAN priority of UDP-encapsulated packets. Default:7 Invalid(-1) This attribute is invalid in T-BC mode. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.23 | Columnhw1588ClkPtpPortMacVlanPRI | read-create | current | VLAN priority of MAC-encapsulated packets. Default:7 Invalid(-1) This attribute is invalid in T-BC mode. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.24 | Columnhw1588ClkPtpPortUdpEgressDscp | read-create | current | DSCP of UDP-encapsulated packets. Default:56 Invalid(-1) This attribute is invalid in T-BC mode. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.25 | Columnhw1588ClkPtpPortClockStep | read-create | current | Clock step mode. Options: 1.oneStep(1) - indicates that clock step mode is one-step. 2.twoStep(2) - indicates that clock step mode is two-step. Default: oneSte… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.26 | Columnhw1588ClkPtpPortUdpVlan | read-create | current | VLAN of UDP-encapsulated packets. Default: untag(0) Invalid(-1) This attribute is invalid in T-BC mode. |
| 1.3.6.1.4.1.2011.6.25.1.10.1.27 | Columnhw1588ClkPtpPortMacVlan | read-create | current | VLAN of MAC-encapsulated packets. BC: Default: untag(0) Invalid(-1) T-BC: Supports only untag(0). |
| 1.3.6.1.4.1.2011.6.25.1.10.1.28 | ColumnhwPtpPortRingFiberLengthChangeValue | read-only | current | The change (unit: ns) of the fiber length in a ring network detection. It may be a positive or negative value, which depends on the next node. If the value is … |
| 1.3.6.1.4.1.2011.6.25.1.10.1.29 | ColumnhwPtpPortRingFiberLengthChangeValueFlag | read-only | current | Flag of the change of the fiber length in a ring network detection. Options: 1.invalid(-1) - indicates that the the ring network detection function does not ta… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.30 | Columnhw1588ClkPtpPortNotSlave | read-create | current | In T-BC mode, this port cannot be the slave port when notSlave is enable; this port can be the slave port when notSlave is disable. By default, it is enable(1)… |
| 1.3.6.1.4.1.2011.6.25.1.10.1.31 | Columnhw1588ClkPtpPortLocalPriority | read-create | current | In T-BC mode, the local priority of the port is configured to calculate the optimum master clock. The smaller the value, the higher the priority. Range: 1-255 … |
| 1.3.6.1.4.1.2011.6.25.1.11 | NodehwClkTraps | |||
| 1.3.6.1.4.1.2011.6.25.1.11.1 | NodehwClkTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.25.1.11.1.1 | ScalarhwClkGMClockIdChangeTrapSn | accessible-for-notify | current | SN of traps for reporting that the 1588 GM clock identity changes. |
| 1.3.6.1.4.1.2011.6.25.1.11.1.2 | ScalarhwClkTimeSrcIdChangeTrapSn | accessible-for-notify | current | SN of traps for reporting that the 1588 time source port identity changes. |
| 1.3.6.1.4.1.2011.6.25.1.11.1.3 | Scalarhw3rdClkOldSubBoardWorkMode | accessible-for-notify | current | The Out work mode of 3rd sub-board clock,the enumerative value is the same with hw3rdClkSubBoardWorkMode. Options: 1. trace(1) - indicates that the clock is wo… |
| 1.3.6.1.4.1.2011.6.25.1.11.1.4 | ScalarhwClkOutTypeTrapSn | accessible-for-notify | current | Clock out type. Currently, there are seven types: SDH, TDM, system, 19 MHzm, systemObsolete, external and external1. Options: 1.sdh(1) - indicates that output … |
| 1.3.6.1.4.1.2011.6.25.1.11.2 | NodehwClkCommonTraps | |||
| 1.3.6.1.4.1.2011.6.25.1.11.2.1 | NodehwClkCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.25.1.11.2.1.1 | NotificationhwClkGmcclockIdChangeTrap | current | This trap generates when the identity of the 1588 GM clock changes. | |
| 1.3.6.1.4.1.2011.6.25.1.11.2.1.2 | NotificationhwClkTimeSourcePortIdentityTrap | current | This trap generates when the identity of the 1588 time source port changes. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3 | NodehwClkAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.25.1.11.3.0 | NodehwClkAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.1 | NotificationhwClksystemclocksourceswitchesTrap | current | This trap generates when the system clock source switches to a new one. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.2 | NotificationhwClkExternalInputSignalLoseTrap | current | This trap generates when the input signal of the external clock source was lost. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.3 | NotificationhwClkExternalInputSignalRecoversTrap | current | This trap generates when the input signal of the external clock source recovers. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.4 | NotificationhwClk1588ClockSrcSwitchTrap | current | This trap generates when the 1588 clock source switches to a new one. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.5 | NotificationhwClk1588ClockSrcLostTrap | current | This trap generates when the 1588 clock source was lost. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.6 | NotificationhwClk1588ClockSrcRecoversTrap | current | This trap generates when the 1588 clock source recovers. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.7 | NotificationhwClkSubcardWorkmodeSwitchesTrap | current | This trap generates when the working mode of the clock sub-board has changed. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.8 | NotificationhwClkNoTraceTrap | current | This trap generates when the working mode of the clock sub-board has changed to non-tracing mode. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.9 | NotificationhwClkNoTraceRecoversTrap | current | This trap generates when the working mode of the clock sub-board has changed to tracing mode. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.10 | NotificationhwClkEsmcLoseTrap | current | This trap generates when ESMC is lost. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.11 | NotificationhwClkEsmcRestoreTrap | current | This trap generates when loss of ESMC recovers. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.12 | NotificationhwClkQlChangeTrap | current | This trap generates when the input QL of clock source changes. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.13 | NotificationhwClkPtpLockFailTrap | current | This trap generates when the lock state of ptp fail. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.14 | NotificationhwClkPtpLockRecoverTrap | current | This trap generates when the lock state of ptp recover. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.15 | NotificationhwClkPtpAsymMeasureFailTrap | current | This trap generates when the result of asymmetry measure time offset is large than 55 ns. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.16 | NotificationhwClkPtpAsymMeasureRestoreTrap | current | This trap generates when the asymmetry measure time offset is small than 55 ns. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.17 | NotificationhwClkQlFailTrap | current | This trap generates when the input QL of clock source less than the lower-limit. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.18 | NotificationhwClkQlRestoreTrap | current | This trap generates when the input QL of clock source recovers. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.19 | NotificationhwClkOutExternalClosedTrap | current | This trap generates when the output of external clock is closed | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.20 | NotificationhwClkOutExternalOpenedTrap | current | This trap generates when the output of external clock is opened. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.21 | NotificationhwClkSysClockLockFailTrap | current | This trap generates when the lock state of system clock fail. | |
| 1.3.6.1.4.1.2011.6.25.1.11.3.0.22 | NotificationhwClkSysClockLockRecoverTrap | current | This trap generates when the lock state of system clock recover. | |
| 1.3.6.1.4.1.2011.6.25.1.12 | Nodehw1588ACR | |||
| 1.3.6.1.4.1.2011.6.25.1.12.1 | Tablehw1588ACRMasterTable | not-accessible | current | 1588 ACR clock manage table. The index of this table is master index. |
| 1.3.6.1.4.1.2011.6.25.1.12.1.1 | Rowhw1588ACRMasterEntry | not-accessible | current | 1588 ACR clock manage table. The index of this entry is master index. |
| 1.3.6.1.4.1.2011.6.25.1.12.1.1.1 | Columnhw1588ACRMasterIndex | read-write | current | Index of 1588 ACR master. Range: 1 - 2 |
| 1.3.6.1.4.1.2011.6.25.1.12.1.1.2 | Columnhw1588ACRMasterIPAddr | read-write | current | 1588 ACR master IP address |
| 1.3.6.1.4.1.2011.6.25.1.12.1.1.3 | Columnhw1588ACRMasterNegotiate | read-only | current | Port enabled type. Options: 1. idle(1) - the negotiate state is idle 2. negotiate(2)- the negotiate state is negotiate |
| 1.3.6.1.4.1.2011.6.25.1.12.1.1.4 | Columnhw1588ACRRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.2011.6.25.1.12.2 | Nodehw1588ACRManage | |||
| 1.3.6.1.4.1.2011.6.25.1.12.2.1 | Scalarhw1588ACRNegotiateState | read-create | current | The 1588 ACR negotiate state. Options: 1. negotiateOn(1) - start negotiate 2. negotiateOff(2) - stop negotiating |
| 1.3.6.1.4.1.2011.6.25.1.12.2.2 | Scalarhw1588ACRDomain | read-write | current | The domain. Range: 0-255 Default: 0 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.3 | Scalarhw1588ACRAnnounceTimeout | read-write | current | The timeout times of rx announce packet. Range: 2-255 Default: 3 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.4 | Scalarhw1588ACRMsgFormat | read-create | current | PTPACR message encapsulation format,the default value is ptpeth(1). Options: 1. ptpeth(1) - indicates that the PTPACR message is encapsulated into an Ethernet … |
| 1.3.6.1.4.1.2011.6.25.1.12.2.5 | Scalarhw1588ACRInfoMode | read-create | current | PTPACR Info Mode,the default value is multicast(1). Options: 1. multicast(1) - the 1588 ACR info mode is multicast. 2. unicast(2) - the 1588 ACR info mode is u… |
| 1.3.6.1.4.1.2011.6.25.1.12.2.6 | Scalarhw1588ACRReqSendTimeInterval | read-create | current | PTPACR req send time interval. Options: 1. 1/1024s(1) - indicates that the time interval is 1/1024s 2. 1/512s (2) - indicates that the time interval is 1/512s … |
| 1.3.6.1.4.1.2011.6.25.1.12.2.7 | Scalarhw1588ACRSourceIp | read-write | current | The IP address of local. Default:0.0.0.0 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.8 | Scalarhw1588ACRDSCP | read-write | current | The dscp of ip head. Range: 0-63 Default: 56 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.9 | Scalarhw1588ACRVlan | read-write | current | PTPACR VLAN: 0-4094 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.10 | Scalarhw1588ACRVlanPRI | read-write | current | PTPACR VLAN priority: 0-7 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.11 | Scalarhw1588ACRGlbEnable | read-write | current | The switch of 1588ACR. Options: 1.disable(1) - disable 1588ACR function 2.enable(2) - enable 1588ACR function Default: disable(1) |
| 1.3.6.1.4.1.2011.6.25.1.12.2.12 | Scalarhw1588ACRDeviceType | read-write | current | The running device type. Options: 1.client(1) - running as client 2.server(2) - running as server Default: client(1) |
| 1.3.6.1.4.1.2011.6.25.1.12.2.13 | Scalarhw1588ACRVpnInstance | read-write | current | VPN instance of 1588ACR using. |
| 1.3.6.1.4.1.2011.6.25.1.12.2.14 | Scalarhw1588ACRAnnounceInterval | read-write | current | The interval of request for server tx announce packet. Options: 1. 1/8s (7) - indicates that the time interval is 1/8s 2. 1/4s (8) - indicates that the time in… |
| 1.3.6.1.4.1.2011.6.25.1.12.2.15 | Scalarhw1588ACRSyncInterval | read-write | current | The interval of request for server tx sync packet. Options: 1. 1/128s (3) - indicates that the time interval is 1/128s 2. 1/64s (4) - indicates that the time i… |
| 1.3.6.1.4.1.2011.6.25.1.12.2.16 | Scalarhw1588ACRDelayRespInterval | read-write | current | The interval of request for server tx delay response packet. Options: 1. 1/128s (3) - indicates that the time interval is 1/128s 2. 1/64s (4) - indicates that … |
| 1.3.6.1.4.1.2011.6.25.1.12.2.17 | Scalarhw1588ACRAnnounceDuration | read-write | current | The timeout time of announce renegotiation. Range: 60-1000 Default: 300 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.18 | Scalarhw1588ACRSyncDuration | read-write | current | The timeout time of sync renegotiation. Range: 60-1000 Default: 300 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.19 | Scalarhw1588ACRDelayRespDuration | read-write | current | The timeout time of delay response renegotiation. Range: 60-1000 Default: 300 |
| 1.3.6.1.4.1.2011.6.25.1.12.2.20 | Scalarhw1588ACRNegoMode | read-write | current | The negotiation mode. Options: 1.oneWay(1) - one way 2.twoWay(2) - two way Default: oneWay(1) |
| 1.3.6.1.4.1.2011.6.25.1.12.2.21 | Scalarhw1588ACRNegoEnable | read-write | current | The switch of 1588ACR negotiation. Options: 1.disable(1) - disable 1588ACR negotiation 2.enable(2) - enable 1588ACR negotiation Default: disable(1) |
| 1.3.6.1.4.1.2011.6.25.1.12.2.22 | Scalarhw1588ACRTraceSourceId | read-only | current | The trace source server ID. Options: 1.local(1) - no trace source 2.server1(2) - server1 3.server2(3) - server2 |
| 1.3.6.1.4.1.2011.6.25.1.12.3 | Nodehw1588ACRDfx | |||
| 1.3.6.1.4.1.2011.6.25.1.12.3.1 | Scalarhw1588ACRDfxPosMinPdCur | read-only | current | The current positive min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.2 | Scalarhw1588ACRDfxPosMinPdMin | read-only | current | The min positive min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.3 | Scalarhw1588ACRDfxPosMinPdMax | read-only | current | The max positive min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.4 | Scalarhw1588ACRDfxPosMinPdMean | read-only | current | The mean positive min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.5 | Scalarhw1588ACRDfxPosMinPdv | read-only | current | The positive min packet delay variation. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.6 | Scalarhw1588ACRDfxPosMaxPdCur | read-only | current | The current positive max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.7 | Scalarhw1588ACRDfxPosMaxPdMin | read-only | current | The min positive max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.8 | Scalarhw1588ACRDfxPosMaxPdMax | read-only | current | The max positive max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.9 | Scalarhw1588ACRDfxPosMaxPdMean | read-only | current | The mean positive max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.10 | Scalarhw1588ACRDfxPosMaxPdv | read-only | current | The positive max packet delay variation. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.11 | Scalarhw1588ACRDfxNegMinPdCur | read-only | current | The current negative min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.12 | Scalarhw1588ACRDfxNegMinPdMin | read-only | current | The min negative min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.13 | Scalarhw1588ACRDfxNegMinPdMax | read-only | current | The max negative min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.14 | Scalarhw1588ACRDfxNegMinPdMean | read-only | current | The mean negative min packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.15 | Scalarhw1588ACRDfxNegMinPdv | read-only | current | The negative min packet delay variation. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.16 | Scalarhw1588ACRDfxNegMaxPdCur | read-only | current | The current negative max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.17 | Scalarhw1588ACRDfxNegMaxPdMin | read-only | current | The min negative max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.18 | Scalarhw1588ACRDfxNegMaxPdMax | read-only | current | The max negative max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.19 | Scalarhw1588ACRDfxNegMaxPdMean | read-only | current | The mean negative max packet delay. |
| 1.3.6.1.4.1.2011.6.25.1.12.3.20 | Scalarhw1588ACRDfxNegMaxPdv | read-only | current | The negative max packet delay variation. |
| 1.3.6.1.4.1.2011.6.25.1.12.4 | Tablehw1588ACRServerTable | not-accessible | current | 1588ACR server management table. The index of this table is server index. |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1 | Rowhw1588ACRServerEntry | not-accessible | current | 1588ACR server management table. The index of this entry is server index. |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.1 | Columnhw1588ACRServerIndex | read-only | current | The server index. Range: 1-2 |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.2 | Columnhw1588ACRServerIpAddr | read-write | current | The IP address of server. |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.3 | Columnhw1588ACRServerNegoStatus | read-only | current | The status of negotiation. Options: 1. init(1) - no enable negotiation 2. success(2) - negotiate succesfully 3. failed(3) - negotiate failed |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.4 | Columnhw1588ACRServerSsm | read-only | current | The quality level. Options: 1. prc(2) - prc 2. ssua(4) - ssua 3. ssub(8) - ssub 4. sec(11) - sec 5. dnu(15) - dnu |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.5 | Columnhw1588ACRServerPriority | read-only | current | The priority. |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.6 | Columnhw1588ACRServerPTSFLossAnnounce | read-only | current | The announce PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.7 | Columnhw1588ACRServerPTSFLossSync | read-only | current | The sync PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced |
| 1.3.6.1.4.1.2011.6.25.1.12.4.1.8 | Columnhw1588ACRServerPTSFLossDelayResp | read-only | current | The delay response PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced |