HUAWEI-ENVIRONMENT-MIB
259 objects
The MIB module defines MIB objects which include Environment Monitor Unit, Analog Environment data, Digital Environment data, Out data and Fan data Monitor management MIB interfaces.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.1 | IdentityhwEnvironment | The MIB module defines MIB objects which include Environment Monitor Unit, Analog Environment data, Digital Environment data, Out data and Fan data Monitor man… | ||
| 1.3.6.1.4.1.2011.6.1.1 | NodehwEnvironmentMon | |||
| 1.3.6.1.4.1.2011.6.1.1.1 | TablehwEnvironmentInfoTable | not-accessible | current | Information table of Environment Monitor Unit. The Environment Monitor Unit is some kind of Environment monitoring device and is used to monitor many kinds of … |
| 1.3.6.1.4.1.2011.6.1.1.1.1 | RowhwEnvironmentInfoEntry | not-accessible | current | Information table of Environment Monitor Unit. The Environment Monitor Unit is some kind of Environment monitoring device and is used to monitor many kinds of … |
| 1.3.6.1.4.1.2011.6.1.1.1.1.1 | ColumnhwEnvEmuIndex | read-only | current | hwEnvEmuIndex is the index of the Environment monitoring unit, used as the index of hwEnvironmentInfoTable. Range: 0 - 2048 |
| 1.3.6.1.4.1.2011.6.1.1.1.1.2 | ColumnhwEnvEmuType | read-write | current | Type of the physical monitoring devices associated with the environment monitoring unit. Options: 1.h302ESC(1) -Type of the physical monitoring devices is H302… |
| 1.3.6.1.4.1.2011.6.1.1.1.1.3 | ColumnhwEnvBoardName | read-write | current | Name of the environment monitoring unit. |
| 1.3.6.1.4.1.2011.6.1.1.1.1.4 | ColumnhwEnvCommState | read-only | current | Status of the communication between the environment monitoring unit and the device. The environmental condition can be tested only when the communication is no… |
| 1.3.6.1.4.1.2011.6.1.1.1.1.5 | ColumnhwEnvRowStatus | read-create | current | RowStatus standard operation. The creation and deletion operations are supported currently. |
| 1.3.6.1.4.1.2011.6.1.1.1.1.6 | ColumnhwEnvVersion | read-only | current | Version information of the environment monitoring unit. invalid(zero-length) |
| 1.3.6.1.4.1.2011.6.1.1.1.1.7 | ColumnhwEnvFrameId | read-write | current | ID of the shelf housing the environment monitoring unit. |
| 1.3.6.1.4.1.2011.6.1.1.1.1.8 | ColumnhwEnvAdminStatus | read-write | current | The management status of the monitoring unit. Options: 1.noOperation(1) -no any operation 2.reset(2) -reset the monitoring board 3.manage(3) -manage the monito… |
| 1.3.6.1.4.1.2011.6.1.1.1.1.9 | ColumnhwEnvSlaveNodeId | read-write | current | ID of the slave object that the environment monitoring unit belongs to. The environment monitoring unit uses the slave object ID to communicate with the upstre… |
| 1.3.6.1.4.1.2011.6.1.1.1.1.10 | ColumnhwEnvComType | read-write | current | The serial communication protocol type between the monitoring unit and the upstream equipment. The protocol types used are as follows: Options: 1.unknown(1) -T… |
| 1.3.6.1.4.1.2011.6.1.1.1.1.11 | ColumnhwEnvCLEICode | read-only | current | Environment CLEI Code. |
| 1.3.6.1.4.1.2011.6.1.1.1.1.12 | ColumnhwEnvEmuPower | read-only | current | Power of the environment monitoring equipment associated with the environment monitoring unit. Unit: Watt. Invalid:-1. |
| 1.3.6.1.4.1.2011.6.1.1.1.1.13 | ColumnhwEnvEmuTypeName | read-only | current | Name of the environment type. Invalid: null string. |
| 1.3.6.1.4.1.2011.6.1.1.2 | TablehwAnaChannelTable | not-accessible | current | Information table of the analog parameters monitored. The indexes of this table are hwEnvEmuIndex or hwAnaChannelIndex. hwEnvEmuIndex is the index of the envir… |
| 1.3.6.1.4.1.2011.6.1.1.2.1 | RowhwAnaChannelEntry | not-accessible | current | Information table of the analog parameters monitored. The indexes of this entry are hwEnvEmuIndex or hwAnaChannelIndex. hwEnvEmuIndex is the index of the envir… |
| 1.3.6.1.4.1.2011.6.1.1.2.1.1 | ColumnhwAnaChannelIndex | read-only | current | Index of the analog parameter that is monitored by the monitoring unit. Range: 0 - 255 |
| 1.3.6.1.4.1.2011.6.1.1.2.1.2 | ColumnhwAnaName | read-write | current | Name of the analog parameter that is monitored by a monitoring unit. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.3 | ColumnhwAnaType | read-write | current | This object indicates the type of the sensor that is used to test the Analog parameter. Options: 1.invalid(-1) -there is no valid sensor 2.voltage(1) -voltage … |
| 1.3.6.1.4.1.2011.6.1.1.2.1.4 | ColumnhwAnaMeasureType | read-write | current | This object indicates the unit of the analog parameter that is tested. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.5 | ColumnhwAnaWorkHigh | read-write | current | High limit of the analog normal work |
| 1.3.6.1.4.1.2011.6.1.1.2.1.6 | ColumnhwAnaWorkLow | read-write | current | Low limit of the analog normal work |
| 1.3.6.1.4.1.2011.6.1.1.2.1.7 | ColumnhwAnaAlmHigh | read-write | current | High limit of the analog alarm. The alarm is produced when the measurement value is higher than this value |
| 1.3.6.1.4.1.2011.6.1.1.2.1.8 | ColumnhwAnaAlmLow | read-write | current | The low limit of the analog alarm. The alarm is produced when the measurement value is lower than this value. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.9 | ColumnhwAnaCurrentValue | read-only | current | The actual measurement value of the present analog. Unit: milli invalid: 0x7fffffff |
| 1.3.6.1.4.1.2011.6.1.1.2.1.10 | ColumnhwAnaAlarmState | read-only | current | The status of the present monitored. Options: 1.normal(1) -indicates that the measurement value is lower than the set high limit of the alarm, and higher than … |
| 1.3.6.1.4.1.2011.6.1.1.2.1.11 | ColumnhwAnaRowStatus | read-create | current | RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.12 | ColumnhwAnaAlarmID | read-write | current | Analog alarm definition. Options: 1.temperature(1) -temperature alarm 2.humidity(2) -humidity alarm 3.voltage(3) -voltage alarm 4.electriccurrent(4) -electric … |
| 1.3.6.1.4.1.2011.6.1.1.2.1.13 | ColumnhwAnaMonitorState | read-write | current | analog alarm(temperature,humidity,battery temperature) monitor flag value, The value 1 enable monitor, value 2 disable monitor. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.14 | ColumnhwAnaSignalHigh | read-write | current | High limit of the analog signal. invalid: 0x7fffffff. |
| 1.3.6.1.4.1.2011.6.1.1.2.1.15 | ColumnhwAnaSignalLow | read-write | current | Low limit of the analog signal. invalid: 0x7fffffff. |
| 1.3.6.1.4.1.2011.6.1.1.3 | TablehwDigChannelTable | not-accessible | current | Information table of the digital parameters monitored. The indexes of this table are hwEnvEmuIndex and hwDigChannelIndex. hwEnvEmuIndex is the index of the env… |
| 1.3.6.1.4.1.2011.6.1.1.3.1 | RowhwDigChannelEntry | not-accessible | current | Information table of the digital parameters monitored. The indexes of this entry are hwEnvEmuIndex and hwDigChannelIndex. hwEnvEmuIndex is the index of the env… |
| 1.3.6.1.4.1.2011.6.1.1.3.1.1 | ColumnhwDigChannelIndex | read-only | current | Index of the digital parameter that is monitored by a monitoring unit. Range: 0 - 255 |
| 1.3.6.1.4.1.2011.6.1.1.3.1.2 | ColumnhwDigChannelName | read-write | current | Name of the digital parameter that is monitored by a monitoring unit. |
| 1.3.6.1.4.1.2011.6.1.1.3.1.3 | ColumnhwAlmCondition | read-write | current | Alarm conditions. Options: 1.lowLevelAlarm(1) -refers to the alarm produced when the digital sensor detects the low level 2.highLevelAlarm(2) -refers to the al… |
| 1.3.6.1.4.1.2011.6.1.1.3.1.4 | ColumnhwDigChannelState | read-only | current | The status of the present monitored digital sensor Options: 1.normal(1) -indicates that the digital sensor works normally 2.alarm(2) -indicates that the digita… |
| 1.3.6.1.4.1.2011.6.1.1.3.1.5 | ColumnhwDigRowStatus | read-create | current | RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. |
| 1.3.6.1.4.1.2011.6.1.1.3.1.6 | ColumnhwDigAlarmID | read-write | current | Digital alarm definition. Options: 1.acvoltage(1) -ac voltage alarm 2.acswitch(2) -ac switch alarm 3.batteryvoltage(3) -battery voltage alarm 4.batteryfuse(4) … |
| 1.3.6.1.4.1.2011.6.1.1.3.1.7 | ColumnhwDigMonitorState | read-write | current | default digital alarm(Door,Water,Smoke,Wiring) monitor flag value, The value 1 enable monitor, value 2 disable monitor. |
| 1.3.6.1.4.1.2011.6.1.1.4 | TablehwControlOutTable | not-accessible | current | Monitored digital out table. This table indicates information about whether digital parameter is monitored. The indexes of this table are hwEnvEmuIndex and hwC… |
| 1.3.6.1.4.1.2011.6.1.1.4.1 | RowhwControlOutEntry | not-accessible | current | Monitored digital out table. This table indicates information about whether digital parameter is monitored. The indexes of this entry are hwEnvEmuIndex and hwC… |
| 1.3.6.1.4.1.2011.6.1.1.4.1.1 | ColumnhwControlOutIndex | read-only | current | Index of the digital out table monitored in the monitoring unit Range: 0 - 255 |
| 1.3.6.1.4.1.2011.6.1.1.4.1.2 | ColumnhwControlOutName | read-write | current | Name of the monitored digital out table |
| 1.3.6.1.4.1.2011.6.1.1.4.1.3 | ColumnhwControlOutAdminStatus | read-write | current | Control Out administration: executes the on/off operation. Options: 1. on(1) - trun on 2. off(2) - trun off |
| 1.3.6.1.4.1.2011.6.1.1.4.1.4 | ColumnhwControlOutRowStatus | read-create | current | RowStatus standard operation. The values 1 and 2 are supported currently. 1 indicates the activation status, and 2 indicates the non-activation status. |
| 1.3.6.1.4.1.2011.6.1.1.5 | TablehwFanTable | not-accessible | current | Information table of fan monitoring. The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitor… |
| 1.3.6.1.4.1.2011.6.1.1.5.1 | RowhwFanEntry | not-accessible | current | Information table of fan monitoring. The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of the monitor… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.1 | ColumnhwFanName | read-write | current | Fan name |
| 1.3.6.1.4.1.2011.6.1.1.5.1.2 | ColumnhwFanControlMode | read-write | current | The fan control modes of the fan frame. Options: 1.manual(1) -indicates that the fan is always on, and the fan speed can be manually adjusted 2.emuAuto(2) -ind… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.3 | ColumnhwFanControlState | read-write | current | For ESC fan, all should be checked to turn on the fan, while all should not be checked to turn off the fan. Options: 1.fan1(0) -indicates that the first fan ne… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.4 | ColumnhwESCFanTempAutoOn | read-write | current | The fan temperature set, in unit of centigrade. The MIB object only functions for the fan monitoring board of ESC and is not applicable to the type of fan moni… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.5 | ColumnhwESCFanTempAutoOff | read-write | current | The fan temperature set, in unit of centigrade. The MIB object only functions for the fan monitoring board of ESC and is not applicable to the type of fan moni… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.6 | ColumnhwFanRowStatus | read-create | current | RowStatus standard operation. |
| 1.3.6.1.4.1.2011.6.1.1.5.1.7 | ColumnhwCurrentTemp | read-only | current | The present temperature value Unit: 0.01 degree invalid: 0x7fffffff |
| 1.3.6.1.4.1.2011.6.1.1.5.1.8 | ColumnhwFanSpeedMode | read-write | current | The adjusting rotation mode of the fan. Options: 1.continue(1) -continuous control 2.discontinue(2) -discrete control 3.percent(3) -duty ratio control 4.invali… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.9 | ColumnhwFanSpeed | read-write | current | When hwFanSpeedMode is the continue mode, 0 indicates the present wind speed +1, while 1 indicates the present wind speed -1. When hwFanSpeedMode is discontinu… |
| 1.3.6.1.4.1.2011.6.1.1.5.1.10 | ColumnhwFanTypeDescription | read-only | current | Fan Type Description. Invalid: null string. |
| 1.3.6.1.4.1.2011.6.1.1.6 | TablehwTcuTable | not-accessible | current | Information table of temperature control unit. The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of t… |
| 1.3.6.1.4.1.2011.6.1.1.6.1 | RowhwTcuEntry | not-accessible | current | Information table of temperature control unit. The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. hwEnvEmuIndex is the index of t… |
| 1.3.6.1.4.1.2011.6.1.1.6.1.1 | ColumnhwTcuHeatExchangerType | read-only | current | Heat Exchanger Type Description. Invalid: null string. |
| 1.3.6.1.4.1.2011.6.1.1.6.1.2 | ColumnhwTcuExternalFanRev | read-only | current | The rev of Heat Exchanger outer fan, in unit of RMP (rotate per minite), invalid(-1) |
| 1.3.6.1.4.1.2011.6.1.1.6.1.3 | ColumnhwTcuInternalFanRev | read-only | current | The rev of Heat Exchanger inner fan, in unit of RMP (rotate per minite), invalid(-1) |
| 1.3.6.1.4.1.2011.6.1.1.6.1.4 | ColumnhwTcuStartHeatTemp | read-write | current | The temperature of Heat Exchanger starts to heat up, in unit of Celsius. default: 5 |
| 1.3.6.1.4.1.2011.6.1.1.6.1.5 | ColumnhwTcuStopHeatTemp | read-write | current | The temperature of Heat Exchanger stops heating, in unit of Celsius. default: 25 |
| 1.3.6.1.4.1.2011.6.1.1.7 | TablehwOpticalNodeTable | not-accessible | current | Information table of optical node unit. The index of this table is hwFrameIndex that comes from hwFrameTable. hwFrameIndex is the index of the optical node uni… |
| 1.3.6.1.4.1.2011.6.1.1.7.1 | RowhwOpticalNodeEntry | not-accessible | current | Information table of optical node unit. interface optical node config mode. |
| 1.3.6.1.4.1.2011.6.1.1.7.1.1 | ColumnhwONCOMState | read-only | current | The state of Optical node The Optical node can be used only when it is online. Options: 1.online(1) - indicates that Optical state is online 2.offline(2) - ind… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.2 | ColumnhwONModelNumber | read-only | current | The model number of Optical node invalid(zero-length) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.3 | ColumnhwONHardwareVer | read-only | current | The hard version of Optical node invalid(zero-length) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.4 | ColumnhwONSoftwareVer | read-only | current | The software version of Optical node invalid(zero-length) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.5 | ColumnhwONProductDate | read-only | current | The product date of Optical node field octets contents range 1 1-4 year 0..65536 2 5-6 month 1..12 3 7-8 day 1..31 |
| 1.3.6.1.4.1.2011.6.1.1.7.1.6 | ColumnhwOROpticalPowerValue | read-only | current | This is the power of the only channel for the single-channel optical receiver. This is the power of channel 0 for the dual-channel optical receiver. Its unit i… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.7 | ColumnhwOROpticalPowerAlarmState | read-only | current | This is the power alarm state of the only channel for the single-channel optical receiver. This is the power alarm state of channel 0 for the dual-channel opti… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.8 | ColumnhwOROpticalPowerLowThreshold | read-write | current | This is the low power threshold of the only channel for the single-channel optical receiver. This is the low power threshold of channel 0 for the dual-channel … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.9 | ColumnhwOROpticalPowerHighThreshold | read-write | current | This is the high power threshold of the only channel for the single-channel optical receiver. This is the high power threshold of channel 0 for the dual-channe… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.10 | ColumnhwOROpticalAGCStart | read-write | current | This is the start value of the AGC range of the only channel for the single-channel optical receiver. This is the start value of the AGC range of channel 0 for… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.11 | ColumnhwORRFPowerValue | read-only | current | The RF power value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power of channel 0. Its un… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.12 | ColumnhwORRFPowerAlarmState | read-only | current | The RF power alarm state of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power alarm status o… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.13 | ColumnhwORRFPowerLowThreshold | read-write | current | The RF power low threshold of Optical receiver Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which h… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.14 | ColumnhwORRFPowerHighThreshold | read-write | current | The RF power high threshold of Optical receiver Its unit is dBmV,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.15 | ColumnhwORRFAttValue | read-write | current | The RF ATT value of Optical receiver Its unit is db. Its range is 0db~10db. |
| 1.3.6.1.4.1.2011.6.1.1.7.1.16 | ColumnhwORRFSwitch | read-write | current | The RF switch of Optical receiver The Optical receiver can be used only when it is on. Options: 1.off(1) - indicates that RF Switch state is off 2.on(2) - indi… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.17 | ColumnhwONBarcode | read-only | current | The barcode of Optical node invalid(zero-length) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.18 | ColumnhwONCurrentInputVoltage1 | read-only | current | The current input voltage1 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has bee… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.19 | ColumnhwONCurrentInputVoltage2 | read-only | current | The current input voltage2 of Optical node. Its unit is V,its real accuracy is 0.1. SNMP uses it which has been enlarged 10 by host. user uses it which has bee… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.20 | ColumnhwORAGCRange | read-only | current | This is the AGC range of the only channel for the single-channel optical receiver. This is the AGC range of channel 0 for the dual-channel optical receiver. |
| 1.3.6.1.4.1.2011.6.1.1.7.1.21 | ColumnhwOTOpticalOutputPowerValue | read-only | current | This is the power of the only channel for the single-channel optical transmitter. This is the power of channel 0 for the dual-channel optical transmitter. Its … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.22 | ColumnhwOTOpticalOutputPowerAlarmState | read-only | current | This is the power alarm state of the only channel for the single-channel optical transmitter. This is the power alarm state of channel 0 for the dual-channel o… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.23 | ColumnhwOTOpticalOutputPowerLowThreshold | read-write | current | This is the low power threshold of the only channel for the single-channel optical transmitter. This is the low power threshold of channel 0 for the dual-chann… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.24 | ColumnhwOTOpticalOutputPowerHighThreshold | read-write | current | This is the high power threshold of the only channel for the single-channel optical transmitter. This is the high power threshold of channel 0 for the dual-cha… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.25 | ColumnhwOTBiasValue | read-only | current | This is the bias current value of the only channel for the single-channel optical transmitter. This is the bias current value of channel 0 for the dual-channel… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.26 | ColumnhwOTBiasAlarmState | read-only | current | This is the bias current alarm state of the only channel for the single-channel optical transmitter. This is the bias current alarm state of channel 0 for the … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.27 | ColumnhwOTBiasLowThreshold | read-write | current | This is the low bias current threshold of the only channel for the single-channel optical transmitter. This is the low bias current threshold of channel 0 for … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.28 | ColumnhwOTBiasHighThreshold | read-write | current | This is the high bias current threshold of the only channel for the single-channel optical transmitter. This is the high bias current threshold of channel 0 fo… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.29 | ColumnhwOTWaveLength | read-only | current | The wave length of Optical transmitter. Its unit is nm. Its value is 1310nm or 1550nm or 1610nm. invalid(-1) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.30 | ColumnhwOROpticalWorkMode | read-write | current | The protect-switch channel policy of dual-channel optical receiver. Options: 1.force-channel0(1) - Force channel 0 as working channel, and forbid switching cha… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.31 | ColumnhwOROpticalActiveChannel | read-only | current | The working channel of dual-channel optical receiver. invalid(-1). |
| 1.3.6.1.4.1.2011.6.1.1.7.1.32 | ColumnhwOROpticalCH1PowerValue | read-only | current | This is the power of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by ho… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.33 | ColumnhwOROpticalCH1PowerAlarmState | read-only | current | This is the power alarm state of channel 1 for the dual-channel optical receiver. The optical receiver can be used only when it is normal. Options: 1.normal(1)… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.34 | ColumnhwOROpticalCH1PowerLowThreshold | read-write | current | This is the low power threshold of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enla… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.35 | ColumnhwOROpticalCH1PowerHighThreshold | read-write | current | This is the high power threshold of channel 1 for the dual-channel optical receiver. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enl… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.36 | ColumnhwOROpticalCH1AGCStart | read-write | current | This is the start value of the AGC range of channel 1 for the dual-channel optical receiver. Its unit is dBm,its real range is -4dBm~3dBm. |
| 1.3.6.1.4.1.2011.6.1.1.7.1.37 | ColumnhwORAGCCH1Range | read-only | current | This is the AGC range of channel 1 for the dual-channel optical receiver. |
| 1.3.6.1.4.1.2011.6.1.1.7.1.38 | ColumnhwORType | read-only | current | The optical type of optical node. Options: 1.optical-receiver(1) 2.optical-receiver/optical-transmitter(2) 3.dual-channel optical-receiver(3) 4.optical-receive… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.39 | ColumnhwOTOpticalOutputCH1PowerValue | read-only | current | This is the power of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been enlarged 100 by… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.40 | ColumnhwOTOpticalOutputCH1PowerAlarmState | read-only | current | This is the power alarm state of channel 1 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options: 1.nor… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.41 | ColumnhwOTOpticalOutputCH1PowerLowThreshold | read-write | current | This is the low power threshold of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been e… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.42 | ColumnhwOTOpticalOutputCH1PowerHighThreshold | read-write | current | This is the high power threshold of channel 1 for the dual-channel optical transmitter. Its unit is dbm,its real accuracy is 0.01. SNMP uses it which has been … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.43 | ColumnhwOTCH1BiasValue | read-only | current | This is the bias current value of channel 1 for the dual-channel optical transmitter. Its unit is mA,its normal range is 1mA~100mA. invalid(-1) |
| 1.3.6.1.4.1.2011.6.1.1.7.1.44 | ColumnhwOTCH1BiasAlarmState | read-only | current | This is the bias current alarm state of channel 1 for the dual-channel optical transmitter. The optical transmitter can be used only when it is normal. Options… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.45 | ColumnhwOTCH1BiasLowThreshold | read-write | current | This is the low bias current threshold of channel 1 for the dual-channel optical transmitter. The alarm is produced when the bias current value is lower than t… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.46 | ColumnhwOTCH1BiasHighThreshold | read-write | current | This is the high bias current threshold of channel 1 for the dual-channel optical transmitter. The alarm is produced when the bias current value is higher than… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.47 | ColumnhwORCfgChannel0AGCMode | read-write | current | Indicates the configuration information about the AGC gain on channel 0 for the optical receiver. Options: 1.off(2) - indicates that AGC gain is off 2.minus6to… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.48 | ColumnhwORCfgChannel1AGCMode | read-write | current | Indicates the configuration information about the AGC gain on channel 1 for the optical receiver. Options: 1.off(2) - indicates that AGC gain is off 2.minus6to… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.49 | ColumnhwORRuninfoChannel0AGCMode | read-only | current | Indicates the running information about the AGC gain on channel 0 for the optical receiver. Options: 1.invalid(1) - indicates that AGC gain is not supported fo… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.50 | ColumnhwORRuninfoChannel1AGCMode | read-only | current | Indicates the running information about the AGC gain on channel 1 for the optical receiver. Options: 1.invalid(1) - indicates that AGC gain is not supported fo… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.51 | ColumnhwORRFCH1PowerValue | read-only | current | When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power of channel 1. Its unit is dBmV,its real … |
| 1.3.6.1.4.1.2011.6.1.1.7.1.52 | ColumnhwORRFCH1PowerAlarmState | read-only | current | When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power alarm status of channel 1. The Optical r… |
| 1.3.6.1.4.1.2011.6.1.1.7.1.53 | ColumnhwOTCH1WaveLength | read-only | current | The wave length of channel 1 for the Optical transmitter . Its unit is nm. Its value is 1310nm or 1550nm or 1610nm. invalid(-1) |
| 1.3.6.1.4.1.2011.6.1.1.8 | TablehwOpticalPowerTable | not-accessible | current | The indexes of this entry are hwFrameIndex and hwOpticalChnIndex. The index of this table is hwFrameIndex that comes from hwFrameTable. |
| 1.3.6.1.4.1.2011.6.1.1.8.1 | RowhwOpticalPowerEntry | not-accessible | current | The indexes of this entry are hwFrameIndex and hwOpticalChnIndex. The index of this table is hwFrameIndex that comes from hwFrameTable. |
| 1.3.6.1.4.1.2011.6.1.1.8.1.1 | ColumnhwOpticalChnIndex | accessible-for-notify | current | The channel id of optical node. |
| 1.3.6.1.4.1.2011.6.1.1.8.1.2 | ColumnhwOpticalPowerValue | accessible-for-notify | current | The optical power value of optical node Its unit is dbm,its real accuracy is 0.01. |
| 1.3.6.1.4.1.2011.6.1.1.8.1.3 | ColumnhwOpticalBiasValue | accessible-for-notify | current | The optical Bias value of optical node Its unit is mA. |
| 1.3.6.1.4.1.2011.6.1.1.9 | TablehwFanUnitTable | not-accessible | current | Fan unit table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex. hwEnvEmuIndex is the index of the monitori… |
| 1.3.6.1.4.1.2011.6.1.1.9.1 | RowhwFanUnitEntry | not-accessible | current | Fan unit table. The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex. hwEnvEmuIndex is the index of the monitori… |
| 1.3.6.1.4.1.2011.6.1.1.9.1.1 | ColumnhwFanUnitIndex | read-only | current | The index of fan unit. |
| 1.3.6.1.4.1.2011.6.1.1.9.1.2 | ColumnhwFanUnitSpeed | read-only | current | The speed of fan unit Its unit is round per minute, invalid: -1. |
| 1.3.6.1.4.1.2011.6.1.2 | NodesnmpTrapsDef | |||
| 1.3.6.1.4.1.2011.6.1.2.0 | NodeemmsnmpTraps | |||
| 1.3.6.1.4.1.2011.6.1.2.0.1 | NotificationenvCommAlarm | current | The communication alarm of environment monitoring board, reporting the environment monitoring unit ID. This trap message is reported when the communication bet… | |
| 1.3.6.1.4.1.2011.6.1.2.0.2 | NotificationenvCommAlarmResume | current | The communication alarm recovery of the environment monitoring, reporting the environment monitoring unit ID. This trap message is reported when the communicat… | |
| 1.3.6.1.4.1.2011.6.1.2.0.3 | NotificationanaFaultAlarm | current | The alarm recovery of the analog exception, reporting the environment monitoring unit ID. This trap message is reported when there is an analog exception in em… | |
| 1.3.6.1.4.1.2011.6.1.2.0.4 | NotificationanaFaultAlarmResume | current | The alarm recovery of the analog exception, reporting the environment monitoring unit ID. This trap message is reported when the analog exception recovery in e… | |
| 1.3.6.1.4.1.2011.6.1.2.0.5 | NotificationanaTooHighAlarm | current | The alarm of too high an analog, reporting the environment monitoring unit ID and the channel ID of the analog sensor. This trap message is reported when an an… | |
| 1.3.6.1.4.1.2011.6.1.2.0.6 | NotificationanaTooHighAlarmResume | current | The alarm of too high analog resume, reporting the environment monitoring unit ID. This trap message is reported when an analog value returns to normal range f… | |
| 1.3.6.1.4.1.2011.6.1.2.0.7 | NotificationanaTooLowAlarm | current | The alarm of too low an analog, reporting the environment monitoring unit ID and the channel ID of the analog sensor. This trap message is reported when an ana… | |
| 1.3.6.1.4.1.2011.6.1.2.0.8 | NotificationanaTooLowAlarmResume | current | The alarm of too low an analog, reporting the environment monitoring unit ID. This trap message is reported when an analog value returns to normal range from t… | |
| 1.3.6.1.4.1.2011.6.1.2.0.9 | NotificationcontrolAlarm | current | The control alarm, reporting the environment monitoring unit ID. This trap message is reported when emu control operation fails. | |
| 1.3.6.1.4.1.2011.6.1.2.0.10 | NotificationcontrolAlarmResume | current | The control alarm, reporting the environment monitoring unit ID. This trap message is reported when emu control operation resumes. | |
| 1.3.6.1.4.1.2011.6.1.2.0.11 | NotificationdigtalMeasureAlarm | current | The digital measure alarm, reporting the environment monitoring unit ID and the channel ID of the digital sensor. This trap message is reported when emu measur… | |
| 1.3.6.1.4.1.2011.6.1.2.0.12 | NotificationdigtaleasureAlarmResume | current | The digital measure alarm recovery, reporting the environment monitoring unit ID and the channel ID of the digital sensor. This trap message is reported when e… | |
| 1.3.6.1.4.1.2011.6.1.2.0.13 | NotificationfanExistsAlarm | current | Fan nonexistance alarm. This trap message is reported when there is no fan device connected to control board. | |
| 1.3.6.1.4.1.2011.6.1.2.0.14 | NotificationfanExistsAlarmResume | current | Fan nonexistance alarm recovery. This trap message is reported when there is a fan device connected to control board. | |
| 1.3.6.1.4.1.2011.6.1.2.0.15 | NotificationfanRunStateAlarm | current | Fan running status alarm. This trap message is reported when the fan run state gets abnormal. | |
| 1.3.6.1.4.1.2011.6.1.3 | NodeenvConformance | |||
| 1.3.6.1.4.1.2011.6.1.3.1 | NodeenvCompliances | |||
| 1.3.6.1.4.1.2011.6.1.3.2 | NodeenvGroups | |||
| 1.3.6.1.4.1.2011.6.1.4 | NodehwEnvironTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.1 | NodehwEnvironCommonTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.1.0 | NodehwEnvironCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.1.4.1.0.1 | NotificationhwEmmEmuAutofindTrap | current | The agent generates this trap when a new EMU autofind. | |
| 1.3.6.1.4.1.2011.6.1.4.2 | NodehwEnvironAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.2.1 | NodehwEnvironEmuAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.2.1.0 | NodehwEnvironEmuAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.1 | NotificationhwEmmEmufailTrap | current | The agent generates this trap when the communication of the EMU with the host is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.2 | NotificationhwEmmEmuRecoverTrap | current | The agent generates this trap when the communication of the EMU with the host recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.3 | NotificationhwEmmEmuHardwareFaultTrap | current | The agent generates this trap when the following two faults occurs: 1. Power fault, which involves the following three scenarios: 1) Only one power board is in… | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.4 | NotificationhwEmmEmuHardwareRecoverTrap | current | The agent generates this trap when the a Hardware exception Recover | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.5 | NotificationhwEmmEmuAutofindFailTrap | current | The agent generates this trap when the emu autofind fail. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.6 | NotificationhwEmmEmuFanStateTrap | current | The agent generates this trap when the fan is not configured or fails. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.7 | NotificationhwOpticalNodeFailTrap | current | The agent generates this trap when the communication of the OpticalNode with the host is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.8 | NotificationhwOpticalNodeRecoverTrap | current | The agent generates this trap when the communication of the OpticalNode with the host recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.9 | NotificationhwOpticalReceiverPowerFailTrap | current | The agent generates this trap when the optical power of OpticalReceiver is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.10 | NotificationhwOpticalReceiverPowerRecoverTrap | current | The agent generates this trap when the optical power of OpticalReceiver recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.11 | NotificationhwOpticalReceiverRFPowerFailTrap | current | The agent generates this trap when the RF power of OpticalReceiver is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.12 | NotificationhwOpticalReceiverRFPowerRecoverTrap | current | The agent generates this trap when the RF power of OpticalReceiver recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.13 | NotificationhwOpticalTransmitterPowerFailTrap | current | The agent generates this trap when the optical power of OpticalTransmitter is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.14 | NotificationhwOpticalTransmitterPowerRecoverTrap | current | The agent generates this trap when the optical power of OpticalTransmitter recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.15 | NotificationhwOpticalTransmitterBiasFailTrap | current | The agent generates this trap when the optical bias of OpticalTransmitter is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.16 | NotificationhwOpticalTransmitterBiasRecoverTrap | current | The agent generates this trap when the optical bias of OpticalTransmitter recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.17 | NotificationhwOpticalDualChnProtectSwitchTrap | current | The agent generates this trap when the dual-channel optical occur protect-switch channel. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.18 | NotificationhwOpticalReceiverDualChnPowerFailTrap | current | The agent generates this trap when the optical power of dual-channel OpticalReceiver is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.19 | NotificationhwOpticalReceiverDualChnPowerRecoverTrap | current | The agent generates this trap when the optical power of dual-channel OpticalReceiver recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.20 | NotificationhwModuleOpticalTransmitterPowerFailTrap | current | The agent generates this trap when the optical power of OpticalTransmitter is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.21 | NotificationhwModuleOpticalTransmitterPowerRecoverTrap | current | The agent generates this trap when the optical power of OpticalTransmitter recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.22 | NotificationhwModuleOpticalTransmitterBiasRecoverTrap | current | The agent generates this trap when the optical bias of OpticalTransmitter recovers to normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.23 | NotificationhwModuleOpticalTransmitterBiasFailTrap | current | The agent generates this trap when the optical bias of OpticalTransmitter is abnormal. | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.24 | NotificationhwModuleOpticalCombinerRFPowerFailTrap | current | The agent generates this trap when the dual-channel OpticalReceiver use the combiner protect-switch channel policy and the RF power of dual-channel OpticalRece… | |
| 1.3.6.1.4.1.2011.6.1.4.2.1.0.25 | NotificationhwModuleOpticalCombinerRFPowerRecoverTrap | current | The agent generates this trap when the dual-channel OpticalReceiver use the combiner protect-switch channel policy and the RF power of dual-channel OpticalRece… | |
| 1.3.6.1.4.1.2011.6.1.4.2.2 | NodehwEnvironAnaAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.2.2.0 | NodehwEnvironAnaAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.1 | NotificationhwEmmAnaUnnamedFaultTrap | current | The agent generates this trap when an unnamed analog alarm occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.2 | NotificationhwEmmAnaUnnamedRecoverTrap | current | The agent generates this trap when an unnamed analog alarm recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.3 | NotificationhwEmmAnaTempFaultTrap | current | The agent generates this trap when the analog temperature alarm occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.4 | NotificationhwEmmAnaTempRecoverTrap | current | The agent generates this trap when the analog temperature alarm recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.5 | NotificationhwEmmAnaHumyFaultTrap | current | The agent generates this trap when the analog humidity alarm occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.6 | NotificationhwEmmAnaHumyRecoverTrap | current | The agent generates this trap when the analog humidity alarm recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.7 | NotificationhwEmmAnaVoltFaultTrap | current | The agent generates this trap when the analog voltage alarm occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.8 | NotificationhwEmmAnaVoltRecoverTrap | current | The agent generates this trap when the analog voltage alarm recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.9 | NotificationhwEmmAnaCurrentFaultTrap | current | The agent generates this trap when the analog current alarm occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.2.0.10 | NotificationhwEmmAnaCurrentRecoverTrap | current | The agent generates this trap when the analog current alarm recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3 | NodehwEnvironDigAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.1.4.2.3.0 | NodehwEnvironDigAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.1 | NotificationhwEmmDigFanBlockFaultTrap | current | The agent generates this trap when the fan is blocked. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.2 | NotificationhwEmmDigFanBlockRecoverTrap | current | The agent generates this trap when the fan is recovered from block. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.3 | NotificationhwEmmDigFanTempHighFaultTrap | current | The agent generates this trap when the temperature of fan is too high. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.4 | NotificationhwEmmDigFanTempHighRecoverTrap | current | The agent generates this trap when the temperature of fan recover from too high. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.5 | NotificationhwEmmDigUnnamedFaultTrap | current | The agent generates this trap when a unnamed digital fault occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.6 | NotificationhwEmmDigUnnamedRecoverTrap | current | The agent generates this trap when a unnamed digital recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.7 | NotificationhwEmmDigOutputswitchFaultTrap | current | The agent generates this trap when Output switch digital fault occurs. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.8 | NotificationhwEmmDigOutputswitchRecoverTrap | current | The agent generates this trap when Output switch digital recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.11 | NotificationhwEmmDigAcvolFaultTrap | current | The agent generates this trap when The AC voltage is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.12 | NotificationhwEmmDigAcvolRecoverTrap | current | The agent generates this trap when The AC voltage recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.13 | NotificationhwEmmDigAcswitchFaultTrap | current | The agent generates this trap when The AC switch is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.14 | NotificationhwEmmDigAcswitchRecoverTrap | current | The agent generates this trap when The AC switch recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.15 | NotificationhwEmmDigBattvolFaultTrap | current | The agent generates this trap when The batt vol is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.16 | NotificationhwEmmDigBattvolRecoverTrap | current | The agent generates this trap when The batt vol recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.17 | NotificationhwEmmDigBattfuseFaultTrap | current | The agent generates this trap when The battery fuse is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.18 | NotificationhwEmmDigBattfuseRecoverTrap | current | The agent generates this trap when The battery fuse recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.19 | NotificationhwEmmDigLoadfuseFaultTrap | current | The agent generates this trap when The load fuse is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.20 | NotificationhwEmmDigLoadfuseRecoverTrap | current | The agent generates this trap when The load fuse recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.21 | NotificationhwEmmDigRectifierFaultTrap | current | The agent generates this trap when The Rectifier is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.22 | NotificationhwEmmDigRectifierRecoverTrap | current | The agent generates this trap when The Rectifier recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.23 | NotificationhwEmmDigDcpowerFaultTrap | current | The agent generates this trap when The dc-power is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.24 | NotificationhwEmmDigDcpowerRecoverTrap | current | The agent generates this trap when The dc-power recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.25 | NotificationhwEmmDigRoomdoorFaultTrap | current | The agent generates this trap when The Roomdoor is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.26 | NotificationhwEmmDigRoomdoorRecoverTrap | current | The agent generates this trap when The Roomdoor recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.27 | NotificationhwEmmDigTheftFaultTrap | current | The agent generates this trap when The Roomdoor is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.28 | NotificationhwEmmDigTheftRecoverTrap | current | The agent generates this trap when The Roomdoor recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.29 | NotificationhwEmmDigWiringFaultTrap | current | The agent generates this trap when The WIRING is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.30 | NotificationhwEmmDigWiringRecoverTrap | current | The agent generates this trap when The WIRING recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.31 | NotificationhwEmmDigFanFaultTrap | current | The agent generates this trap when The FAN is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.32 | NotificationhwEmmDigFanRecoverTrap | current | The agent generates this trap when The FAN recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.33 | NotificationhwEmmDigFireFaultTrap | current | The agent generates this trap when The Fire is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.34 | NotificationhwEmmDigFireRecoverTrap | current | The agent generates this trap when The Fire recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.35 | NotificationhwEmmDigFogFaultTrap | current | The agent generates this trap when The Fog is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.36 | NotificationhwEmmDigFogRecoverTrap | current | The agent generates this trap when The Fog recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.37 | NotificationhwEmmDigWaterFaultTrap | current | The agent generates this trap when The Water is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.38 | NotificationhwEmmDigWaterRecoverTrap | current | The agent generates this trap when The Water recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.39 | NotificationhwEmmDigDieselFaultTrap | current | The agent generates this trap when The Diesel is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.40 | NotificationhwEmmDigDieselRecoverTrap | current | The agent generates this trap when The Diesel recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.41 | NotificationhwEmmDigSmellFaultTrap | current | The agent generates this trap when The Smell is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.42 | NotificationhwEmmDigSmellRecoverTrap | current | The agent generates this trap when The Smell recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.43 | NotificationhwEmmDigAirconditionFaultTrap | current | The agent generates this trap when The Air condition is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.44 | NotificationhwEmmDigAirconditionRecoverTrap | current | The agent generates this trap when The Air condition recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.45 | NotificationhwEmmDigArrsterFaultTrap | current | The agent generates this trap when The arrester is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.46 | NotificationhwEmmDigArrsterRecoverTrap | current | The agent generates this trap when The arrester recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.47 | NotificationhwEmmDigDcvolFaultTrap | current | The agent generates this trap when The DC VOL is out of the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.48 | NotificationhwEmmDigDcvolRecoverTrap | current | The agent generates this trap when The DC VOL recovers to the normal range. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.49 | NotificationhwEmmFanCriticalBlockFaultTrap | current | The agent generates this trap when more than two fans are blocked. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.50 | NotificationhwEmmFanCriticalBlockRecoverTrap | current | The agent generates this trap when the critical multi-fan blocking recovers. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.51 | NotificationhwEmmDigitalSwitchOpenTrap | current | The agent generates this trap when the 48V input switch is closed. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.52 | NotificationhwEmmDigitalSwitchCloseTrap | current | The agent generates this trap when the 48V input switch is opened. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.53 | NotificationhwEmmDigFanSpeedAbnormalTrap | current | The agent generates this trap when the fan rotation speed deteriorates. | |
| 1.3.6.1.4.1.2011.6.1.4.2.3.0.54 | NotificationhwEmmDigFanSpeedRecoverTrap | current | The agent generates this trap when fan rotation speed deterioration recovers. | |
| 1.3.6.1.4.1.2011.6.1.5 | NodehwEmmTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.1.5.1 | ScalarhwFanStatus | accessible-for-notify | current | The status of the fan. Options: 1.notconfig(1) -The status of the fan is notconfig 2.failure(2) -The status of the fan is fail |
| 1.3.6.1.4.1.2011.6.1.5.2 | ScalarhwFailureCause | accessible-for-notify | current | The reason of the auto-finding failure: Options: 1.fullemu(1) -No enough EMU IDs are available 2.shelfnotsupport(2) -The EMU does not support the auto discover… |
| 1.3.6.1.4.1.2011.6.1.5.3 | ScalarhwEnvAutofindNodeId | accessible-for-notify | current | The NodeId of the auto-found EMU. |
| 1.3.6.1.4.1.2011.6.1.5.4 | ScalarhwEnvAutofindEmuType | accessible-for-notify | current | The type of the auto-found EMU. |
| 1.3.6.1.4.1.2011.6.1.5.5 | ScalarhwEnvAutofindBoardName | accessible-for-notify | current | The board name of the auto-found EMU. |
| 1.3.6.1.4.1.2011.6.1.5.6 | ScalarhwOROpticalPowerValueTrap | accessible-for-notify | current | The optical power value of Optical receiver. |
| 1.3.6.1.4.1.2011.6.1.5.7 | ScalarhwORRFPowerValueTrap | accessible-for-notify | current | The RF power value of Optical receiver. |
| 1.3.6.1.4.1.2011.6.1.5.8 | ScalarhwOTOpticalOutputPowerValueTrap | accessible-for-notify | current | The optical power value of Optical transmitter. |