HUAWEI-GONU-MIB
174 objects
This MIB is used for defining GPON NNI MIB objects. GPON NNI refers to PON interface at ONU.
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfIntervalThreshold HCPerfTimeElapsed |
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiMgmt |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.104 | IdentityhwGponMIB | This MIB is used for defining GPON NNI MIB objects. GPON NNI refers to PON interface at ONU. | ||
| 1.3.6.1.4.1.2011.5.104.1 | NodehwGponOnu | |||
| 1.3.6.1.4.1.2011.5.104.1.0 | NodehwGonuNotifications | |||
| 1.3.6.1.4.1.2011.5.104.1.0.1 | NotificationhwGonuLinkLOSTrap | current | This trap is sent when the LOS(Loss of Signal) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.2 | NotificationhwGonuLinkLOFTrap | current | This trap is sent when the LOF(Loss of Frame) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.3 | NotificationhwGonuLinkSFTrap | current | This trap is sent when the SF(Signal Fail) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.4 | NotificationhwGonuLinkSDTrap | current | This trap is sent when the SD(Signal Degrade) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.5 | NotificationhwGonuLinkLCDGTrap | current | This trap is sent when the LCDG(Loss of Channel Delineation for GEM) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.6 | NotificationhwGonuLinkRDITrap | current | This trap is sent when the RDI(Remote Defect Indication) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.7 | NotificationhwGonuLinkSUFTrap | current | This trap is sent when the SUF(Start Up Failure) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.8 | NotificationhwGonuLinkDACTTrap | current | This trap is sent when the DACT(Deactivate (ONU-ID)) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.9 | NotificationhwGonuLinkDISTrap | current | This trap is sent when the DIS(Disabled (ONU serial number)) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.10 | NotificationhwGonuLinkMISTrap | current | This trap is sent when the MIS((link) Mismatch) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.11 | NotificationhwGonuLinkPEETrap | current | This trap is sent when the PEE(Physical Equipment Error) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.12 | NotificationhwGonuLinkTFTrap | current | This trap is sent when the TF(Transmitter Failure) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.13 | NotificationhwGonuLinkMEMTrap | current | This trap is sent when the MEM(Message Error Message) alarm of GPON ONU occures. | |
| 1.3.6.1.4.1.2011.5.104.1.0.14 | NotificationhwGonuLinkMISRestoreTrap | current | This trap is sent when the link mismatch of ONT(MIS) recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.15 | NotificationhwGonuLinkPEERestoreTrap | current | This trap is sent when the OLT recovers from the physical equipment error. | |
| 1.3.6.1.4.1.2011.5.104.1.0.16 | NotificationhwGonuTempExceedThreAlarmTrap | current | This trap is sent when the temperature of GPON optical-module exceeded alarm threshold. | |
| 1.3.6.1.4.1.2011.5.104.1.0.17 | NotificationhwGonuTempExceedThreRestoreAlarmTrap | current | This trap is sent when the temperature of GPON ONU's optical-module exceeded alarm threshold recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.18 | NotificationhwGonuVoltExceedThreAlarmTrap | current | This trap is sent when the voltage of GPON ONU's optical-module exceeded alarm threshold. | |
| 1.3.6.1.4.1.2011.5.104.1.0.19 | NotificationhwGonuVoltExceedThreRestoreAlarmTrap | current | This trap is sent when the voltage of GPON ONU's optical-module exceeded alarm threshold recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.20 | NotificationhwGonuBiasExceedThreAlarmTrap | current | This trap is sent when the bias current of GPON ONU's optical module exceeded alarm threshold. | |
| 1.3.6.1.4.1.2011.5.104.1.0.21 | NotificationhwGonuBiasExceedThreRestoreAlarmTrap | current | This trap is sent when the bias current of GPON ONU's optical module exceeded alarm threshold recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.22 | NotificationhwGonuTxPowerExceedThreAlarmTrap | current | This trap is sent when the tx-power of GPON ONU's optical-module exceeded alarm threshold. | |
| 1.3.6.1.4.1.2011.5.104.1.0.23 | NotificationhwGonuTxPowerExceedThreRestoreAlarmTrap | current | This trap is sent when the tx-power of GPON ONU's optical-module exceeded alarm threshold recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.24 | NotificationhwGonuRxPowerExceedThreRestoreAlarmTrap | current | This trap is sent when the rx-power of GPON ONU's optical-module exceeded alarm threshold. | |
| 1.3.6.1.4.1.2011.5.104.1.0.25 | NotificationhwGonuRxPowerExceedThreAlarmTrap | current | This trap is sent when the rx-power of GPON ONU's optical-module exceeded alarm threshold recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.26 | NotificationhwGonuROGUEOntFailAlarmTrap | current | This trap is sent when the ONU's optical-module always send laser. | |
| 1.3.6.1.4.1.2011.5.104.1.0.27 | NotificationhwGonuROGUEOntRestoreAlarmTrap | current | This trap is sent when the ONU's optical-module always send laser alarm recoveres. | |
| 1.3.6.1.4.1.2011.5.104.1.0.28 | NotificationhwGponnniOntLinkLosAlarmTrap | current | This trap is sent when the fiber is broken or ONT can not receive any expected optical signals(LOS). | |
| 1.3.6.1.4.1.2011.5.104.1.0.29 | NotificationhwGponnniOntLinkLofAlarmTrap | current | This trap is sent when the loss of frame (LOF) occurs at the ONT. | |
| 1.3.6.1.4.1.2011.5.104.1.0.30 | NotificationhwGponnniOntLinkSfAlarmTrap | current | This trap is sent when the signal failed (SF) occurs at the ONT. | |
| 1.3.6.1.4.1.2011.5.104.1.0.31 | NotificationhwGponnniOntLinkSdAlarmTrap | current | This trap is sent when the signal degrade (SD) occurs at the ONT. | |
| 1.3.6.1.4.1.2011.5.104.1.0.32 | NotificationhwGponnniOntLinkLcdgFailAlarmTrap | current | This trap is sent when the loss of GEM channel delineation (LCDG) occurs at the ONT. | |
| 1.3.6.1.4.1.2011.5.104.1.0.33 | NotificationhwGponnniOntLinkSufFailAlarmTrap | current | This trap is sent when the ranging of the ONT failure (SUF) occurs. | |
| 1.3.6.1.4.1.2011.5.104.1.0.34 | NotificationhwGponnniOntLinkLosRestoreAlarmTrap | current | This trap is sent when the loss of signal (LOS) at the ONT recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.35 | NotificationhwGponnniOntLinkLofRestoreAlarmTrap | current | This trap is sent when the loss of frame (LOF) at the ONT recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.36 | NotificationhwGponnniOntLinkSfRestoreAlarmTrap | current | This trap is sent when the signal failure (SF) at the ONT recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.37 | NotificationhwGponnniOntLinkSdRestoreAlarmTrap | current | This trap is sent when the signal degrade (SD) at the ONT recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.38 | NotificationhwGponnniOntLinkLcdgRestoreAlarmTrap | current | This trap is sent when the loss of GEM channel delineation (LCDG) at the ONT recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.0.39 | NotificationhwGponnniOntLinkSufRestoreAlarmTrap | current | This trap is sent when the ranging of ONT failure (SUF) recovers. | |
| 1.3.6.1.4.1.2011.5.104.1.1 | NodehwGonuStatus | |||
| 1.3.6.1.4.1.2011.5.104.1.1.1 | TablehwGonuStatusTable | not-accessible | current | The table hwGonuStatusTable contains configuration and status parameters of the GPON ONU. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1 | RowhwGonuStatusEntry | not-accessible | current | The table hwGonuStatusTable contains configuration and status parameters of the GPON ONU. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.1 | ColumnhwGonuLinkStatus | read-only | current | The port link status, Options: 1.linkDown(1) -Link down 2.linkUp(2) -Link up |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.2 | ColumnhwGonuRegStatus | read-only | current | The port register status, Options: 1. registerPass(1) -The port is authenticated successfully 2. registerFail(2) -The port fails to be authenticated |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.3 | ColumnhwGonuRxSpeed | read-only | current | The port down stream speed capability. Unit: kbps |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.4 | ColumnhwGonuTxSpeed | read-only | current | The port up stream speed capability. Unit: kbps |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.5 | ColumnhwGonuRxBitErr | read-only | current | The port down stream bit error ratio. Unit: bits/100ms |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.6 | ColumnhwGonuPloamStates | read-only | current | The gpon onu PLOAM states. Options: 1. initial(1) -Initial state 2. standby(2) -Standby state 3. serialNumber(3) -Serial_Number state 4. ranging(4) -Ranging st… |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.7 | ColumnhwGonuOmciPortID | read-only | current | Indicates the ID of the GEM port corresponding to the OMCI. 4294967295 represents invalid value. |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.8 | ColumnhwGonuTxPower | read-only | current | The MDU TX power. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.9 | ColumnhwGonuRxPower | read-only | current | The MDU RX power. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.10 | ColumnhwGonuTemperature | read-only | current | The MDU Current Temperature. Unit: 1/100 degree centigrade |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.11 | ColumnhwGonuBiasCurrent | read-only | current | The MDU Laser Bias Current. Unit: 1/100 mA |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.12 | ColumnhwGonuVoltage | read-only | current | The MDU Voltage. Unit: 1/100 mV |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.13 | ColumnhwGonuRogueOntState | read-only | current | Indicates whether the optical port is shut down due to the continuous mode(rogue ONU). Options: 1. yes(1) - The optical port is shut down due to the continuous… |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.14 | ColumnhwGonuOpticsModuleType | read-only | current | This object indicates the type of the optical transceiver. Options: 1. unknown(1) - Unknow 2. gpon(2) - GPON 3. epon(3) - EPON 4. epon10g(4) - 10G EPON 5. gpon… |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.15 | ColumnhwGonuOpticsModuleSubType | read-only | current | This object indicates the sub type of the optical transceiver. Options: 1.unknown(1) - Unknow 2.classbplus(101) - CLASS B+ 3.classcplus(102) - CLASS C+ 4.class… |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.16 | ColumnhwGonuOpticsModuleUsedType | read-only | current | This object indicates the application scenario of the optical transceiver. Options: 1.unknown(1) - Unknow 2.olt(2) - OLT 3.onu(4) - ONU 4.invalid(-1) - Indicat… |
| 1.3.6.1.4.1.2011.5.104.1.1.1.1.17 | ColumnhwGonuOpticsModuleEncapsulationType | read-only | current | This object indicates the encapsulation information about the optical transceiver. Options: 1. unknown(1) - Unknown 2. sff2x5(2) - SFF 2x5 3. sff2x10(3) - SFF … |
| 1.3.6.1.4.1.2011.5.104.1.2 | NodehwGonuStatistics | |||
| 1.3.6.1.4.1.2011.5.104.1.2.1 | TablehwGonuStatisticsTable | not-accessible | current | The table hwGonuStatisticsTable contains statistics of the GPON ONU GMAC. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1 | RowhwGonuStatisticsEntry | not-accessible | current | The table hwGonuStatisticsTable contains statistics of the GPON ONU GMAC. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.1 | ColumnhwGonuTxOmciCellsCnt | read-only | current | The port transmit OMCI cells count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.2 | ColumnhwGonuRxOmciCellsCnt | read-only | current | The port receive OMCI cells count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.3 | ColumnhwGonuTxEthFramesCnt | read-only | current | The port transmit ethernet frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.4 | ColumnhwGonuRxEthFramesCnt | read-only | current | The port receive ethernet frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.5 | ColumnhwGonuTxPloamCellsCnt | read-only | current | The port transmit PLOAM cells count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.6 | ColumnhwGonuRxPloamCellsCnt | read-only | current | The port receive PLOAM cells count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.7 | ColumnhwGonuRxServiceFramesCnt | read-only | current | The port receive service frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.8 | ColumnhwGonuStatisticsClear | read-write | current | Clear the statistics of this port. Options: 1. resetStat(1) - Clear the statistics 2. invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.9 | ColumnhwGonuRxGemFramesCnt | read-only | current | The port receive GEM frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.10 | ColumnhwGonuTxGemFramesCnt | read-only | current | The port transmit GEM frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.11 | ColumnhwGonuRxCpuFramesCnt | read-only | current | The CPU receive frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.12 | ColumnhwGonuRxDiscardEthFramesCnt | read-only | current | The port discard receive ethernet frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.13 | ColumnhwGonuRxAndTxDiscardEthFramesCnt | read-only | current | The up and down discard ethernet frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.14 | ColumnhwGonuRxFrames | read-only | current | The PON receive frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.15 | ColumnhwGonuPonRxOctetsCnt | read-only | current | The PON receive bytes. Unit: Bytes |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.16 | ColumnhwGonuRxUnicastFrames | read-only | current | The PON receive unicast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.17 | ColumnhwGonuRxMulticastFrames | read-only | current | The PON receive multicast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.18 | ColumnhwGonuRxBroadcastFrames | read-only | current | The PON receive broadcast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.19 | ColumnhwGonuRx64BytesFrames | read-only | current | The PON receive frames of 64 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.20 | ColumnhwGonuRx65to127BytesFrames | read-only | current | The PON receive frames of 65~127 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.21 | ColumnhwGonuRx128to255BytesFrames | read-only | current | The PON receive frames of 128~255 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.22 | ColumnhwGonuRx256to511BytesFrames | read-only | current | The PON receive frames of 256~511 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.23 | ColumnhwGonuRx512to1023BytesFrames | read-only | current | The PON receive frames of 512~1023 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.24 | ColumnhwGonuRx1024to1518BytesFrames | read-only | current | The PON receive frames of 1024~1518 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.25 | ColumnhwGonuRxOver1518BytesFrames | read-only | current | The PON receive frames of over 1518 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.26 | ColumnhwGonuRxUndersizeFrames | read-only | current | The PON receive under size frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.27 | ColumnhwGonuRxOversizeFrames | read-only | current | The PON receive over size frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.28 | ColumnhwGonuRxCrcErrorFrames | read-only | current | The PON receive crc error frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.29 | ColumnhwGonuRxDiscardedFrames | read-only | current | The PON receive discarded frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.30 | ColumnhwGonuTxFrames | read-only | current | The PON send frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.31 | ColumnhwGonuPonTxOctetsCnt | read-only | current | The PON send bytes. Unit: Bytes |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.32 | ColumnhwGonuTxUnicastFrames | read-only | current | The PON send unicast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.33 | ColumnhwGonuTxMulticastFrames | read-only | current | The PON send multicast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.34 | ColumnhwGonuTxBroadcastFrames | read-only | current | The PON send broadcast frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.35 | ColumnhwGonuTx64BytesFrames | read-only | current | The PON send frames of 64 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.36 | ColumnhwGonuTx65to127BytesFrames | read-only | current | The PON send frames of 65~127 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.37 | ColumnhwGonuTx128to255BytesFrames | read-only | current | The PON send frames of 128~255 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.38 | ColumnhwGonuTx256to511BytesFrames | read-only | current | The PON send frames of 256~511 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.39 | ColumnhwGonuTx512to1023BytesFrames | read-only | current | The PON send frames of 512~1023 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.40 | ColumnhwGonuTx1024to1518BytesFrames | read-only | current | The PON send frames of 1024~1518 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.41 | ColumnhwGonuTxOver1518BytesFrames | read-only | current | The PON send frames of over 1518 bytes. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.42 | ColumnhwGonuPonRxErrFramesCnt | read-only | current | The receive error ethernet frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.43 | ColumnhwGonuTxServiceFramesCnt | read-only | current | The port transmit service frames count. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.44 | ColumnhwGonuTxDiscardedFrames | read-only | current | The PON transmit discarded frames. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.45 | ColumnhwGonuRxTraffic | read-only | current | Indicates the received traffic of this port, in the unit of kbit/s. 18446744073709551615(0xFFFFFFFFFFFFFFFF) indicates an invalid value. |
| 1.3.6.1.4.1.2011.5.104.1.2.1.1.46 | ColumnhwGonuTxTraffic | read-only | current | Indicates the transmitted traffic of this port, in the unit of kbit/s. 18446744073709551615(0xFFFFFFFFFFFFFFFF) indicates an invalid value. |
| 1.3.6.1.4.1.2011.5.104.1.3 | NodehwGonuTcont | |||
| 1.3.6.1.4.1.2011.5.104.1.3.1 | TablehwGonuTcontTable | not-accessible | current | The table hwGonuTcontTable contains T-Cont of the ONU that is allocated by OLT. The index of this table is a combination of ifIndex and hwGonuTcontIdIndex. |
| 1.3.6.1.4.1.2011.5.104.1.3.1.1 | RowhwGonuTcontEntry | not-accessible | current | The table hwGonuTcontTable contains T-Cont of the ONU that is allocated by OLT. The index of this entry is a combination of ifIndex and hwGonuTcontIdIndex. |
| 1.3.6.1.4.1.2011.5.104.1.3.1.1.1 | ColumnhwGonuTcontIdIndex | read-only | current | The index of the T-Cont |
| 1.3.6.1.4.1.2011.5.104.1.3.1.1.2 | ColumnhwGonuAllocId | read-only | current | The alloc id of the T-Cont |
| 1.3.6.1.4.1.2011.5.104.1.4 | NodehwGonuAuth | |||
| 1.3.6.1.4.1.2011.5.104.1.4.1 | TablehwGonuAuthTable | not-accessible | current | The table hwGonuAuthTable contains GPON ONU authentication information. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1 | RowhwGonuAuthEntry | not-accessible | current | The table hwGonuAuthTable contains GPON ONU authentication information. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.1 | ColumnhwGonuSerialNumber | read-only | current | The serial number of the GPON ONU. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.2 | ColumnhwGonuPassWord | read-write | current | The password of the GPON ONU. GPON password size (0..10). XG-PON password size (0..36). |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.3 | ColumnhwGonuMutualAuthPassword | read-write | current | The hex mutual authentication password of the GPON ONU. This node should be set with hwGonuMutualAuthSwitch. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.4 | ColumnhwGonuLoid | read-write | current | The loid value of the GPON ONU. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.5 | ColumnhwGonuCheckCode | read-write | current | The checkcode value of the GPON ONU. |
| 1.3.6.1.4.1.2011.5.104.1.4.1.1.6 | ColumnhwGonuMutualAuthSwitch | read-write | current | The switch for the mutual authentication function. Options: 1. enable(1) - enable the mutual authentication function 2. disable(2) - disable the mutual authent… |
| 1.3.6.1.4.1.2011.5.104.1.5 | NodehwGponNNICfg | |||
| 1.3.6.1.4.1.2011.5.104.1.5.1 | TablehwGponNNICfgTable | not-accessible | current | The table hwGponNNICfgTable config the GEM traffic descriptor that specifies the maximum rate. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.5.1.1 | RowhwGponNNICfgEntry | not-accessible | current | The table hwGponNNICfgTable config the GEM traffic descriptor that specifies the maximum rate. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.5.1.1.1 | ColumnhwGponNNITrafficBroadcast | read-write | current | Traffic broadcast of GPON Port, Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 … |
| 1.3.6.1.4.1.2011.5.104.1.5.1.1.2 | ColumnhwGponNNITrafficMulticast | read-write | current | Traffic multicast of GPON Port, Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 … |
| 1.3.6.1.4.1.2011.5.104.1.5.1.1.3 | ColumnhwGponNNITrafficUnknowncast | read-write | current | Traffic unicast of GPON Port, Traffic suppression ID definition: NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps) 1 6 145 12 2 12 291 24 3 24 58… |
| 1.3.6.1.4.1.2011.5.104.1.5.2 | ScalarhwXponNNIUplinkMode | read-write | current | The object is used to config the uplink mode of PON ports. Options: 1.independent(1) - The uplink mode is independent 2.activeStandby(2) - The uplink mode is a… |
| 1.3.6.1.4.1.2011.5.104.1.6 | NodehwGponNNIHistoryStats | |||
| 1.3.6.1.4.1.2011.5.104.1.6.1 | TablehwGponNNIHistoryStatsTable | not-accessible | current | The table of GponNNI History Statistic. The index of this table is a combination of ifIndex, hwGponStatsIntervalType and hwGponStatsIntervalNum. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1 | RowhwGponNNIHistoryStatsEntry | not-accessible | current | The table of GponNNI History Statistic. The index of this entry is a combination of ifIndex, hwGponStatsIntervalType and hwGponStatsIntervalNum. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.1 | ColumnhwGponStatsIntervalType | not-accessible | current | The type of GponNNI History Statistic, Options: 1. intervaltime15min(0) - The gponNNI history statistic in 15 minutes 2. intervaltime24h(1) - The gponNNI histo… |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.2 | ColumnhwGponStatsIntervalNum | not-accessible | current | The interval number of GponNNI History Statistic. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.3 | ColumnhwGponStatsRxOmciMsg | read-only | current | The number of received OMCI messages. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.4 | ColumnhwGponStatsTxOmciMsg | read-only | current | The number of transmited OMCI messages. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.5 | ColumnhwGponStatsRxPloamMsg | read-only | current | The number of received PLOAM messages. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.6 | ColumnhwGponStatsTxPloamMsg | read-only | current | The number of transmited PLOAM messages. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.7 | ColumnhwGponStatsRxGemFrames | read-only | current | The number of received GEM frames. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.8 | ColumnhwGponStatsTxGemFrames | read-only | current | The number of transmited GEM frames. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.9 | ColumnhwGponStatsRxEthFrames | read-only | current | The number of received Ethernet frames. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.10 | ColumnhwGponStatsTxEthFrames | read-only | current | The number of transmited Ethernet frames. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.11 | ColumnhwGponStatsRxDiscardEthFrames | read-only | current | The number of discarded Ethernet frames. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.12 | ColumnhwGponTimeElapsed | read-only | current | The elapsed time of the current interval. |
| 1.3.6.1.4.1.2011.5.104.1.6.1.1.13 | ColumnhwGponValidInterval | read-only | current | Whether the interval number is valid. |
| 1.3.6.1.4.1.2011.5.104.1.7 | NodehwGonuAlarmThreshold | |||
| 1.3.6.1.4.1.2011.5.104.1.7.1 | TablehwGonuAlarmThresholdTable | not-accessible | current | The table GponNni alarm threshold. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1 | RowhwGonuAlarmThresholdEntry | not-accessible | current | The table GponNni alarm threshold. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.1 | ColumnhwGonuRxPowerUpperThreshold | read-write | current | The MDU Rx-power upper limit threshold. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.2 | ColumnhwGonuRxPowerLowerThreshold | read-write | current | The MDU Rx-power lower limit threshold. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.3 | ColumnhwGonuTxPowerUpperThreshold | read-write | current | The MDU Tx-power upper limit threshold. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.4 | ColumnhwGonuTxPowerLowerThreshold | read-write | current | The MDU Tx-power lower limit threshold. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.5 | ColumnhwGonuBiasUpperThreshold | read-write | current | The MDU bias current upper limit threshold. Unit: mA |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.6 | ColumnhwGonuBiasLowerThreshold | read-write | current | The MDU bias current lower limit threshold. Unit: mA |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.7 | ColumnhwGonuTemperatureUpperThreshold | read-write | current | The MDU Temperature upper limit threshold. Unit: 1/100 degree centigrade |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.8 | ColumnhwGonuTemperatureLowerThreshold | read-write | current | The MDU Temperature lower limit threshold. Unit: 1/100 degree centigrade |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.9 | ColumnhwGonuVoltageUpperThreshold | read-write | current | The MDU Voltage upper limit threshold. Unit: 1/100 V |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.10 | ColumnhwGonuVoltageLowerThreshold | read-write | current | The MDU Voltage lower limit threshold. Unit: 1/100 V |
| 1.3.6.1.4.1.2011.5.104.1.7.1.1.11 | ColumnhwGonuClearThreshold | read-write | current | Clear the MDU threshold. Options: 1. invalid(0) - The MDU threshold clear state is invalid. 2. clear(1) - Clear the MDU threshold. 3. cleared(32767) - The MDU … |
| 1.3.6.1.4.1.2011.5.104.1.8 | NodehwGonuTrapsVbOids | |||
| 1.3.6.1.4.1.2011.5.104.1.8.1 | ScalarhwGonuOperType | accessible-for-notify | current | Operation type. Options: 1. add(1) - Add 2. modify(2) - Modify 3. delete(3) - Delete |
| 1.3.6.1.4.1.2011.5.104.1.9 | NodehwGonuOltPonId | |||
| 1.3.6.1.4.1.2011.5.104.1.9.1 | TablehwGonuOltPonIdTable | not-accessible | current | Indicates the current statistics table of a CMTS upstream channel. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.9.1.1 | RowhwGonuOltPonIdEntry | not-accessible | current | Indicates the current statistics table of a CMTS upstream channel. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.104.1.9.1.1.1 | ColumnhwGonuOltPonModuleSubType | read-only | current | OLT PON Module sub-type. Options: 1. unknown(1) - Unknown type 2. classa(2) - GPON ODN budget class A 3. classb(3) - GPON ODN budget class B 4. classbplus(4) -… |
| 1.3.6.1.4.1.2011.5.104.1.9.1.1.2 | ColumnhwGonuOltPonTxPower | read-only | current | OLT PON TX power. Unit: 1/100 dBm |
| 1.3.6.1.4.1.2011.5.104.1.9.1.1.3 | ColumnhwGonuOltPonIdentifier | read-only | current | OLT PON-identifier. The length of GPON's PON-identifier is 7, and the length of XG-PON's PON-identifier is 4. |
| 1.3.6.1.4.1.2011.5.104.2 | NodehwGonuTraps | |||
| 1.3.6.1.4.1.2011.5.104.2.1 | NodehwGonuCommonTraps | |||
| 1.3.6.1.4.1.2011.5.104.2.1.0 | NodehwGonuCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.104.2.1.0.1 | NotificationhwGonuAuthChangeTrap | current | This trap is sent when the authentication information changes. |