MIB Viewer

HUAWEI-L2VLAN-MIB

484 objects
add a mib node hwL2QinQVlanInnerRemark.
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.5.25.42NodehwL2Mgmt
1.3.6.1.4.1.2011.5.25.42.3IdentityhwL2Vlanadd a mib node hwL2QinQVlanInnerRemark.
1.3.6.1.4.1.2011.5.25.42.3.1NodehwL2VlanMngObjects
1.3.6.1.4.1.2011.5.25.42.3.1.1NodehwL2VlanBase
1.3.6.1.4.1.2011.5.25.42.3.1.1.1TablehwL2VlanMIBTablenot-accessiblecurrentThis table shows the VLAN status information. It describes information about a VLAN, such as the type, interface list, and current status of the VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1RowhwL2VlanMIBEntrynot-accessiblecurrentEntries of vlan MIB table.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1ColumnhwL2VlanIndexnot-accessiblecurrentThe vlan-id or other identifier referring to this vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2ColumnhwL2VlanDescrread-createcurrentDescription of the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3ColumnhwL2VlanPortListread-createcurrentThe set of Ports which belong to the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4ColumnhwL2VlanTyperead-createcurrentThe value of this object identifies the type of a VLAN.Change the value from '2' to '1' indicates that the common-vlan is configured into super-vlan; Change th…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.5ColumnhwL2VlanUnknownUnicastProcessingread-createcurrentThe value of this object identifies whether the unknown unicast packet is broadcasted.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6ColumnhwL2VlanIfIndexread-onlycurrentWhether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is InterfaceIndex, else the value is -1.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7ColumnhwL2VlanMacLearnread-createcurrentThe value of this object identifies whether the VLAN multicast function is enabled.The value enabled(1) indicates vlan Multicasting is allowed; disable(2) indi…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.8ColumnhwL2VlanMulticastread-onlycurrentThe value enabled(1) indicates vlan Multicasting is allowed; disable(2) indicates it's closed. The default value is disable(2).
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.9ColumnhwL2VlanAdminStatusread-createcurrentThe value of this object identifies whether a VLAN is shut down.Value disable(2) indicates shutdown the vlan; enabled(1) indicates open the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.10ColumnhwL2VlanStatisStatusread-createcurrentThe value of this object identifies whether the VLAN statistics function is enabled.The value enabled(1) indicates Statistics onvlan are allowed; disable(2) in…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11ColumnhwL2VlanCreateStatusread-onlycurrentThe status indicates how the vlan is created, static configured by management or created dynamicly by GVRP.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12ColumnhwL2VlanRowStatusread-createcurrentThe value of this object identifies the row status recorded by the VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.13ColumnhwL2VlanBcastread-createcurrentWhether to broadcast the broadcast packets when ports receive it. enabled(1) indicates broadcast the packets,disable(2) indicates it'll discard the broadcast p…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.14ColumnhwL2VlanUnknownMulticastProcessingread-createcurrentWhether to broadcast the unknown multicast packets when ports receive it. broadcast(1) indicates broadcast the packet, discard(2) indicates it'll discard the u…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15ColumnhwL2VlanPropertyread-onlycurrentThe value of this object identifies the type of a VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.16ColumnhwL2VlanAgingTimeread-createcurrentThe aging time of MAC entry that associated with the vlan.'0' means will be never aged,'-1' means aging-time is not configured to the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17ColumnhwL2VlanNameread-createcurrentName of the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18ColumnhwL2VlanSmartMacLearnread-createcurrentThe value indicates whether the MAC address learning is opened, when the number of the port which is up state and belonging to the vlan is below and equal to t…
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.19ColumnhwL2VlanServiceNameread-createcurrentService name of the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20ColumnhwL2VlanManagementVlanread-createcurrentThis object indicates whether the VLAN is a management VLAN: enable: 1 disable: 2
1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21ColumnhwL2VlanDynamicVlanread-onlycurrentThis object indicates whether the VLAN is a dynamic VLAN: enable: 1 disable: 2
1.3.6.1.4.1.2011.5.25.42.3.1.2NodehwL2VlanApply
1.3.6.1.4.1.2011.5.25.42.3.1.2.1TablehwL2VlanStackingTablenot-accessiblecurrentThis is the table to configure the double tags for the incoming packets of the VLAN stacking interface. It describes the function to encapsulate the incoming p…
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1RowhwL2VlanStackingEntrynot-accessiblecurrentQinQ-port configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1ColumnhwL2VlanStackingPortIndexnot-accessiblecurrentIndex number of QinQ-port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2ColumnhwL2VlanStackingInsideVlanIdnot-accessiblecurrentInside vlan-id of QinQ-port, use it as the Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3ColumnhwL2VlanStackingOutsideVlanListLowread-createcurrentThis object indicates the low 2048 bits of the VLAN list, specifying the outer VLAN tag of incoming packets on the QinQ interface. Each bit corresponds to a VL…
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4ColumnhwL2VlanStackingOutsideVlanListHighread-createcurrentThis object indicates the high 2048 bits of the VLAN list, specifying the outer VLAN tag of incoming packets on the QinQ interface. Each bit corresponds to a V…
1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5ColumnhwL2VlanStackingRowStatusread-createcurrentThe value of this object identifies the row status of the double VLAN tag configuration table of the VLAN stacking interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2TablehwL2VlanMappingTablenot-accessiblecurrentThis is the table to configure the VLAN swapping on the VLAN mapping interface. It describes the mapping relationship in the VLAN substitution on the VLAN mapp…
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1RowhwL2VlanMappingEntrynot-accessiblecurrentQinQ-port configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1ColumnhwL2VlanMappingPortIndexnot-accessiblecurrentThis object indicates the index of an interface where VLAN mapping is configured.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2ColumnhwL2VlanMappingInsideVlanIdnot-accessiblecurrentThe value of this object identifies the VLAN ID. This object describes the VLAN ID after the replacement.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3ColumnhwL2VlanMappingOutsideVlanListLowread-createcurrentThis object indicates the low 2048 bits of the VLAN list. This object specifies the VLAN list to be replaced. Each bit corresponds to a VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4ColumnhwL2VlanMappingOutsideVlanListHighread-createcurrentThis object indicates the high 2048 bits of the VLAN list. This object specifies the VLAN list to be replaced. Each bit corresponds to a VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5ColumnhwL2VlanMappingRowStatusread-createcurrentThe value of this object identifies the row status of the modify replacement table of the VLAN mapping interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.3TablehwSuperVlanTablenot-accessiblecurrentThe table contains configuration and control information for the super vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1RowhwSuperVlanEntrynot-accessiblecurrentEntries of the super vlan table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1ColumnhwSuperVlanIdnot-accessiblecurrentThe super vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2ColumnhwSubVlanListLowread-writecurrentThe lowest possible value of the sub vlan list on the supervlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3ColumnhwSubVlanListHighread-writecurrentThe highest possible value of the sub vlan list on the supervlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.4TablehwL2InterfIsolateTablenot-accessiblecurrentThe table contains configuration and control information for interfaces isolate.
1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1RowhwL2InterfIsolateEntrynot-accessiblecurrentSecondary vlan lists of Isolate-vlans.
1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.1ColumnhwL2InterfIsolateVlanIdnot-accessiblecurrentvlan-id. The vlan into which interf-isolate is configured.
1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.2ColumnhwL2InterfIsolateInterflistLowread-writecurrentThe lowest possible value of Interface list on the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.3ColumnhwL2InterfIsolateInterflistHighread-writecurrentThe highest possible value of Interface list on the vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.5TablehwL2IsolatemappingTablenot-accessiblecurrentThe table contains mapping information between isolated ports.
1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1RowhwL2IsolatemappingEntrynot-accessiblecurrent
1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.1ColumnhwL2IsolatemappingPortNumnot-accessiblecurrentPort number.
1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.2ColumnhwL2IsolateInterflistLowread-writecurrentThe lowest possible value of Interface list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.3ColumnhwL2IsolateInterflistHighread-writecurrentThe highest possible value of Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6TablehwL2VlanStackingExtTablenot-accessiblecurrent
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1RowhwL2VlanStackingExtEntrynot-accessiblecurrent
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.1ColumnhwL2VlanStackingExtPortIndexnot-accessiblecurrentConfigured QinQ-Port Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.2ColumnhwL2VlanStackingExtVlanIdnot-accessiblecurrentThis vlan-id need be poped or pushed in interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.3ColumnhwL2VlanStackingExtActionnot-accessiblecurrentThe packet will be poped or pushed.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.4ColumnhwL2VlanStackingExtDirectionnot-accessiblecurrentThe direction which the packet need be poped or pushed. That is, the packet is receviced or transitted.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.5ColumnhwL2VlanStackingExtVlanListLowread-createcurrentIf hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, t…
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.6ColumnhwL2VlanStackingExtVlanListHighread-createcurrentIf hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, t…
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.7ColumnhwL2VlanStackingExtRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.8ColumnhwL2VlanStackingExtPriorityModeread-createcurrentThe priority mode of outer VLAN, the priority can be appointed or inherit from inner VLAN's priority.
1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.9ColumnhwL2VlanStackingExtVlan8021pread-createcurrentThe 8021p of outer VLAN ID after pushing, it's an optional field, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7TablehwL2VlanQinQTablenot-accessiblecurrentThe table contains global view configuration information for Flexible QinQ.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1RowhwL2VlanQinQEntrynot-accessiblecurrentFlexible QinQ configuration Entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.1ColumnhwL2VlanQinQIndexnot-accessiblecurrentIndex number of Flexible QinQ.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.2ColumnhwL2VlanQinQDirectionnot-accessiblecurrentInbound or outbound direction for VPN instance.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.3ColumnhwL2VlanQinQOutSideVlanIdread-createcurrentOutside vlan-id for ISP.
1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.4ColumnhwL2VlanSysQinQRowStatusread-createcurrentThe table contains interface view configuration information for Flexible QinQ.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8TablehwL2VlanInterfaceQinQTablenot-accessiblecurrentInterface view Flexible QinQ configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1RowhwL2VlanInterfaceQinQEntrynot-accessiblecurrentInterface view Flexible QinQ configuration entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.1ColumnhwL2VlanQinQInterfaceIndexnot-accessiblecurrentInterface index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.2ColumnhwL2VlanQinQCVlanIdnot-accessiblecurrentClient vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.3ColumnhwL2VlanQinQSVlanIdread-createcurrentInternet service provide vlan-id
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.4ColumnhwL2VlanQinQActionread-createcurrentAction push or nop.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.5ColumnhwL2VlanQinQNewCVlanIdread-createcurrentReplaced of new client vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.6ColumnhwL2VlanInterfaceQinQRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9TablehwL2DVlanMappingTablenot-accessiblecurrentThe table contains double Vlan-Mapping.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1RowhwL2DVlanMappingEntrynot-accessiblecurrentThe table contains double Vlan-Mapping entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.1ColumnhwL2DVlanMappingInterfaceIndexnot-accessiblecurrentInterface Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.2ColumnhwL2DVlanMappingExternalVlanIdnot-accessiblecurrentService vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.3ColumnhwL2DVlanMappingInternalVlanIdnot-accessiblecurrentClient vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.4ColumnhwL2DVlanMappingDirectionnot-accessiblecurrentDirection inbound and outbound.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.5ColumnhwL2DVlanMappingMapExternalVlanIdread-createcurrentReplaced of new service vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.6ColumnhwL2DVlanMappingMapInternalVlanIdread-createcurrentReplaced of new client vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.7ColumnhwL2DVlanMappingActionread-createcurrentAction drop, pop-externalvlan and swap.
1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.8ColumnhwL2DVlanMappingRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10TablehwL2VlanMappingExtTablenot-accessiblecurrentConfiguration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1RowhwL2VlanMappingExtEntrynot-accessiblecurrentThe table contains Vlan-Mapping entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.1ColumnhwL2VlanMappingExtPortIndexnot-accessiblecurrentPort Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.2ColumnhwL2VlanMappingExtDirectionnot-accessiblecurrentDirection inbound and outbound.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.3ColumnhwL2VlanMappingExtVlanIdnot-accessiblecurrentThe outside vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.4ColumnhwL2VlanMappingExtVlanListLowread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.5ColumnhwL2VlanMappingExtVlanListHighread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.6ColumnhwL2VlanMappingExtRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.7ColumnhwL2VlanMappingExtPriorityModeread-createcurrentThe priority mode of outside VLAN after mapping, the priority can be appointed or inherit from inner VLAN's priority.
1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.8ColumnhwL2VlanMappingExtVlan8021pread-createcurrentThe priority of outside VLAN after mapping, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11TablehwL2VlanStackingAdvTablenot-accessiblecurrentThe table of advanced vlan stacking.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1RowhwL2VlanStackingAdvEntrynot-accessiblecurrentThe entry of advanced vlan stacking table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.1ColumnhwL2VlanStackingAdvPortIndexnot-accessiblecurrentThe Index of L2-Switch Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.2ColumnhwL2VlanStackingAdvOutside8021pnot-accessiblecurrentThe 8021p value of vlan before stacked operation.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.3ColumnhwL2VlanStackingAdvStackVlanIdnot-accessiblecurrentThe outer vlan-id after stacked operation.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.4ColumnhwL2VlanStackingAdvStack8021pnot-accessiblecurrentThe 8021p of outer vlan-id after stacked, it's an optional field, if it is not selected, its value is 8.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.5ColumnhwL2VlanStackingAdvMapVlanIdnot-accessiblecurrentThe possible value of the inner vlan after mapped operation.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.6ColumnhwL2VlanStackingAdvOutsideVlanListLowread-createcurrentThe possible value of the CE-Vlan low list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.7ColumnhwL2VlanStackingAdvOutsideVlanListHighread-createcurrentThe possible value of the CE-Vlan high list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.8ColumnhwL2VlanStackingAdvRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12TablehwL2VlanMappingAdvTablenot-accessiblecurrentThe table of advanced vlan mapping.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1RowhwL2VlanMappingAdvEntrynot-accessiblecurrentThe entry of advanced vlan mapping table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.1ColumnhwL2VlanMappingAdvPortIndexnot-accessiblecurrentThe index of L2-Switch port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.2ColumnhwL2VlanMappingAdvOutsideVlan8021pnot-accessiblecurrentThe possible value of the CE-Vlan's 802.1p.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.3ColumnhwL2VlanMappingAdvMapVlanIdnot-accessiblecurrentThe mapped vlan-id, using it as the index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.4ColumnhwL2VlanMappingAdvMapVlan8021pnot-accessiblecurrentThe 8021p of outer vlan-id after mapped, it's an optional field, if it is not selected, its value is 8.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.5ColumnhwL2VlanMappingAdvOutsideVlanListLowread-createcurrentThe possible value of the CE-Vlan low list
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.6ColumnhwL2VlanMappingAdvOutsideVlanListHighread-createcurrentThe possible value of the CE-Vlan high list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.7ColumnhwL2VlanMappingAdvRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13TablehwL2VlanSwitchTablenot-accessiblecurrentThe table to config the vlan switch.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1RowhwL2VlanSwitchEntrynot-accessiblecurrentThe entry of the vlan switch table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.1ColumnhwL2VlanSwitchIfIndexnot-accessiblecurrentThe interface index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.2ColumnhwL2VlanSwitchOuterVlanIdnot-accessiblecurrentThe ID of the outer vlan tag(customer's tag).
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.3ColumnhwL2VlanSwitchInnerVlanIdnot-accessiblecurrentThe ID of the inner vlan tag.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.4ColumnhwL2VlanSwitchModeread-createcurrentThe Mode of switch vlan operation, including the following case: 0 to 1, 0 to 2, 1 to 0, 1 to 1, 1 to 2, 2 to 0, 2 to 1, 2 to 2.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.5ColumnhwL2VlanSwitchOuterSwitchVlanIdread-createcurrentThe outer vlan-id after switched.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.6ColumnhwL2VlanSwitchInnerSwitchVlanIdread-createcurrentThe inner vlan-id after switched. 0 indicates it's not used.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.7ColumnhwL2VlanSwitch8021pRemarkread-createcurrentThe 8021p of outer vlan-id after switched, it's an optional field, if it is not selected, its value is 8.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.8ColumnhwL2VlanSwitchOutIfIndexread-createcurrentThe out interface index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.9ColumnhwL2VlanSwitchMturead-createcurrentThe value of mtu.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.10ColumnhwL2VlanSwitchMtuDiscardPktsread-onlycurrentThe number of discard packets.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.11ColumnhwL2VlanSwitchMtuDiscardBytesread-onlycurrentThe number of discard bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.12ColumnhwL2VlanSwitchMtuResetFlagread-writecurrentThe flag of reset the discard statistics.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.13ColumnhwL2VlanSwitchMtuEnableFlagread-writecurrentThe flag of enable the discard statistics.
1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.14ColumnhwL2VlanSwitchRowStatusread-createcurrentUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application a…
1.3.6.1.4.1.2011.5.25.42.3.1.2.14TablehwL2VlanQinqVlanTransEnaTablenot-accessiblecurrentThe table of QinQ VLAN translation enable.
1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1RowhwL2VlanQinqVlanTransEnaEntrynot-accessiblecurrentThe entry of QinQ VLAN translation enable.
1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.1ColumnhwL2VlanQinqVlanTransEnaPortIndexnot-accessiblecurrentThe index of L2-Switch port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.2ColumnhwL2VlanQinqVlanTransEnaread-createcurrentEnable QinQ VLAN translation.
1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.3ColumnhwL2VlanQinqVlanTransEnaRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.15TablehwL2VlanQinqVlanTransMissDropTablenot-accessiblecurrentThe table of QinQ VLAN translation miss drop.
1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1RowhwL2VlanQinqVlanTransMissDropEntrynot-accessiblecurrentThe entry of QinQ VLAN translation miss drop.
1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.1ColumnhwL2VlanQinqVlanTransMissDropPortIndexnot-accessiblecurrentThe index of L2-Switch port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.2ColumnhwL2VlanQinqVlanTransMissDropread-createcurrentPackets are dropped when a VLAN translation miss occurs.
1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.3ColumnhwL2VlanQinqVlanTransMissDropRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16TablehwL2VlanViewMappingTablenot-accessiblecurrentThe table of vlan-mapping at the VLAN view.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1RowhwL2VlanViewMappingEntrynot-accessiblecurrentThe table contains vlan-mapping at the VLAN view entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.1ColumnhwL2VlanViewMappingVlanIdnot-accessiblecurrentThe VLAN ID before mapping, using it as the index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.2ColumnhwL2VlanViewMappingDirectionnot-accessiblecurrentDirection inbound and outbound.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.3ColumnhwL2VlanViewMappingMapVlanIdread-createcurrentThe VLAN ID after mapping.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.4ColumnhwL2VlanViewMappingPriorityModeread-createcurrentThe priority mode: the priority can be remarked or inherit: 1: priority inherit 2: remark 8021p
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.5ColumnhwL2VlanViewMappingVlan8021pread-createcurrentThe priority after mapping, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.6ColumnhwL2VlanViewMappingRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17TablehwL2VlanStackingMaskTablenot-accessiblecurrentThe table of VLAN-stacking with Mask.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1RowhwL2VlanStackingMaskEntrynot-accessiblecurrentThe entry of the table of VLAN-stacking with Mask.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.1ColumnhwL2VlanStackingMaskPortIndexnot-accessiblecurrentThe index of L2-Switch interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.2ColumnhwL2VlanStackingMaskStackVlanIdnot-accessiblecurrentThe outer VLAN-ID after stacking operation.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.3ColumnhwL2VlanStackingMaskStack8021pnot-accessiblecurrentThe 8021p of outer VLAN-ID after stacking, it's an optional field, if it is not selected, its value is 8, means inherit the 8021p from inner tag.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.4ColumnhwL2VlanStackingMaskActionnot-accessiblecurrentThe packet will be poped or pushed.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.5ColumnhwL2VlanStackingMaskDirectionnot-accessiblecurrentThe direction which the packet need be poped or pushed, that is ,the packet is receviced or transitted
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.6ColumnhwL2VlanStackingMaskVlanListLowread-createcurrentThe possible value of the CE-VLAN low list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.7ColumnhwL2VlanStackingMaskVlanListHighread-createcurrentThe possible value of the CE-VLAN high list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.8ColumnhwL2VlanStackingMaskRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18TablehwL2VlanIpSubnetVlanTablenot-accessiblecurrentThe table of VLAN assignment based on ip subnet.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1RowhwL2VlanIpSubnetVlanEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on ip subnet.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1ColumnhwL2VlanIpSubnetVlanVlanIdnot-accessiblecurrentThe VLAN-ID after VLAN assignment based on ip subnet.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2ColumnhwL2VlanIpSubnetVlanIpSubnetIndexnot-accessiblecurrentThe index of ip subnet on this vlan, ranging from integer 1 to 12.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3ColumnhwL2VlanIpSubnetVlanIpAddressread-createcurrentThe IpAddress based on vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4ColumnhwL2VlanIpSubnetVlanIpSubnetMaskread-createcurrentThe IpAddress or Ip subnet mask.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5ColumnhwL2VlanIpSubnetVlanPriorityread-createcurrentThe priority after vlan assignment based on ip subnet, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6ColumnhwL2VlanIpSubnetVlanRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19TablehwL2VlanMacVlanTablenot-accessiblecurrentThe table of VLAN assignment based on MAC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1RowhwL2VlanMacVlanEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on MAC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.1ColumnhwL2VlanMacVlanVlanIdread-createcurrentmac-vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.2ColumnhwL2VlanMacVlanMacread-createcurrentThe VLAN-ID after VLAN assignment based on mac.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.3ColumnhwL2VlanMacVlanVlanPriorityread-createcurrentThe priority after vlan assignment based on mac, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.4ColumnhwL2VlanMacVlanMacRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20TablehwL2VlanProtocolVlanTablenot-accessiblecurrentThe table of VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1RowhwL2VlanProtocolVlanEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.1ColumnhwL2VlanProtocolVlanVlanIdnot-accessiblecurrentThe VLAN-ID after VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.2ColumnhwL2VlanProtocolVlanProtocolIndexnot-accessiblecurrentThe index of protocol on vlan, ranging from integer 1 to 16
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.3ColumnhwL2VlanProtocolVlanProtocolTyperead-createcurrentProtocol type.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.4ColumnhwL2VlanProtocolVlanEncapTyperead-createcurrentEncap type, include ETHERII,SNAP,LLC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.5ColumnhwL2VlanProtocolVlanRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21TablehwL2VlanPolicyVlanTablenot-accessiblecurrentThe table of VLAN assignment based on strategy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1RowhwL2VlanPolicyVlanEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on strategy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.1ColumnhwL2VlanPolicyVlanMacread-createcurrentSupport MAC+IP and MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.2ColumnhwL2VlanPolicyVlanIpread-createcurrentSupport MAC+IP and MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.3ColumnhwL2VlanPolicyVlanPortread-createcurrentSupport MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.4ColumnhwL2VlanPolicyVlanVlanIdread-createcurrentThe VLAN-ID after VLAN assignment based on policy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.5ColumnhwL2VlanPolicyVlanVlanPriorityread-createcurrentThe VLAN-ID after VLAN assignment based on policy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.6ColumnhwL2VlanPolicyVlanRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.22ScalarhwL2VlanVoiceVlanEnabledVlanIdread-writecurrentIndicates the global voice VLAN ID. Global voice VLAN is enabled if the value ranges from 1 to 4094; global voice VLAN is disabled if the value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.23ScalarhwL2VlanVoiceVlanAgingTimeread-writecurrentVoice vlan aging time(in minute). The default value is 1440.
1.3.6.1.4.1.2011.5.25.42.3.1.2.24ScalarhwL2VlanVoiceVlanSecurityModeread-writecurrentVoice vlan security mode status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25TablehwL2VlanVoiceVlanPortTablenot-accessiblecurrentA list of voice vlan mode entries.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1RowhwL2VlanVoiceVlanPortEntrynot-accessiblecurrentAn entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1ColumnhwL2VlanVoiceVlanPortIndexnot-accessiblecurrentThe port index on which voice vlan is enabled.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2ColumnhwL2VlanVoiceVlanPortEnableread-writecurrentVoice VLAN enable status at port .
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3ColumnhwL2VlanVoiceVlanPortModeread-writecurrentVoice VLAN configuration mode status, 1 for auto, 2 for manual.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4ColumnhwL2VlanVoiceVlanPortLegacyread-writecurrentThis flag is enabled. It indicates that the interworking with other vendors' equipment is enabled.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5ColumnhwL2VlanVoiceVlanPortSecurityModeread-writecurrentVoice VLAN configuration security mode status, 1 for security, 2 for normal.
1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6ColumnhwL2VlanVoiceVlanPortModifyPriorityModeread-writecurrentThe value of this object identifies the priority of voice packets to be forwarded , 1 for modifyPriByVlan, 2 for modifyPriByOui.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26TablehwL2VlanVoiceVlanOuiTablenot-accessiblecurrentA table containing the MAC address which can be identified by voice vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1RowhwL2VlanVoiceVlanOuiEntrynot-accessiblecurrentAn entry containing the information of MAC address which can be identified by voice vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1ColumnhwL2VlanVoiceVlanOuiAddressnot-accessiblecurrentMAC address can be identified by Voice VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2ColumnhwL2VlanVoiceVlanOuiMasknot-accessiblecurrentThe mask of MAC address.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3ColumnhwL2VlanVoiceVlanOuiDescriptionread-createcurrentThe description of OUI.
1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4ColumnhwL2VlanVoiceVlanOuiRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27TablehwL2VlanMappingMultiTablenot-accessiblecurrentConfiguration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1RowhwL2VlanMappingMultiEntrynot-accessiblecurrentThe table contains Vlan-Mapping entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.1ColumnhwL2VlanMappingMultiPortIndexnot-accessiblecurrentPort Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.2ColumnhwL2VlanMappingMultiDirectionnot-accessiblecurrentDirection inbound and outbound.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.3ColumnhwL2VlanMappingMultiVlanIdnot-accessiblecurrentThe outside vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.4ColumnhwL2VlanMappingMultiVlan8021pnot-accessiblecurrentThe priority of outside VLAN after mapping,8 means priority-inherit.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.5ColumnhwL2VlanMappingMultiVlanListLowread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.6ColumnhwL2VlanMappingMultiVlanListHighread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.7ColumnhwL2VlanMappingMultiRowStatusread-createcurrentThis table can be created.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28TablehwL2VlanMacVlanNewTablenot-accessiblecurrentThe table of VLAN assignment based on MAC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1RowhwL2VlanMacVlanNewEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on MAC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1ColumnhwL2VlanMacVlanNewMacnot-accessiblecurrentThe VLAN-ID after VLAN assignment based on MAC.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2ColumnhwL2VlanMacVlanNewVlanIdread-createcurrentMAC-VLAN VLAN ID.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3ColumnhwL2VlanMacVlanNewVlanPriorityread-createcurrentThe priority after VLAN assignment based on MAC, its default value is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4ColumnhwL2VlanMacVlanNewMacRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.29TablehwL2VlanProtocolVlanNewTablenot-accessiblecurrentThe table of VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1RowhwL2VlanProtocolVlanNewEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1ColumnhwL2VlanProtocolVlanNewVlanIdnot-accessiblecurrentThe VLAN-ID after VLAN assignment based on protocol.
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2ColumnhwL2VlanProtocolVlanNewProtocolIndexnot-accessiblecurrentThe index of protocol on vlan, ranging from integer 1 to 16
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3ColumnhwL2VlanProtocolVlanNewProtocolTyperead-createcurrentProtocol type.
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4ColumnhwL2VlanProtocolVlanNewProtocolTypeValueread-createcurrentThe value of the configured protocol type. The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follow…
1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5ColumnhwL2VlanProtocolVlanNewRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30TablehwL2VlanPolicyVlanNewTablenot-accessiblecurrentThe table of VLAN assignment based on strategy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1RowhwL2VlanPolicyVlanNewEntrynot-accessiblecurrentThe entry of the table of VLAN assignment based on strategy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1ColumnhwL2VlanPolicyVlanNewMacnot-accessiblecurrentSupport MAC+IP and MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2ColumnhwL2VlanPolicyVlanNewIpnot-accessiblecurrentSupport MAC+IP and MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3ColumnhwL2VlanPolicyVlanNewPortnot-accessiblecurrentSupport MAC+IP+PORT.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4ColumnhwL2VlanPolicyVlanNewVlanIdnot-accessiblecurrentThe VLAN-ID after VLAN assignment based on policy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5ColumnhwL2VlanPolicyVlanNewVlanPriorityread-createcurrentThe Priority after VLAN assignment based on policy.
1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6ColumnhwL2VlanPolicyVlanNewRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31TablehwL2VlanProtocolVlanPortNewTablenot-accessiblecurrentProtocol-based VLAN port information table. hwL2VlanProtocolVlanPortNewVlanId refers to hwL2VlanProtocolVlanNewVlanId in hwL2VlanProtocolVlanNewTable. hwL2Vlan…
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1RowhwL2VlanProtocolVlanPortNewEntrynot-accessiblecurrentProtocol-based VLAN port information entry.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1ColumnhwL2VlanProtocolVlanPortNewIndexnot-accessiblecurrentThe maximum number is the total number of the ports supported by device.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2ColumnhwL2VlanProtocolVlanPortNewVlanIdnot-accessiblecurrentThe protocol-based VLAN ID.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3ColumnhwL2VlanProtocolVlanPortNewProtocolIndexnot-accessiblecurrentThe protocol index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4ColumnhwL2VlanProtocolVlanPortNewPriorityread-createcurrentThe protocol-based VLAN priority.
1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5ColumnhwL2VlanProtocolVlanPortNewRowStatusread-createcurrentThe row status of this table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32TablehwL2VlanMultiVoiceVlanPortTablenot-accessiblecurrentVoice VLAN is enabled on the port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1RowhwL2VlanMultiVoiceVlanPortEntrynot-accessiblecurrentAn entry containing voice VLAN mode information, which is applicable to a voice VLAN enabled interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1ColumnhwL2VlanMultiVoiceVlanIfIndexnot-accessiblecurrentThe interface index on which voice VLAN is enabled.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2ColumnhwL2VlanMultiVoiceVlanPortVLanIdread-createcurrentThe VLAN ID of voice VLAN on port .
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3ColumnhwL2VlanMultiVoiceVlanPortUntagEnableread-writecurrentThe value of this object identifies whether untagged voice packets can be forwarded in voice VLAN, 1 for enabled, 2 for disabled.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.4ColumnhwL2VlanMultiVoiceVlanPortTag0Enableread-writecurrentThe value of this object identifies whether tag0 voice packets can be forwarded in voice VLAN, 1 for enabled, 2 for disabled.
1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51ColumnhwL2VlanMultiVoiceVlanPortRowStatusread-createcurrentThe row status of this table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33TablehwL2VlanSwitchExtTablenot-accessiblecurrentThe table to config the vlan switch.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1RowhwL2VlanSwitchExtEntrynot-accessiblecurrentThe entry of the vlan switch table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1ColumnhwL2VlanSwitchExtNamenot-accessiblecurrentThe vlan switch name.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2ColumnhwL2VlanSwitchExtSrcIfIndexread-createcurrentThe index of source interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3ColumnhwL2VlanSwitchExtOuterVlanIdread-createcurrentThe outer vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4ColumnhwL2VlanSwitchExtVlanListLowread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5ColumnhwL2VlanSwitchExtVlanListHighread-createcurrentThe possible value of the inside vlan list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6ColumnhwL2VlanSwitchExtDstIfIndexread-createcurrentThe index of destination interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7ColumnhwL2VlanSwitchExtVlanXlateActionread-createcurrentThe action type of vlan: 1 : unchange vlan, 2 : switch vlan, 3 : push vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8ColumnhwL2VlanSwitchExtDstVlanread-createcurrentThe outer vlan of destination.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.9ColumnhwL2VlanSwitchExtDstInnerVlanread-createcurrentThe inner vlan of destination.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.10ColumnhwL2VlanSwitchExtRemarkread-createcurrentThe remark 8021p value.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.11ColumnhwL2VlanSwitchExtRemarkReverseread-createcurrentThe reverse remark 8021p value.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12ColumnhwL2VlanSwitchExtLinkStatusread-onlycurrentThe link status of vlan switch.
1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51ColumnhwL2VlanSwitchExtRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.34ScalarhwL2VlanPrecedenceread-writecurrentDetermine whether to select the MAC-based VLAN or subnet-based VLAN, 1:MAC VLAN(default); 2:IPSUBNET VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35TablehwL2VlanXlateTablenot-accessiblecurrentVLAN mapping configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1RowhwL2VlanXlateEntrynot-accessiblecurrentThe entry in the VLAN mapping configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1ColumnhwL2VlanXlateInterfaceIndexnot-accessiblecurrentThe index of the interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2ColumnhwL2VlanXlateVlanIdBeginnot-accessiblecurrentThe ID of the first VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3ColumnhwL2VlanXlateVlanIdEndread-createcurrentThe ID of the end VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4ColumnhwL2VlanXlateOuterVlanIdnot-accessiblecurrentThe value of outer VLAN for packets with double tags in customer side. For one-tag-packet, it's 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5ColumnhwL2VlanXlateVlan8021pnot-accessiblecurrentThis object indicates the 802.1p priority in the VLAN tag to be mapped to.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6ColumnhwL2VlanXlateDirectionnot-accessiblecurrentDirection inbound or outbound or both.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7ColumnhwL2VlanXlateActionread-createcurrentThe packet will be mapped or stacked or poped.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8ColumnhwL2VlanXlateToVlanIdread-createcurrentThe ID of the outer VLAN at the network side. If this VLAN is not in use, the ID is 0.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9ColumnhwL2VlanXlateToinnerVlanIdread-createcurrentThe value of inner VLAN in network side. It's 0 when it is not used.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10ColumnhwL2VlanXlateremarkread-createcurrentThe priority of outer VLAN in network side.
1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.51ColumnhwL2VlanXlateRowStatusread-createcurrentOperation status.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36TablehwL2QinQVlanTablenot-accessiblecurrentThe table of QinQ-VLAN configuration.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1RowhwL2QinQVlanEntrynot-accessiblecurrentThe entry of QinQ-VLAN table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1ColumnhwL2QinQVlanIfIndexnot-accessiblecurrentThe index number of QinQ-VLAN port.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2ColumnhwL2QinQVlanIdBeginnot-accessiblecurrentThe begin VLAN ID of outside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3ColumnhwL2QinQVlanIdEndnot-accessiblecurrentThe end VLAN ID of outside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4ColumnhwL2QinQVlanInnerVlanIdBeginnot-accessiblecurrentThe begin VLAN ID of inside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5ColumnhwL2QinQVlanInnerVlanIdEndnot-accessiblecurrentThe end VLAN ID of inside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6ColumnhwL2QinQVlan8021pBeginnot-accessiblecurrentThe begin number of 8021p.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7ColumnhwL2QinQVlan8021pEndnot-accessiblecurrentThe end number of 8021p.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8ColumnhwL2QinQVlanEtherTypenot-accessiblecurrentThe value of Ethernet Type.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9ColumnhwL2QinQVlanModeread-createcurrentThe mode of QinQ-VLAN configuration.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10ColumnhwL2QinQVlanChangedVlanIdread-createcurrentThe changed VLAN ID of outside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11ColumnhwL2QinQVlanChangedInnerVlanIdread-createcurrentThe changed VLAN ID of inside.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12ColumnhwL2QinQVlanRemarkread-createcurrentThe remark number of outside 8021p.If the value is 8, the priority in the outer tag is not changed.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13ColumnhwL2QinQVlanMapStackVlanIdread-createcurrentThe map VLAN ID for inside after stacking action.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14ColumnhwL2QinQVlanRowStatusread-createcurrentThis table can read, create and delete.
1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15ColumnhwL2QinQVlanInnerRemarkread-createcurrentThe remark number of the changed VLAN for inside. If the value is 8, the priority in tag is not changed.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37TablehwL2UntagAddDTagTablenot-accessiblecurrentThe table of untagged VLAN add double tagged VLAN configuration.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1RowhwL2UntagAddDTagEntrynot-accessiblecurrentThe entry of untagged VLAN add double tagged VLAN table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1ColumnhwL2UntagAddDTagPortIndexnot-accessiblecurrentThe port index number of interface.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2ColumnhwL2UntagAddDTagOuterVlanIdread-createcurrentThe outer VLAN ID.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3ColumnhwL2UntagAddDTagInnerVlanIdread-createcurrentThe inner VLAN ID.
1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4ColumnhwL2UntagAddDTagRowStatusread-createcurrentThis table can read, create and delete.
1.3.6.1.4.1.2011.5.25.42.3.1.2.38ScalarhwL2VlanVoiceVlan8021pread-writecurrentIt indicates the IEEE 802.1Q priority of the voice VLAN and the default value is 6.
1.3.6.1.4.1.2011.5.25.42.3.1.2.39ScalarhwL2VlanVoiceVlanDscpread-writecurrentIt indicates the Differentiated Services CodePoint priority of the voice VLAN and the default value is 0x2e.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40TablehwL2QinQIsolateTablenot-accessiblecurrentConfiguration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1RowhwL2QinQIsolateEntrynot-accessiblecurrentQinQ-VLAN isolate port configuration table.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.1ColumnhwL2QinQIsolatePortIndexnot-accessiblecurrentIndex number of QinQ-port isolate port, use it as the Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.2ColumnhwL2QinQIsolateVlanIdnot-accessiblecurrentThe global vlan identifier that is associated with the QinQ-port, use it as the Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.3ColumnhwL2QinQIsolatePeVlanIdnot-accessiblecurrentOutside vlan-id of QinQ-port ,use it as the Index.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.4ColumnhwL2QinQIsolateCeVlanListLowread-writecurrentThe possible value of the CE vlan-id list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.5ColumnhwL2QinQIsolateCeVlanListHighread-writecurrentThe possible value of the CE vlan-id list.
1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.6ColumnhwL2QinQTagTyperead-onlycurrentThe mode of QinQ-VLAN configuration.
1.3.6.1.4.1.2011.5.25.42.3.1.3NodehwL2VlanStatistics
1.3.6.1.4.1.2011.5.25.42.3.1.3.1TablehwL2IfStatVlanCfgTablenot-accessiblecurrentThe table contains statistics enable configuration for the port and vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1RowhwL2IfStatVlanCfgEntrynot-accessiblecurrentEntries of vlan and port statistics enable table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.1ColumnhwL2IfStatVlanCfgPortIndexnot-accessiblecurrentThe virtual index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.2ColumnhwL2IfStatVlanCfgVlanIdnot-accessiblecurrentThe vlan-id of packets'tag that's received or sent out from the port.
1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.11ColumnhwL2IfStatVlanCfgEnableFlagread-createcurrentThe flag of enable the statistic function based on vlan in the interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.12ColumnhwL2IfStatVlanCfgRowStatusread-createcurrentUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application a…
1.3.6.1.4.1.2011.5.25.42.3.1.3.2TablehwL2IfStat8021pCfgTablenot-accessiblecurrentThe table contains statistics enable for the port and 8021p.
1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1RowhwL2IfStat8021pCfgEntrynot-accessiblecurrentEntries of port and 8021p statistics enable table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.1ColumnhwL2IfStat8021pCfgPortIndexnot-accessiblecurrentThe virtual index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.2ColumnhwL2IfStat8021pCfg8021pnot-accessiblecurrentThe 8021p of packet's tag that's received or sent from the port.
1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.11ColumnhwL2IfStat8021pCfgEnableFlagread-createcurrentThe flag of enable the static function based on 8021p in the interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.12ColumnhwL2IfStat8021pCfgRowStatusread-createcurrentUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application a…
1.3.6.1.4.1.2011.5.25.42.3.1.3.3TablehwL2IfStat8021pAndVlanCfgTablenot-accessiblecurrentThe table contains statistics enable for the port, vlan and 8021p.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1RowhwL2IfStat8021pAndVlanCfgEntrynot-accessiblecurrentEntries of port, 8021p and vlan statistics enable table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.1ColumnhwL2IfStat8021pAndVlanCfgPortIndexnot-accessiblecurrentThe virtual index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.2ColumnhwL2IfStat8021pAndVlanCfgVlanIdnot-accessiblecurrentThe vlan-id of packet's tag that's received or sent out from the port.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.3ColumnhwL2IfStat8021pAndVlanCfg8021pnot-accessiblecurrentThe 8021p value of packet's tag that's received or sent from the port.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.11ColumnhwL2IfStat8021pAndVlanCfgEnableFlagread-createcurrentThe Flag of enable the static function based on vlan-id and 8021p in the interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.12ColumnhwL2IfStat8021pAndVlanCfgRowStatusread-createcurrentUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application a…
1.3.6.1.4.1.2011.5.25.42.3.1.3.4TablehwL2VlanStatTablenot-accessiblecurrentThe table lists the statistics about packets in a VLAN, including the number of packets and bytes sent and received by the VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1RowhwL2VlanStatEntrynot-accessiblecurrentEntries of vlan statistics table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.1ColumnhwL2VlanStatVlanIdnot-accessiblecurrentThe vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.2ColumnhwL2VlanStatInTotalPktsread-onlycurrentThe number of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.3ColumnhwL2VlanStatInTotalBytesread-onlycurrentThe byte number of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.4ColumnhwL2VlanStatOutTotalPktsread-onlycurrentThe number of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.5ColumnhwL2VlanStatOutTotalBytesread-onlycurrentThe byte number of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.6ColumnhwL2VlanStatUnknownUcastDiscardPktsread-onlycurrentThe number of aborted unknown unicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.7ColumnhwL2VlanStatUnknownMcastDiscardPktsread-onlycurrentThe number of aborted unknown multicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.8ColumnhwL2VlanStatBcastDiscardPktsread-onlycurrentThe number of aborted broadcast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.9ColumnhwL2VlanStatInUcastPktsread-onlycurrentThe number of received unicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.10ColumnhwL2VlanStatInUcastBytesread-onlycurrentThe number of received unicast packets' bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.11ColumnhwL2VlanStatOutUcastPktsread-onlycurrentThe number of sent unicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.12ColumnhwL2VlanStatOutUcastBytesread-onlycurrentThe number of sent unicast packets' bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.13ColumnhwL2VlanStatInMcastPktsread-onlycurrentThe number of received multicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.14ColumnhwL2VlanStatInMcastBytesread-onlycurrentThe number of received multicast packets' bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.15ColumnhwL2VlanStatOutMcastPktsread-onlycurrentThe number of sent multicast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.16ColumnhwL2VlanStatOutMcastBytesread-onlycurrentThe number of sent multicast packets' bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.17ColumnhwL2VlanStatInBcastPktsread-onlycurrentThe number of received broadcast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.18ColumnhwL2VlanStatInBcastBytesread-onlycurrentThe number of received broadcast packets' bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.19ColumnhwL2VlanStatOutBcastPktsread-onlycurrentThe number of sent broadcast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.20ColumnhwL2VlanStatOutBcastBytesread-onlycurrentThe number of sent broadcast packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.21ColumnhwL2VlanStatResetFlagread-writecurrentThe flag of reset.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5TablehwL2IfStatVlanTablenot-accessiblecurrentThe table contains statistics information for the port and vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1RowhwL2IfStatVlanEntrynot-accessiblecurrentEntries of vlan and port statistics table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.1ColumnhwL2IfStatVlanPortIndexnot-accessiblecurrentThe virtual Index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.2ColumnhwL2IfStatVlanIdnot-accessiblecurrentThe vlan-id of packets'tag that's received or sent out from the port.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.3ColumnhwL2IfStatVlanInTotalPktsread-onlycurrentThe number of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.4ColumnhwL2IfStatVlanInTotalBytesread-onlycurrentThe bytes of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.5ColumnhwL2IfStatVlanOutTotalPktsread-onlycurrentThe number of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.6ColumnhwL2IfStatVlanOutTotalBytesread-onlycurrentThe bytes of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.7ColumnhwL2IfStatVlanInPktsRateread-onlycurrentThe rate of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.8ColumnhwL2IfStatVlanInBytesRateread-onlycurrentThe rate of received bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.9ColumnhwL2IfStatVlanOutPktsRateread-onlycurrentThe rate of sent packet.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.10ColumnhwL2IfStatVlanOutBytesRateread-onlycurrentThe rate of sent bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.11ColumnhwL2IfStatVlanInUcastPktsread-onlycurrentThe number of unicast packets received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.12ColumnhwL2IfStatVlanInUcastBytesread-onlycurrentThe number of unicast bytes received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.13ColumnhwL2IfStatVlanOutUcastPktsread-onlycurrentThe packet number of unicast packets sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.14ColumnhwL2IfStatVlanOutUcastBytesread-onlycurrentThe number of unicast bytes sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.15ColumnhwL2IfStatVlanInMcastPktsread-onlycurrentThe number of multicast packets received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.16ColumnhwL2IfStatVlanInMcastBytesread-onlycurrentThe number of multicast bytes received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.17ColumnhwL2IfStatVlanOutMcastPktsread-onlycurrentThe number of multicast packets sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.18ColumnhwL2IfStatVlanOutMcastBytesread-onlycurrentThe number of multicast bytes sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.19ColumnhwL2IfStatVlanInBcastPktsread-onlycurrentThe number of broadcast packets received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.20ColumnhwL2IfStatVlanInBcastBytesread-onlycurrentThe number of broadcast bytes received.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.21ColumnhwL2IfStatVlanOutBcastPktsread-onlycurrentThe number of broadcast packets sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.22ColumnhwL2IfStatVlanOutBcastBytesread-onlycurrentThe number of broadcast bytes sent.
1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.23ColumnhwL2IfStatVlanResetFlagread-writecurrentThe flag of reset the statistic counter.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6TablehwL2IfStat8021pTablenot-accessiblecurrentThe table contains statistics information for the port and 8021p.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1RowhwL2IfStat8021pEntrynot-accessiblecurrentEntries of port and 8021p statistics table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.1ColumnhwL2IfStat8021pPortIndexnot-accessiblecurrentThe virtual index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.2ColumnhwL2IfStat8021pnot-accessiblecurrentThe priority of the packet's tag.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.3ColumnhwL2IfStat8021pInTotalPktsread-onlycurrentThe number of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.4ColumnhwL2IfStat8021pInTotalBytesread-onlycurrentThe bytes of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.5ColumnhwL2IfStat8021pOutTotalPktsread-onlycurrentThe number of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.6ColumnhwL2IfStat8021pOutTotalBytesread-onlycurrentThe bytes of sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.7ColumnhwL2IfStat8021pInPktsRateread-onlycurrentThe rate of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.8ColumnhwL2IfStat8021pInBytsRateread-onlycurrentThe rate of received bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.9ColumnhwL2IfStat8021pOutPktsRateread-onlycurrentThe rate of the sent packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.10ColumnhwL2IfStat8021pOutBytesRateread-onlycurrentThe rate of sent bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.11ColumnhwL2IfStat8021pResetFlagread-writecurrentThe flag of reset the statistic counter.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7TablehwL2IfStat8021pAndVlanTablenot-accessiblecurrentThe table contains statistics information for the port ,8021p and vlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1RowhwL2IfStat8021pAndVlanEntrynot-accessiblecurrentEntries of port statistics table based on 8021p and vlan-id fields.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.1ColumnhwL2IfStat8021pAndVlanPortIndexnot-accessiblecurrentThe virtual Index of L2 Interface.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.2ColumnhwL2IfStat8021pAndVlanVlanIdnot-accessiblecurrentVlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.3ColumnhwL2IfStat8021pAndVlan8021pnot-accessiblecurrentThe priority in the 8021p packets'tag.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.4ColumnhwL2IfStat8021pAndVlanInTotalPktsread-onlycurrentThe number of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.5ColumnhwL2IfStat8021pAndVlanInTotalBytesread-onlycurrentThe bytes of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.6ColumnhwL2IfStat8021pAndVlanInPktsRateread-onlycurrentThe rate of received packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.7ColumnhwL2IfStat8021pAndVlanInBytsRateread-onlycurrentThe rate of received bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.8ColumnhwL2IfStat8021pAndVlanResetFlagread-writecurrentThe flag of reset statistic counters.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8TablehwL2VlanSwitchPSTablenot-accessiblecurrentThe table to config the vlan switch by Port+SVlan index.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1RowhwL2VlanSwitchPSEntrynot-accessiblecurrentThe entry of the vlan switch IfIndex+SVlan table.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.1ColumnhwL2VlanSwitchPSIfIndexnot-accessiblecurrentThe interface index.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.2ColumnhwL2VlanSwitchPSSVlanIdnot-accessiblecurrentVlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.3ColumnhwL2VlanSwitchPSCVlanIdnot-accessiblecurrentCVlan-id.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.4ColumnhwL2VlanSwitchPSInputPktsread-onlycurrentThe number of inbound discard packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.5ColumnhwL2VlanSwitchPSInputBytesread-onlycurrentThe number of inbound discard bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.6ColumnhwL2VlanSwitchPSOutputPktsread-onlycurrentThe number of outbound discard packets.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.7ColumnhwL2VlanSwitchPSOutputBytesread-onlycurrentThe number of outbound discard bytes.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.8ColumnhwL2VlanSwitchPSResetFlagread-writecurrentThe flag of reset statistics.
1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.9ColumnhwL2VlanSwitchPSEnableFlagread-writecurrentThe flag of enable statistics.
1.3.6.1.4.1.2011.5.25.42.3.1.4NodehwL2VlanTraps
1.3.6.1.4.1.2011.5.25.42.3.1.4.1NotificationhwL2VlanUnkownPacketAlarmcurrentWarning of unkown Packets in vlan.
1.3.6.1.4.1.2011.5.25.42.3.1.4.2NotificationhwVcmpServerMacConflictcurrentMore than one server exists in the VCMP domain.
1.3.6.1.4.1.2011.5.25.42.3.1.4.3NotificationhwVcmpRevisionConflictcurrentA server received a VCMP packet with a higher revision number.
1.3.6.1.4.1.2011.5.25.42.3.1.4.4NotificationhwMuxVlanGroupCountExceedThresholdcurrentThe number of the group VLANs in the principal VLAN exceeded the upper threshold.
1.3.6.1.4.1.2011.5.25.42.3.1.4.5NotificationhwMuxVlanGroupCountExceedThresholdResumecurrentThe number of the group VLANs in the principal VLAN fell below the lower threshold.
1.3.6.1.4.1.2011.5.25.42.3.1.4.6NotificationhwVlantransCountExceedThresholdcurrentThe number of VLAN mapping or VLAN stacking configurations on the interface exceeded the upper threshold.
1.3.6.1.4.1.2011.5.25.42.3.1.4.7NotificationhwVlantransCountExceedThresholdResumecurrentThe number of the VLAN mapping and VLAN stacking configurations on the interface fell below the threshold.
1.3.6.1.4.1.2011.5.25.42.3.1.5NodehwL2VlanTrapObjects
1.3.6.1.4.1.2011.5.25.42.3.1.5.1ScalarhwVcmpDeviceMacaccessible-for-notifycurrentMAC address of a device running VCMP
1.3.6.1.4.1.2011.5.25.42.3.1.5.2ScalarhwPrincipalVlanIDaccessible-for-notifycurrentPrincipal VLAN ID of a MUX VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.5.3ScalarhwMuxVlanUpperThresholdaccessible-for-notifycurrentUpper threshold for the number of group VLANs in a principal VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.5.4ScalarhwMuxVlanLowerThresholdaccessible-for-notifycurrentLower threshold for the number of group VLANs in a principal VLAN.
1.3.6.1.4.1.2011.5.25.42.3.1.5.5ScalarhwVlantransIfIndexaccessible-for-notifycurrentIndex of the interface that has vlan mapping or vlan stacking configured.
1.3.6.1.4.1.2011.5.25.42.3.1.5.6ScalarhwVlantransUpperThresholdaccessible-for-notifycurrentUpper threshold for the number of vlan mapping and vlan stacking configurations on the interface.
1.3.6.1.4.1.2011.5.25.42.3.1.5.7ScalarhwVlantransLowerThresholdaccessible-for-notifycurrentLower threshold for the number of vlan mapping and vlan stacking configurations on the interface.
1.3.6.1.4.1.2011.5.25.42.3.2NodehwL2vlanConformance
1.3.6.1.4.1.2011.5.25.42.3.2.1NodehwL2vlanGroups
1.3.6.1.4.1.2011.5.25.42.3.2.1.1GrouphwL2VlanMIBTableGroupcurrentA collection of objects providing device level control and status information for the Virtual LAN bridge services.
1.3.6.1.4.1.2011.5.25.42.3.2.1.2GrouphwL2vlanStackingGroupcurrentA collection of objects providing l2vlan stacking service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.3GrouphwL2vlanMappingGroupcurrentA collection of objects providing l2vlan mapping service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.4GrouphwSupervlanGroupcurrentA collection of objects providing supervlan service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.5GrouphwL2InterfIsolateGroupcurrentA collection of objects provding l2interfisolate service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.6GrouphwL2IsolatemappingGroupcurrentA collection of objects provding enhanced l2isolate service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.7GrouphwL2VlanStackingExtGroupcurrentA collection of objects providing flexible QinQ service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.8GrouphwL2vlanQinQGroupcurrentA collection of objects providing l2vlan QinQ service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.9GrouphwL2vlanQinQInterfaceGroupcurrentA collection of objects providing l2vlan QinQ service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.10GrouphwL2DVlanMappingGroupcurrentA collection of objects providing double Vlan-Mapping service.
1.3.6.1.4.1.2011.5.25.42.3.2.1.11GrouphwL2VlanStackingAdvGroupcurrentA collection of objects vlan Stacking 8021p.
1.3.6.1.4.1.2011.5.25.42.3.2.1.12GrouphwL2VlanMappingAdvGroupcurrentA collection of objects Vlan-Mapping 8021p.
1.3.6.1.4.1.2011.5.25.42.3.2.1.13GrouphwL2VlanSwitchGroupcurrentA collection of hwL2VlanSwitchTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.14GrouphwL2IfStatVlanCfgGroupcurrentA collection of objects enable the vlan statistic funtion in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.15GrouphwL2IfStat8021pCfgGroupcurrentA collection of objects enable the 8021p statistic funtion in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.16GrouphwL2IfStat8021pAndVlanCfgGroupcurrentA collection of objects enable the 8021p and vlan statistic funtion in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.17GrouphwL2VlanStatGroupcurrentA collection of objects vlan statistic in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.18GrouphwL2IfStatVlanGroupcurrentA collection of objects vlan statistic in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.19GrouphwL2IfStat8021pGroupcurrentA collection of objects 8021p statistic in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.20GrouphwL2IfStat8021pAndVlanGroupcurrentA collection of objects vlan and 8021p statistic in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.21GrouphwL2VlanMappingExtGroupcurrentA collection of objects VLAN Mapping in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.22GrouphwL2VlanQinqVlanTransEnaGroupcurrentA collection of objects QinQ VLAN translation enable in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.23GrouphwL2VlanQinqVlanTransMissDropGroupcurrentA collection of objects QinQ VLAN translation miss drop in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.24GrouphwL2VlanViewMappingGroupcurrentA collection of objects VLAN Mapping at the VLAN view.
1.3.6.1.4.1.2011.5.25.42.3.2.1.25GrouphwL2VlanStackingMaskGroupcurrentA collection of hwL2VlanStackingMaskTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.26GrouphwL2VlanIpSubnetVlanGroupcurrentA collection of hwL2VlanIpSubnetVlanTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.27GrouphwL2VlanMacVlanGroupcurrentA collection of hwL2VlanMacVlanTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.28GrouphwL2VlanProtocolVlanGroupcurrentA collection of hwL2VlanProtocolVlanTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.29GrouphwL2VlanPolicyVlanGroupcurrentA collection of hwL2VlanPolicyVlanTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.30GrouphwL2VlanVoiceVlanGroupcurrentA collection of Voice VLAN related objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.31GrouphwL2VlanMappingMultiGroupcurrentA collection of hwL2VlanMappingMultiTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.32GrouphwL2VlanSwitchPSGroupcurrentA collection of vlan statistic in the port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.33GrouphwL2VlanMacVlanNewGroupcurrentA collection of hwL2VlanMacVlanNewTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.34GrouphwL2VlanProtocolVlanNewGroupcurrentA collection of hwL2VlanProtocolVlanNewTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.35GrouphwL2VlanPolicyVlanNewGroupcurrentA collection of hwL2VlanPolicyVlanNewTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.36GrouphwL2VlanProtocolVlanPortNewGroupcurrentA group of protocol vlan port.
1.3.6.1.4.1.2011.5.25.42.3.2.1.37GrouphwL2VlanMultiVoiceVlanPortGroupcurrentA collection of hwL2VlanMultiVoiceVlanPortTable objects.
1.3.6.1.4.1.2011.5.25.42.3.2.1.38GrouphwL2VlanPrecedenceGroupcurrentA collection of hwL2VlanPrecedence object.
1.3.6.1.4.1.2011.5.25.42.3.2.1.39GrouphwL2VlanXlateGroupcurrentA collection of hwL2VlanXlateGroup object.
1.3.6.1.4.1.2011.5.25.42.3.2.1.40GrouphwL2VlanSwitchExtGroupcurrentA group of vlan switch extent table.
1.3.6.1.4.1.2011.5.25.42.3.2.1.41GrouphwL2QinQVlanGroupcurrentA group of QinQ-VLAN table.
1.3.6.1.4.1.2011.5.25.42.3.2.1.42GrouphwL2UntagAddDTagGroupcurrentA group of untagged VLAN add double tagged VLAN table.
1.3.6.1.4.1.2011.5.25.42.3.2.1.43GrouphwVcmpGroupcurrentA collection of VCMP objects.
1.3.6.1.4.1.2011.5.25.42.3.2.2NodehwL2vlanCompliances
1.3.6.1.4.1.2011.5.25.42.3.2.2.1CompliancehwL2vlanCompliancecurrentThe compliance statement for device support of Virtual LAN services.
1.3.6.1.4.1.2011.5.25.42.3.2.3NodehwL2VlanTrapsGroups
1.3.6.1.4.1.2011.5.25.42.3.2.3.1GrouphwL2VlanTrapsGroupcurrentThe Group of L2VLAN Trap.