HUAWEI-LOAD-BACKUP-MIB
219 objects
This mib provides loading, backup and patch-related functions.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-TC-MIB | HWPCBType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.6 | IdentityhwLoadBackup | This mib provides loading, backup and patch-related functions. | ||
| 1.3.6.1.4.1.2011.6.6.1 | NodehwLoadBackupMon | |||
| 1.3.6.1.4.1.2011.6.6.1.1 | TablehwLoadParaTable | not-accessible | current | Load parameter table, used to load various files to the host through the NMS. The indexes of this table are hwFrameIndex and hwSlotIndex of the board. For exam… |
| 1.3.6.1.4.1.2011.6.6.1.1.1 | RowhwLoadParaEntry | not-accessible | current | Load parameter table, used to load various files to the host through the NMS. The indexes of this entry are hwFrameIndex and hwSlotIndex of the board. For exam… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.1 | ColumnhwLoadServerIpAddr | read-write | current | The IP address of file server. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.2 | ColumnhwLoadMode | read-write | current | Load protocol. Options: 1.tftp(1) -indicates that the Trivial File Transfer Protocol (TFTP) is used to perform the loading through the network port. Select tft… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.3 | ColumnhwLoadFileName | read-write | current | The name of the file to be loaded. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.4 | ColumnhwLoadContent | read-write | current | Type of the loaded file. Options: 1.noloadcontent(-1) -no file. 2.program(1) -program file. 3.database(2) -database file. 4.patch(3) -patch file. 5.shellMacro(… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.5 | ColumnhwLoadBoardType | read-write | current | The type of the board to be loaded, which is defined in HUAWEI-TC-MIB.mib. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.6 | ColumnhwLoadPositionPara | read-write | current | Auxiliary parameters for locating a board to be loaded. When a file is loaded to an EMU, the value of this parameter is emuID. When a file is loaded to a modem… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.7 | ColumnhwLoadProcess | read-only | current | Loading progress. Range: 0-100. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.8 | ColumnhwLoadUserName | read-write | current | The name of load user, which is required in FTP mode and SFTP mode but is not required in any other modes. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.9 | ColumnhwLoadPassword | read-write | current | The load user password, which is required in FTP mode and SFTP mode but is not required in any other modes. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.10 | ColumnhwLoadAdminStatus | read-create | obsolete | Load Adminstatus. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.11 | ColumnhwLoadOperStatus | read-only | current | Operational Status. The object is not supported at present. Options: 1.inition(1) -initial state. 2.loading(2) -loading the file. 3.flashing(3)-saving the file… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.12 | ColumnhwLoadRequestId | read-write | current | The loading request ID, which identifies the loading request delivered by the NMS. According to the ID, you can query hwOperationInfoTable to obtain the status… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.13 | ColumnhwLoadServerPort | read-write | current | Monitoring port on the SFTP server. Range: 0-65535 Default: 22 The invalid value is 65535. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.14 | ColumnhwBatchLoadOptions | read-write | current | Batch load options. This object is used to determine whether the slot number of the active control board or the standby control board is selected. Options: 1.n… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.15 | ColumnhwLoadOntType | read-write | current | It indicates the ONT type. This object is used to specify the type of the ONTs that are upgraded in batches through the OLT. ONT type: MA5610, MA5616, MA5620G,… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.16 | ColumnhwLoadVersionFilter | read-write | current | ONT version list. It indicates version list of the ONTs that are upgraded in batched through the OLT. This leaf is used to specify the ONT versions that need u… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.17 | ColumnhwLoadExtServerInetAddressType | read-write | current | The type of address in hwLoadExtServerIPAddress. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.18 | ColumnhwLoadExtServerIPAddress | read-write | current | The IPv4, IPv6 or DNS address of LOAD Server. Note that, since this is an index to the table, the DNS name must be short enough to fit into the maximum length … |
| 1.3.6.1.4.1.2011.6.6.1.1.1.19 | ColumnhwLoadPacketSmart | read-write | current | This object is used to identify the loading mode of the package file. Options: 1.normal(1) -indicates that the entire package file is loaded into the system. 2… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.20 | ColumnhwLoadEncryptAlgorithm | read-write | current | This object is used to identify the encrypt algorithm of the load file. Options: 1.none(1) -indicates that the load file is not encrypt. 2.aes256cbc(2) -indica… |
| 1.3.6.1.4.1.2011.6.6.1.1.1.21 | ColumnhwLoadEncryptKey | read-write | current | This object is used to identify the encrypt key. |
| 1.3.6.1.4.1.2011.6.6.1.1.1.22 | ColumnhwLoadEncryptIV | read-write | current | This object is used to identify the initialization vector of the encrypt file. |
| 1.3.6.1.4.1.2011.6.6.1.2 | TablehwBackupParaTable | not-accessible | current | Backup parameter table, used to back up various files of the host through the NMS. This table is used to back up important system data. Therefore, configure a … |
| 1.3.6.1.4.1.2011.6.6.1.2.1 | RowhwBackupParaEntry | not-accessible | current | Backup parameter table, used to back up various files of the host through the NMS. The indexes of this entry are hwFrameIndex and hwSlotIndex of the board. For… |
| 1.3.6.1.4.1.2011.6.6.1.2.1.1 | ColumnhwBackupServerIpAddr | read-write | current | The IP address of file server. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.2 | ColumnhwBackupMode | read-write | current | Load protocol. Options: 1.tftp(1) -indicates that the backup is performed by using TFTP through the network port. Select tftp(1) when the transmission mode of … |
| 1.3.6.1.4.1.2011.6.6.1.2.1.3 | ColumnhwBackupFileName | read-write | current | The name of backup file. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.4 | ColumnhwBackupContent | read-write | current | Type of the backup file. Options: 1.nobackupcontent(-1) -no file. 2.database(1) -database file. 3.shellMacro(2) -shell macro file. 4.log(3) -log file. 5.bill(4… |
| 1.3.6.1.4.1.2011.6.6.1.2.1.5 | ColumnhwBackupProcess | read-only | current | Backup progress. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.6 | ColumnhwBackupUserName | read-write | current | The backup user name, which is required in FTP mode and SFTP mode but is not required in TFTP mode. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.7 | ColumnhwBackupPassword | read-write | current | The backup user password, which is required in FTP mode and SFTP mode but is not required in TFTP mode. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.8 | ColumnhwBackupBoardType | read-write | current | The type of the board to be backed up, which is defined in HUAWEI-TC-MIB.mib. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.9 | ColumnhwBackupRequestID | read-write | current | The backup request ID, which identifies a backup request delivered by the NMS. According to the ID, you can query hwOperationInfoTable to obtain the status and… |
| 1.3.6.1.4.1.2011.6.6.1.2.1.10 | ColumnhwBackupServerPort | read-write | current | SFTP server listen port. Range: 0-65535 Default: 22 The invalid value is 65535. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.11 | ColumnhwBackupPositionPara | read-write | current | Auxiliary parameters for locating a board to be backed up. When a file is backed up to the EMU, the value of this parameter is emuID. When a file is backed up … |
| 1.3.6.1.4.1.2011.6.6.1.2.1.12 | ColumnhwBackupExtServerInetAddressType | read-write | current | The type of address in hwBackupExtServerIPAddress. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.13 | ColumnhwBackupExtServerIPAddress | read-write | current | The IPv4, IPv6 or DNS address of BACKUP Server. Note that, since this is an index to the table, the DNS name must be short enough to fit into the maximum lengt… |
| 1.3.6.1.4.1.2011.6.6.1.2.1.14 | ColumnhwBackupResouce | read-write | current | The backup resource. |
| 1.3.6.1.4.1.2011.6.6.1.2.1.15 | ColumnhwBackupPrivatePara | read-write | current | Proprietary parameter carried during file backup. The parameter is related to the contents of the backup file. The backup file is Vdsl2 xlin. The proprietary p… |
| 1.3.6.1.4.1.2011.6.6.1.4 | NodehwBackupAndRestoreConfig | |||
| 1.3.6.1.4.1.2011.6.6.1.4.1 | ScalarhwBackupAndRestore | read-write | current | The running configuration in the system has been backed-up to flash or disk, or restored. The object is not supported at present. Options: 1. copyMemToFlash(1)… |
| 1.3.6.1.4.1.2011.6.6.1.4.2 | ScalarhwConfigChangedSequence | read-only | obsolete | The sequence of system configuration changed. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.1.5 | TablehwCfgOperTable | not-accessible | obsolete | New MIB node added by BWA production. Activating rollback operation table, used to activate rollback operation. The indexes of this table are hwFrameIndex and … |
| 1.3.6.1.4.1.2011.6.6.1.5.1 | RowhwCfgOperEntry | not-accessible | obsolete | New MIB node added by BWA production. Activating rollback operation table, used to activate rollback operation. The indexes of this entry are hwFrameIndex and … |
| 1.3.6.1.4.1.2011.6.6.1.5.1.1 | ColumnhwConfigAdminStatus | read-write | obsolete | configuration administration status. Options: 1.activeDefaultCfg(0) -activate default configuration. 2.activeBackupSw(1) -activate the backed up software. 3.be… |
| 1.3.6.1.4.1.2011.6.6.1.5.1.2 | ColumnhwConfigOperTimeLine | read-write | obsolete | Time limit of canceling rollback operation, unit is day, 0 means canceling rollback immediately. This node is just used for the rollback canceling operation. |
| 1.3.6.1.4.1.2011.6.6.1.5.1.3 | ColumnhwConfigOperProgress | read-only | obsolete | Progress indication. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.1.5.1.4 | ColumnhwConfigOperStatus | read-only | obsolete | Flag of whether the file can be rollbacked. Options: 1.enableRollback(1) -the file can be rollbacked. 2.disableRollback(2) -the file can not be rollbacked. The… |
| 1.3.6.1.4.1.2011.6.6.1.6 | NodehwCpeLoadPara | |||
| 1.3.6.1.4.1.2011.6.6.1.6.1 | ScalarhwServerIpAddrForTerminal | read-write | obsolete | This object indicates the IP address of TFTP server and it is used for the loading to the terminal. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.1.7 | TablehwAgentUpdateOntTable | not-accessible | current | The optical network unit (ONT) batch upgrade management table. When ONT batch upgrade through OLT agent is started on the NMS, you can query the upgrade status… |
| 1.3.6.1.4.1.2011.6.6.1.7.1 | RowhwAgentUpdateOntEntry | not-accessible | current | The optical network unit (ONT) batch upgrade management table. When ONT batch upgrade through OLT agent is started on the NMS, you can query the upgrade status… |
| 1.3.6.1.4.1.2011.6.6.1.7.1.1 | ColumnhwOntFrameIndex | read-only | current | The number of the frame in the device. |
| 1.3.6.1.4.1.2011.6.6.1.7.1.2 | ColumnhwOntSlotIndex | read-only | current | The number of the slot. The present slot index is determined by its physical position in the board. |
| 1.3.6.1.4.1.2011.6.6.1.7.1.3 | ColumnhwOntPortIndex | read-only | current | The number of the port. |
| 1.3.6.1.4.1.2011.6.6.1.7.1.4 | ColumnhwUpdateOntIndex | read-only | current | ONT ID. |
| 1.3.6.1.4.1.2011.6.6.1.7.1.5 | ColumnhwOntUpdateState | read-only | current | ONT update state. data structure: ONT IP + ONT update state | ONT NUM | ONT IP | ONT update | ONT IP | ONT update | _ _ | | (2B) | (4B) | state (1B) | (2B) | s… |
| 1.3.6.1.4.1.2011.6.6.1.7.1.6 | ColumnhwOntUpdateStateAndProgress | read-only | current | ONT update state and load progress or load error num. data structure: ONT IP + ONT update state + load progress/error num | ONT NUM | ONT IP | ONT update | loa… |
| 1.3.6.1.4.1.2011.6.6.1.8 | NodehwUndoLoadBackup | |||
| 1.3.6.1.4.1.2011.6.6.1.8.1 | ScalarhwUndoOperType | read-write | current | Cancel the operation of this type. You can cancel the operations of loading and backing up the database through this node when you incorrectly perform the oper… |
| 1.3.6.1.4.1.2011.6.6.1.8.2 | ScalarhwUndoContent | read-write | current | Cancel the contents of the operation. You can cancel the operations of loading and backing up the database through this node when you incorrectly perform the o… |
| 1.3.6.1.4.1.2011.6.6.1.9 | ScalarhwLoadOperFlag | read-only | current | The object is used to identify whether the current system can load software. Options: 1.enableLoad(1) -The current system can load software. 2.disableLoad(2) -… |
| 1.3.6.1.4.1.2011.6.6.2 | NodehwPatch | |||
| 1.3.6.1.4.1.2011.6.6.2.1 | TablehwPatchTable | not-accessible | obsolete | Do operations on single patch. The table is not supported at present. The indexes of this table are hwFrameIndex, hwSlotIndex and hwPatchId. |
| 1.3.6.1.4.1.2011.6.6.2.1.1 | RowhwPatchEntry | not-accessible | obsolete | Do operations on single patch. The table is not supported at present. The indexes of this entry are hwFrameIndex, hwSlotIndex and hwPatchId. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.1 | ColumnhwPatchId | not-accessible | obsolete | Patch ID. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.2 | ColumnhwPatchDescription | read-only | obsolete | Patch Description. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.3 | ColumnhwPatchFuncNum | read-only | obsolete | Function number included in patch. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.4 | ColumnhwPatchTextLen | read-only | obsolete | Patch text length. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.5 | ColumnhwPatchDataLen | read-only | obsolete | Patch data length. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.6 | ColumnhwPatchType | read-only | obsolete | Patch type. The object is not supported at present. Options: 1.common(1) -Patch type is common. 2.temporary(2) -Patch type is temporary. |
| 1.3.6.1.4.1.2011.6.6.2.1.1.7 | ColumnhwPatchAdminStatus | read-write | obsolete | Patch administrative status. The object is not supported at present. Options: 1.active(1) -indicates patch administrative status is active. 2.deactive(2)-indic… |
| 1.3.6.1.4.1.2011.6.6.2.1.1.8 | ColumnhwPatchOperState | read-only | obsolete | Patch operative state. The object is not supported at present. Options: 1.patchActive(1) -Patch operative state is active. 2.patchDeActive(2)-Patch operative s… |
| 1.3.6.1.4.1.2011.6.6.2.2 | TablehwPatchStatTable | not-accessible | obsolete | Information of patch statistics. The table is not supported at present. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.6.2.2.1 | RowhwPatchStatEntry | not-accessible | obsolete | Information of patch statistics. The table is not supported at present. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.6.2.2.1.1 | ColumnhwPatchStatNumMax | read-only | obsolete | The maximum number of patches can be supported in system. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.2.1.2 | ColumnhwPatchStatTextMax | read-only | obsolete | Size of patch code area. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.2.1.3 | ColumnhwPatchStatDataMax | read-only | obsolete | Size of patch data area. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.2.1.4 | ColumnhwPatchStatTextUsed | read-only | obsolete | Patch code area used. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.2.1.5 | ColumnhwPatchStatDataUsed | read-only | obsolete | Patch data area used. The object is not supported at present. |
| 1.3.6.1.4.1.2011.6.6.2.3 | TablehwPatchNewTable | not-accessible | current | The patch information description table, which describes the information about the patches in the system, including the running status of the patches. At the s… |
| 1.3.6.1.4.1.2011.6.6.2.3.1 | RowhwPatchNewEntry | not-accessible | current | The patch information description table, which describes the information about the patches in the system, including the running status of the patches. At the s… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.1 | ColumnhwNewPatchName | not-accessible | current | The patch name and the table index. For example, the ASCII code of patch name SPH001 after conversion is 83.80.72.48.48.49. |
| 1.3.6.1.4.1.2011.6.6.2.3.1.2 | ColumnhwNewPatchDescription | read-only | current | The description about the patch. |
| 1.3.6.1.4.1.2011.6.6.2.3.1.3 | ColumnhwNewPatchType | read-only | current | The type of the patch. Options: 1.hotcommon(1) -indicates the released hot patch. 2.hottemporary(2) -indicates the temporary hot patch. 3.coldcommon(3) -indica… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.4 | ColumnhwNewPatchAdminStatus | read-write | current | Patch management operations. Options: 1.nooperation(-1) -the state of start. 2.active(1) -activate a patch. 3.deactive(2) -deactivate a patch. 4.delete(3) -del… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.5 | ColumnhwNewPatchOperState | read-only | current | The current state of the patch. Options: 1.patchActive(1) -indicates that a patch is in the activated state. 2.patchDeActive(2) -indicates that a patch is in t… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.6 | ColumnhwNewPatchRely | read-only | current | The name of the patch on which the current patch is dependent. If the current patch has a dependent patch, the name of the dependent patch is displayed. If the… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.7 | ColumnhwNewPatchRelied | read-only | current | The name of the patch that is dependent on the current patch. If a patch is dependent on the current patch, the name of the patch is displayed. If multiple pat… |
| 1.3.6.1.4.1.2011.6.6.2.3.1.8 | ColumnhwNewPatchRequestID | read-write | current | Indicates the requestid of a patch asynchronous operation. To perform such an operation, use this parameter. Query object hwOperationInfoTable to obtain the op… |
| 1.3.6.1.4.1.2011.6.6.2.4 | NodehwPatchTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.6.2.4.1 | ScalarhwPatchResult | accessible-for-notify | current | The result of patch rollback. 0 indicates that patch rollback is successful. Nonzero digits are error code indicating that patch rollback failed. For the meani… |
| 1.3.6.1.4.1.2011.6.6.2.4.2 | ScalarhwPatchOperation | accessible-for-notify | current | The operation of patching file. Options: 1.patchnull(0) -patchnull. 2.patchload(1) -Load the Patch. 3.patchactive(2) -Active the Patch. 4.patchdeactive(3) -Dea… |
| 1.3.6.1.4.1.2011.6.6.2.5 | NodehwPatchTraps | |||
| 1.3.6.1.4.1.2011.6.6.2.5.1 | NodehwPatchCommonTraps | |||
| 1.3.6.1.4.1.2011.6.6.2.5.1.0 | NodehwPatchCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.1 | NotificationhwPatRollBackOkTrap | current | This trap message is reported when the patch rollback is successful. | |
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.2 | NotificationhwPatRollBackFailTrap | current | This trap message is reported when the patch rollback fails. | |
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.3 | NotificationhwPatColdPatDiffTrap | current | This trap message is reported when the states of cold patches on the active and standby control boards are inconsistent. | |
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.4 | NotificationhwPatchInActiveTrap | current | This trap message is reported when a patch stays in the activated state for 24 hours for the first time. 24 hours later, if the patch is still in the activated… | |
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.5 | NotificationhwPatchInDeActiveTrap | current | This trap message is reported when a patch stays in the deactivated state for 24 hours for the first time. 24 hours later, if the patch is still in the deactiv… | |
| 1.3.6.1.4.1.2011.6.6.2.5.1.0.6 | NotificationhwPatchRestoreTrap | current | This trap message is reported when the standby control board is reset because the patch statuses on the active and standby control boards are different. | |
| 1.3.6.1.4.1.2011.6.6.2.5.2 | NodehwPatchAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.6.2.5.2.0 | NodehwPatchAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.6.2.5.2.0.1 | NotificationhwPatchInActiveStateTrap | current | This trap message is reported when a patch stays in the activated state for 24 hours for the first time. 24 hours later, if the patch is still in the activated… | |
| 1.3.6.1.4.1.2011.6.6.2.5.2.0.2 | NotificationhwPatchInDeactiveStateTrap | current | This trap message is reported when a patch stays in the deactivated state for 24 hours for the first time. 24 hours later, if the patch is still in the deactiv… | |
| 1.3.6.1.4.1.2011.6.6.2.5.2.0.3 | NotificationhwColdPatchInconsistentTrap | current | This trap message is reported when the states of cold patches on the active and standby control boards are inconsistent. | |
| 1.3.6.1.4.1.2011.6.6.2.5.2.0.4 | NotificationhwPatchNeedResetBoardTrap | current | After the patch is activated or deleted, the operation takes effect in certain cases only after board or system reset. In such cases, if the board or system is… | |
| 1.3.6.1.4.1.2011.6.6.3 | NodehwBackupDataToServer | |||
| 1.3.6.1.4.1.2011.6.6.3.1 | TablehwFileServerTable | not-accessible | current | The parameter table for configuring a server for the device. The indexes of this table are hwFileServerType, hwFileDataType and hwFileServerPriority. |
| 1.3.6.1.4.1.2011.6.6.3.1.1 | RowhwFileServerEntry | not-accessible | current | The parameter table for configuring a server for the device. The indexes of this entry are hwFileServerType, hwFileDataType and hwFileServerPriority. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.1 | ColumnhwFileServerType | not-accessible | current | The server type. Options: 1.autobackup(1) -indicates the server for automatic backup. 2.autoload(2) -indicates the server for automatic loading. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.2 | ColumnhwFileDataType | not-accessible | current | The data type of a file. Options: 1.database(1) -indicates that the backup file type is database file. 2.configurationfile(2) -indicates that the backup file t… |
| 1.3.6.1.4.1.2011.6.6.3.1.1.3 | ColumnhwFileServerPriority | not-accessible | current | The type (active/standby) of the server. The system can be configured with a maximum of two servers. One as the active server and the other as the standby serv… |
| 1.3.6.1.4.1.2011.6.6.3.1.1.4 | ColumnhwFileServerIpAddress | read-create | current | The IP address of the server. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.5 | ColumnhwFileServerMode | read-create | current | Protocal be used to transfer the file. Options: 1.tftp(1)-indicates that TFTP is used to perform the backup through the network port. When the transmission mod… |
| 1.3.6.1.4.1.2011.6.6.3.1.1.6 | ColumnhwFileUser | read-create | current | The backup user name, which is required in FTP mode and SFTP mode but is not required in TFTP mode. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.7 | ColumnhwFileUserPassword | read-create | current | The backup password, which is required in FTP mode and SFTP mode but is not required in TFTP mode. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.8 | ColumnhwFilePathName | read-create | current | The path to the backup file, which is not required in FTP mode, SFTP mode and TFTP mode. |
| 1.3.6.1.4.1.2011.6.6.3.1.1.9 | ColumnhwFilePort | read-create | current | Port number. It is only used by SFTP. Default: 22 |
| 1.3.6.1.4.1.2011.6.6.3.1.1.10 | ColumnhwFileServerState | read-only | current | Describe whether the server is current server. Options: 1.currentserver(1) -indicates that the server is the current server. 2.notcurrentserver(2) -indicates t… |
| 1.3.6.1.4.1.2011.6.6.3.1.1.11 | ColumnhwFileServerRowStatus | read-create | current | Operation status of NMS station, the NMS station can be createAndGo(4) and deleted(6). createAndGo(4) is supplied to create a new instance of a conceptual row.… |
| 1.3.6.1.4.1.2011.6.6.3.2 | TablehwBackupPeriodTable | not-accessible | current | The periodic backup table of the device data.The index of this table is hwFileDataType. hwFileDataType is the file data type. The index value is in the range o… |
| 1.3.6.1.4.1.2011.6.6.3.2.1 | RowhwBackupPeriodEntry | not-accessible | current | The periodic backup table of the device data.The index of this entry is hwFileDataType. hwFileDataType is the file data type. The index value is in the range o… |
| 1.3.6.1.4.1.2011.6.6.3.2.1.1 | ColumnhwBackupInterval | read-write | current | The time interval of periodic backup.The interval is in the unit of day. Range: 1-10 Default: 1 Unit: day |
| 1.3.6.1.4.1.2011.6.6.3.2.1.2 | ColumnhwBackupTime | read-write | current | The time point of the periodic backup. It is in the format of <hh:mm>. Data's default backup time is 00:00, configuration's default backup time is 01:00, alarm… |
| 1.3.6.1.4.1.2011.6.6.3.2.1.3 | ColumnhwBackupPeriodSwitch | read-write | current | Period backup switch. Options: 1.on(1) -indicates that periodic backup is configured. 2.off(2) -indicates that periodic backup is not configured. The default v… |
| 1.3.6.1.4.1.2011.6.6.3.3 | NodehwBackupCondition | |||
| 1.3.6.1.4.1.2011.6.6.3.3.2 | ScalarhwBackupAlarmCondition | read-write | current | Setting and querying the condition of backing up the alarm. Range: 500-1000, indicating that the latest 500-1000 alarms of the current system can be backed up.… |
| 1.3.6.1.4.1.2011.6.6.3.3.3 | ScalarhwBackupLogCondition | read-write | current | Setting and querying the condition of backing up the log. Range: 100-250, indicating that the latest 100-250 logs of the current system can be backed up. Defau… |
| 1.3.6.1.4.1.2011.6.6.3.3.4 | ScalarhwBackupLastwordCondition | read-write | current | Setting and querying the condition of backing up the last word. Range: 200-300, indicating that the latest 200-300 last words of the current system can be back… |
| 1.3.6.1.4.1.2011.6.6.3.3.5 | ScalarhwBackupAlarmConditionSwitch | read-write | current | Configuring the function of backing up the alarm. Options: 1.on(1) -indicates that the alarm information is backed up according to the configured conditions. 2… |
| 1.3.6.1.4.1.2011.6.6.3.3.6 | ScalarhwBackupLogConditionSwitch | read-write | current | Configuring the function of backing up the log. Options: 1.on(1) -indicates that the log information is backed up according to the configured conditions. 2.off… |
| 1.3.6.1.4.1.2011.6.6.3.3.7 | ScalarhwBackupLastwordConditionSwitch | read-write | current | Configuring the function of backing up the last word. Options: 1.on(1) -indicates that the last word information is backed up according to the configured condi… |
| 1.3.6.1.4.1.2011.6.6.3.4 | TablehwBackupByHandTable | not-accessible | current | The manual data backup table. The index of this table is hwFileDataType. hwFileDataType is the file data type. The index value is in the range of 1-9 and 11-13… |
| 1.3.6.1.4.1.2011.6.6.3.4.1 | RowhwBackupByHandEntry | not-accessible | current | The manual data backup table. The index of this entry is hwFileDataType. hwFileDataType is the file data type. The index value is in the range of 1-9 and 11-13… |
| 1.3.6.1.4.1.2011.6.6.3.4.1.1 | ColumnhwBackupByHand | read-write | current | Whether the backup is performed manually. The value of hwBackupByHand can only be set to 1. When the value is set to 1, the data backup is triggered. |
| 1.3.6.1.4.1.2011.6.6.4 | NodehwOperationInfo | |||
| 1.3.6.1.4.1.2011.6.6.4.1 | TablehwOperationInfoTable | not-accessible | current | Operation information table. Through this table, you can query the status and results of data saving, loading, backup, upgrading without service interruption, … |
| 1.3.6.1.4.1.2011.6.6.4.1.1 | RowhwOperationInfoEntry | not-accessible | current | Operation information table. Through this table, you can query the status and results of data saving, loading, backup, upgrading without service interruption, … |
| 1.3.6.1.4.1.2011.6.6.4.1.1.1 | ColumnhwOperationReqID | read-only | current | The requestID of this operation. This object together with hwOperationReqType, identifies different operations of different types. |
| 1.3.6.1.4.1.2011.6.6.4.1.1.2 | ColumnhwOperationReqType | read-only | current | Operation type. Options: 1. dataSave(1) -indicates the data saving operation through the NMS. 2. load(2) -indicates the loading operation through the NMS. 3. b… |
| 1.3.6.1.4.1.2011.6.6.4.1.1.3 | ColumnhwOperationReqStatus | read-only | current | Current status of an operation request. Options: 1.initial(1) -indicates that the operation is in the preparation phase. 2.datascanning(2)-indicates that the o… |
| 1.3.6.1.4.1.2011.6.6.4.1.1.4 | ColumnhwOperationProgress | read-only | current | The progress of the operation. Range: 0-100. |
| 1.3.6.1.4.1.2011.6.6.4.1.1.5 | ColumnhwOperationReqErrStatus | read-only | current | The error code of this operation. The returned error code is an NMS error code. The value 0 means 'No error'; The value 6561510 means 'Failed to transfer the f… |
| 1.3.6.1.4.1.2011.6.6.4.1.1.6 | ColumnhwOperationReqStartTime | read-only | current | Time when the operation starts. |
| 1.3.6.1.4.1.2011.6.6.4.1.1.7 | ColumnhwOperationReqEndTime | read-only | current | Time when the operation ends. |
| 1.3.6.1.4.1.2011.6.6.4.1.1.8 | ColumnhwOperationFileDigest | read-only | current | Digest value of the operating file, such as 0x13AC06A62E47FD51F95D2BA243CD0346, 0 means invalid value. |
| 1.3.6.1.4.1.2011.6.6.5 | NodehwStatusCollect | |||
| 1.3.6.1.4.1.2011.6.6.5.1 | TablehwStatusInfoTable | not-accessible | current | The table contains all collectable status information in the system. The index of this table is hwStatusID. The index value is the status ID. The table can onl… |
| 1.3.6.1.4.1.2011.6.6.5.1.1 | RowhwStatusInfoEntry | not-accessible | current | The table contains all collectable status information in the system. The index of this entry is hwStatusID. The index value is the status ID. The table can onl… |
| 1.3.6.1.4.1.2011.6.6.5.1.1.1 | ColumnhwStatusID | not-accessible | current | Status ID.Be consistent with the status parameters in the hwStatusCollectMask. |
| 1.3.6.1.4.1.2011.6.6.5.1.1.2 | ColumnhwStatusDescription | read-only | current | Status description. statusID | description cpu(0) | CPU usage of the control board board(1) | running status of the board frame(2) | running status of the shel… |
| 1.3.6.1.4.1.2011.6.6.5.2 | ScalarhwStatusCollectIndicate | read-write | current | Start to collect status or stop collecting status. Options: 1. start(1) -Collecting status starts. 2. stop(2) -Collecting status stops. |
| 1.3.6.1.4.1.2011.6.6.5.3 | ScalarhwStatusCollectMask | read-write | current | Collecting status mask. Options: 1.cpu(0) -indicates that the CPU usage of the control board. 2.board(1) -indicates that the running status of the board. 3.fra… |
| 1.3.6.1.4.1.2011.6.6.5.4 | ScalarhwStatusCollectType | read-write | current | Collecting type. Options: 1.fault(1) -Collecting system fault status information. 2.all(2) -Collecting all the system information. When the collection start co… |
| 1.3.6.1.4.1.2011.6.6.5.5 | ScalarhwStatusCollectProgress | read-only | current | The progress of collecting the device status information about the object can be queried at the specified time. If the health diagnosis has not started, the di… |
| 1.3.6.1.4.1.2011.6.6.5.6 | ScalarhwStatusCollectResult | read-only | current | After the collection of the status information about an object is complete, the collection result can be queried. If the health diagnosis has not started, or t… |
| 1.3.6.1.4.1.2011.6.6.5.7 | ScalarhwStatusCollectResultSize | read-only | current | The size of the Collecting result, unit is byte. |
| 1.3.6.1.4.1.2011.6.6.5.8 | ScalarhwStatusCollectReady | read-only | current | Ready status for health diagnosis. Options: 1.ready(1) -The device is ready and health diagnosis can start. 2.notReady(2) -The device is not ready and health d… |
| 1.3.6.1.4.1.2011.6.6.6 | NodehwLoadPara | |||
| 1.3.6.1.4.1.2011.6.6.6.1 | ScalarhwSysMultiCastLoad | read-write | current | Configuring the function of the MDU upgrade through OLT agent. Options: 1.enabled(1) -indicates that the upgrade is enabled. 2.disabled(2) -indicates that the … |
| 1.3.6.1.4.1.2011.6.6.6.2 | ScalarhwSDLoadResult | read-only | obsolete | The results of file loading from the SD card by the host during the query of the SD card office deployment. The host assembles the result of SD card loading to… |
| 1.3.6.1.4.1.2011.6.6.6.3 | ScalarhwDataReplaceResult | read-only | current | The result of load database and start up. Options: 1. Success(1) -device load database start up successfull. 2. Failure(2) -device load database start up failu… |
| 1.3.6.1.4.1.2011.6.6.7 | NodehwLoadBackupTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.6.7.1 | ScalarhwLoadBackupResult | accessible-for-notify | current | The result of load/backup. The value 0 means 'No error'; The value 6561510 means 'Failed to transfer the file'; The value 6561553 means 'Username or password e… |
| 1.3.6.1.4.1.2011.6.6.7.2 | ScalarhwLoadBackupGuage | accessible-for-notify | current | The gauge of load/backup. |
| 1.3.6.1.4.1.2011.6.6.7.3 | ScalarhwRollResult | accessible-for-notify | current | Result of the rollback operation. Options: 1. rollOk(1) -The rollback is successful. 2. rollFailed(2) -The rollback fails. 3. rollError(3) -An abnormality occu… |
| 1.3.6.1.4.1.2011.6.6.7.4 | ScalarhwLoadBackObject | accessible-for-notify | current | Load/backup object. Options: 1.loadbackupobjectmasterboard(1) -Load the object of master board. 2.loadbackupobjectmastersubboard(2) -Load the object of master … |
| 1.3.6.1.4.1.2011.6.6.7.5 | ScalarhwBackupContentLocation | accessible-for-notify | current | Backup content location, main board or standby board. |
| 1.3.6.1.4.1.2011.6.6.7.6 | ScalarhwBackupFileLength | accessible-for-notify | current | The length of backup file. |
| 1.3.6.1.4.1.2011.6.6.7.7 | ScalarhwNewFileDataType | accessible-for-notify | current | The data type of a file. Options: 1.lastword(1) -indicates that the backup file type is last word. 2.cdr(2) -indicates that the backup file type is multicast C… |
| 1.3.6.1.4.1.2011.6.6.7.8 | ScalarhwAutoBackupResult | accessible-for-notify | current | AutoBackup result. 0. -indicates that the backup is successful. 1. -indicates that the backup fails. 2. -indicates that the server is not configured. 3. -indic… |
| 1.3.6.1.4.1.2011.6.6.7.9 | ScalarhwSaveResult | accessible-for-notify | current | The result of save. Options: 1. succeeded(0) -indicates that the operation is successful. 2. failed(1) -indicates that the operation fails. |
| 1.3.6.1.4.1.2011.6.6.8 | NodehwLoadBackupTraps | |||
| 1.3.6.1.4.1.2011.6.6.8.1 | NodehwLoadBackupCommonTraps | |||
| 1.3.6.1.4.1.2011.6.6.8.1.0 | NodehwLoadBackupCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.6.8.1.0.1 | NotificationhwNoNeedSaveTrap | current | There is no need to save the database. After the database is saved, this trap message is reported when the database is saved again while no change is made on t… | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.2 | NotificationhwBackupGuageTrap | obsolete | This trap message is reported when a backup operation starts and it tells us the guage of backup. | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.3 | NotificationhwNoRollBackStartTrap | current | This trap message is reported when duplicating files starts from the master area to the slave area in the board. | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.4 | NotificationhwNoRollBackResultTrap | current | This trap message is reported when the duplication of a file from the active area to the standby area is complete. | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.5 | NotificationhwSaveStartTrap | current | This trap message is reported when the data saving starts. | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.6 | NotificationhwLoadTransferFileTrap | current | This trap message is reported when the file transfer during loading is complete. | |
| 1.3.6.1.4.1.2011.6.6.8.1.0.7 | NotificationhwSaveCompleteTrap | current | This trap message is reported when the data saving is complete. | |
| 1.3.6.1.4.1.2011.6.6.8.2 | NodehwLoadBackupAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.6.8.2.0 | NodehwLoadBackupAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.6.8.2.0.1 | NotificationhwDuplicatingFileStartTrap | current | This trap message is reported when duplicating files starts from the master area to the slave area in the board. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.2 | NotificationhwDuplicatingFileSuccessTrap | current | This trap message is reported when duplicating files succeeded from the master area to the slave area in the board. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.3 | NotificationhwDuplicatingFileFailTrap | current | This trap message is reported when duplicating files failed from the master area to the slave area in the board. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.4 | NotificationhwLoadStartTrap | current | This trap message is reported when the loading operation starts. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.5 | NotificationhwLoadSuccessTrap | current | This trap message is reported when the loading is successful. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.6 | NotificationhwLoadFailTrap | current | This trap message is reported when the loading fails. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.7 | NotificationhwBackupStartTrap | current | This trap message is reported when the backup starts. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.8 | NotificationhwBackupSuccessTrap | current | This trap message is reported when the backup is successful. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.9 | NotificationhwBackupFailTrap | current | This trap message is reported when the backup fails. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.10 | NotificationhwAutoBackupFailTrap | current | This trap message is reported when the automatic backup fails. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.11 | NotificationhwAutoLoadStartTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.12 | NotificationhwAutoLoadCompleteTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.13 | NotificationhwAutoLoadFailTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.14 | NotificationhwAutoBackupSuccessTrap | current | This trap is reported when a log or an alarm is automatically uploaded successfully. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.15 | NotificationhwLoadInStandbyChannelTrap | current | This trap is reported the main channel of loading is invalid, load in standby channel. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.16 | NotificationhwAutoLoadBoardStartTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.17 | NotificationhwAutoLoadBoardCompleteTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.18 | NotificationhwAutoLoadBoardFailTrap | current | During the start of the board, if the board software version is different from the board software version configured in the system, the system upgrades the boa… | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.19 | NotificationhwSaveFailTrap | current | This trap message is reported when the auto data saving is failed. | |
| 1.3.6.1.4.1.2011.6.6.8.2.0.20 | NotificationhwSaveRecoverTrap | current | This trap message is reported when the data saving is successful. | |
| 1.3.6.1.4.1.2011.6.6.9 | TablehwProgramAndDataInfoTable | not-accessible | current | Program and data information table. Through this table, you can query the status and version of program and data in active board or standby board . The index o… |
| 1.3.6.1.4.1.2011.6.6.9.1 | RowhwProgramAndDataInfoEntry | not-accessible | current | Program and data information table. Through this table, you can query the status and version of program and data in active board or standby board . The index o… |
| 1.3.6.1.4.1.2011.6.6.9.1.1 | ColumnhwMainboardID | read-only | current | Operation type. Options: 1.active(1) -indicates the active board. 2.standby(2) -indicates the standby board. |
| 1.3.6.1.4.1.2011.6.6.9.1.2 | ColumnhwProagramActiveArea | read-only | current | Current infomation of the board program running. Options: 1.areaA(1) -indicates that the program is running on area A. 2.areaB(2) -indicates that the program i… |
| 1.3.6.1.4.1.2011.6.6.9.1.3 | ColumnhwDataActiveArea | read-only | current | Current infomation of the board data running. Options: 1.areaA(1) -indicates that the data is running on area A. 2.areaB(2) -indicates that the data is running… |
| 1.3.6.1.4.1.2011.6.6.9.1.4 | ColumnhwProagramAreaAVersion | read-only | current | Current version of the program area A. |
| 1.3.6.1.4.1.2011.6.6.9.1.5 | ColumnhwProagramAreaBVersion | read-only | current | Current version of the program area B. |
| 1.3.6.1.4.1.2011.6.6.9.1.6 | ColumnhwDataAreaAVersion | read-only | current | Current version of the data area A. |
| 1.3.6.1.4.1.2011.6.6.9.1.7 | ColumnhwDataAreaBVersion | read-only | current | Current version of the data area B. |