HUAWEI-MPLSOAM-MIB
169 objects
The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
Imported Objects
| HUAWEI-MIB | hwMpls |
| HUAWEI-MPLS-EXTEND-MIB | hwMplsTunnelSignalProto |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7 | IdentityhwMplsOam | of | The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the c… | |
| 1.3.6.1.4.1.2011.5.12.7.1 | NodehwMplsOamPs | |||
| 1.3.6.1.4.1.2011.5.12.7.1.1 | NodehwMplsOamObjects | |||
| 1.3.6.1.4.1.2011.5.12.7.1.1.1 | ScalarhwMplsOamCapability | read-write | current | Whether OAM is globally capable. 0: incapable; 1: capable; 2: capable(basedItu); The default value is incapable. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2 | TablehwMplsOamIgrTable | not-accessible | current | This table specifies per-LSP MPLS OAM capability and associated information, such as IgrTunnName and IgrDetType. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1 | RowhwMplsOamIgrEntry | not-accessible | current | An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 | ColumnhwMplsOamIgrIndex | accessible-for-notify | current | The interface index of the detected tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 | ColumnhwMplsOamIgrTunnName | read-create | current | The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 | ColumnhwMplsOamIgrDetType | read-create | current | There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sin… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 | ColumnhwMplsOamIgrDetFreq | read-create | current | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequenc… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 | ColumnhwMplsOamIgrRevType | read-create | current | When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse L… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 | ColumnhwMplsOamIgrRevLspName | read-create | current | The object indicates name of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 | ColumnhwMplsOamIgrRevLsrId | read-create | current | Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 | ColumnhwMplsOamIgrRevSessTunnId | read-create | current | Only for ingress, the object indicates the session tunnel ID of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9 | ColumnhwMplsOamIgrEnable | read-create | current | Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10 | ColumnhwMplsOamIgrValid | read-only | current | 0: stop detect; 1: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11 | ColumnhwMplsOamIgrAvaState | read-only | current | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP de… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12 | ColumnhwMplsOamIgrDefectType | read-only | current | Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM information. There are six types o… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 | ColumnhwMplsOamIgrRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.14 | ColumnhwMplsOamIgrCompatibilityMode | read-create | current | 1: PtnMode; 2: RouterMode; Valid only for the ingress configuration. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.15 | ColumnhwMplsOamIgrBDIFreq | read-create | current | BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the f… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3 | TablehwMplsOamEgrTable | not-accessible | current | This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 | RowhwMplsOamEgrEntry | not-accessible | current | An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 | ColumnhwMplsOamEgrLspName | accessible-for-notify | current | The object indicates the name of static LSP at egress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 | ColumnhwMplsOamEgrLsrId | accessible-for-notify | current | The object indicates the Ingress LSR ID of the LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 | ColumnhwMplsOamEgrSessTunnId | accessible-for-notify | current | The object indicates the the Ingress session tunnel ID of the LSP.. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 | ColumnhwMplsOamEgrDetType | read-create | current | 0: invalid, if auto-protocol, this detect type is invalid; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 | ColumnhwMplsOamEgrDetFreq | read-create | current | 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 | ColumnhwMplsOamEgrRevType | read-create | current | When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is transferred through the reverse LS… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 | ColumnhwMplsOamEgrRevTunnName | read-create | current | The object indicates the name of a reverse tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 | ColumnhwMplsOamEgrAutoEn | read-create | current | If autoprotocol, then the egress can process extended FDI sent by ingress. 0: disable; 1: enable; Valid only for the egress configuration. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 | ColumnhwMplsOamEgrAutoOvertime | read-create | current | This time is set at the egress. If the egress receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the egress … |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 | ColumnhwMplsOamEgrBDIFreq | read-create | current | BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the f… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 | ColumnhwMplsOamEgrEnable | read-create | current | Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR … |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 | ColumnhwMplsOamEgrValid | read-only | current | 1: stop detect; 2: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 | ColumnhwMplsOamEgrAvaState | read-only | current | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP de… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 | ColumnhwMplsOamEgrDefectType | read-only | current | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 | ColumnhwMplsOamEgrRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4 | TablehwMplsOamRlsnTable | not-accessible | current | This table specifies RLSN capability and associated information, such as RlsnLsrId and RlsnLsrId. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1 | RowhwMplsOamRlsnEntry | not-accessible | current | An entry in this table is created by an LSR to binding the name, lsr-id and tunnel-id of the LSP at egress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1 | ColumnhwMplsOamRlsnLspName | read-create | current | For egress, the object indicates name of the LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2 | ColumnhwMplsOamRlsnLsrId | read-create | current | For egress, the object indicates the Ingress LSR ID of the LSP |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3 | ColumnhwMplsOamRlsnSessTunnId | read-create | current | For egress, the object indicates the Ingress session tunnel ID of the LSP |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4 | ColumnhwMplsOamRlsnIfIndex | read-only | current | The object indicates the index of outbound interface. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5 | ColumnhwMplsOamRlsnIfName | read-create | current | The object indicates the name of outbound interface. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6 | ColumnhwMplsOamRlsnIsDown | read-only | current | 1: up 2: down |
| 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7 | ColumnhwMplsOamRlsnRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.5 | ScalarhwMplsOamView | read-create | current | Create or delete the MPLS OAM view. 1: create mplsOam; 0: delete mplsOam; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6 | TablehwMplsOamL2vcTable | not-accessible | current | This table specifies PW MPLS OAM capability and associated information, such as DetType and DetFrequence. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1 | RowhwMplsOamL2vcEntry | not-accessible | current | An entry in this table is created by binding the peer-ip, vc-type and vc-id. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.1 | ColumnhwMplsOamL2vcPeerIp | accessible-for-notify | current | This object indicates the peer ip address. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.2 | ColumnhwMplsOamL2vcVcType | accessible-for-notify | current | There are seventeen types of vc. 1: fr; 2: atmAal5Sdu; 3: atmTransCell; 4: vlan; 5: ethernet; 6: hdlc; 7: ppp; 9: atmNto1Vcc; 10:atmNto1Vpc; 11:ipLayer2; 12:at… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.3 | ColumnhwMplsOamL2vcVcId | accessible-for-notify | current | This object indicates the vc id of pw type. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.4 | ColumnhwMplsOamL2vcRemotePeerIp | read-create | current | This object indicates the remote peer ip address. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.5 | ColumnhwMplsOamL2vcRemoteVcType | read-create | current | There are seventeen types of vc. 1: fr; 2: atmAal5Sdu; 3: atmTransCell; 4: vlan; 5: ethernet; 6: hdlc; 7: ppp; 9: atmNto1Vcc; 10:atmNto1Vpc; 11:ipLayer2; 12:at… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.6 | ColumnhwMplsOamL2vcRemoteVcId | read-create | current | This object indicates the remote vc id of pw type. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.7 | ColumnhwMplsOamL2vcDetType | read-create | current | There are two types of OAM packets, CV and FFD. 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.8 | ColumnhwMplsOamL2vcDetFreq | read-create | current | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequenc… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.9 | ColumnhwMplsOamL2vcRevDetType | read-only | current | 0: invalid; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.10 | ColumnhwMplsOamL2vcRevDetFreq | read-only | current | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequenc… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.11 | ColumnhwMplsOamL2vcSendEnable | read-create | current | 0: The OAM Send function is Disabled; 1: The OAM Send function is Eabled; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.12 | ColumnhwMplsOamL2vcReceiveEnable | read-create | current | 0: The OAM Receive function is Disabled; 1: The OAM Receive function is Eabled; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.13 | ColumnhwMplsOamL2vcAutoProlEn | read-create | current | 0: disable; 1: enable; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.14 | ColumnhwMplsOamL2vcAutoOvertime | read-create | current | If the oam receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the oam does not receive any CV/FFD packet bef… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.15 | ColumnhwMplsOamL2vcValid | read-only | current | 1: stop detect; 2: start detect; 3: ready. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.16 | ColumnhwMplsOamL2vcAvaState | read-only | current | 0: available state; 1: unavailable state. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17 | ColumnhwMplsOamL2vcDefectType | read-only | current | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.18 | ColumnhwMplsOamL2vcBdiDefectType | read-only | current | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.30 | ColumnhwMplsOamL2vcRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.31 | ColumnhwMplsOamL2vcCompatibilityMode | read-create | current | 1: ptnMode; 2: routerMode; Valid only for the l2vc configuration. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.32 | ColumnhwMplsOamL2vcBDIFreq | read-create | current | BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the f… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7 | TablehwMplsOamBidirectionalTunnelTable | not-accessible | current | This table specifies Static Co-Route MPLS OAM capability and associated information, such as DetType and DetFrequence. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1 | RowhwMplsOamBidirectionalTunnelEntry | not-accessible | current | An entry in this table is created by binding the tunnel ifindex. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.1 | ColumnhwMplsOamBidirectionalTunnelIndex | accessible-for-notify | current | This is a unique index for an OAM entry in the OAM table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.2 | ColumnhwMplsOamBidirectionalTunnelTunnName | read-create | current | The name of a tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.3 | ColumnhwMplsOamBidirectionalTunnelDetType | read-create | current | There are two types of OAM packets, CV and FFD. 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.4 | ColumnhwMplsOamBidirectionalTunnelDetFreq | read-create | current | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequenc… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.5 | ColumnhwMplsOamBidirectionalTunnelRevDetType | read-only | current | 0: invalid; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.6 | ColumnhwMplsOamBidirectionalTunnelRevDetFreq | read-only | current | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequenc… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.7 | ColumnhwMplsOamBidirectionalTunnelSendEnable | read-create | current | 0: The OAM Send function is Disabled; 1: The OAM Send function is Eabled; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.8 | ColumnhwMplsOamBidirectionalTunnelReceiveEnable | read-create | current | 0: The OAM Receive function is Disabled; 1: The OAM Receive function is Eabled; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.9 | ColumnhwMplsOamBidirectionalTunnelAutoProtocolEnable | read-create | current | 0: disable; 1: enable; |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.10 | ColumnhwMplsOamBidirectionalTunnelAutoOvertime | read-create | current | If the oam receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the oam does not receive any CV/FFD packet bef… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.11 | ColumnhwMplsOamBidirectionalTunnelValid | read-only | current | 1: stop detect; 2: start detect; 3: ready. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.12 | ColumnhwMplsOamBidirectionalTunnelAvaState | read-only | current | 0: available state; 1: unavailable state. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.13 | ColumnhwMplsOamBidirectionalTunnelDefectType | read-only | current | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.14 | ColumnhwMplsOamBidirectionalTunnelBdiDefectType | read-only | current | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.15 | ColumnhwMplsOamBidirectionalTunnelRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.16 | ColumnhwMplsOamBidirectionalTunnelCompatibilityMode | read-create | current | 1: ptnMode; 2: routerMode; Valid only for the bidirectional tunnel configuration. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.17 | ColumnhwMplsOamBidirectionalTunnelBDIFreq | read-create | current | BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the f… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.8 | ScalarhwMplsOamTrapOpen | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.2011.5.12.7.1.2 | NodehwMplsOamNotifications | |||
| 1.3.6.1.4.1.2011.5.12.7.1.2.1 | NotificationhwMplsOamIgrLSPOutDefect | current | This notification is generated when the LSP is found not in the defect state at the LSP ingress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.2 | NotificationhwMplsOamIgrLSPInDefect | current | This notification is generated when the LSP is found in the defect state at the LSP ingress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.3 | NotificationhwMplsOamIgrLSPAva | current | This notification is generated when the LSP is found in the available state at the LSP ingress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.4 | NotificationhwMplsOamIgrLSPUnAva | current | This notification is generated when the LSP is found in the unavailable state at the LSP ingress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.5 | NotificationhwMplsOamEgrLSPOutDefect | current | This notification is generated when the LSP is found not in the defect state at the LSP egress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.6 | NotificationhwMplsOamEgrLSPInDefect | current | This notification is generated when the LSP is found in the defect state at the LSP egress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.7 | NotificationhwMplsOamEgrLSPAva | current | This notification is generated when the LSP is found in the available state at the LSP egress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.8 | NotificationhwMplsOamEgrLSPUnAva | current | This notification is generated when the LSP is found in the unavailable state at the LSP egress. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.9 | NotificationhwMplsOamEgrFirstPkt | current | If autoprotocol is enabled, this notification is generated when egress receives the first CV/FFD packet. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.10 | NotificationhwMplsOamEgrAutoProFDI | current | The FDI packet is used by the upstream node in an LSP to inform the egress of the defect information. It is also generated when the auto protocol is enabled, w… | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.11 | NotificationhwMplsOamEgrRlsnDown | current | This notification is generated when the Rlsn is down. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.12 | NotificationhwMplsOamL2vcOutDefect | current | This notification is generated when the PW is found not in the defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.13 | NotificationhwMplsOamL2vcInDefect | current | This notification is generated when the PW is found not in the defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.14 | NotificationhwMplsOamL2vcAva | current | This notification is generated when the PW is found in the unavailable state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.15 | NotificationhwMplsOamL2vcUnAva | current | This notification is generated when the PW is found in the unavailable state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.16 | NotificationhwMplsOamBidirectionalTunnelOutDefect | current | This notification is generated when the CO-ROUTE is found not in the defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.17 | NotificationhwMplsOamBidirectionalTunnelInDefect | current | This notification is generated when the CO-ROUTE is found not in the defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.18 | NotificationhwMplsOamBidirectionalTunnelAva | current | This notification is generated when the CO-ROUTE is found in the unavailable state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.2.19 | NotificationhwMplsOamBidirectionalTunnelUnAva | current | This notification is generated when the CO-ROUTE is found in the unavailable state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.3 | NodehwMplsPsObjects | |||
| 1.3.6.1.4.1.2011.5.12.7.1.3.1 | TablehwMplsPsTable | not-accessible | current | This table specifies per-protection-group MPLS PS capability and associated information. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1 | RowhwMplsPsEntry | not-accessible | current | An entry in this table is created by an LSR for every protection group capable of supporting mpls ps. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.1 | ColumnhwMplsPsIndex | read-only | current | This is a unique index for an entry in the mplspsEntry. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.2 | ColumnhwMplsPsType | read-only | current | The type of protection switch,can be 1:1,1+1,shared mesh, packet 1+1,the default choice is 1:1. In the 1+1 architecture type, a protection LSP is dedicated to … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3 | ColumnhwMplsPsWorkTunnName | read-only | current | The name of work-tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.4 | ColumnhwMplsPsWorkTunnId | read-only | current | Work-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.5 | ColumnhwMplsPsProtectTunnName | read-only | current | The name of protect-tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.6 | ColumnhwMplsPsProtectTunnId | read-only | current | Protect-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.7 | ColumnhwMplsPsRevertiveMode | read-only | current | Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired.And switching … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.8 | ColumnhwMplsPsWTR | read-only | current | Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP,It prevents reversion back to select the working LSP until the Wai… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.9 | ColumnhwMplsPsHoldOff | read-only | current | The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. step is 100ms.maximum is 10s. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.10 | ColumnhwMplsPsSwitchCondition | read-only | current | The current switch condition of the protection group. 1: clear,This command clears all of the externally initiated switch commands listed below; 2: lockout of … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.11 | ColumnhwMplsPsWorkTunnelState | read-only | current | The state of working tunnel state in one protection group, whether it is in detection, 1: it is outof defect 2: it enters defect |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.12 | ColumnhwMplsPsProtTunnelState | read-only | current | The state of protection tunnel state in one protection group, whether it is in detection, 1: it is outof defect 2: it enters defect |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.13 | ColumnhwMplsPsSwitchResult | read-only | current | Which tunnel is used to transfer the data stream. 1: working-tunnel 2: protection-tunnel |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.14 | ColumnhwMplsPsCfgType | read-only | current | The type of protection switch which is configured. 1: 1:1 2: 1+1 3: shared mesh 4: packet 1:1 |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.15 | ColumnhwMplsPsCfgProtectTunnId | read-only | current | Protect-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.16 | ColumnhwMplsPsCfgRevertiveMode | read-only | current | Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired.And switching … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.17 | ColumnhwMplsPsCfgWTR | read-only | current | Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP,It prevents reversion back to select the working LSP until the Wai… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.18 | ColumnhwMplsPsCfgHoldOff | read-only | current | The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. step is 100ms.maximum is 10s. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.19 | ColumnhwMplsPsRowStatus | read-create | current | This variable is used to create, modify, and delete a row in this table. 1: active 2: not in service 3: not ready 4: create and go 5: create and wait 6: destroy |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.20 | ColumnhwMplsPsLocalState | read-only | current | The current local state of the protection group. 0: Lockout of Protection (LO) 1: Signal Fail for Protection (SF-P) 2: Forced Switch (FS) 3: Signal Fail for Wo… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.2 | ScalarhwTunnPsTrapOpen | read-only | current | 1:enable; 2:disable; |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3 | TablehwMplsVCPsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1 | RowhwMplsVCPsEntry | not-accessible | current | this table for these commands 1.mpls te protection tunnel XXX 2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x } 3. mpls te reserved-for-bin… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.1 | ColumnhwMplsVCPsIfIndex | read-only | current | Description.the index of working tunnel interface of Protection group |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.2 | ColumnhwMplsVCPsTNLBinding | read-create | current | Description.it is used by command ' mpls te reserved-for-binding ' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.3 | ColumnhwMplsTeReverseLspName | read-create | current | Description.it is used for command ' mpls te reverse-lsp lspname' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.4 | ColumnhwMplsVcPsRowStatus | read-create | current | Description. 1: active; 2: notInservice; 3: notReady; 4: CreateAndGo; 5: CreateAndWait; 6: destroy; |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.5 | ColumnhwMplsTeReverseLspLsrId | read-create | current | Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.6 | ColumnhwMplsTeReverseLspTunnId | read-create | current | Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.4 | ScalarhwMplsApsMismatchReason | accessible-for-notify | current | Indicates the alarm reason as below: 1. Bridge type mismatch, one side is 1:1 (Selector Bridge) protection, the other side is 1+1 (Permanent Bridge) protection… |
| 1.3.6.1.4.1.2011.5.12.7.1.4 | NodehwMplsPsNotifications | |||
| 1.3.6.1.4.1.2011.5.12.7.1.4.1 | NotificationhwMplsPsSwitchPtoW | current | This notification is generated when switching from protection-lsp to working-lsp occured. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.2 | NotificationhwMplsPsSwitchWtoP | current | This notification is generated when switching from woking-lsp to protection-lsp occured. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.3 | NotificationhwMplsApsMismatch | current | Trap information indicates fully incompatible provisioning and working/protection configuration mismatch are detected by APS frame. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.4 | NotificationhwMplsApsMismatchRecovery | current | Trap information indicates fully incompatible provisioning and working/protection configuration mismatch recovery are detected by APS frame. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.5 | NotificationhwMplsApsLost | current | Tunnel protection group did not receive APS frames from protection tunnel. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.6 | NotificationhwMplsApsLostRecovery | current | Tunnel protection group received APS frames from protection tunnel. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.7 | NotificationhwMplsApsOutage | current | Tunnel protection group changed to defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.8 | NotificationhwMplsApsOutageRecovery | current | Tunnel protection group recovered from defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.9 | NotificationhwMplsApsDegraded | current | Protection tunnel changed to defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.10 | NotificationhwMplsApsDegradedRecovery | current | Protection tunnel recovered from defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.11 | NotificationhwMplsApsSwitchFail | current | Tunnel protection group changed to defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.12 | NotificationhwMplsApsSwitchFailRecovery | current | Tunnel protection group recovered from defect state. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100 | NodehwMplsOamPsConformance | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.1 | NodehwMplsOamPsCompliances | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.1.1 | CompliancehwMplsOamPsGroupCompliance | current | The compliance statement for mpls oam ps. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2 | NodehwMplsOamPsGroups | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.1 | GrouphwMplsPsGroup | current | The compliance statement for mpls oam ps management. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.2 | GrouphwMplsVcPsGroup | current | The compliance statement for mpls oam ps reverse lsp. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.3 | GrouphwMplsPsNotificationGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.12.7.1.101 | NodehwMplsOamObjectConformance | |||
| 1.3.6.1.4.1.2011.5.12.7.1.101.1 | NodehwMplsOamObjectGroups | |||
| 1.3.6.1.4.1.2011.5.12.7.1.101.1.1 | GrouphwMplsOamObjectGroup | current | The compliance statement for mpls oam all. | |
| 1.3.6.1.4.1.2011.5.12.7.1.101.1.2 | GrouphwMplsOamNotificationGroup | current | The compliance statement for mpls oam trap. | |
| 1.3.6.1.4.1.2011.5.12.7.1.101.2 | NodehwMplsOamObjectCompliances |