HUAWEI-MPLSOAM-PS-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| HUAWEI-MPLSOAM-MIB | hwMplsOam |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7.1 | NodehwMplsOamPs | |||
| 1.3.6.1.4.1.2011.5.12.7.1.3 | NodehwMplsPsObjects | |||
| 1.3.6.1.4.1.2011.5.12.7.1.3.1 | TablehwMplsPsTable | not-accessible | current | This table specifies per-protection-group MPLS PS capability and associated information. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1 | RowhwMplsPsEntry | not-accessible | current | An entry in this table is created by an LSR for every protection group capable of supporting mpls ps. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.1 | ColumnhwMplsPsIndex | read-only | current | This is a unique index for an entry in the mplspsEntry. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.2 | ColumnhwMplsPsType | read-only | current | The type of protection switch,can be 1:1,1+1,shared mesh, packet 1+1,the default choice is 1:1. In the 1+1 architecture type, a protection LSP is dedicated to … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3 | ColumnhwMplsPsWorkTunnName | read-create | current | The name of work-tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.4 | ColumnhwMplsPsWorkTunnId | read-only | current | Work-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.5 | ColumnhwMplsPsProtectTunnName | read-only | current | The name of protect-tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.6 | ColumnhwMplsPsProtectTunnId | read-only | current | Protect-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.7 | ColumnhwMplsPsRevertiveMode | read-only | current | Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired.And switching … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.8 | ColumnhwMplsPsWTR | read-only | current | Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP,It prevents reversion back to select the working LSP until the Wai… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.9 | ColumnhwMplsPsHoldOff | read-only | current | The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. step is 100ms.maximum is 10s. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.10 | ColumnhwMplsPsSwitchCondition | read-write | current | The current switch condition of the protection group. 1: clear,This command clears all of the externally initiated switch commands listed below; 2: lockout of … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.11 | ColumnhwMplsPsWorkTunnelState | read-only | current | The state of working tunnel state in one protection group, whether it is in detection, 1: it is outof defect 2: it enters defect |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.12 | ColumnhwMplsPsProtTunnelState | read-only | current | The state of protection tunnel state in one protection group, whether it is in detection, 1: it is outof defect 2: it enters defect |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.13 | ColumnhwMplsPsSwitchResult | read-only | current | Which tunnel is used to transfer the data stream. 1: working-tunnel 2: protection-tunnel |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.14 | ColumnhwMplsPsCfgType | read-only | current | The type of protection switch which is configured. 1: 1:1 2: 1+1 3: shared mesh 4: packet 1:1 |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.15 | ColumnhwMplsPsCfgProtectTunnId | read-create | current | Protect-tunnel id(session-tunnel-id). |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.16 | ColumnhwMplsPsCfgRevertiveMode | read-create | current | Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired.And switching … |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.17 | ColumnhwMplsPsCfgWTR | read-create | current | Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP,It prevents reversion back to select the working LSP until the Wai… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.18 | ColumnhwMplsPsCfgHoldOff | read-write | current | The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. step is 100ms.maximum is 10s. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.1.1.19 | ColumnhwMplsPsRowStatus | read-write | current | This variable is used to create, modify, and delete a row in this table. 1: active 2: not in service 3: not ready 4: create and go 5: create and wait 6: destroy |
| 1.3.6.1.4.1.2011.5.12.7.1.3.2 | ScalarhwTunnPsTrapOpen | read-write | current | 1:enable; 2:disable; |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3 | TablehwMplsVCPsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1 | RowhwMplsVCPsEntry | not-accessible | current | this table for these commands 1.mpls te protection tunnel XXX 2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x } 3. mpls te reserved-for-bin… |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.1 | ColumnhwMplsVCPsIfIndex | read-only | current | Description.the index of working tunnel interface of Protection group |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.2 | ColumnhwMplsVCPsTNLBinding | read-create | current | Description.it is used by command ' mpls te reserved-for-binding ' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.3 | ColumnhwMplsTeReverseLspName | read-create | current | Description.it is used for command ' mpls te reverse-lsp lspname' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.4 | ColumnhwMplsVcPsRowStatus | read-create | current | Description. 1: active; 2: notInservice; 3: notReady; 4: CreateAndGo; 5: CreateAndWait; 6: destroy; |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.5 | ColumnhwMplsTeReverseLspLsrId | read-create | current | Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX' |
| 1.3.6.1.4.1.2011.5.12.7.1.3.3.1.6 | ColumnhwMplsTeReverseLspTunnId | read-create | current | Description.it is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX' |
| 1.3.6.1.4.1.2011.5.12.7.1.4 | NodehwMplsPsNotifications | |||
| 1.3.6.1.4.1.2011.5.12.7.1.4.1 | NotificationhwMplsPsSwitchPtoW | current | This notification is generated when switching from protection-lsp to working-lsp occured. | |
| 1.3.6.1.4.1.2011.5.12.7.1.4.2 | NotificationhwMplsPsSwitchWtoP | current | This notification is generated when switching from woking-lsp to protection-lsp occured. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100 | NodehwMplsOamPsConformance | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.1 | NodehwMplsOamPsCompliances | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.1.1 | CompliancehwMplsOamPsGroupCompliance | current | The compliance statement for mpls oam ps. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2 | NodehwMplsOamPsGroups | |||
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.1 | GrouphwMplsPsGroup | current | The compliance statement for mpls oam ps management. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.2 | GrouphwMplsVcPsGroup | current | The compliance statement for mpls oam ps reverse lsp. | |
| 1.3.6.1.4.1.2011.5.12.7.1.100.2.3 | GrouphwMplsPsNotificationGroup | current | Description. |